diff options
| author | Madalin Bucur <madalin.bucur@oss.nxp.com> | 2020-03-16 15:05:57 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-04-02 17:34:38 +0300 |
| commit | a34bb888980be1fa40117512c34cbf1da3231056 (patch) | |
| tree | 5da05763a3be439890e7d2fa7c703da2c5947458 /arch/arm64 | |
| parent | 93431d69e69969bd589a809a5cb967fd94fb52c9 (diff) | |
| download | linux-a34bb888980be1fa40117512c34cbf1da3231056.tar.xz | |
arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id
commit 4022d808c45277693ea86478fab1f081ebf997e8 upstream.
The correct setting for the RGMII ports on LS1043ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii_txid".
This issue was not apparent at the time as the PHY driver took the
same action for RGMII_TXID and RGMII_ID back then but it became
visible (RX no longer working) after the above patch.
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'arch/arm64')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 3dc0c8e9663d..3aead63e5475 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -155,12 +155,12 @@ ethernet@e4000 { phy-handle = <&rgmii_phy1>; - phy-connection-type = "rgmii-txid"; + phy-connection-type = "rgmii-id"; }; ethernet@e6000 { phy-handle = <&rgmii_phy2>; - phy-connection-type = "rgmii-txid"; + phy-connection-type = "rgmii-id"; }; ethernet@e8000 { |