summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-09-11 06:54:48 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-11 06:54:48 +0300
commite90937e756938f03d37d4cae7c82316a3a425944 (patch)
tree0667f5ac6ad368278e9658ba483c79d1a60a65cd /arch/arm
parentae46654bcff303b33facbbd04a3ad9c21d303f9b (diff)
parentb884026a2b80529fc7a4de729b92ee0ba555bfed (diff)
downloadlinux-e90937e756938f03d37d4cae7c82316a3a425944.tar.xz
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/Makefile24
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi3
-rw-r--r--arch/arm/boot/dts/am335x-chiliboard.dts3
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts1
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts525
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts15
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts1
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts35
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts34
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi36
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts17
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revc.dts39
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts11
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi8
-rw-r--r--arch/arm/boot/dts/armada-370.dtsi4
-rw-r--r--arch/arm/boot/dts/armada-375.dtsi4
-rw-r--r--arch/arm/boot/dts/armada-380.dtsi5
-rw-r--r--arch/arm/boot/dts/armada-385-db-ap.dts2
-rw-r--r--arch/arm/boot/dts/armada-385-turris-omnia.dts2
-rw-r--r--arch/arm/boot/dts/armada-385.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-388-clearfog.dts2
-rw-r--r--arch/arm/boot/dts/armada-388-clearfog.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-388-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-388-gp.dts2
-rw-r--r--arch/arm/boot/dts/armada-388-rd.dts2
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi7
-rw-r--r--arch/arm/boot/dts/armada-390-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-395-gp.dts2
-rw-r--r--arch/arm/boot/dts/armada-398-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-39x.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-xp-98dx3236.dtsi3
-rw-r--r--arch/arm/boot/dts/armada-xp-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-gp.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78230.dtsi7
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78260.dtsi11
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78460.dtsi14
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1.dtsi102
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts537
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts39
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi21
-rw-r--r--arch/arm/boot/dts/at91sam9m10g45ek.dts4
-rw-r--r--arch/arm/boot/dts/bcm-cygnus.dtsi149
-rw-r--r--arch/arm/boot/dts/bcm-nsp.dtsi59
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-a-plus.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-a.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-plus.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero-w.dts139
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero.dts6
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm2836-rpi-2-b.dts6
-rw-r--r--arch/arm/boot/dts/bcm2836.dtsi1
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts52
-rw-r--r--arch/arm/boot/dts/bcm2837.dtsi87
-rw-r--r--arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-netgear-r6250.dts3
-rw-r--r--arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts6
-rw-r--r--arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts4
-rw-r--r--arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts5
-rw-r--r--arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts3
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts3
-rw-r--r--arch/arm/boot/dts/bcm47189-tenda-ac9.dts2
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi34
-rw-r--r--arch/arm/boot/dts/bcm53573.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm911360_entphn.dts7
-rw-r--r--arch/arm/boot/dts/bcm947189acdbmr.dts97
-rw-r--r--arch/arm/boot/dts/bcm958522er.dts8
-rw-r--r--arch/arm/boot/dts/bcm958525er.dts8
-rw-r--r--arch/arm/boot/dts/bcm958525xmc.dts8
-rw-r--r--arch/arm/boot/dts/bcm958622hr.dts8
-rw-r--r--arch/arm/boot/dts/bcm958623hr.dts8
