diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-10-27 01:24:33 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-10-27 01:24:33 +0300 |
commit | d25f27432f80a800a3592db128254c8140bd71bf (patch) | |
tree | 19f871a1da9e1fc249d0d6b3445afb035febc0fc /arch/arm64 | |
parent | 3906fe9bb7f1a2c8667ae54e967dc8690824f4ea (diff) | |
parent | 05d5da3cb11c91c39e607066d3313a6ce621796a (diff) | |
download | linux-d25f27432f80a800a3592db128254c8140bd71bf.tar.xz |
Merge tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of small fixes for the soc tree:
- Incorrect ethernet phy settings found on i.mx and allwinner
platforms
- a revert for a Qualcomm DT change that caused a boot regression
- four patches for incorrect settings in i.MX DT files
- new MAINTAINER file entries for dhcom boards
- a Kconfig fix for a reset driver that became unselectable
- three more code changes for bugs in reset drivers"
* tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1
Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct
reset: socfpga: add empty driver allowing consumers to probe
reset: tegra-bpmp: Handle errors in BPMP response
reset: pistachio: Re-enable driver selection
reset: brcmstb-rescal: fix incorrect polarity of status bit
ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
Diffstat (limited to 'arch/arm64')
4 files changed, 13 insertions, 8 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 02f8e72f0cad..05486cccee1c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -75,7 +75,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index d17abb515835..e99e7644ff39 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -70,7 +70,9 @@ regulator-name = "rst-usb-eth2"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; }; reg_vdd_5v: regulator-5v { @@ -95,7 +97,7 @@ clocks = <&osc_can>; interrupt-parent = <&gpio4>; interrupts = <28 IRQ_TYPE_EDGE_FALLING>; - spi-max-frequency = <100000>; + spi-max-frequency = <10000000>; vdd-supply = <®_vdd_3v3>; xceiver-supply = <®_vdd_5v>; }; @@ -111,7 +113,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-rxid"; phy-handle = <ðphy>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 9db9b90bf2bc..42bbbb3f532b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -91,10 +91,12 @@ reg_vdd_soc: BUCK1 { regulator-name = "buck1"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <850000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; }; reg_vdd_arm: BUCK2 { @@ -111,7 +113,7 @@ reg_vdd_dram: BUCK3 { regulator-name = "buck3"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; }; @@ -150,7 +152,7 @@ reg_vdd_snvs: LDO2 { regulator-name = "ldo2"; - regulator-min-microvolt = <850000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8c15d9fed08f..d12e4cbfc852 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2590,9 +2590,10 @@ power-domains = <&dispcc MDSS_GDSC>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, <&gcc GCC_DISP_SF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "nrt_bus", "core"; + clock-names = "iface", "bus", "nrt_bus", "core"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; assigned-clock-rates = <460000000>; |