ARM: dts: allwinner: Split out non-SoC specific parts of Neutis N5

A new variant of Emlid Neutis has been inroduced. This one uses H3
instead of H5. The boards are essentially the same. This commit moves
non-SoC-specific parts out so that the common parts could be reused with
ease.

Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

2 files changed, 5 insertions, 143 deletions

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
index c924090331d0..d6cc6592cfa3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -15,14 +15,6 @@
 		     "emlid,neutis-n5",
 		     "allwinner,sun50i-h5";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -34,16 +26,6 @@
 		};
 	};
 
-	reg_usb0_vbus: usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
-		status = "okay";
-	};
-
 	vdd_cpux: gpio-regulator {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-cpux";
@@ -59,33 +41,11 @@
 	};
 };
 
-&codec {
-	allwinner,audio-routing =
-		"Line Out", "LINEOUT",
-		"LINEIN", "Line In",
-		"MIC1", "Mic",
-		"MIC2", "Mic",
-		"Mic",  "MBIAS";
-	status = "okay";
-};
-
-&de {
-	status = "okay";
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
 };
 
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&ehci2 {
-	status = "okay";
-};
-
-&ehci3 {
+&codec {
 	status = "okay";
 };
 
@@ -106,42 +66,6 @@
 	};
 };
 
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pa_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
+&i2c1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
index 5bec574fa108..7df7308ec9f0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -8,66 +8,4 @@
 /dts-v1/;
 
 #include "sun50i-h5.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
-		post-power-on-delay-ms = <200>;
-		clocks = <&rtc 1>;
-		clock-names = "ext_clock";
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&r_pio>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
-		interrupt-names = "host-wake";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
-		clock-names = "lpo";
-		vbat-supply = <&reg_vcc3v3>;
-		vddio-supply = <&reg_vcc3v3>;
-		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
-		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
-	};
-};
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>