-rw-r--r--arch/arm/boot/dts/bcm958625hr.dts8
-rw-r--r--arch/arm/boot/dts/bcm958625k.dts8
-rw-r--r--arch/arm/boot/dts/da850-lego-ev3.dts24
-rw-r--r--arch/arm/boot/dts/dove-d3plug.dts4
-rw-r--r--arch/arm/boot/dts/dove.dtsi8
-rw-r--r--arch/arm/boot/dts/dra7-evm-common.dtsi258
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts277
-rw-r--r--arch/arm/boot/dts/dra7.dtsi36
-rw-r--r--arch/arm/boot/dts/dra71-evm.dts30
-rw-r--r--arch/arm/boot/dts/dra72-evm-common.dtsi7
-rw-r--r--arch/arm/boot/dts/dra72-evm-revc.dts32
-rw-r--r--arch/arm/boot/dts/dra72-evm-tps65917.dtsi2
-rw-r--r--arch/arm/boot/dts/dra72-evm.dts32
-rw-r--r--arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi350
-rw-r--r--arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi647
-rw-r--r--arch/arm/boot/dts/dra76-evm.dts423
-rw-r--r--arch/arm/boot/dts/dra76x.dtsi19
-rw-r--r--arch/arm/boot/dts/exynos3250-artik5-eval.dts1
-rw-r--r--arch/arm/boot/dts/exynos3250-artik5.dtsi1
-rw-r--r--arch/arm/boot/dts/exynos3250-monk.dts1
-rw-r--r--arch/arm/boot/dts/exynos3250-rinato.dts22
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts21
-rw-r--r--arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi1
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi1
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts1
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts22
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-snow-common.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos5250-spring.dts2
-rw-r--r--arch/arm/boot/dts/exynos5260-xyref5260.dts2
-rw-r--r--arch/arm/boot/dts/exynos5410-smdk5410.dts2
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts3
-rw-r--r--arch/arm/boot/dts/exynos5440.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts3
-rw-r--r--arch/arm/boot/dts/gemini-dlink-dir-685.dts246
-rw-r--r--arch/arm/boot/dts/gemini-nas4220b.dts24
-rw-r--r--arch/arm/boot/dts/gemini-rut1xx.dts39
-rw-r--r--arch/arm/boot/dts/gemini-sq201.dts36
-rw-r--r--arch/arm/boot/dts/gemini-wbd111.dts26
-rw-r--r--arch/arm/boot/dts/gemini-wbd222.dts26
-rw-r--r--arch/arm/boot/dts/gemini.dtsi173
-rw-r--r--arch/arm/boot/dts/imx25.dtsi7
-rw-r--r--arch/arm/boot/dts/imx53-cx9020.dts297
-rw-r--r--arch/arm/boot/dts/imx53-pinfunc.h4
-rw-r--r--arch/arm/boot/dts/imx53.dtsi9
-rw-r--r--arch/arm/boot/dts/imx6dl-gw52xx.dts58
-rw-r--r--arch/arm/boot/dts/imx6dl-gw53xx.dts58
-rw-r--r--arch/arm/boot/dts/imx6dl-gw54xx.dts58
-rw-r--r--arch/arm/boot/dts/imx6dl-riotboard.dts45
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-eval.dts278
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts291
-rw-r--r--arch/arm/boot/dts/imx6q-apalis-ixora.dts32
-rw-r--r--arch/arm/boot/dts/imx6q-b850v3.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-bx50v3.dtsi42
-rw-r--r--arch/arm/boot/dts/imx6q-gw52xx.dts58
-rw-r--r--arch/arm/boot/dts/imx6q-gw53xx.dts58
-rw-r--r--arch/arm/boot/dts/imx6q-gw54xx.dts58
-rw-r--r--arch/arm/boot/dts/imx6qdl-apalis.dtsi44
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw51xx.dtsi54
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw52xx.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw53xx.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw54xx.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw553x.dtsi54
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi19
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabrelite.dtsi19
-rw-r--r--arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi112
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dts40
-rw-r--r--arch/arm/boot/dts/imx6ul-geam.dts (renamed from arch/arm/boot/dts/imx6ul-geam.dtsi)74
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot-common.dtsi141
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot-emmc.dts1
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot-nand.dts1
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot.dtsi183
-rw-r--r--arch/arm/boot/dts/imx6ul-liteboard.dts4
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi1
-rw-r--r--arch/arm/boot/dts/imx7-colibri.dtsi9
-rw-r--r--arch/arm/boot/dts/imx7d-sdb.dts93
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi32
-rw-r--r--arch/arm/boot/dts/keystone-k2e-evm.dts18
-rw-r--r--arch/arm/boot/dts/keystone-k2e.dtsi20
-rw-r--r--arch/arm/boot/dts/keystone-k2g-evm.dts71
