diff options
author | Arnd Bergmann <arnd@arndb.de> | 2022-09-23 17:36:42 +0300 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2022-09-23 17:36:43 +0300 |
commit | 6972b275fedc1996cad03e8926f7f3ea03443e6b (patch) | |
tree | 1a0950371c94e8ae5f17ac8ae3dcfe3123049c26 /arch/arm64 | |
parent | 78559d6fb859970dfb6adae0c572d6bf29cac40e (diff) | |
parent | 3d59187efc982bf20309ae2fb8514007f9bf2b4e (diff) | |
download | linux-6972b275fedc1996cad03e8926f7f3ea03443e6b.tar.xz |
Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64')
95 files changed, 3645 insertions, 985 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1d86a33de528..d7669a7cee9f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb @@ -101,8 +104,11 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb @@ -152,3 +158,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index c1cb1ba5173c..5cdc7ac1a9c0 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> /* * GPIO name legend: proper name = the GPIO line is used as GPIO @@ -502,20 +503,20 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; @@ -1064,7 +1065,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -1079,7 +1080,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 567b33106556..92f264891d84 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -368,7 +368,7 @@ bus-width = <4>; - cd-gpios = <&tlmm 38 0x1>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index aaad7d9059f6..a7c7ca980a71 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -129,12 +129,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - pmuv8: pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | @@ -252,13 +246,14 @@ #reset-cells = <1>; }; - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; - reg = <0x0 0x01905000 0x0 0x8000>; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0x0 0x01905000 0x0 0x1000>; + #hwlock-cells = <1>; }; tcsr: syscon@1937000 { - compatible = "syscon"; + compatible = "qcom,tcsr-ipq6018", "syscon"; reg = <0x0 0x01937000 0x0 0x21000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 81dc3a0bcd7d..7143c936de61 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -51,12 +51,12 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index 40415d988e4a..db4b87944cdf 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -39,12 +39,12 @@ &pcie0 { status = "ok"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie1 { status = "ok"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index d53675fc1595..a47acf9bdf24 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -199,7 +199,7 @@ pcie_qmp0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x00086000 0x1000>; + reg = <0x00086000 0x1c4>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -227,7 +227,7 @@ pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x0008e000 0x1000>; + reg = <0x0008e000 0x1c4>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -383,7 +383,7 @@ sdhc_1: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 10f6509a8709..3255bd3fcb55 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -61,9 +61,9 @@ }; }; - reg_vdd_tsp: regulator-vdd-tsp { + reg_vdd_tsp_a: regulator-vdd-tsp-a { compatible = "regulator-fixed"; - regulator-name = "vdd_tsp"; + regulator-name = "vdd_tsp_a"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index bc198a2eea25..6db5f78ca286 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -73,8 +73,8 @@ touchscreen-size-x = <540>; touchscreen-size-y = <960>; - vdd-supply = <®_vdd_tsp>; - vddo-supply = <&pm8916_l6>; + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8916_l6>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_default>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 7f2ab1891d91..5fb8ecd0c9ca 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -42,7 +42,7 @@ touchscreen-size-x = <720>; touchscreen-size-y = <1280>; - avdd-supply = <®_vdd_tsp>; + avdd-supply = <®_vdd_tsp_a>; vdd-supply = <&pm8916_l6>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi new file mode 100644 index 000000000000..542010fdfb8a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + haptic { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; + + i2c-muic { + /* SM5504 MUIC instead of SM5502 */ + /delete-node/ extcon@25; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_en_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; +}; + +&blsp_i2c2 { + /* lis2hh12 accelerometer instead of BMC150 */ + status = "disabled"; + + /delete-node/ accelerometer@10; + /delete-node/ magnetometer@12; +}; + +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_touch_key>; +}; + +&msmgpio { + motor_en_default: motor-en-default { + pins = "gpio76"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts new file mode 100644 index 000000000000..777eb934eb4b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts + */ + +/ { + model = "Samsung Galaxy E5"; + compatible = "samsung,e5", "qcom,msm8916"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts new file mode 100644 index 000000000000..b412b61ca258 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts + */ + +/ { + model = "Samsung Galaxy E7"; + compatible = "samsung,e7", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&pm8916_l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts new file mode 100644 index 000000000000..bc7134698978 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" +#include <dt-bindings/leds/common.h> + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts + */ + +/ { + model = "Samsung Galaxy Grand Max"; + compatible = "samsung,grandmax", "qcom,msm8916"; + chassis-type = "handset"; + + /delete-node/ gpio-hall-sensor; + /delete-node/ i2c-nfc; + /delete-node/ i2c-tkey; + + gpio-leds { + compatible = "gpio-leds"; + keyled { + gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + }; + }; +}; + +®_motor_vdd { + gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; +}; + +®_touch_key { + status = "disabled"; +}; + +&msmgpio { + gpio_leds_default: gpio-led-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&motor_en_default { + pins = "gpio72"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 439e89cf7878..bbd6bb3f4fd7 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -210,6 +210,15 @@ pinctrl-names = "default"; pinctrl-0 = <&imu_irq_default>; }; + + magnetometer@2e { + compatible = "yamaha,yas537"; + reg = <0x2e>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + }; }; &blsp_i2c4 { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 48bc2e09128d..a831064700ee 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -936,6 +936,20 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x01800000 0x80000>; + clocks = <&xo_board>, + <&sleep_clk>, + <&dsi_phy0 1>, + <&dsi_phy0 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; }; tcsr_mutex: hwlock@1905000 { @@ -1469,7 +1483,7 @@ sdhc_1: mmc@7824000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -1487,7 +1501,7 @@ sdhc_2: mmc@7864000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 8416a45ca4fd..6b992a6d56c1 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -722,7 +722,7 @@ }; tcsr_phy_clk_scheme_sel: syscon@193f044 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8953", "syscon"; reg = <0x193f044 0x4>; }; @@ -799,7 +799,7 @@ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -859,7 +859,7 @@ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7864900 0x500>, <0x7864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index cbe11c060df9..c4e87d0aec42 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -17,7 +17,7 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <251 0 252 0>; + qcom,msm-id = <251 0>, <252 0>; qcom,pmic-id = <65545 65546 0 0>; qcom,board-id = <12 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 61ec905025b0..f9d8bd09e074 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -499,7 +499,7 @@ linux,code = <KEY_POWER>; }; - volwnkey { + resin { compatible = "qcom,pm8941-resin"; interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index f430d797196f..ff60b7004d26 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -471,7 +471,7 @@ &sdhc2 { status = "okay"; - cd-gpios = <&tlmm 100 0>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; vmmc-supply = <&pm8994_l21>; vqmmc-supply = <&pm8994_l13>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 8bc6c070e306..ded5b7ceeaf9 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8994.h> #include <dt-bindings/clock/qcom,mmcc-msm8994.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> / { @@ -164,12 +165,6 @@ reg = <0 0x80000000 0 0>; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; @@ -464,7 +459,7 @@ sdhc1: mmc@f9824900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -487,7 +482,7 @@ sdhc2: mmc@f98a4900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; @@ -502,7 +497,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - cd-gpios = <&tlmm 100 0>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "disabled"; }; @@ -762,9 +757,10 @@ #interrupt-cells = <4>; }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; }; tlmm: pinctrl@fd510000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index e165b5e890a0..ca7c8d2e1d3d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -196,8 +196,8 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&pm8994_l28>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 627649979891..77819186086a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -58,6 +58,14 @@ }; }; + irled { + compatible = "pwm-ir-tx"; + pwms = <&pm8994_lpg 1 1000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&irled_default>; + }; + reserved-memory { memory@88800000 { reg = <0x0 0x88800000 0x0 0x1400000>; @@ -297,6 +305,41 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8994_lpg { + status = "okay"; + + qcom,power-source = <1>; +}; + +&pmi8994_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &slpi_pil { status = "okay"; @@ -608,6 +651,15 @@ }; &pm8994_gpios { + irled_default: irled-default-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; + wlan_en_default: wlan-en-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 25f30ec277c1..4e5264f4116a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -8,6 +8,7 @@ #include "msm8996-xiaomi-common.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> #include <dt-bindings/input/ti-drv260x.h> / { @@ -193,7 +194,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -208,7 +209,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index 30a9e4bed4af..79be5fb1295b 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -9,6 +9,7 @@ #include "pmi8996.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> / { model = "Xiaomi Mi Note 2"; @@ -116,6 +117,25 @@ "qcom/msm8996/scorpio/modem.mbn"; }; +&pm8994_lpg { + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <1>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <0>; + }; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -171,7 +191,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -186,7 +206,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; @@ -258,6 +278,15 @@ "PMIC_SLB", /* GPIO_20 */ "UIM_BATT_ALARM", /* GPIO_21 */ "NC"; /* GPIO_22 */ + + keypad_default: keypad-default-state { + pins = "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; }; &pm8994_mpps { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 742eac4ce9b3..c0a2baffa49d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/interconnect/qcom,msm8996.