summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/marvell
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2024-05-07 11:05:10 +0300
committerArnd Bergmann <arnd@arndb.de>2024-05-07 11:05:10 +0300
commit8db93c212e64301d47855ca77660e360dc22b224 (patch)
tree70b0609936aede3b7744fc47c4d5a118ad7b0d0e /arch/arm64/boot/dts/marvell
parentd10ee71072e429573d84c7dea9cecf12aa852636 (diff)
parent4289937de5ca3d82e4ee70f30e30f9f0cdcda6a2 (diff)
downloadlinux-8db93c212e64301d47855ca77660e360dc22b224.tar.xz
Merge tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.10 (part 1) Few dts fix for dt validation * tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells arm64: dts: marvell: eDPU: drop redundant address/size-cells arm64: dts: marvell: cn9130-crb: drop unneeded "status" arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses arm64: dts: marvell: cn9130-db: drop wrong unit-addresses arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells arm64: dts: marvell: ap80x: fix IOMMU unit address Link: https://lore.kernel.org/r/87jzk8ndyy.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64/boot/dts/marvell')
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts98
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap80x.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/cn9130-crb.dtsi13
-rw-r--r--arch/arm64/boot/dts/marvell/cn9130-db.dtsi18
-rw-r--r--arch/arm64/boot/dts/marvell/cn9131-db.dtsi8
-rw-r--r--arch/arm64/boot/dts/marvell/cn9132-db.dtsi12
8 files changed, 88 insertions, 67 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
index d6d37a1f6f38..91c2f8b4edfa 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
@@ -25,8 +25,6 @@
/* Actual device is MV88E6361 */
switch: switch@0 {
compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index 870bb380a40a..b3cc2b7b5d19 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -114,54 +114,84 @@
};
&mdio {
+ /* Switch is @3, not @1 */
+ /delete-node/ ethernet-switch@1;
extphy: ethernet-phy@1 {
reg = <1>;
reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
};
-};
-&switch0 {
- reg = <3>;
+ switch0: ethernet-switch@3 {
+ compatible = "marvell,mv88e6085";
+ reg = <3>;
- reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+ dsa,member = <0 0>;
- ethernet-ports {
- switch0port1: ethernet-port@1 {
- reg = <1>;
- label = "lan0";
- phy-handle = <&switch0phy0>;
- };
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0port0: ethernet-port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
- switch0port2: ethernet-port@2 {
- reg = <2>;
- label = "lan1";
- phy-handle = <&switch0phy1>;
- };
+ switch0port1: ethernet-port@1 {
+ reg = <1>;
+ label = "lan0";
+ phy-handle = <&switch0phy0>;
+ };
- switch0port3: ethernet-port@3 {
- reg = <3>;
- label = "lan2";
- phy-handle = <&switch0phy2>;
- };
+ switch0port2: ethernet-port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
- switch0port4: ethernet-port@4 {
- reg = <4>;
- label = "lan3";
- phy-handle = <&switch0phy3>;
- };
+ switch0port3: ethernet-port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ };
- switch0port5: ethernet-port@5 {
- reg = <5>;
- label = "wan";
- phy-handle = <&extphy>;
- phy-mode = "sgmii";
+ switch0port4: ethernet-port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ switch0port5: ethernet-port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-handle = <&extphy>;
+ phy-mode = "sgmii";
+ };
};
- };
- mdio {
- switch0phy3: ethernet-phy@14 {
- reg = <0x14>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ switch0phy3: ethernet-phy@14 {
+ reg = <0x14>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index f1a9f2234359..54453b0a91f9 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -216,8 +216,6 @@
assigned-clock-rates = <20000000>;
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 7ec7c789d87e..fdf88cd0eb02 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -61,7 +61,7 @@
compatible = "simple-bus";
ranges = <0x0 0x0 0xf0000000 0x1000000>;
- smmu: iommu@5000000 {
+ smmu: iommu@100000 {
compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
reg = <0x100000 0x100000>;
dma-coherent;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 6fcc34f7b464..5e7d6de3cdde 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -26,7 +26,7 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+ ap0_reg_mmc_vccq: regulator-1 {
compatible = "regulator-gpio";
regulator-name = "ap0_mmc_vccq";
regulator-min-microvolt = <1800000>;
@@ -36,7 +36,7 @@
3300000 0x0>;
};
- cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ cp0_reg_usb3_vbus1: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -45,16 +45,16 @@
gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy0: cp0_usb3_phy0 {