-rw-r--r--arch/arm/boot/dts/keystone-k2g-ice.dts18
-rw-r--r--arch/arm/boot/dts/keystone-k2g.dtsi204
-rw-r--r--arch/arm/boot/dts/keystone-k2hk-evm.dts53
-rw-r--r--arch/arm/boot/dts/keystone-k2hk.dtsi139
-rw-r--r--arch/arm/boot/dts/keystone-k2l-evm.dts33
-rw-r--r--arch/arm/boot/dts/keystone-k2l.dtsi71
-rw-r--r--arch/arm/boot/dts/kirkwood-6192.dtsi3
-rw-r--r--arch/arm/boot/dts/kirkwood-6281.dtsi3
-rw-r--r--arch/arm/boot/dts/kirkwood-6282.dtsi4
-rw-r--r--arch/arm/boot/dts/kirkwood-98dx4122.dtsi3
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts2
-rw-r--r--arch/arm/boot/dts/meson.dtsi30
-rw-r--r--arch/arm/boot/dts/meson6.dtsi28
-rw-r--r--arch/arm/boot/dts/meson8.dtsi16
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi33
-rw-r--r--arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi1
-rw-r--r--arch/arm/boot/dts/mt2701.dtsi106
-rw-r--r--arch/arm/boot/dts/mt6323.dtsi241
-rw-r--r--arch/arm/boot/dts/mt7623-evb.dts33
-rw-r--r--arch/arm/boot/dts/mt7623.dtsi211
-rw-r--r--arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts487
-rw-r--r--arch/arm/boot/dts/mt7623n-rfb-nand.dts111
-rw-r--r--arch/arm/boot/dts/mt7623n-rfb.dtsi92
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts2
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts2
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3517.dts2
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3730.dts2
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-evm-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts89
-rw-r--r--arch/arm/boot/dts/omap3-overo-base.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-tao3530.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-zoom3.dts2
-rw-r--r--arch/arm/boot/dts/omap3.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3430-sdp.dts2
-rw-r--r--arch/arm/boot/dts/omap4-droid4-xt894.dts42
-rw-r--r--arch/arm/boot/dts/omap4-duovero-parlor.dts2
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap4-sdp-es23plus.dts2
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts2
-rw-r--r--arch/arm/boot/dts/omap4-var-om44customboard.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5-board-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5-cm-t54.dts2
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi29
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi109
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi2
-rw-r--r--arch/arm/boot/dts/r7s72100-genmai.dts71
-rw-r--r--arch/arm/boot/dts/r7s72100-rskrza1.dts61
-rw-r--r--arch/arm/boot/dts/r7s72100.dtsi78
-rw-r--r--arch/arm/boot/dts/r8a7743-iwg20d-q7.dts31
-rw-r--r--arch/arm/boot/dts/r8a7743-iwg20m.dtsi26
-rw-r--r--arch/arm/boot/dts/r8a7743-sk-rzg1m.dts25
-rw-r--r--arch/arm/boot/dts/r8a7743.dtsi301
-rw-r--r--arch/arm/boot/dts/r8a7745-sk-rzg1e.dts25
-rw-r--r--arch/arm/boot/dts/r8a7745.dtsi30
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi30
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts10
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi28
-rw-r--r--arch/arm/boot/dts/r8a7792.dtsi18
-rw-r--r--arch/arm/boot/dts/r8a7793.dtsi18
-rw-r--r--arch/arm/boot/dts/r8a7794.dtsi22
-rw-r--r--arch/arm/boot/dts/rk3036-kylin.dts2
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi3
-rw-r--r--arch/arm/boot/dts/rk3066a-bqcurie2.dts2
-rw-r--r--arch/arm/boot/dts/rk3066a-mk808.dts2
-rw-r--r--arch/arm/boot/dts/rk3066a-rayeager.dts3
-rw-r--r--arch/arm/boot/dts/rk3188-px3-evb.dts2
-rw-r--r--arch/arm/boot/dts/rk3188-radxarock.dts1
-rw-r--r--arch/arm/boot/dts/rk3229-evb.dts129
-rw-r--r--arch/arm/boot/dts/rk3229.dtsi (renamed from arch/arm/boot/dts/imx6ul-geam-kit.dts)104
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi199
-rw-r--r--arch/arm/boot/dts/rk3288-evb.dtsi51
-rw-r--r--arch/arm/boot/dts/rk3288-fennec.dts8
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi3
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload.dts2
-rw-r--r--arch/arm/boot/dts/rk3288-firefly.dtsi5
-rw-r--r--arch/arm/boot/dts/rk3288-miqi.dts4
-rw-r--r--arch/arm/boot/dts/rk3288-phycore-rdk.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-phycore-som.dtsi3
-rw-r--r--arch/arm/boot/dts/rk3288-popmetal.dts4
-rw-r--r--arch/arm/boot/dts/rk3288-r89.dts3
-rw-r--r--arch/arm/boot/dts/rk3288-rock2-som.dtsi3
-rw-r--r--arch/arm/boot/dts/rk3288-rock2-square.dts2