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> @@ -359,16 +360,10 @@ firmware { scm { compatible = "qcom,scm-msm8996", "qcom,scm"; - qcom,dload-mode = <&tcsr 0x13000>; + qcom,dload-mode = <&tcsr_2 0x13000>; }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -838,12 +833,18 @@ <&rpmcc RPM_SMD_PCNOC_A_CLK>; }; - tcsr_mutex_regs: syscon@740000 { - compatible = "syscon"; - reg = <0x00740000 0x40000>; + tcsr_mutex: hwlock@740000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00740000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_1: syscon@760000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x00760000 0x20000>; }; - tcsr: syscon@7a0000 { + tcsr_2: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x007a0000 0x18000>; }; @@ -1161,9 +1162,13 @@ "hdmi_phy"; clocks = <&mmcc MDSS_AHB_CLK>, - <&gcc GCC_HDMI_CLKREF_CLK>; + <&gcc GCC_HDMI_CLKREF_CLK>, + <&xo_board>; clock-names = "iface", - "ref"; + "ref", + "xo"; + + #clock-cells = <0>; status = "disabled"; }; @@ -2413,7 +2418,7 @@ qcom,smem-states = <&mpss_smp2p_out 0>; qcom,smem-state-names = "stop"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; status = "disabled"; @@ -3018,7 +3023,7 @@ sdhc1: mmc@7464900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; @@ -3042,7 +3047,7 @@ sdhc2: mmc@74a4900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; @@ -3337,7 +3342,7 @@ interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; slim-ifc-dev = <&tasha_ifd>; @@ -3499,7 +3504,7 @@ }; saw3: syscon@9a10000 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x09a10000 0x1000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 02d21bff2198..f05f16ac5cc1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -308,12 +308,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1047,9 +1041,15 @@ }; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x01f40000 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,msm8998-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; }; tlmm: pinctrl@3400000 { @@ -1340,7 +1340,7 @@ resets = <&gcc GCC_MSS_RESTART>; reset-names = "mss_restart"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; power-domains = <&rpmpd MSM8998_VDDCX>, <&rpmpd MSM8998_VDDMX>; @@ -2076,9 +2076,9 @@ }; sdhc2: mmc@c0a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4"; reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 7aa2ef90cb6a..f02c223ef448 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -20,10 +20,29 @@ #size-cells = <0>; #io-channel-cells = <1>; + adc-chan@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + adc-chan@6 { reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; label = "die_temp"; }; + + adc-chan@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; }; pm6150l_adc_tm: adc-tm@3500 { diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index d0eefbb51663..e1622b16c08b 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -187,7 +187,7 @@ #address-cells = <1>; #size-cells = <0>; - pm660_spmi_regulators: pm660-regulators { + pm660_spmi_regulators: regulators { compatible = "qcom,pm660-regulators"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index c7945470ffee..8aa0a5078772 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -65,7 +65,7 @@ #address-cells = <1>; #size-cells = <0>; - pm660l_lpg: lpg@b100 { + pm660l_lpg: pwm { compatible = "qcom,pm660l-lpg"; status = "disabled"; @@ -81,7 +81,7 @@ status = "disabled"; }; - pm660l_spmi_regulators: pm660l-regulators { + pm660l_spmi_regulators: regulators { compatible = "qcom,pm660l-regulators"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi new file mode 100644 index 000000000000..61f7a6345150 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm7250b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm7250b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7250b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm7250b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm7250b_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + adc-chan@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + adc-chan@2 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + adc-chan@7 { + reg = <ADC5_USB_IN_I>; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + adc-chan@8 { + reg = <ADC5_USB_IN_V_16>; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + adc-chan@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + adc-chan@e { + reg = <ADC5_AMUX_THM2>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1390_therm"; + }; + + adc-chan@1e { + reg = <ADC5_MID_CHG_DIV6>; + qcom,pre-scaling = <1 6>; + label = "chg_mid"; + }; + + adc-chan@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + adc-chan@84 { + reg = <ADC5_VBAT_SNS>; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + + adc-chan@99 { + reg = <ADC5_SBUx>; + qcom,pre-scaling = <1 3>; + label = "chg_sbux"; + }; + }; + + pm7250b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + pmic@3 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index fd8434215924..574fa95a2871 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <0>; - pon: power-on@800 { + pon: pon@800 { compatible = "qcom,pm8998-pon"; reg = <0x0800>; mode-bootloader = <0x2>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 5d1ec3a6cc3c..cdded791d96e 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; @@ -128,7 +128,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8150b_lpg: lpg { + pm8150b_lpg: pwm { compatible = "qcom,pm8150b-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index c62d023b39a2..135bfb8d629b 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8150l_lpg: lpg { + pm8150l_lpg: pwm { compatible = "qcom,pm8150l-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index e0bbb67717fe..f28e71487d5c 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -30,9 +30,8 @@ #interrupt-cells = <2>; }; - pm8350c_pwm: pwm@e800 { + pm8350c_pwm: pwm { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #pwm-cells = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index 741c538a9cee..a1d36f9ebbd2 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -45,7 +45,7 @@ #thermal-sensor-cells = <0>; }; - pm8953_vadc: vadc@3100 { + pm8953_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x00 0x31 0x00 0x01>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index ab342397fcd8..e92e5ac414d3 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -135,7 +135,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8994_lpg: lpg { + pm8994_lpg: pwm { compatible = "qcom,pm8994-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 84c44912ec93..542c215dde10 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -21,7 +21,7 @@ }; pmi8994_mpps: mpps@a000 { - compatible = "qcom,pmi8994-mpp"; + compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; gpio-ranges = <&pmi8994_mpps 0 0 4>; @@ -37,7 +37,7 @@ #address-cells = <1>; #size-cells = <0>; - pmi8994_lpg: lpg { + pmi8994_lpg: pwm { compatible = "qcom,pmi8994-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 6d3d212560c1..3852a012bb0f 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -42,7 +42,7 @@ }; }; - pmi8998_lpg: lpg { + pmi8998_lpg: pwm { compatible = "qcom,pmi8998-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 0f94c46a1444..a7ec9d11946d 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -39,16 +39,13 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "eoc-int-en-set"; #io-channel-cells = <1>; - io-channel-ranges; }; pmk8350_adc_tm: adc-tm@3400 { compatible = "qcom,adc-tm7"; reg = <0x3400>; interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "threshold"; #address-cells = <1>; #size-cells = <0>; #thermal-sensor-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index 68e9122363ae..20c5d60c8c2c 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - pon: power-on@800 { + pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; pwrkey { diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi index c307fc662511..1da4606e8ee6 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -45,7 +45,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 1721ebe5759b..1678ef0f8684 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -99,7 +99,7 @@ &pcie { status = "okay"; - perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&perst_state>; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 9ab990061522..80f2d05595fa 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -295,12 +295,6 @@ hwlocks = <&tcsr_mutex 3>; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - soc: soc@0 { #address-cells = <1>; #size-cells = <1>; @@ -726,13 +720,14 @@ assigned-clock-rates = <19200000>; }; - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; }; tcsr: syscon@1937000 { - compatible = "syscon"; + compatible = "qcom,qcs404-tcsr", "syscon"; reg = <0x01937000 0x25000>; }; @@ -1297,7 +1292,7 @@ }; pcie: pci@10000000 { - compatible = "qcom,pcie-qcs404", "snps,dw-pcie"; + compatible = "qcom,pcie-qcs404"; reg = <0x10000000 0xf1d>, <0x10000f20 0xa8>, <0x07780000 0x2000>, diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index ba547ca9fc6b..87ab0e1ecd16 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -333,9 +333,6 @@ snps,reset-active-low; snps,reset-delays-us = <0 11000 70000>; - snps,ptp-ref-clk-rate = <250000000>; - snps,ptp-req-clk-rate = <96000000>; - snps,mtl-rx-config = <&mtl_rx_setup>; snps,mtl-tx-config = <&mtl_tx_setup>; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 9398f0349944..b608b82dff03 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -35,7 +35,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l5a: ldo5 { @@ -43,7 +42,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7a: ldo7 { @@ -51,7 +49,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l13a: ldo13 { @@ -59,7 +56,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; @@ -72,7 +68,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l2c: ldo2 { @@ -80,7 +75,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l3c: ldo3 { @@ -96,7 +90,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6c: ldo6 { @@ -112,7 +105,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l10c: ldo10 { @@ -141,7 +133,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7g: ldo7 { @@ -149,7 +140,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l8g: ldo8 { @@ -157,7 +147,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; }; @@ -194,9 +183,10 @@ #size-cells = <0>; pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450a_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -210,9 +200,10 @@ #size-cells = <0>; pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450c_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -226,9 +217,10 @@ #size-cells = <0>; pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450e_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -242,9 +234,10 @@ #size-cells = <0>; pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450g_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 8290d036044a..edfcd47e1a00 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -24,8 +24,6 @@ }; &pm6150_adc { - status = "disabled"; - /delete-node/ skin-temp-thermistor@4e; /delete-node/ charger-thermistor@4f; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index bfbf26fd2cd4..d49de65aa960 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -16,17 +16,6 @@ compatible = "google,lazor-rev0", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sn65dsi86_out { /* * Lane 0 was incorrectly mapped on the cable, but we've now decided @@ -35,3 +24,11 @@ */ lane-polarities = <1 0>; }; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index d45a59afd7fc..80c7108bc51b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -16,13 +16,11 @@ compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; }; -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 2cf7d5212c61..002663d752da 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -55,8 +55,6 @@ ap_ts_pen_1v8: &i2c4 { }; &pm6150_adc { - status = "disabled"; - /delete-node/ charger-thermistor@4f; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts index 764c451c1a85..767cb7450c0d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -14,7 +14,7 @@ / { model = "Google Pazquel (Parade,LTE)"; - compatible = "google,pazquel-sku4", "qcom,sc7180"; + compatible = "google,pazquel-sku6", "google,pazquel-sku4", "qcom,sc7180"; }; &ap_sar_sensor_i2c { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index 76a130bad60a..8467ff41e6d5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -34,13 +34,10 @@ /delete-node/ charger-thermistor@0; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; }; -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 59a23d0e9651..bc097d1b1b23 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -44,17 +44,6 @@ ap_ts_pen_1v8: &i2c4 { compatible = "auo,b116xa01"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sdhc_2 { status = "okay"; }; @@ -63,6 +52,14 @@ ap_ts_pen_1v8: &i2c4 { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index b5f534db135a..eae22e6e97c1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -299,7 +299,7 @@ pinctrl-names = "default"; pinctrl-0 = <&en_pp3300_hub>; - regulator-always-on; + /* The BIOS leaves this regulator on */ regulator-boot-on; vin-supply = <&pp3300_a>; @@ -936,6 +936,24 @@ ap_spi_fp: &spi10 { &usb_1_dwc3 { dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index b82c335c25af..58976a1ba06b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -555,12 +555,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; @@ -1462,13 +1456,19 @@ status = "disabled"; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sc7180-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; }; - tcsr_regs: syscon@1fc0000 { - compatible = "syscon"; + tcsr_regs_2: syscon@1fc0000 { + compatible = "qcom,sc7180-tcsr", "syscon"; reg = <0 0x01fc0000 0 0x40000>; }; @@ -1932,8 +1932,8 