+ cp0_usb3_0_phy0: usb-phy-1 {
compatible = "usb-nop-xceiv";
};
- cp0_usb3_0_phy1: cp0_usb3_phy1 {
+ cp0_usb3_0_phy1: usb-phy-2 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus1>;
};
- cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ cp0_reg_sd_vccq: regulator-3 {
compatible = "regulator-gpio";
regulator-name = "cp0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
3300000 0x0>;
};
- cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ cp0_reg_sd_vcc: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "cp0_sd_vcc";
regulator-min-microvolt = <3300000>;
@@ -82,7 +82,6 @@
tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
- status = "okay";
};
};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 6eb6a175de38..be56a2336265 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -30,7 +30,7 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+ ap0_reg_sd_vccq: regulator-1 {
compatible = "regulator-gpio";
regulator-name = "ap0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -39,7 +39,7 @@
states = <1800000 0x1 3300000 0x0>;
};
- cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+ cp0_reg_usb3_vbus0: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci0-vbus";
regulator-min-microvolt = <5000000>;
@@ -48,12 +48,12 @@
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+ cp0_usb3_0_phy0: usb-phy-1 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus0>;
};
- cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ cp0_reg_usb3_vbus1: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -62,12 +62,12 @@
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+ cp0_usb3_0_phy1: usb-phy-2 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus1>;
};
- cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ cp0_reg_sd_vccq: regulator-4 {
compatible = "regulator-gpio";
regulator-name = "cp0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
3300000 0x0>;
};
- cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ cp0_reg_sd_vcc: regulator-5 {
compatible = "regulator-fixed";
regulator-name = "cp0_sd_vcc";
regulator-min-microvolt = <3300000>;
@@ -87,7 +87,7 @@
regulator-always-on;
};
- cp0_sfp_eth0: sfp-eth@0 {
+ cp0_sfp_eth0: sfp-eth-1 {
compatible = "sff,sfp";
i2c-bus = <&cp0_sfpp0_i2c>;
los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
@@ -311,8 +311,6 @@
reg = <0x700680 0x50>;
flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
/* On-board MUX does not allow higher frequencies */
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index ff8422fae31b..ad7360c83048 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -18,7 +18,7 @@
ethernet4 = &cp1_eth1;
};
- cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+ cp1_reg_usb3_vbus0: regulator-6 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&cp1_xhci0_vbus_pins>;
@@ -29,12 +29,12 @@
gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
};
- cp1_usb3_0_phy0: cp1_usb3_phy0 {
+ cp1_usb3_0_phy0: usb-phy-3 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp1_reg_usb3_vbus0>;
};
- cp1_sfp_eth1: sfp-eth1 {
+ cp1_sfp_eth1: sfp-eth-2 {
compatible = "sff,sfp";
i2c-bus = <&cp1_i2c0>;
los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
@@ -138,8 +138,6 @@
reg = <0x700680 0x50>;
flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
/* On-board MUX does not allow higher frequencies */
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index 512a4fa2861e..e753cfdac697 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -17,7 +17,7 @@
ethernet5 = &cp2_eth0;
};
- cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+ cp2_reg_usb3_vbus0: regulator-7 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci0-vbus";
regulator-min-microvolt = <5000000>;
@@ -26,12 +26,12 @@
gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
};
- cp2_usb3_0_phy0: cp2_usb3_phy0 {
+ cp2_usb3_0_phy0: usb-phy-4 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus0>;
};
- cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+ cp2_reg_usb3_vbus1: regulator-8 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -40,12 +40,12 @@
gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
};
- cp2_usb3_0_phy1: cp2_usb3_phy1 {
+ cp2_usb3_0_phy1: usb-phy-5 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus1>;
};
- cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+ cp2_reg_sd_vccq: regulator-9 {
compatible = "regulator-gpio";
regulator-name = "cp2_sd_vcc";
regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@
states = <1800000 0x1 3300000 0x0>;
};
- cp2_sfp_eth0: sfp-eth0 {
+ cp2_sfp_eth0: sfp-eth-3 {
compatible = "sff,sfp";
i2c-bus = <&cp2_sfpp0_i2c>;
los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;