-rw-r--r--arch/arm/boot/dts/rk3288-tinker.dts8
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi1
-rw-r--r--arch/arm/boot/dts/rk3288-veyron.dtsi4
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi215
-rw-r--r--arch/arm/boot/dts/rv1108-evb.dts190
-rw-r--r--arch/arm/boot/dts/rv1108.dtsi369
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi77
-rw-r--r--arch/arm/boot/dts/spear1310.dtsi3
-rw-r--r--arch/arm/boot/dts/spear1340.dtsi1
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi15
-rw-r--r--arch/arm/boot/dts/stm32429i-eval.dts2
-rw-r--r--arch/arm/boot/dts/stm32f429-disco.dts2
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi25
-rw-r--r--arch/arm/boot/dts/stm32f469-disco.dts2
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi51
-rw-r--r--arch/arm/boot/dts/stm32f769-disco.dts6
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi127
-rw-r--r--arch/arm/boot/dts/stm32h743i-eval.dts18
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi6
-rw-r--r--arch/arm/boot/dts/sun7i-a20-cubietruck.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi6
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts85
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts148
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts101
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi176
-rw-r--r--arch/arm/boot/dts/sun8i-h3-beelink-x2.dts22
-rw-r--r--arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts321
-rw-r--r--arch/arm/boot/dts/tegra114-dalmore.dts10
-rw-r--r--arch/arm/boot/dts/tegra124-jetson-tk1.dts12
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi1
-rw-r--r--arch/arm/boot/dts/tegra20-paz00.dts2
-rw-r--r--arch/arm/boot/dts/tegra30-beaver.dts10
-rw-r--r--arch/arm/boot/dts/tps65217.dtsi3
-rw-r--r--arch/arm/boot/dts/uniphier-ld4-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-ld4.dtsi20
-rw-r--r--arch/arm/boot/dts/uniphier-ld6b-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-ld6b.dtsi2
-rw-r--r--arch/arm/boot/dts/uniphier-pinctrl.dtsi58
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-ace.dts2
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-sanji.dts2
-rw-r--r--arch/arm/boot/dts/uniphier-pro4.dtsi20
-rw-r--r--arch/arm/boot/dts/uniphier-pro5.dtsi60
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2-gentil.dts2
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2-vodka.dts2
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2.dtsi22
-rw-r--r--arch/arm/boot/dts/uniphier-sld3-ref.dts75
-rw-r--r--arch/arm/boot/dts/uniphier-sld3.dtsi260
-rw-r--r--arch/arm/boot/dts/uniphier-sld8-ref.dts10
-rw-r--r--arch/arm/boot/dts/uniphier-sld8.dtsi20
-rw-r--r--arch/arm/boot/dts/versatile-pb.dts2
-rw-r--r--arch/arm/boot/dts/zx296702-ad1.dts2
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi8
-rw-r--r--arch/arm/boot/dts/zynq-parallella.dts3
-rw-r--r--arch/arm/boot/dts/zynq-zc702.dts20
-rw-r--r--arch/arm/boot/dts/zynq-zc706.dts20
-rw-r--r--arch/arm/boot/dts/zynq-zed.dts5
-rw-r--r--arch/arm/boot/dts/zynq-zybo.dts5
299 files changed, 12086 insertions, 1600 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7..faf46abaa4a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -46,6 +46,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
+ at91-sama5d27_som1_ek.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
at91-tse850-3.dtb \
@@ -73,7 +74,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
- bcm2835-rpi-zero.dtb
+ bcm2835-rpi-zero.dtb \
+ bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
@@ -106,7 +108,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
@@ -180,6 +183,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
dtb-$(CONFIG_ARCH_GEMINI) += \
+ gemini-dlink-dir-685.dtb \
gemini-nas4220b.dtb \
gemini-rut1xx.dtb \
gemini-sq201.dtb \
@@ -340,6 +344,7 @@ dtb-$(CONFIG_SOC_IMX51) += \
imx51-ts4800.dtb
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
+ imx53-cx9020.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-qsb.dtb \
@@ -391,7 +396,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
+ imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
+ imx6q-apalis-ixora-v1.1.dtb \
imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
imx6q-b450v3.dtb \