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - qcom,spare-regs = <&tcsr_regs 0xb3e4>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index cfe2741456a1..25f31c81b2b7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -83,17 +83,6 @@ }; }; -/* Modem setup is different on Chrome setups than typical Qualcomm setup */ -&remoteproc_mpss { - status = "okay"; - compatible = "qcom,sc7280-mss-pil"; - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; - memory-region = <&mba_mem>, <&mpss_mem>; - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; -}; - &remoteproc_wpss { status = "okay"; firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index 344338ad8a01..dddb505e220b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -87,6 +87,36 @@ ap_ts_pen_1v8: &i2c13 { pins = "gpio51"; }; +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; + +&wcd9385 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + &tlmm { tp_int_odl: tp-int-odl { pins = "gpio7"; @@ -105,4 +135,11 @@ ap_ts_pen_1v8: &i2c13 { function = "gpio"; bias-disable; }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index 859faaa8b7e0..c72e53aaf997 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -5,6 +5,161 @@ * Copyright (c) 2022, The Linux Foundation. All rights reserved. */ +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; + + dai-link@6 { + reg = <LPASS_CDC_DMA_RX0>; + }; + + dai-link@19 { + reg = <LPASS_CDC_DMA_TX3>; + }; + + dai-link@25 { + reg = <LPASS_CDC_DMA_VA_TX0>; + }; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; +}; + +&swr0 { + status = "okay"; +}; + +&swr1 { + status = "okay"; +}; + +&wcd9385 { + status = "okay"; +}; + /* PINCTRL */ &lpass_dmic01_clk { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 7881bbc641a0..f0f26af1e421 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -9,10 +9,11 @@ #include "sc7280-herobrine.dtsi" #include "sc7280-herobrine-audio-wcd9385.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; - compatible = "google,hoglin", "qcom,sc7280"; + compatible = "google,zoglin", "google,hoglin", "qcom,sc7280"; /* FIXED REGULATORS */ @@ -167,7 +168,7 @@ ap_ts_pen_1v8: &i2c13 { "PMIC_EDP_BL_PWM", ""; - edp_bl_reg_en: edp-bl-reg-en { + edp_bl_reg_en: edp-bl-reg-en-state { pins = "gpio6"; function = "normal"; bias-disable; @@ -371,7 +372,5 @@ ap_ts_pen_1v8: &i2c13 { "", /* 170 */ "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", - "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts new file mode 100644 index 000000000000..ccbe50b6249a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Evoker"; + compatible = "google,evoker", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index c1647a85a371..c1a671968725 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Google Herobrine (rev1+)"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi new file mode 100644 index 000000000000..a92eeccd2b2a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine dts fragment for LTE SKUs + * + * Copyright 2022 Google LLC. + */ +/* Modem setup is different on Chrome setups than typical Qualcomm setup */ + +&remoteproc_mpss { + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + memory-region = <&mba_mem>, <&mpss_mem>; + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts index 2cacafd8faa8..73e24cc55a09 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -7,327 +7,10 @@ /dts-v1/; -#include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { - model = "Google Villager (rev0+)"; - compatible = "google,villager", "qcom,sc7280"; -}; - -/* - * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES - * - * Sort order matches the order in the parent files (parents before children). - */ - -&pp3300_codec { - status = "okay"; -}; - -/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ - -ap_tp_i2c: &i2c0 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - - hid-descr-addr = <0x20>; - vcc-supply = <&pp3300_z1>; - - wakeup-source; - }; -}; - -ts_i2c: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; - - interrupt-parent = <&tlmm>; - interrupts = <55 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - - vcc33-supply = <&ts_avdd>; - }; -}; - -&ap_sar_sensor_i2c { - status = "okay"; -}; - -&ap_sar_sensor0 { - status = "okay"; -}; - -&ap_sar_sensor1 { - status = "okay"; -}; - -&mdss_edp { - status = "okay"; -}; - -&mdss_edp_phy { - status = "okay"; -}; - -/* For nvme */ -&pcie1 { - status = "okay"; -}; - -/* For nvme */ -&pcie1_phy { - status = "okay"; -}; - -&pwmleds { - status = "okay"; -}; - -/* For eMMC */ -&sdhc_1 { - status = "okay"; -}; - -/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ - -&ts_rst_conn { - bias-disable; -}; - -/* PINCTRL - BOARD-SPECIFIC */ - -/* - * Methodology for gpio-line-names: - * - If a pin goes to herobrine board and is named it gets that name. - * - If a pin goes to herobrine board and is not named, it gets no name. - * - If a pin is totally internal to Qcard then it gets Qcard name. - * - If a pin is not hooked up on Qcard, it gets no name. - */ - -&pm8350c_gpios { - gpio-line-names = "FLASH_STROBE_1", /* 1 */ - "AP_SUSPEND", - "PM8008_1_RST_N", - "", - "", - "", - "PMIC_EDP_BL_EN", - "PMIC_EDP_BL_PWM", - ""; -}; - -&tlmm { - gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ - "AP_TP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_SAR_SDA", - "AP_SAR_SCL", - "PRB_SC_GPIO_6", - "TP_INT_ODL", - "HP_I2C_SDA", - "HP_I2C_SCL", - - "GNSS_L1_EN", /* 10 */ - "GNSS_L5_EN", - "SPI_AP_MOSI", - "SPI_AP_MISO", - "SPI_AP_CLK", - "SPI_AP_CS0_L", - /* - * AP_FLASH_WP is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_OD. - */ - "AP_FLASH_WP", - "", - "AP_EC_INT_L", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "", - "PM8008_IRQ_1", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "MOS_BT_UART_CTS", - "MOS_BT_UART_RFR", - - "MOS_BT_UART_TX", /* 30 */ - "MOS_BT_UART_RX", - "PRB_SC_GPIO_32", - "HUB_RST_L", - "", - "", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - - "AP_EC_SPI_MISO", /* 40 */ - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "LCM_RST_L", - "EARLY_EUD_N", - "", - "DP_HOT_PLUG_DET", - "IO_BRD_MLB_ID0", - "IO_BRD_MLB_ID1", - - "IO_BRD_MLB_ID2", /* 50 */ - "SSD_EN", - "TS_I2C_SDA_CONN", - "TS_I2C_CLK_CONN", - "TS_RST_CONN", - "TS_INT_CONN", - "AP_I2C_TPM_SDA", - "AP_I2C_TPM_SCL", - "PRB_SC_GPIO_58", - "PRB_SC_GPIO_59", - - "EDP_HOT_PLUG_DET_N", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "AMP_EN", - "CAM0_MCLK_GPIO_64", - "CAM1_MCLK_GPIO_65", - "WF_CAM_MCLK", - "PRB_SC_GPIO_67", - "FPMCU_BOOT0", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "", - "", - "WF_CAM_SDA", - "WF_CAM_SCL", - "", - "", - "EN_FP_RAILS", - "FP_RST_L", - "PCIE1_CLKREQ_ODL", - - "EN_PP3300_DX_EDP", /* 80 */ - "SC_GPIO_81", - "FORCED_USB_BOOT", - "WCD_RESET_N", - "MOS_WLAN_EN", - "MOS_BT_EN", - "MOS_SW_CTRL", - "MOS_PCIE0_RST", - "MOS_PCIE0_CLKREQ_N", - "MOS_PCIE0_WAKE_N", - - "MOS_LAA_AS_EN", /* 90 */ - "SD_CD_ODL", - "", - "", - "MOS_BT_WLAN_SLIMBUS_CLK", - "MOS_BT_WLAN_SLIMBUS_DAT0", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "", - "", - "GSC_AP_INT_ODL", - "EN_PP3300_CODEC", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM1_DATA_GPIO_109", - - "UIM1_CLK_GPIO_110", /* 110 */ - "UIM1_RESET_GPIO_111", - "PRB_SC_GPIO_112", - "UIM0_DATA", - "UIM0_CLK", - "UIM0_RST", - "UIM0_PRESENT_ODL", - "SDM_RFFE0_CLK", - "SDM_RFFE0_DATA", - "WF_CAM_EN", - - "FASTBOOT_SEL_0", /* 120 */ - "SC_GPIO_121", - "FASTBOOT_SEL_1", - "SC_GPIO_123", - "FASTBOOT_SEL_2", - "SM_RFFE4_CLK_GRFC_8", - "SM_RFFE4_DATA_GRFC_9", - "WLAN_COEX_UART1_RX", - "WLAN_COEX_UART1_TX", - "PRB_SC_GPIO_129", - - "LCM_ID0", /* 130 */ - "LCM_ID1", - "", - "SDR_QLINK_REQ", - "SDR_QLINK_EN", - "QLINK0_WMSS_RESET_N", - "SMR526_QLINK1_REQ", - "SMR526_QLINK1_EN", - "SMR526_QLINK1_WMSS_RESET_N", - "PRB_SC_GPIO_139", - - "SAR1_IRQ_ODL", /* 140 */ - "SAR0_IRQ_ODL", - "PRB_SC_GPIO_142", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA0", - "WCD_SWR_TX_DATA1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA0", - "WCD_SWR_RX_DATA1", - - "DMIC01_CLK", /* 150 */ - "DMIC01_DATA", - "DMIC23_CLK", - "DMIC23_DATA", - "", - "", - "EC_IN_RW_ODL", - "HUB_EN", - "WCD_SWR_TX_DATA2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "MOS_BLE_UART_TX", - "MOS_BLE_UART_RX", - "", - "", - ""; + model = "Google Villager (rev0)"; + compatible = "google,villager-rev0", "qcom,sc7280"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts new file mode 100644 index 000000000000..f1017809e5da --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine-villager-r1.dts" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Villager (rev1+) with LTE"; + compatible = "google,villager-sku512", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts new file mode 100644 index 000000000000..cfc648726930 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" + +/ { + model = "Google Villager (rev1+)"; + compatible = "google,villager", "qcom,sc7280"; +}; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi new file mode 100644 index 000000000000..4566722bf4dd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 3f8996c00b05..c11e37160f34 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -144,8 +144,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* The BIOS leaves this regulator on */ regulator-boot-on; - regulator-always-on; gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -296,6 +296,14 @@ /* BOARD-SPECIFIC TOP LEVEL NODES */ + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + pwmleds: pwmleds { compatible = "pwm-leds"; status = "disabled"; @@ -446,7 +454,7 @@ ap_i2c_tpm: &i2c14 { pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&pp3300_ssd>; }; @@ -596,25 +604,32 @@ ap_ec_spi: &spi10 { &usb_1_dwc3 { dr_mode = "host"; -}; -&usb_1_hsphy { - status = "okay"; -}; + #address-cells = <1>; + #size-cells = <0>; -&usb_1_qmpphy { - status = "okay"; -}; + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; -&usb_2 { - status = "okay"; + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; }; -&usb_2_dwc3 { - dr_mode = "host"; +&usb_1_hsphy { + status = "okay"; }; -&usb_2_hsphy { +&usb_1_qmpphy { status = "okay"; }; @@ -729,27 +744,27 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&bios_flash_wp_od>; - amp_en: amp-en { + amp_en: amp-en-pins { pins = "gpio63"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ap_ec_int_l: ap-ec-int-l { + ap_ec_int_l: ap-ec-int-l-pins { pins = "gpio18"; function = "gpio"; bias-pull-up; }; - bios_flash_wp_od: bios-flash-wp-od { + bios_flash_wp_od: bios-flash-wp-od-pins { pins = "gpio16"; function = "gpio"; /* Has external pull */ bias-disable; }; - en_fp_rails: en-fp-rails { + en_fp_rails: en-fp-rails-pins { pins = "gpio77"; function = "gpio"; bias-disable; @@ -757,60 +772,60 @@ ap_ec_spi: &spi10 { output-high; }; - en_pp3300_codec: en-pp3300-codec { + en_pp3300_codec: en-pp3300-codec-pins { pins = "gpio105"; function = "gpio"; bias-disable; drive-strength = <2>; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { + en_pp3300_dx_edp: en-pp3300-dx-edp-pins { pins = "gpio80"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_rst_l: fp-rst-l { + fp_rst_l: fp-rst-l-pins { pins = "gpio78"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_to_ap_irq_l: fp-to-ap-irq-l { + fp_to_ap_irq_l: fp-to-ap-irq-l-pins { pins = "gpio61"; function = "gpio"; /* Has external pullup */ bias-disable; }; - fpmcu_boot0: fpmcu-boot0 { + fpmcu_boot0: fpmcu-boot0-pins { pins = "gpio68"; function = "gpio"; bias-disable; }; - gsc_ap_int_odl: gsc-ap-int-odl { + gsc_ap_int_odl: gsc-ap-int-odl-pins { pins = "gpio104"; function = "gpio"; bias-pull-up; }; - hp_irq: hp-irq { + hp_irq: hp-irq-pins { pins = "gpio101"; function = "gpio"; bias-pull-up; }; - hub_en: hub-en { + hub_en: hub-en-pins { pins = "gpio157"; function = "gpio"; bias-disable; drive-strength = <2>; }; - pe_wake_odl: pe-wake-odl { + pe_wake_odl: pe-wake-odl-pins { pins = "gpio3"; function = "gpio"; /* Has external pull */ @@ -819,45 +834,45 @@ ap_ec_spi: &spi10 { }; /* For ap_spi_fp */ - qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high { + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins { pins = "gpio39"; function = "gpio"; output-high; }; /* For ap_ec_spi */ - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { pins = "gpio43"; function = "gpio"; output-high; }; - sar0_irq_odl: sar0-irq-odl { + sar0_irq_odl: sar0-irq-odl-pins { pins = "gpio141"; function = "gpio"; bias-pull-up; }; - sar1_irq_odl: sar1-irq-odl { + sar1_irq_odl: sar1-irq-odl-pins { pins = "gpio140"; function = "gpio"; bias-pull-up; }; - sd_cd_odl: sd-cd-odl { + sd_cd_odl: sd-cd-odl-pins { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - ssd_en: ssd-en { + ssd_en: ssd-en-pins { pins = "gpio51"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ssd_rst_l: ssd-rst-l { + ssd_rst_l: ssd-rst-l-pins { pins = "gpio2"; function = "gpio"; bias-disable; @@ -865,14 +880,14 @@ ap_ec_spi: &spi10 { output-low; }; - tp_int_odl: tp-int-odl { + tp_int_odl: tp-int-odl-pins { pins = "gpio7"; function = "gpio"; /* Has external pullup */ bias-disable; }; - wf_cam_en: wf-cam-en { + wf_cam_en: wf-cam-en-pins { pins = "gpio119"; function = "gpio"; /* Has external pulldown */ diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index a7c346aa3b02..7f5143e9bb80 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -79,26 +79,26 @@ ap_h1_spi: &spi14 { }; &tlmm { - ap_ec_int_l: ap-ec-int-l { + ap_ec_int_l: ap-ec-int-l-pins { pins = "gpio18"; function = "gpio"; input-enable; bias-pull-up; }; - h1_ap_int_odl: h1-ap-int-odl { + h1_ap_int_odl: h1-ap-int-odl-pins { pins = "gpio104"; function = "gpio"; input-enable; bias-pull-up; }; - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { pins = "gpio43"; output-high; }; - qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high { + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins { pins = "gpio59"; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 6d3ff80582ae..7559164cdda0 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -10,6 +10,7 @@ #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include "sc7280-idp.dtsi" #include "pmr735a.