diff options
author | Arnd Bergmann <arnd@arndb.de> | 2022-09-23 18:47:08 +0300 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2022-09-23 18:47:08 +0300 |
commit | 141258d4301e0dd8b73e22a2b77d8a0f3e84cd76 (patch) | |
tree | 86b77472efc550ba2db61c823df0d56900e1451d /arch/arm64 | |
parent | 6972b275fedc1996cad03e8926f7f3ea03443e6b (diff) | |
parent | 2b14d382ec97ca5b420239ee6e16da390fab476c (diff) | |
download | linux-141258d4301e0dd8b73e22a2b77d8a0f3e84cd76.tar.xz |
Merge tag 'mvebu-dt64-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 6.1 (part 1)
- Add UART1-3 for AC5/AC5X SoC
- Improve uDPU support (Aramda 3720 based board)
- Add new eDPU based on uDPU
* tag 'mvebu-dt64-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios
arm64: dts: marvell: add support for Methode eDPU
dt-bindings: marvell: armada-37xx: add Methode eDPU compatible
arm64: dts: marvell: split Methode uDPU DTS
arm64: dts: marvell: rename temp sensor nodes
arm64: dts: marvell: uDPU: remove LED node pinctrl-names
arm64: dts: marvell: uDPU: align LED-s with bindings
arm64: dts: marvell: uDPU: add missing SoC compatible
arm64: dts: marvell: espressobin-ultra: add generic Espressobin compatible
dt-bindings: marvell: convert Armada 37xx compatibles to YAML
dt-bindings: vendor-prefixes: add Methode Electronics
arm64: dts: marvell: Add UART1-3 for AC5/AC5X
Link: https://lore.kernel.org/r/87h70yxfmy.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64')
-rw-r--r-- | arch/arm64/boot/dts/marvell/Makefile | 1 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 38 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts | 4 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 155 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi | 160 |
6 files changed, 213 insertions, 159 deletions
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index b6d493e34dc5..058237681fe5 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 80b44c7df56a..44ed6f963b75 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -95,6 +95,36 @@ status = "okay"; }; + uart1: serial@12100 { + compatible = "snps,dw-apb-uart"; + reg = <0x11000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "snps,dw-apb-uart"; + reg = <0x12200 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "snps,dw-apb-uart"; + reg = <0x12300 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + mdio: mdio@22004 { #address-cells = <1>; #size-cells = <0>; @@ -117,8 +147,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c0_pins>; pinctrl-1 = <&i2c0_gpio>; - scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -136,8 +166,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c1_pins>; pinctrl-1 = <&i2c1_gpio>; - scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts new file mode 100644 index 000000000000..57fc698e55d0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "armada-3720-uDPU.dtsi" + +/ { + model = "Methode eDPU Board"; + compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710"; +}; + +ð0 { + phy-mode = "2500base-x"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index 070725b81be5..1b2ed63ae6a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -12,8 +12,8 @@ / { model = "Globalscale Marvell ESPRESSOBin Ultra Board"; - compatible = "globalscale,espressobin-ultra", "marvell,armada3720", - "marvell,armada3710"; + compatible = "globalscale,espressobin-ultra", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; aliases { /* ethernet1 is WAN port */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index b20c8e7d923b..c76eceabd33e 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -1,66 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device tree for the uDPU board. - * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) - * Copyright (C) 2016 Marvell - * Copyright (C) 2019 Methode Electronics - * Copyright (C) 2019 Telus - * - * Vladimir Vid <vladimir.vid@sartura.hr> - */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" +#include "armada-3720-uDPU.dtsi" / { model = "Methode uDPU Board"; - compatible = "methode,udpu", "marvell,armada3720"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - - power1 { - label = "udpu:green:power"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - power2 { - label = "udpu:red:power"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - network1 { - label = "udpu:green:network"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - - network2 { - label = "udpu:red:network"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - alarm1 { - label = "udpu:green:alarm"; - gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; - }; - - alarm2 { - label = "udpu:red:alarm"; - gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; - }; - }; + compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; @@ -71,55 +17,6 @@ tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; - - sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; - non-removable; - no-sd; - no-sdio; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x180000>; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x10000>; - }; - }; - }; }; &pinctrl_nb { @@ -127,11 +24,6 @@ groups = "i2c1"; function = "gpio"; }; - - i2c2_recovery_pins: i2c2-recovery-pins { - groups = "i2c2"; - function = "gpio"; - }; }; &i2c0 { @@ -144,50 +36,7 @@ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; -&i2c1 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - nct375@48 { - status = "okay"; - compatible = "ti,tmp75c"; - reg = <0x48>; - }; - - nct375@49 { - status = "okay"; - compatible = "ti,tmp75c"; - reg = <0x49>; - }; -}; - ð0 { phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; sfp = <&sfp_eth0>; }; - -ð1 { - phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; - sfp = <&sfp_eth1>; -}; - -&usb3 { - status = "okay"; - phys = <&usb2_utmi_otg_phy>; - phy-names = "usb2-utmi-otg-phy"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi new file mode 100644 index 000000000000..3f79923376fb --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid <vladimir.vid@sartura.hr> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + led-power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led-network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + led-network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + led-alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + led-alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + +&pinctrl_nb { + i2c2_recovery_pins: i2c2-recovery-pins { + groups = "i2c2"; + function = "gpio"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + temp-sensor@48 { + compatible = "ti,tmp75c"; + reg = <0x48>; + }; + + temp-sensor@49 { + compatible = "ti,tmp75c"; + reg = <0x49>; + }; +}; + +ð0 { + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; +}; + +&uart0 { + status = "okay"; +}; |