@@ -466,7 +473,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-udoo-neo-full.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
- imx6ul-geam-kit.dtb \
+ imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
imx6ul-liteboard.dtb \
@@ -617,6 +624,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-evmsk.dtb \
am335x-icev2.dtb \
am335x-lxm.dtb \
+ am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
am335x-phycore-rdk.dtb \
@@ -650,6 +658,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \
dtb-$(CONFIG_SOC_DRA7XX) += \
am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
+ am57xx-beagle-x15-revc.dtb \
am57xx-cl-som-am57x.dtb \
am57xx-sbc-am57x.dtb \
am572x-idk.dtb \
@@ -657,7 +666,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
dra7-evm.dtb \
dra72-evm.dtb \
dra72-evm-revc.dtb \
- dra71-evm.dtb
+ dra71-evm.dtb \
+ dra76-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-kuroboxpro.dtb \
orion5x-lacie-d2-network.dtb \
@@ -903,6 +913,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
+ sun8i-a83t-bananapi-m3.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
@@ -918,6 +929,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
+ sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-parrot.dtb \
sun8i-v3s-licheepi-zero.dtb \
sun8i-v3s-licheepi-zero-dock.dtb
@@ -970,7 +982,6 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-pro4-sanji.dtb \
uniphier-pxs2-gentil.dtb \
uniphier-pxs2-vodka.dtb \
- uniphier-sld3-ref.dtb \
uniphier-sld8-ref.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
@@ -1049,7 +1060,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
- mt7623-evb.dtb \
+ mt7623n-rfb-nand.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 1d154444dfef..48a15fc641f2 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -319,13 +319,10 @@
ti,pmic-shutdown-controller;
charger {
- interrupts = <0>, <1>;
- interrupt-names = "USB", "AC";
status = "okay";
};
pwrbutton {
- interrupts = <2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index d8769799772e..59431b235944 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -191,13 +191,10 @@
interrupts = <7>; /* NNMI */
charger {
- interrupts = <0>, <1>;
- interrupt-names = "USB", "AC";
status = "okay";
};
pwrbutton {
- interrupts = <2>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 1c37a7c1ea17..ddd897556e03 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -531,6 +531,7 @@
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
new file mode 100644
index 000000000000..f82233cd18e0
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -0,0 +1,525 @@
+/*
+ * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: SZ Lin (林上智) <sz.lin@moxa.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "Moxa UC-8100-ME-T";
+ compatible = "moxa,uc-8100-me-t", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: vmmcsd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "uc8100me:CEL1";
+ gpios = <&gpio_xten 8 0>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "uc8100me:CEL2";
+ gpios = <&gpio_xten 9 0>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "uc8100me:CEL3";
+ gpios = <&gpio_xten 10 0>;
+ default-state = "off";
+ };
+
+ led4 {
+ label = "uc8100me:DIA1";
+ gpios = <&gpio_xten 11 0>;
+ default-state = "off";
+ };
+ led5 {
+ label = "uc8100me:DIA2";
+ gpios = <&gpio_xten 12 0>;
+ default-state = "off";
+ };
+ led6 {
+ label = "uc8100me:DIA3";
+ gpios = <&gpio_xten 13 0>;
+ default-state = "off";
+ };
+ led7 {
+ label = "uc8100me:SD";
+ gpios = <&gpio_xten 14 0>;
+ default-state = "off";
+ };
+ led8 {
+ label = "uc8100me:USB";
+ gpios = <&gpio_xten 15 0>;
+ default-state = "off";
+ };
+ led9 {
+ label = "uc8100me:USER";
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ buttons: push_button {
+ compatible = "gpio-keys";
+ };
+
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&minipcie_pins>;
+
+ minipcie_pins: pinmux_minipcie {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2_24 */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */
+ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/
+ >;
+ };
+
+ push_button_pins: pinmux_push_button {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_ctsn.i2c1_sda */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_rtsn.i2c1_scl */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE6) /* lcd_data14.uart5_ctsn */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data15.uart5_rtsn */