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform"; @@ -78,7 +79,7 @@ }; &pmk8350_vadc { - pmr735a_die_temp { + pmr735a-die-temp@403 { reg = <PMR735A_ADC7_DIE_TEMP>; label = "pmr735a_die_temp"; qcom,pre-scaling = <1 1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index a74e0b730db6..cd432a2856a7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -20,6 +20,42 @@ serial1 = &uart7; }; + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>; + pinctrl-1 = <&wcd_reset_n_sleep>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + }; + gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -49,6 +85,104 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_pwren>; }; + + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; }; &apps_rsc { @@ -246,9 +380,50 @@ modem-init; }; +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; + + dai-link@6 { + reg = <LPASS_CDC_DMA_RX0>; + }; + + dai-link@19 { + reg = <LPASS_CDC_DMA_TX3>; + }; + + dai-link@25 { + reg = <LPASS_CDC_DMA_VA_TX0>; + }; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; + vdd-micb-supply = <&vreg_bob>; +}; + &pcie1 { status = "okay"; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&nvme_3v3_regulator>; @@ -264,7 +439,7 @@ }; &pmk8350_vadc { - pmk8350_die_temp { + pmk8350-die-temp@3 { reg = <PMK8350_ADC7_DIE_TEMP>; label = "pmk8350_die_temp"; qcom,pre-scaling = <1 1>; @@ -306,6 +481,28 @@ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + &uart5 { compatible = "qcom,geni-debug-uart"; status = "okay"; @@ -550,18 +747,24 @@ }; &tlmm { - bt_en: bt-en { + amp_en: amp-en { + pins = "gpio63"; + bias-pull-down; + drive-strength = <2>; + }; + + bt_en: bt-en-pins { pins = "gpio85"; function = "gpio"; output-low; bias-disable; }; - nvme_pwren: nvme-pwren { + nvme_pwren: nvme-pwren-pins { function = "gpio"; }; - pcie1_reset_n: pcie1-reset-n { + pcie1_reset_n: pcie1-reset-n-pins { pins = "gpio2"; function = "gpio"; @@ -570,7 +773,7 @@ bias-disable; }; - pcie1_wake_n: pcie1-wake-n { + pcie1_wake_n: pcie1-wake-n-pins { pins = "gpio3"; function = "gpio"; @@ -578,7 +781,7 @@ bias-pull-up; }; - qup_uart7_sleep_cts: qup-uart7-sleep-cts { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { pins = "gpio28"; function = "gpio"; /* @@ -591,7 +794,7 @@ bias-bus-hold; }; - qup_uart7_sleep_rts: qup-uart7-sleep-rts { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { pins = "gpio29"; function = "gpio"; /* @@ -603,7 +806,7 @@ bias-pull-down; }; - qup_uart7_sleep_tx: qup-uart7-sleep-tx { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { pins = "gpio30"; function = "gpio"; /* @@ -613,7 +816,7 @@ bias-pull-up; }; - qup_uart7_sleep_rx: qup-uart7-sleep-rx { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { pins = "gpio31"; function = "gpio"; /* @@ -624,15 +827,28 @@ bias-pull-up; }; - sd_cd: sd-cd { + sd_cd: sd-cd-pins { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - sw_ctrl: sw-ctrl { + sw_ctrl: sw-ctrl-pins { pins = "gpio86"; function = "gpio"; bias-pull-down; }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 7adf31bb9827..4b8c676b0bb1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -28,6 +28,38 @@ bluetooth0 = &bluetooth; serial0 = &uart5; serial1 = &uart7; + wifi0 = &wifi; + }; + + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + + status = "disabled"; }; pm8350c_pwm_backlight: backlight { @@ -309,6 +341,10 @@ modem-init; }; +&lpass_va_macro { + vdd-micb-supply = <&vreg_bob>; +}; + /* NOTE: Not all Qcards have eDP connector stuffed */ &mdss_edp { aux-bus { @@ -378,6 +414,24 @@ no-sdio; }; +&swr0 { + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + uart_dbg: &uart5 { compatible = "qcom,geni-debug-uart"; status = "okay"; @@ -541,7 +595,7 @@ mos_bt_uart: &uart7 { }; &tlmm { - mos_bt_en: mos-bt-en { + mos_bt_en: mos-bt-en-pins { pins = "gpio85"; function = "gpio"; drive-strength = <2>; @@ -549,7 +603,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_cts: qup-uart7-sleep-cts { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { pins = "gpio28"; function = "gpio"; /* @@ -563,7 +617,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rts: qup-uart7-sleep-rts { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { pins = "gpio29"; function = "gpio"; /* @@ -576,7 +630,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rx: qup-uart7-sleep-rx { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { pins = "gpio31"; function = "gpio"; /* @@ -588,7 +642,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_tx: qup-uart7-sleep-tx { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { pins = "gpio30"; function = "gpio"; /* @@ -598,15 +652,35 @@ mos_bt_uart: &uart7 { bias-pull-up; }; - ts_int_conn: ts-int-conn { + ts_int_conn: ts-int-conn-pins { pins = "gpio55"; function = "gpio"; bias-pull-up; }; - ts_rst_conn: ts-rst-conn { + ts_rst_conn: ts-rst-conn-pins { pins = "gpio54"; function = "gpio"; drive-strength = <2>; }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 13d7f267b289..4489a77611e8 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -22,6 +22,7 @@ #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,lpass.h> #include <dt-bindings/thermal/thermal.h> / { @@ -828,6 +829,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SC7280_CX>; }; ipcc: mailbox@408000 { @@ -2043,7 +2045,9 @@ <&gcc GCC_PCIE_1_SLV_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&gcc GCC_DDRSS_PCIE_SF_CLK>; + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; clock-names = "pipe", "pipe_mux", @@ -2055,7 +2059,9 @@ "bus_slave", "slave_q2a", "tbu", - "ddrss_sf_tbu"; + "ddrss_sf_tbu", + "aggre0", + "aggre1"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2155,12 +2161,17 @@ }; tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex", "syscon"; - reg = <0 0x01f40000 0 0x40000>; + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; #hwlock-cells = <1>; }; - tcsr: syscon@1fc0000 { + tcsr_1: syscon@1f60000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tcsr_2: syscon@1fc0000 { compatible = "qcom,sc7280-tcsr", "syscon"; reg = <0 0x01fc0000 0 0x30000>; }; @@ -2168,14 +2179,121 @@ lpasscc: lpasscc@3000000 { compatible = "qcom,sc7280-lpasscc"; reg = <0 0x03000000 0 0x40>, - <0 0x03c04000 0 0x4>, - <0 0x03389000 0 0x24>; - reg-names = "qdsp6ss", "top_cc", "cc"; + <0 0x03c04000 0 0x4>; + reg-names = "qdsp6ss", "top_cc"; clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; clock-names = "iface"; #clock-cells = <1>; }; + lpass_rx_macro: codec@3200000 { + compatible = "qcom,sc7280-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr0: soundwire@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rx_macro>; + clock-names = "iface"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_tx_macro: codec@3220000 { + compatible = "qcom,sc7280-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr1: soundwire@3230000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03230000 0 0x2000>; + + interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_tx_macro>; + clock-names = "iface"; + + qcom,din-ports = <3>; + qcom,dout-ports = <0>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; + qcom,port-offset = <1>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + lpass_audiocc: clock-controller@3300000 { compatible = "qcom,sc7280-lpassaudiocc"; reg = <0 0x03300000 0 0x30000>; @@ -2185,6 +2303,27 @@ power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; #clock-cells = <1>; #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + lpass_va_macro: codec@3370000 { + compatible = "qcom,sc7280-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>; + clock-names = "mclk"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; }; lpass_aon: clock-controller@3380000 { @@ -2192,13 +2331,13 @@ reg = <0 0x03380000 0 0x30000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, - <&lpasscore LPASS_CORE_CC_CORE_CLK>; + <&lpass_core LPASS_CORE_CC_CORE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; #clock-cells = <1>; #power-domain-cells = <1>; }; - lpasscore: clock-controller@3900000 { + lpass_core: clock-controller@3900000 { compatible = "qcom,sc7280-lpasscorecc"; reg = <0 0x03900000 0 0x50000>; clocks = <&rpmhcc RPMH_CXO_CLK>; @@ -2208,6 +2347,67 @@ #power-domain-cells = <1>; }; + lpass_cpu: audio@3987000 { + compatible = "qcom,sc7280-lpass-cpu"; + + reg = <0 0x03987000 0 0x68000>, + <0 0x03b00000 0 0x29000>, + <0 0x03260000 0 0xc000>, + <0 0x03280000 0 0x29000>, + <0 0x03340000 0 0x29000>, + <0 0x0336c000 0 0x3000>; + reg-names = "lpass-hdmiif", + "lpass-lpaif", + "lpass-rxtx-cdc-dma-lpm", + "lpass-rxtx-lpaif", + "lpass-va-lpaif", + "lpass-va-cdc-dma-lpm"; + + iommus = <&apps_smmu 0x1820 0>, + <&apps_smmu 0x1821 0>, + <&apps_smmu 0x1832 0>; + + power-domains = <&rpmhpd SC7280_LCX>; + power-domain-names = "lcx"; + required-opps = <&rpmhpd_opp_nom>; + + clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>, + <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>, + <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>; + clock-names = "aon_cc_audio_hm_h", + "audio_cc_ext_mclk0", + "core_cc_sysnoc_mport_core", + "core_cc_ext_if0_ibit", + "core_cc_ext_if1_ibit", + "audio_cc_codec_mem", + "audio_cc_codec_mem0", + "audio_cc_codec_mem1", + "audio_cc_codec_mem2", + "aon_cc_va_mem0"; + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif", + "lpass-irq-hdmi", + "lpass-irq-vaif", + "lpass-irq-rxtxif"; + + status = "disabled"; + }; + lpass_hm: clock-controller@3c00000 { compatible = "qcom,sc7280-lpasshm"; reg = <0 0x3c00000 0 0x28>; @@ -2352,11 +2552,19 @@ opp-supported-hw = <0x03>; }; - opp-550000000 { + /* Only applicable for SKUs which has 550Mhz as Fmax */ + opp-550000000-0 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x01>; + }; + + opp-550000000-1 { opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <6832000>; - opp-supported-hw = <0x03>; + opp-supported-hw = <0x02>; }; opp-608000000 { @@ -2522,9 +2730,9 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; - qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>; - qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; + qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; status = "disabled"; @@ -3181,6 +3389,7 @@ "dm_hs_phy_irq"; power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -3259,7 +3468,7 @@ <&pdc_reset PDC_WPSS_SYNC_RESET>; reset-names = "restart", "pdc_sync"; - qcom,halt-regs = <&tcsr_mutex 0x37000>; + qcom,halt-regs = <&tcsr_1 0x17000>; status = "disabled"; @@ -3275,6 +3484,82 @@ }; }; + pmu@9091000 { + compatible = "qcom,sc7280-llcc-bwmon"; + reg = <0 0x9091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <2188000>; + }; + opp-3 { + opp-peak-kBps = <3072000>; + }; + opp-4 { + opp-peak-kBps = <4068000>; + }; + opp-5 { + opp-peak-kBps = <6220000>; + }; + opp-6 { + opp-peak-kBps = <6832000>; + }; + opp-7 { + opp-peak-kBps = <8532000>; + }; + }; + }; + + pmu@90b6400 { + compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x090b6400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2400000>; + }; + opp-1 { + opp-peak-kBps = <4800000>; + }; + opp-2 { + opp-peak-kBps = <7456000>; + }; + opp-3 { + opp-peak-kBps = <9600000>; + }; + opp-4 { + opp-peak-kBps = <12896000>; + }; + opp-5 { + opp-peak-kBps = <14928000>; + }; + opp-6 { + opp-peak-kBps = <17056000>; + }; + }; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -3367,6 +3652,7 @@ "ss_phy_irq"; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -3971,791 +4257,791 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - dp_hot_plug_det: dp-hot-plug-det { + dp_hot_plug_det: dp-hot-plug-det-pins { pins = "gpio47"; function = "dp_hot"; }; - edp_hot_plug_det: edp-hot-plug-det { + edp_hot_plug_det: edp-hot-plug-det-pins { pins = "gpio60"; function = "edp_hot"; }; - mi2s0_data0: mi2s0-data0 { + mi2s0_data0: mi2s0-data0-pins { pins = "gpio98"; function = "mi2s0_data0"; }; - mi2s0_data1: mi2s0-data1 { + mi2s0_data1: mi2s0-data1-pins { pins = "gpio99"; function = "mi2s0_data1"; }; - mi2s0_mclk: mi2s0-mclk { + mi2s0_mclk: mi2s0-mclk-pins { pins = "gpio96"; function = "pri_mi2s"; }; - mi2s0_sclk: mi2s0-sclk { + mi2s0_sclk: mi2s0-sclk-pins { pins = "gpio97"; function = "mi2s0_sck"; }; - mi2s0_ws: mi2s0-ws { + mi2s0_ws: mi2s0-ws-pins { pins = "gpio100"; function = "mi2s0_ws"; }; - mi2s1_data0: mi2s1-data0 { + mi2s1_data0: mi2s1-data0-pins { pins = "gpio107"; function = "mi2s1_data0"; }; - mi2s1_sclk: mi2s1-sclk { + mi2s1_sclk: mi2s1-sclk-pins { pins = "gpio106"; function = "mi2s1_sck"; }; - mi2s1_ws: mi2s1-ws { + mi2s1_ws: mi2s1-ws-pins { pins = "gpio108"; function = "mi2s1_ws"; }; - pcie1_clkreq_n: pcie1-clkreq-n { + pcie1_clkreq_n: pcie1-clkreq-n-pins { pins = "gpio79"; function = "pcie1_clkreqn"; }; - qspi_clk: qspi-clk { + qspi_clk: qspi-clk-pins { pins = "gpio14"; function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { + qspi_cs0: qspi-cs0-pins { pins = "gpio15"; function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { + qspi_cs1: qspi-cs1-pins { pins = "gpio19"; function = "qspi_cs"; }; - qspi_data01: qspi-data01 { + qspi_data01: qspi-data01-pins { pins = "gpio12", "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12 { + qspi_data12: qspi-data12-pins { pins = "gpio16", "gpio17"; function = "qspi_data"; }; - qup_i2c0_data_clk: qup-i2c0-data-clk { + qup_i2c0_data_clk: qup-i2c0-data-clk-pins { pins = "gpio0", "gpio1"; function = "qup00"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk { + qup_i2c1_data_clk: qup-i2c1-data-clk-pins { pins = "gpio4", "gpio5"; function = "qup01"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk { + qup_i2c2_data_clk: qup-i2c2-data-clk-pins { pins = "gpio8", "gpio9"; function = "qup02"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk { + qup_i2c3_data_clk: qup-i2c3-data-clk-pins { pins = "gpio12", "gpio13"; function = "qup03"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk { + qup_i2c4_data_clk: qup-i2c4-data-clk-pins { pins = "gpio16", "gpio17"; function = "qup04"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk { + qup_i2c5_data_clk: qup-i2c5-data-clk-pins { pins = "gpio20", "gpio21"; function = "qup05"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk { + qup_i2c6_data_clk: qup-i2c6-data-clk-pins { pins = "gpio24", "gpio25"; function = "qup06"; }; - qup_i2c7_data_clk: qup-i2c7-data-clk { + qup_i2c7_data_clk: qup-i2c7-data-clk-pins { pins = "gpio28", "gpio29"; function = "qup07"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk { + qup_i2c8_data_clk: qup-i2c8-data-clk-pins { pins = "gpio32", "gpio33"; function = "qup10"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk { + qup_i2c9_data_clk: qup-i2c9-data-clk-pins { pins = "gpio36", "gpio37"; function = "qup11"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk { + qup_i2c10_data_clk: qup-i2c10-data-clk-pins { pins = "gpio40", "gpio41"; function = "qup12"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk { + qup_i2c11_data_clk: qup-i2c11-data-clk-pins { pins = "gpio44", "gpio45"; function = "qup13"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk { + qup_i2c12_data_clk: qup-i2c12-data-clk-pins { pins = "gpio48", "gpio49"; function = "qup14"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk { + qup_i2c13_data_clk: qup-i2c13-data-clk-pins { pins = "gpio52", "gpio53"; function = "qup15"; }; - qup_i2c14_data_clk: qup-i2c14-data-clk { + qup_i2c14_data_clk: qup-i2c14-data-clk-pins { pins = "gpio56", "gpio57"; function = "qup16"; }; - qup_i2c15_data_clk: qup-i2c15-data-clk { + qup_i2c15_data_clk: qup-i2c15-data-clk-pins { pins = "gpio60", "gpio61"; function = "qup17"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-pins { pins = "gpio0", "gpio1", "gpio2"; function = "qup00"; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-pins { pins = "gpio3"; function = "qup00"; }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio { + qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins { pins = "gpio3"; function = "gpio"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-pins { pins = "gpio4", "gpio5", "gpio6"; function = "qup01"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-pins { pins = "gpio7"; function = "qup01"; }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio { + qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins { pins = "gpio7"; function = "gpio"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-pins { pins = "gpio8", "gpio9", "gpio10"; function = "qup02"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-pins { pins = "gpio11"; function = "qup02"; }; - qup_spi2_cs_gpio: qup-spi2-cs-gpio { + qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins { pins = "gpio11"; function = "gpio"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-pins { pins = "gpio12", "gpio13", "gpio14"; function = "qup03"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-pins { pins = "gpio15"; function = "qup03"; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio { + qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins { pins = "gpio15"; function = "gpio"; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-pins { pins = "gpio16", "gpio17", "gpio18"; function = "qup04"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-pins { pins = "gpio19"; function = "qup04"; }; - qup_spi4_cs_gpio: qup-spi4-cs-gpio { + qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins { pins = "gpio19"; function = "gpio"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-pins { pins = "gpio20", "gpio21", "gpio22"; function = "qup05"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-pins { pins = "gpio23"; function = "qup05"; }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio { + qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins { pins = "gpio23"; function = "gpio"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-pins { pins = "gpio24", "gpio25", "gpio26"; function = "qup06"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-pins { pins = "gpio27"; function = "qup06"; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio { + qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins { pins = "gpio27"; function = "gpio"; }; - qup_spi7_data_clk: qup-spi7-data-clk { + qup_spi7_data_clk: qup-spi7-data-clk-pins { pins = "gpio28", "gpio29", "gpio30"; function = "qup07"; }; - qup_spi7_cs: qup-spi7-cs { + qup_spi7_cs: qup-spi7-cs-pins { pins = "gpio31"; function = "qup07"; }; - qup_spi7_cs_gpio: qup-spi7-cs-gpio { + qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins { pins = "gpio31"; function = "gpio"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-pins { pins = "gpio32", "gpio33", "gpio34"; function = "qup10"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-pins { pins = "gpio35"; function = "qup10"; }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio { + qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins { pins = "gpio35"; function = "gpio"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-pins { pins = "gpio36", "gpio37", "gpio38"; function = "qup11"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-pins { pins = "gpio39"; function = "qup11"; }; - qup_spi9_cs_gpio: qup-spi9-cs-gpio { + qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins { pins = "gpio39"; function = "gpio"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-pins { pins = "gpio40", "gpio41", "gpio42"; function = "qup12"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-pins { pins = "gpio43"; function = "qup12"; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio { + qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins { pins = "gpio43"; function = "gpio"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-pins { pins = "gpio44", "gpio45", "gpio46"; function = "qup13"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-pins { pins = "gpio47"; function = "qup13"; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio { + qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins { pins = "gpio47"; function = "gpio"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-pins { pins = "gpio48", "gpio49", "gpio50"; function = "qup14"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-pins { pins = "gpio51"; function = "qup14"; }; - qup_spi12_cs_gpio: qup-spi12-cs-gpio { + qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins { pins = "gpio51"; function = "gpio"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-pins { pins = "gpio52", "gpio53", "gpio54"; function = "qup15"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-pins { pins = "gpio55"; function = "qup15"; }; - qup_spi13_cs_gpio: qup-spi13-cs-gpio { + qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins { pins = "gpio55"; function = "gpio"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-pins { pins = "gpio56", "gpio57", "gpio58"; function = "qup16"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-pins { pins = "gpio59"; function = "qup16"; }; - qup_spi14_cs_gpio: qup-spi14-cs-gpio { + qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins { pins = "gpio59"; function = "gpio"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-pins { pins = "gpio60", "gpio61", "gpio62"; function = "qup17"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-pins { pins = "gpio63"; function = "qup17"; }; - qup_spi15_cs_gpio: qup-spi15-cs-gpio { + qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins { pins = "gpio63"; function = "gpio"; }; - qup_uart0_cts: qup-uart0-cts { + qup_uart0_cts: qup-uart0-cts-pins { pins = "gpio0"; function = "qup00"; }; - qup_uart0_rts: qup-uart0-rts { + qup_uart0_rts: qup-uart0-rts-pins { pins = "gpio1"; function = "qup00"; }; - qup_uart0_tx: qup-uart0-tx { + qup_uart0_tx: qup-uart0-tx-pins { pins = "gpio2"; function = "qup00"; }; - qup_uart0_rx: qup-uart0-rx { + qup_uart0_rx: qup-uart0-rx-pins { pins = "gpio3"; function = "qup00"; }; - qup_uart1_cts: qup-uart1-cts { + qup_uart1_cts: qup-uart1-cts-pins { pins = "gpio4"; function = "qup01"; }; - qup_uart1_rts: qup-uart1-rts { + qup_uart1_rts: qup-uart1-rts-pins { pins = "gpio5"; function = "qup01"; }; - qup_uart1_tx: qup-uart1-tx { + qup_uart1_tx: qup-uart1-tx-pins { pins = "gpio6"; function = "qup01"; }; - qup_uart1_rx: qup-uart1-rx { + qup_uart1_rx: qup-uart1-rx-pins { pins = "gpio7"; function = "qup01"; }; - qup_uart2_cts: qup-uart2-cts { + qup_uart2_cts: qup-uart2-cts-pins { pins = "gpio8"; function = "qup02"; }; - qup_uart2_rts: qup-uart2-rts { + qup_uart2_rts: qup-uart2-rts-pins { pins = "gpio9"; function = "qup02"; }; - qup_uart2_tx: qup-uart2-tx { + qup_uart2_tx: qup-uart2-tx-pins { pins = "gpio10"; function = "qup02"; }; - qup_uart2_rx: qup-uart2-rx { + qup_uart2_rx: qup-uart2-rx-pins { pins = "gpio11"; function = "qup02"; }; - qup_uart3_cts: qup-uart3-cts { + qup_uart3_cts: qup-uart3-cts-pins { pins = "gpio12"; function = "qup03"; }; - qup_uart3_rts: qup-uart3-rts { + qup_uart3_rts: qup-uart3-rts-pins { pins = "gpio13"; function = "qup03"; }; - qup_uart3_tx: qup-uart3-tx { + qup_uart3_tx: qup-uart3-tx-pins { pins = "gpio14"; function = "qup03"; }; - qup_uart3_rx: qup-uart3-rx { + qup_uart3_rx: qup-uart3-rx-pins { pins = "gpio15"; function = "qup03"; }; - qup_uart4_cts: qup-uart4-cts { + qup_uart4_cts: qup-uart4-cts-pins { pins = "gpio16"; function = "qup04"; }; - qup_uart4_rts: qup-uart4-rts { + qup_uart4_rts: qup-uart4-rts-pins { pins = "gpio17"; function = "qup04"; }; - qup_uart4_tx: qup-uart4-tx { + qup_uart4_tx: qup-uart4-tx-pins { pins = "gpio18"; function = "qup04"; }; - qup_uart4_rx: qup-uart4-rx { + qup_uart4_rx: qup-uart4-rx-pins { pins = "gpio19"; function = "qup04"; }; - qup_uart5_cts: qup-uart5-cts { + qup_uart5_cts: qup-uart5-cts-pins { pins = "gpio20"; function = "qup05"; }; - qup_uart5_rts: qup-uart5-rts { + qup_uart5_rts: qup-uart5-rts-pins { pins = "gpio21"; function = "qup05"; }; - qup_uart5_tx: qup-uart5-tx { + qup_uart5_tx: qup-uart5-tx-pins { pins = "gpio22"; function = "qup05"; }; - qup_uart5_rx: qup-uart5-rx { + qup_uart5_rx: qup-uart5-rx-pins { pins = "gpio23"; function = "qup05"; }; - qup_uart6_cts: qup-uart6-cts { + qup_uart6_cts: qup-uart6-cts-pins { pins = "gpio24"; function = "qup06"; }; - qup_uart6_rts: qup-uart6-rts { + qup_uart6_rts: qup-uart6-rts-pins { pins = "gpio25"; function = "qup06"; }; - qup_uart6_tx: qup-uart6-tx { + qup_uart6_tx: qup-uart6-tx-pins { pins = "gpio26"; function = "qup06"; }; - qup_uart6_rx: qup-uart6-rx { + qup_uart6_rx: qup-uart6-rx-pins { pins = "gpio27"; function = "qup06"; }; - qup_uart7_cts: qup-uart7-cts { + qup_uart7_cts: qup-uart7-cts-pins { pins = "gpio28"; function = "qup07"; }; - qup_uart7_rts: qup-uart7-rts { + qup_uart7_rts: qup-uart7-rts-pins { pins = "gpio29"; function = "qup07"; }; - qup_uart7_tx: qup-uart7-tx { + qup_uart7_tx: qup-uart7-tx-pins { pins = "gpio30"; function = "qup07"; }; - qup_uart7_rx: qup-uart7-rx { + qup_uart7_rx: qup-uart7-rx-pins { pins = "gpio31"; function = "qup07"; }; - qup_uart8_cts: qup-uart8-cts { + qup_uart8_cts: qup-uart8-cts-pins { pins = "gpio32"; function = "qup10"; }; - qup_uart8_rts: qup-uart8-rts { + qup_uart8_rts: qup-uart8-rts-pins { pins = "gpio33"; function = "qup10"; }; - qup_uart8_tx: qup-uart8-tx { + qup_uart8_tx: qup-uart8-tx-pins { pins = "gpio34"; function = "qup10"; }; - qup_uart8_rx: qup-uart8-rx { + qup_uart8_rx: qup-uart8-rx-pins { pins = "gpio35"; function = "qup10"; }; - qup_uart9_cts: qup-uart9-cts { + qup_uart9_cts: qup-uart9-cts-pins { pins = "gpio36"; function = "qup11"; }; - qup_uart9_rts: qup-uart9-rts { + qup_uart9_rts: qup-uart9-rts-pins { pins = "gpio37"; function = "qup11"; }; - qup_uart9_tx: qup-uart9-tx { + qup_uart9_tx: qup-uart9-tx-pins { pins = "gpio38"; function = "qup11"; }; - qup_uart9_rx: qup-uart9-rx { + qup_uart9_rx: qup-uart9-rx-pins { pins = "gpio39"; function = "qup11"; }; - qup_uart10_cts: qup-uart10-cts { + qup_uart10_cts: qup-uart10-cts-pins { pins = "gpio40"; function = "qup12"; }; - qup_uart10_rts: qup-uart10-rts { + qup_uart10_rts: qup-uart10-rts-pins { pins = "gpio41"; function = "qup12"; }; - qup_uart10_tx: qup-uart10-tx { + qup_uart10_tx: qup-uart10-tx-pins { pins = "gpio42"; function = "qup12"; }; - qup_uart10_rx: qup-uart10-rx { + qup_uart10_rx: qup-uart10-rx-pins { pins = "gpio43"; function = "qup12"; }; - qup_uart11_cts: qup-uart11-cts { + qup_uart11_cts: qup-uart11-cts-pins { pins = "gpio44"; function = "qup13"; }; - qup_uart11_rts: qup-uart11-rts { + qup_uart11_rts: qup-uart11-rts-pins { pins = "gpio45"; function = "qup13"; }; - qup_uart11_tx: qup-uart11-tx { + qup_uart11_tx: qup-uart11-tx-pins { pins = "gpio46"; function = "qup13"; }; - qup_uart11_rx: qup-uart11-rx { + qup_uart11_rx: qup-uart11-rx-pins { pins = "gpio47"; function = "qup13"; }; - qup_uart12_cts: qup-uart12-cts { + qup_uart12_cts: qup-uart12-cts-pins { pins = "gpio48"; function = "qup14"; }; - qup_uart12_rts: qup-uart12-rts { + qup_uart12_rts: qup-uart12-rts-pins { pins = "gpio49"; function = "qup14"; }; - qup_uart12_tx: qup-uart12-tx { + qup_uart12_tx: qup-uart12-tx-pins { pins = "gpio50"; function = "qup14"; }; - qup_uart12_rx: qup-uart12-rx { + qup_uart12_rx: qup-uart12-rx-pins { pins = "gpio51"; function = "qup14"; }; - qup_uart13_cts: qup-uart13-cts { + qup_uart13_cts: qup-uart13-cts-pins { pins = "gpio52"; function = "qup15"; }; - qup_uart13_rts: qup-uart13-rts { + qup_uart13_rts: qup-uart13-rts-pins { pins = "gpio53"; function = "qup15"; }; - qup_uart13_tx: qup-uart13-tx { + qup_uart13_tx: qup-uart13-tx-pins { pins = "gpio54"; function = "qup15"; }; - qup_uart13_rx: qup-uart13-rx { + qup_uart13_rx: qup-uart13-rx-pins { pins = "gpio55"; function = "qup15"; }; - qup_uart14_cts: qup-uart14-cts { + qup_uart14_cts: qup-uart14-cts-pins { pins = "gpio56"; function = "qup16"; }; - qup_uart14_rts: qup-uart14-rts { + qup_uart14_rts: qup-uart14-rts-pins { pins = "gpio57"; function = "qup16"; }; - qup_uart14_tx: qup-uart14-tx { + qup_uart14_tx: qup-uart14-tx-pins { pins = "gpio58"; function = "qup16"; }; - qup_uart14_rx: qup-uart14-rx { + qup_uart14_rx: qup-uart14-rx-pins { pins = "gpio59"; function = "qup16"; }; - qup_uart15_cts: qup-uart15-cts { + qup_uart15_cts: qup-uart15-cts-pins { pins = "gpio60"; function = "qup17"; }; - qup_uart15_rts: qup-uart15-rts { + qup_uart15_rts: qup-uart15-rts-pins { pins = "gpio61"; function = "qup17"; }; - qup_uart15_tx: qup-uart15-tx { + qup_uart15_tx: qup-uart15-tx-pins { pins = "gpio62"; function = "qup17"; }; - qup_uart15_rx: qup-uart15-rx { + qup_uart15_rx: qup-uart15-rx-pins { pins = "gpio63"; function = "qup17"; }; - sdc1_clk: sdc1-clk { + sdc1_clk: sdc1-clk-pins { pins = "sdc1_clk"; }; - sdc1_cmd: sdc1-cmd { + sdc1_cmd: sdc1-cmd-pins { pins = "sdc1_cmd"; }; - sdc1_data: sdc1-data { + sdc1_data: sdc1-data-pins { pins = "sdc1_data"; }; - sdc1_rclk: sdc1-rclk { + sdc1_rclk: sdc1-rclk-pins { pins = "sdc1_rclk"; }; - sdc1_clk_sleep: sdc1-clk-sleep { + sdc1_clk_sleep: sdc1-clk-sleep-pins { pins = "sdc1_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc1_cmd_sleep: sdc1-cmd-sleep { + sdc1_cmd_sleep: sdc1-cmd-sleep-pins { pins = "sdc1_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc1_data_sleep: sdc1-data-sleep { + sdc1_data_sleep: sdc1-data-sleep-pins { pins = "sdc1_data"; drive-strength = <2>; bias-bus-hold; }; - sdc1_rclk_sleep: sdc1-rclk-sleep { + sdc1_rclk_sleep: sdc1-rclk-sleep-pins { pins = "sdc1_rclk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_clk: sdc2-clk { + sdc2_clk: sdc2-clk-pins { pins = "sdc2_clk"; }; - sdc2_cmd: sdc2-cmd { + sdc2_cmd: sdc2-cmd-pins { pins = "sdc2_cmd"; }; - sdc2_data: sdc2-data { + sdc2_data: sdc2-data-pins { pins = "sdc2_data"; }; - sdc2_clk_sleep: sdc2-clk-sleep { + sdc2_clk_sleep: sdc2-clk-sleep-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_cmd_sleep: sdc2-cmd-sleep { + sdc2_cmd_sleep: sdc2-cmd-sleep-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc2_data_sleep: sdc2-data-sleep { + sdc2_data_sleep: sdc2-data-sleep-pins { pins = "sdc2_data"; drive-strength = <2>; bias-bus-hold; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 45058ad0a1c8..fea7d8273ccd 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -87,7 +87,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; regulator-always-on; }; @@ -97,7 +96,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6b: ldo6 { @@ -105,7 +103,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; }; }; @@ -119,7 +116,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7c: ldo7 { @@ -135,7 +131,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; @@ -158,7 +153,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6d: ldo6 { @@ -166,7 +160,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7d: ldo7 { @@ -174,7 +167,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l9d: ldo9 { @@ -182,7 +174,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; }; @@ -203,16 +194,20 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + pinctrl-0 = <&qup0_i2c4_default>; status = "okay"; touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; }; }; @@ -228,24 +223,36 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + pinctrl-0 = <&qup2_i2c5_default>; status = "okay"; touchpad@15 { compatible = "hid-over-i2c"; reg = <0x15>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; }; keyboard@68 { compatible = "hid-over-i2c"; reg = <0x68>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; }; }; @@ -414,7 +421,7 @@ int-n { pins = "gpio175"; function = "gpio"; - bias-pull-up; + bias-disable; }; reset-n { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 84dc92dda0b8..bdeb2d05aaa1 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -79,7 +79,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; }; @@ -88,7 +87,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l6b: ldo6 { @@ -96,7 +94,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; regulator-boot-on; regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 }; @@ -111,7 +108,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l12c: ldo12 { @@ -119,7 +115,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l13c: ldo13 { @@ -127,7 +122,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; @@ -142,7 +136,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l4d: ldo4 { @@ -150,7 +143,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l7d: ldo7 { @@ -158,7 +150,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; vreg_l9d: ldo9 { @@ -166,7 +157,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; }; }; }; @@ -187,7 +177,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + pinctrl-0 = <&qup0_i2c4_default>; status = "okay"; @@ -195,9 +185,13 @@ touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; }; }; @@ -213,24 +207,52 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + pinctrl-0 = <&qup2_i2c5_default>; status = "okay"; + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + + status = "disabled"; + }; + touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; + hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; }; keyboard@68 { compatible = "hid-over-i2c"; reg = <0x68>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; }; }; @@ -373,7 +395,7 @@ int-n { pins = "gpio175"; function = "gpio"; - bias-pull-up; + bias-disable; }; reset-n { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index ae90b97aecb8..24836b6b9bbc 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -60,9 +60,8 @@ #interrupt-cells = <2>; }; - pmc8280c_lpg: lpg@e800 { + pmc8280c_lpg: pwm { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 49ea8b5612fc..c32bcded2aef 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -1312,6 +1312,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + status = "disabled"; usb_0_dwc3: usb@a600000 { @@ -1364,6 +1366,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + status = "disabled"; usb_1_dwc3: usb@a800000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 1bc9091cad2a..b51b85f583e5 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -697,9 +697,15 @@ #thermal-sensor-cells = <1>; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x01f40000 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm630-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; }; tlmm: pinctrl@3100000 { @@ -2351,12 +2357,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - sound: sound { }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c6e2c571b452..132417e2d11e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -522,7 +522,7 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&pcie0_3p3v_dual>; @@ -540,7 +540,7 @@ &pcie1 { status = "okay"; - perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; @@ -1081,7 +1081,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; @@ -1214,8 +1214,6 @@ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; - gpios = <&tlmm 13 0>, - <&tlmm 9 GPIO_ACTIVE_LOW>; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "xvclk"; @@ -1228,8 +1226,6 @@ * both have to be enabled through the power management * gpios. */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - dovdd-supply = <&vreg_lvs1a_1p8>; avdd-supply = <&cam0_avdd_2v8>; dvdd-supply = <&cam0_dvdd_1v2>; @@ -1255,11 +1251,9 @@ reg = <0x60>; // CAM3_RST_N - enable-gpios = <&tlmm 21 0>; + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; - gpios = <&tlmm 16 0>, - <&tlmm 21 0>; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "xclk"; @@ -1273,8 +1267,6 @@ * * No 1.2V vddd-supply regulator is used. */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - vdddo-supply = <&vreg_lvs1a_1p8>; vdda-supply = <&cam3_avdd_2v8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 7713e8060c5b..de2d10e0315a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -536,42 +536,42 @@ reg = <ADC5_XO_THERM_100K_PU>; label = "xo_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@4d { reg = <ADC5_AMUX_THM1_100K_PU>; label = "msm_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@4f { reg = <ADC5_AMUX_THM3_100K_PU>; label = "pa_therm1"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@51 { reg = <ADC5_AMUX_THM5_100K_PU>; label = "quiet_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@83 { reg = <ADC5_VPH_PWR>; label = "vph_pwr"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@85 { reg = <ADC5_VCOIN>; label = "vcoin"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 82c27f90d300..0f470cf1ed1c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -546,7 +546,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 7747081b9887..afc17e4d403f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -126,7 +126,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&tlmm 23 0>; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; regulator-always-on; regulator-boot-on; enable-active-high; @@ -522,7 +522,7 @@ }; &pm8998_gpio { - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; function = "normal"; @@ -617,7 +617,7 @@ pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <8>; - bias-disable = <0>; + bias-disable; }; sde_dsi_suspend: sde-dsi-suspend { @@ -712,7 +712,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f0e286715d1b..d761da47220d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -919,12 +919,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; @@ -2138,11 +2132,48 @@ llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; + reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + pmu@114a000 { + compatible = "qcom,sdm845-llcc-bwmon"; + reg = <0 0x0114a000 0 0x1000>; + interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for gladiator_noc-mem_noc + * interconnect. This also matches the + * bandwidth table of qcom,llccbw (qcom,bw-tbl, + * bus width: 4 bytes) from msm-4.9 downstream + * kernel. + */ + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <3072000>; + }; + opp-3 { + opp-peak-kBps = <5412000>; + }; + opp-4 { + opp-peak-kBps = <7216000>; + }; + }; + }; + pmu@1436400 { compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; reg = <0 0x01436400 0 0x600>; @@ -2588,9 +2619,15 @@ status = "disabled"; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm845-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; }; tlmm: pinctrl@3400000 { @@ -3207,7 +3244,7 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>, @@ -4836,7 +4873,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -4851,6 +4888,11 @@ }; }; + sram@c3f0000 { + compatible = "qcom,sdm845-rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index a7af1bed4312..be59a8ba9c1f 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -772,7 +772,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index b0315eeb1320..f954fe5cb61a 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -704,7 +704,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 0aad2e94e757..6a8b88cc4385 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -87,7 +87,7 @@ }; &sdc2_off_state { - sd-cd { + sd-cd-pins { pins = "gpio98"; drive-strength = <2>; bias-disable; @@ -95,7 +95,7 @@ }; &sdc2_on_state { - sd-cd { + sd-cd-pins { pins = "gpio98"; drive-strength = <2>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 8c582a9e4ada..1fe3fa3ad877 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -387,19 +387,19 @@ #interrupt-cells = <2>; sdc2_off_state: sdc2-off-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; @@ -413,13 +413,13 @@ bias-disable; }; - cmd { + cmd-pins-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index d06aefdf3d9e..c39de7d3ace0 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1,11 +1,14 @@ // SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Luca Weiss <luca.weiss@fairphone.com> */ #include <dt-bindings/clock/qcom,gcc-sm6350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sm6350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -517,6 +520,26 @@ }; }; + gpi_dma0: dma-controller@800000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x8c0000 0x0 0x2000>; @@ -537,8 +560,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -550,12 +580,39 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; }; + gpi_dma1: dma-controller@900000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 648 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 649 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 650 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x4d6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x9c0000 0x0 0x2000>; @@ -576,8 +633,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -589,8 +653,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -602,8 +673,15 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -615,6 +693,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -626,13 +707,67 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; }; + config_noc: interconnect@1500000 { + compatible = "qcom,sm6350-config-noc"; + reg = <0 0x01500000 0 0x28000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm6350-system-noc"; + reg = <0 0x01620000 0 0x17080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sm6350-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm6350-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm6350-aggre2-noc"; + reg = <0 0x01700000 0 0x1f880>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + compute_noc: interconnect-compute-noc { + compatible = "qcom,sm6350-compute-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm6350-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,sm6350-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -933,6 +1068,10 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd SM6350_CX>; @@ -947,11 +1086,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <790000 131000>; + opp-avg-kBps = <50000 50000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3190000 294000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -1017,12 +1160,33 @@ }; }; + dc_noc: interconnect@9160000 { + compatible = "qcom,sm6350-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + system-cache-controller@9200000 { compatible = "qcom,sm6350-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; }; + gem_noc: interconnect@9680000 { + compatible = "qcom,sm6350-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sm6350-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -1054,6 +1218,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -1146,49 +1314,49 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; - qup_uart9_default: qup-uart9-default { + qup_uart9_default: qup-uart9-default-state { pins = "gpio25", "gpio26"; function = "qup13_f2"; drive-strength = <2>; bias-disable; }; - qup_i2c0_default: qup-i2c0-default { + qup_i2c0_default: qup-i2c0-default-state { pins = "gpio0", "gpio1"; function = "qup00"; drive-strength = <2>; bias-pull-up; }; - qup_i2c2_default: qup-i2c2-default { + qup_i2c2_default: qup-i2c2-default-state { pins = "gpio45", "gpio46"; function = "qup02"; drive-strength = <2>; bias-pull-up; }; - qup_i2c6_default: qup-i2c6-default { + qup_i2c6_default: qup-i2c6-default-state { pins = "gpio13", "gpio14"; function = "qup10"; drive-strength = <2>; bias-pull-up; }; - qup_i2c7_default: qup-i2c7-default { + qup_i2c7_default: qup-i2c7-default-state { pins = "gpio27", "gpio28"; function = "qup11"; drive-strength = <2>; bias-pull-up; }; - qup_i2c8_default: qup-i2c8-default { + qup_i2c8_default: qup-i2c8-default-state { pins = "gpio19", "gpio20"; function = "qup12"; drive-strength = <2>; bias-pull-up; }; - qup_i2c10_default: qup-i2c10-default { + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio4", "gpio5"; function = "qup14"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index c76abe7587b4..30c94fd4fe61 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -12,6 +12,7 @@ #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" +#include "pm7250b.dtsi" / { model = "Fairphone 4"; @@ -70,6 +71,36 @@ qcom,vmid = <15>; }; }; + + thermal-zones { + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; }; &adsp { @@ -353,6 +384,42 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm7250b_adc { + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + adc-chan@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &qupv3_id_1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 7d509ecd44da..4d4722165eb0 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -585,12 +585,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -2054,9 +2048,15 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x0 0x01f40000 0x0 0x40000>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sm8150-tcsr", "syscon"; + reg = <0x0 0x01f60000 0x0 0x20000>; }; remoteproc_slpi: remoteproc@2400000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7ab3627cc347..a102aa5efa32 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -635,7 +635,7 @@ wcd938x: codec { compatible = "qcom,wcd9380-codec"; #sound-dai-cells = <1>; - reset-gpios = <&tlmm 32 0>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-rxtx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index bc773e210023..a5b62cadb129 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1792,7 +1792,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -1810,8 +1810,16 @@ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1893,7 +1901,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -2001,7 +2009,7 @@ }; pcie2: pci@1c10000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c10000 0 0x3000>, <0 0x64000000 0 0xf1d>, <0 0x64000f20 0 0xa8>, @@ -3571,6 +3579,25 @@ }; }; }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; dsi0_phy: dsi-phy@ae94400 { @@ -3663,25 +3690,6 @@ clock-names = "iface", "ref"; status = "disabled"; - - dsi_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-187500000 { - opp-hz = /bits/ 64 <187500000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index cb9bbd234b7b..b3c9952ac173 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -222,8 +222,8 @@ &tlmm { gpio-reserved-ranges = <44 4>; - ts_int_default: ts-int-default { - pin = "gpio23"; + ts_int_default: ts-int-default-state { + pins = "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e72a04411888..cd5503642a23 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1762,150 +1762,150 @@ wakeup-parent = <&pdc>; qup_uart3_default_state: qup-uart3-default-state { - rx { + rx-pins { pins = "gpio18"; function = "qup3"; }; - tx { + tx-pins { pins = "gpio19"; function = "qup3"; }; }; - qup_uart6_default: qup-uart6-default { + qup_uart6_default: qup-uart6-default-state { pins = "gpio30", "gpio31"; function = "qup6"; drive-strength = <2>; bias-disable; }; - qup_uart18_default: qup-uart18-default { + qup_uart18_default: qup-uart18-default-state { pins = "gpio58", "gpio59"; function = "qup18"; drive-strength = <2>; bias-disable; }; - qup_i2c0_default: qup-i2c0-default { + qup_i2c0_default: qup-i2c0-default-state { pins = "gpio4", "gpio5"; function = "qup0"; drive-strength = <2>; bias-pull-up; }; - qup_i2c1_default: qup-i2c1-default { + qup_i2c1_default: qup-i2c1-default-state { pins = "gpio8", "gpio9"; function = "qup1"; drive-strength = <2>; bias-pull-up; }; - qup_i2c2_default: qup-i2c2-default { + qup_i2c2_default: qup-i2c2-default-state { pins = "gpio12", "gpio13"; function = "qup2"; drive-strength = <2>; bias-pull-up; }; - qup_i2c4_default: qup-i2c4-default { + qup_i2c4_default: qup-i2c4-default-state { pins = "gpio20", "gpio21"; function = "qup4"; drive-strength = <2>; bias-pull-up; }; - qup_i2c5_default: qup-i2c5-default { + qup_i2c5_default: qup-i2c5-default-state { pins = "gpio24", "gpio25"; function = "qup5"; drive-strength = <2>; bias-pull-up; }; - qup_i2c6_default: qup-i2c6-default { + qup_i2c6_default: qup-i2c6-default-state { pins = "gpio28", "gpio29"; function = "qup6"; drive-strength = <2>; bias-pull-up; }; - qup_i2c7_default: qup-i2c7-default { + qup_i2c7_default: qup-i2c7-default-state { pins = "gpio32", "gpio33"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_i2c8_default: qup-i2c8-default { + qup_i2c8_default: qup-i2c8-default-state { pins = "gpio36", "gpio37"; function = "qup8"; drive-strength = <2>; bias-pull-up; }; - qup_i2c9_default: qup-i2c9-default { + qup_i2c9_default: qup-i2c9-default-state { pins = "gpio40", "gpio41"; function = "qup9"; drive-strength = <2>; bias-pull-up; }; - qup_i2c10_default: qup-i2c10-default { + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio44", "gpio45"; function = "qup10"; drive-strength = <2>; bias-pull-up; }; - qup_i2c11_default: qup-i2c11-default { + qup_i2c11_default: qup-i2c11-default-state { pins = "gpio48", "gpio49"; function = "qup11"; drive-strength = <2>; bias-pull-up; }; - qup_i2c12_default: qup-i2c12-default { + qup_i2c12_default: qup-i2c12-default-state { pins = "gpio52", "gpio53"; function = "qup12"; drive-strength = <2>; bias-pull-up; }; - qup_i2c13_default: qup-i2c13-default { + qup_i2c13_default: qup-i2c13-default-state { pins = "gpio0", "gpio1"; function = "qup13"; drive-strength = <2>; bias-pull-up; }; - qup_i2c14_default: qup-i2c14-default { + qup_i2c14_default: qup-i2c14-default-state { pins = "gpio56", "gpio57"; function = "qup14"; drive-strength = <2>; bias-disable; }; - qup_i2c15_default: qup-i2c15-default { + qup_i2c15_default: qup-i2c15-default-state { pins = "gpio60", "gpio61"; function = "qup15"; drive-strength = <2>; bias-disable; }; - qup_i2c16_default: qup-i2c16-default { + qup_i2c16_default: qup-i2c16-default-state { pins = "gpio64", "gpio65"; function = "qup16"; drive-strength = <2>; bias-disable; }; - qup_i2c17_default: qup-i2c17-default { + qup_i2c17_default: qup-i2c17-default-state { pins = "gpio72", "gpio73"; function = "qup17"; drive-strength = <2>; bias-disable; }; - qup_i2c19_default: qup-i2c19-default { + qup_i2c19_default: qup-i2c19-default-state { pins = "gpio76", "gpio77"; function = "qup19"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts new file mode 100644 index 000000000000..d68765eb6d4f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; + +/ { + model = "Sony Xperia 1 IV"; + compatible = "sony,pdx223", "qcom,sm8450"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + adsp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x2800000>; + no-map; + }; + + video_mem: memory@9fd00000 { + reg = <0x0 0x9fd00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@f3300000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf3300000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x200000>; + console-size = <0x40000>; + record-size = <0x1000>; + ecc-size = <16>; + no-map; + }; + }; + + /* Sadly, the voltages for these GPIO regulators are unknown. */ + imx650_vana_vreg: imx650-vana-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx650_vana_vreg"; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s12>; + + /* + * ARC regulators: + * s5 - gfx.lvl + * l8 - lcx.