diff options
author | Kevin Hilman <khilman@baylibre.com> | 2021-04-21 23:48:32 +0300 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2021-04-23 00:19:46 +0300 |
commit | d9421d6c52942be85c42fe63bdcf2ce43d1a4b0e (patch) | |
tree | e603d5f540f22be4f03eb6b5801ad9c3de9afa6c /arch/arm64/boot | |
parent | d028b508c112b0414ec60163c2cca0ca3a478709 (diff) | |
download | linux-d9421d6c52942be85c42fe63bdcf2ce43d1a4b0e.tar.xz |
arm64: dts: amlogic: misc DT schema fixups
Take a pass at cleaning up a bunch of warnings
from 'make dtbs_check' that have crept in.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210421204833.18523-1-khilman@baylibre.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64/boot')
15 files changed, 27 insertions, 28 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index 755b4ad15184..b4000cf65a9a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -88,13 +88,13 @@ #reset-cells = <1>; }; - periphs_pinctrl: pinctrl@0400 { + periphs_pinctrl: pinctrl@400 { compatible = "amlogic,meson-a1-periphs-pinctrl"; #address-cells = <2>; #size-cells = <2>; ranges; - gpio: bank@0400 { + gpio: bank@400 { reg = <0x0 0x0400 0x0 0x003c>, <0x0 0x0480 0x0 0x0118>; reg-names = "mux", "gpio"; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index d945c84ab697..895c43c7af9f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1731,7 +1731,6 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc CLKID_VAPB>; resets = <&reset RESET_GE2D>; - reset-names = "core"; }; gic: interrupt-controller@ffc01000 { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 3dd2a5a8739b..793d48f72390 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -128,9 +128,9 @@ pcie: pcie@fc000000 { compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; - reg = <0x0 0xfc000000 0x0 0x400000 - 0x0 0xff648000 0x0 0x2000 - 0x0 0xfc400000 0x0 0x200000>; + reg = <0x0 0xfc000000 0x0 0x400000>, + <0x0 0xff648000 0x0 0x2000>, + <0x0 0xfc400000 0x0 0x200000>; reg-names = "elbi", "cfg", "config"; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; @@ -140,8 +140,8 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 - 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; + ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>, + <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; clocks = <&clkc CLKID_PCIE_PHY &clkc CLKID_PCIE_COMB @@ -2009,7 +2009,7 @@ }; }; - vrtc: rtc@0a8 { + vrtc: rtc@a8 { compatible = "amlogic,meson-vrtc"; reg = <0x0 0x000a8 0x0 0x4>; }; @@ -2187,7 +2187,7 @@ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; }; - watchdog: wdt@f0d0 { + watchdog: watchdog@f0d0 { compatible = "amlogic,meson-gxbb-wdt"; reg = <0x0 0xf0d0 0x0 0x10>; clocks = <&xtal>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts index 211191f66344..6c7bfacbad78 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -12,7 +12,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gsking-x", "amlogic,g12b"; + compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GS-King X"; aliases { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 0e331aa5a2d7..707daf92787b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -11,7 +11,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gtking", "amlogic,g12b"; + compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GT-King Pro"; aliases { @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - white { + led-white { label = "power:white"; gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index a7db84a500bb..5d96c1449050 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -11,7 +11,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gtking", "amlogic,g12b"; + compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GT-King"; aliases { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 473b81c652cf..344573e157a7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -42,7 +42,7 @@ leds { compatible = "gpio-leds"; - blue { + led-blue { label = "n2:blue"; gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -497,7 +497,7 @@ * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index bfaf7f41a2d6..201596247fd9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -257,7 +257,7 @@ * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts index 5ab5d3aa0646..c529b6c860a4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts @@ -44,7 +44,7 @@ leds { compatible = "gpio-leds"; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_POWER; gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts index ad6d72254150..b331a013572f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts @@ -16,28 +16,28 @@ leds { compatible = "gpio-leds"; - yellow { + led-yellow { color = <LED_COLOR_ID_YELLOW>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - green { + led-green { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - red { + led-red { color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts index 0651756d7fb5..ebebf344b715 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts @@ -49,7 +49,7 @@ leds { compatible = "gpio-leds"; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_POWER; gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts index a414cd39c2b1..ea9f234d1fc7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts @@ -17,7 +17,7 @@ leds { compatible = "gpio-leds"; - white { + led-white { color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_POWER; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts index ec794c134c15..1e7f77f9b533 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts @@ -22,7 +22,7 @@ leds { compatible = "gpio-leds"; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 877e3b989203..66d67524b031 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -43,14 +43,14 @@ leds { compatible = "gpio-leds"; - white { + led-white { color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - red { + led-red { color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index b2a4e823c1d8..8c327c03d845 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -47,7 +47,7 @@ * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; |