+ AM33XX_IOPAD(0x8c4, PIN_INPUT_PULLUP | MUX_MODE4) /* lcd_data9.uart5_rxd */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE4) /* lcd_data8.uart5_txd */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
+
+ /* Slave 2 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
+
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ mmc0_pins_default: pinmux_mmc0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
+ AM33XX_IOPAD(0x990, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */
+ >;
+ };
+
+ mmc2_pins_default: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ /* eMMC */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */
+ AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ >;
+ };
+
+};
+
+&uart0 {
+ /* Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+ /* UART 1 setting */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart5 {
+ /* UART 2 setting */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm: tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+
+ tps: tps@2d {
+ compatible = "ti,tps65910";
+ reg = <0x2d>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_wdt: rtc_wdt@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+ gpio_xten: gpio_xten@27 {
+ compatible = "nxp,pca9535";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ status = "okay";
+ phy_id = <&davinci_mdio>, <4>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ status = "okay";
+ phy_id = <&davinci_mdio>, <5>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&phy_sel {
+ reg= <0x44e10650 0xf5>;
+ rmii-clock-ext;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-0 = <&mmc0_pins_default>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-0 = <&mmc2_pins_default>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "push_button";
+ linux,code = <0x100>;
+ gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ m25p80@0 {
+ compatible = "mx25l6405d";
+ spi-max-frequency = <40000000>;
+
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reg : The partition's offset and size within the mtd bank. */
+ partitions@0 {
+ label = "MLO";
+ reg = <0x0 0x80000>;
+ };
+
+ partitions@1 {
+ label = "U-Boot";
+ reg = <0x80000 0x100000>;
+ };
+
+ partitions@2 {
+ label = "U-Boot Env";
+ reg = <0x180000 0x20000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 29a538ecd405..afb8eb0a0a16 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -149,6 +149,13 @@
system-clock-frequency = <12000000>;
};
};
+
+ beeper: beeper {
+ compatible = "gpio-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&beeper_pins>;
+ gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ };
};
&am43xx_pinmux {
@@ -510,6 +517,13 @@
AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
+
+ beeper_pins: beeper_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */
+ >;
+ };
+
};
&uart0 {
@@ -842,6 +856,7 @@
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 54f40f370011..9d276af7c539 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -564,6 +564,7 @@
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 7b207835b2d1..debf9464403e 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -11,6 +11,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI AM5718 IDK";
@@ -64,13 +65,6 @@
};
};
-&mmc1 {
- status = "okay";
- vmmc-supply = <&ldo1_reg>;
- bus-width = <4>;
- cd-gpios = <&gpio6 27 0>; /* gpio 219 */
-};
-
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
@@ -96,3 +90,30 @@
status = "okay";
};
};
+
+&pcie1_rc {
+ status = "okay";
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 9da6d83ca185..a578fe97ba3b 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -12,6 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
/ {
model = "TI AM5728 IDK";
@@ -67,6 +68,24 @@
};
};
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
+
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
@@ -76,19 +95,16 @@
vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};
-&mmc1 {
- status = "okay";
- vmmc-supply = <&v3_3d>;
- vmmc_aux-supply = <&ldo1_reg>;
- bus-width = <4>;
- cd-gpios = <&gpio6 27 0>; /* gpio 219 */
-};
-
&sn65hvs882 {
load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