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + /* + * ARC regulators: + * s2 - mxc.lvl + * s4 - mss.lvl + * s6 - cx.lvl + */ + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + /* + * ARC regulators: + * S2 - ebi.lvl + * S4 - mmcx.lvl + * S6 - mx.lvl + * L1 - lmx.lvl + */ + + pm8450_s3: smps3 { + regulator-name = "pm8450_s3"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <600000>; + }; + + pm8450_l2: ldo2 { + regulator-name = "pm8450_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8450_l3: ldo3 { + regulator-name = "pm8450_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <435000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */ + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c14 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; + + cs35l41_r: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c19 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&pcie0 { + max-link-speed = <2>; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_slpi { + firmware-name = "qcom/slpi.mbn"; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&pm8350c_l9>; + vqmmc-supply = <&pm8350c_l6>; + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0x0>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&spi10 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <28 4>; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 4978c5ba5dd0..d32f08df743d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -438,11 +438,6 @@ no-map; }; - camera_mem: memory@85200000 { - reg = <0x0 0x85200000 0x0 0x500000>; - no-map; - }; - video_mem: memory@85700000 { reg = <0x0 0x85700000 0x0 0x700000>; no-map; @@ -505,6 +500,11 @@ no-map; }; + camera_mem: memory@9f500000 { + reg = <0x0 0x9f500000 0x0 0x800000>; + no-map; + }; + rmtfs_mem: memory@9fd00000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x9fd00000 0x0 0x280000>; @@ -514,6 +514,11 @@ qcom,vmid = <15>; }; + xbl_sc_mem2: memory@a6e00000 { + reg = <0x0 0xa6e00000 0x0 0x40000>; + no-map; + }; + global_sync_mem: memory@a6f00000 { reg = <0x0 0xa6f00000 0x0 0x100000>; no-map; @@ -2379,22 +2384,42 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie0_default_state: pcie0-default-state { - perst { + perst-pins { pins = "gpio94"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio95"; function = "pcie0_clkreqn"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio96"; function = "gpio"; drive-strength = <2>; @@ -2403,21 +2428,21 @@ }; pcie1_default_state: pcie1-default-state { - perst { + perst-pins { pins = "gpio97"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio98"; function = "pcie1_clkreqn"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio99"; function = "gpio"; drive-strength = <2>; @@ -2425,350 +2450,350 @@ }; }; - qup_i2c0_data_clk: qup-i2c0-data-clk { + qup_i2c0_data_clk: qup-i2c0-data-clk-state { pins = "gpio0", "gpio1"; function = "qup0"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk { + qup_i2c1_data_clk: qup-i2c1-data-clk-state { pins = "gpio4", "gpio5"; function = "qup1"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk { + qup_i2c2_data_clk: qup-i2c2-data-clk-state { pins = "gpio8", "gpio9"; function = "qup2"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk { + qup_i2c3_data_clk: qup-i2c3-data-clk-state { pins = "gpio12", "gpio13"; function = "qup3"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk { + qup_i2c4_data_clk: qup-i2c4-data-clk-state { pins = "gpio16", "gpio17"; function = "qup4"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk { + qup_i2c5_data_clk: qup-i2c5-data-clk-state { pins = "gpio206", "gpio207"; function = "qup5"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk { + qup_i2c6_data_clk: qup-i2c6-data-clk-state { pins = "gpio20", "gpio21"; function = "qup6"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk { + qup_i2c8_data_clk: qup-i2c8-data-clk-state { pins = "gpio28", "gpio29"; function = "qup8"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk { + qup_i2c9_data_clk: qup-i2c9-data-clk-state { pins = "gpio32", "gpio33"; function = "qup9"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk { + qup_i2c10_data_clk: qup-i2c10-data-clk-state { pins = "gpio36", "gpio37"; function = "qup10"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk { + qup_i2c11_data_clk: qup-i2c11-data-clk-state { pins = "gpio40", "gpio41"; function = "qup11"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk { + qup_i2c12_data_clk: qup-i2c12-data-clk-state { pins = "gpio44", "gpio45"; function = "qup12"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk { + qup_i2c13_data_clk: qup-i2c13-data-clk-state { pins = "gpio48", "gpio49"; function = "qup13"; drive-strength = <2>; bias-pull-up; }; - qup_i2c14_data_clk: qup-i2c14-data-clk { + qup_i2c14_data_clk: qup-i2c14-data-clk-state { pins = "gpio52", "gpio53"; function = "qup14"; drive-strength = <2>; bias-pull-up; }; - qup_i2c15_data_clk: qup-i2c15-data-clk { + qup_i2c15_data_clk: qup-i2c15-data-clk-state { pins = "gpio56", "gpio57"; function = "qup15"; }; - qup_i2c16_data_clk: qup-i2c16-data-clk { + qup_i2c16_data_clk: qup-i2c16-data-clk-state { pins = "gpio60", "gpio61"; function = "qup16"; }; - qup_i2c17_data_clk: qup-i2c17-data-clk { + qup_i2c17_data_clk: qup-i2c17-data-clk-state { pins = "gpio64", "gpio65"; function = "qup17"; }; - qup_i2c18_data_clk: qup-i2c18-data-clk { + qup_i2c18_data_clk: qup-i2c18-data-clk-state { pins = "gpio68", "gpio69"; function = "qup18"; }; - qup_i2c19_data_clk: qup-i2c19-data-clk { + qup_i2c19_data_clk: qup-i2c19-data-clk-state { pins = "gpio72", "gpio73"; function = "qup19"; }; - qup_i2c20_data_clk: qup-i2c20-data-clk { + qup_i2c20_data_clk: qup-i2c20-data-clk-state { pins = "gpio76", "gpio77"; function = "qup20"; }; - qup_i2c21_data_clk: qup-i2c21-data-clk { + qup_i2c21_data_clk: qup-i2c21-data-clk-state { pins = "gpio80", "gpio81"; function = "qup21"; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-state { pins = "gpio3"; function = "qup0"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup0"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup1"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup1"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-state { pins = "gpio11"; function = "qup2"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup2"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-state { pins = "gpio15"; function = "qup3"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup3"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-state { pins = "gpio19"; function = "qup4"; drive-strength = <6>; bias-disable; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup4"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-state { pins = "gpio85"; function = "qup5"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio206", "gpio207", "gpio84"; function = "qup5"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-state { pins = "gpio23"; function = "qup6"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup6"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-state { pins = "gpio31"; function = "qup8"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup8"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-state { pins = "gpio35"; function = "qup9"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup9"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-state { pins = "gpio39"; function = "qup10"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup10"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-state { pins = "gpio43"; function = "qup11"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup11"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-state { pins = "gpio47"; function = "qup12"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup12"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-state { pins = "gpio51"; function = "qup13"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup13"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-state { pins = "gpio55"; function = "qup14"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup14"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-state { pins = "gpio59"; function = "qup15"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup15"; }; - qup_spi16_cs: qup-spi16-cs { + qup_spi16_cs: qup-spi16-cs-state { pins = "gpio63"; function = "qup16"; }; - qup_spi16_data_clk: qup-spi16-data-clk { + qup_spi16_data_clk: qup-spi16-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup16"; }; - qup_spi17_cs: qup-spi17-cs { + qup_spi17_cs: qup-spi17-cs-state { pins = "gpio67"; function = "qup17"; }; - qup_spi17_data_clk: qup-spi17-data-clk { + qup_spi17_data_clk: qup-spi17-data-clk-state { pins = "gpio64", "gpio65", "gpio66"; function = "qup17"; }; - qup_spi18_cs: qup-spi18-cs { + qup_spi18_cs: qup-spi18-cs-state { pins = "gpio71"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_spi18_data_clk: qup-spi18-data-clk { + qup_spi18_data_clk: qup-spi18-data-clk-state { pins = "gpio68", "gpio69", "gpio70"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_spi19_cs: qup-spi19-cs { + qup_spi19_cs: qup-spi19-cs-state { pins = "gpio75"; function = "qup19"; drive-strength = <6>; bias-disable; }; - qup_spi19_data_clk: qup-spi19-data-clk { + qup_spi19_data_clk: qup-spi19-data-clk-state { pins = "gpio72", "gpio73", "gpio74"; function = "qup19"; drive-strength = <6>; bias-disable; }; - qup_spi20_cs: qup-spi20-cs { + qup_spi20_cs: qup-spi20-cs-state { pins = "gpio79"; function = "qup20"; }; - qup_spi20_data_clk: qup-spi20-data-clk { + qup_spi20_data_clk: qup-spi20-data-clk-state { pins = "gpio76", "gpio77", "gpio78"; function = "qup20"; }; - qup_spi21_cs: qup-spi21-cs { + qup_spi21_cs: qup-spi21-cs-state { pins = "gpio83"; function = "qup21"; }; - qup_spi21_data_clk: qup-spi21-data-clk { + qup_spi21_data_clk: qup-spi21-data-clk-state { pins = "gpio80", "gpio81", "gpio82"; function = "qup21"; }; - qup_uart7_rx: qup-uart7-rx { + qup_uart7_rx: qup-uart7-rx-state { pins = "gpio26"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_uart7_tx: qup-uart7-tx { + qup_uart7_tx: qup-uart7-tx-state { pins = "gpio27"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_uart20_default: qup-uart20-default { + qup_uart20_default: qup-uart20-default-state { pins = "gpio76", "gpio77", "gpio78", "gpio79"; function = "qup20"; }; @@ -3069,7 +3094,9 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d88000 0 0x8000>; + reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -3093,7 +3120,8 @@ "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + "rx_lane1_sync_clk", + "ice_core_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -3102,7 +3130,8 @@ <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; freq-table-hz = <75000000 300000000>, <0 0>, @@ -3111,13 +3140,14 @@ <75000000 300000000>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <75000000 300000000>; status = "disabled"; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8450-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c4>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -3140,6 +3170,45 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4a0 0x0>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; |