summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
diff options
context:
space:
mode:
authorRohit Agarwal <quic_rohiagar@quicinc.com>2023-08-07 16:38:50 +0300
committerBjorn Andersson <andersson@kernel.org>2023-08-14 06:05:06 +0300
commit0d64992d8589f21ac4997ef0acbf0d23ccb1f259 (patch)
tree1a344727f7616be360c659bbd97707a801a262b0 /arch/arm64/boot
parent5f78e80ca7222a0c8da014400591fc70c8f6434a (diff)
downloadlinux-0d64992d8589f21ac4997ef0acbf0d23ccb1f259.tar.xz
arm64: dts: qcom: Add pmx75 PMIC dtsi
Add dtsi for pmx75 PMIC found in Qualcomm platforms. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-6-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Diffstat (limited to 'arch/arm64/boot')
-rw-r--r--arch/arm64/boot/dts/qcom/pmx75.dtsi64
1 files changed, 64 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/pmx75.dtsi b/arch/arm64/boot/dts/qcom/pmx75.dtsi
new file mode 100644
index 000000000000..373e45f63dff
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmx75.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ thermal-zones {
+ pmx75-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pmx75_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+
+ trip2 {
+ temperature = <145000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pmx75: pmic@1 {
+ compatible = "qcom,pmx75", "qcom,spmi-pmic";
+ reg = <1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmx75_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmx75_gpios: gpio@8800 {
+ compatible = "qcom,pmx75-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmx75_gpios 0 0 16>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};