};
-&pcie1 {
+&pcie1_rc {
+ status = "okay";
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index fdfe5b16b806..49aeecd312b4 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -9,6 +9,7 @@
#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -166,34 +167,6 @@
};
};
-&dra7_pmx_core {
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
-
- mmc2_pins_default: mmc2_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
- >;
- };
-};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -570,7 +543,12 @@
};
};
-&pcie1 {
+&pcie1_rc {
+ status = "ok";
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_ep {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
index 39a92aff0a0d..5a77b334923d 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -19,8 +19,23 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
vmmc-supply = <&vdd_3v3>;
- vmmc-aux-supply = <&ldo1_reg>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
};
/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
new file mode 100644
index 000000000000..17c41da3b55f
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
+ <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 19a60a11c198..d6689106d2a8 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -20,9 +20,20 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+
vmmc-supply = <&ldo1_reg>;
};
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
&phy1 {
max-speed = <100>;
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index c536b2f5389f..97aa8e6a56da 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -399,6 +399,14 @@
dr_mode = "peripheral";
};
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&v3_3d>;
+ vqmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
&mmc2 {
status = "okay";
vmmc-supply = <&v3_3d>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index f9cf1273f35e..b1cf5a26f3c2 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -72,7 +72,7 @@
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -100,6 +100,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
@@ -117,6 +118,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 50c5e8417802..7225c7ce9a8d 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -582,7 +582,7 @@
};
};
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -610,6 +610,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
@@ -627,6 +628,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index e392f6036f39..132596fd0860 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -71,7 +71,7 @@
};
};
- pcie-controller {
+ pcie {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -104,6 +104,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
@@ -122,6 +123,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
@@ -140,6 +142,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index db5b9f6b615d..25d2d720dc0e 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -209,7 +209,7 @@
status = "okay";
};
- pcie-controller {
+ pcie {
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index be16ce39fb3d..06831e1e3f80 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -96,7 +96,7 @@
};
};
- pcie-controller {
+ pcie {
status = "okay";
pcie@1,0 {
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index 7fcc4c4885cf..74863aff01c6 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -70,7 +70,7 @@
};
soc {
- pciec: pcie-controller {
+ pciec: pcie {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -109,6 +109,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
@@ -127,6 +128,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
@@ -145,6 +147,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
@@ -166,6 +169,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <3>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 0d5f1f062275..ee7b0089eff0 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -62,7 +62,7 @@
};
};
- pcie-controller {
+ pcie {
pcie@3,0 {
/* Port 2, Lane 0. CON2, nearest CPU. */
reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 0f5938bede53..68acfc968706 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -104,7 +104,7 @@
};
};
- pcie-controller {
+ pcie {
status = "okay";
/*
* The two PCIe units are accessible through
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 1ac923826445..a4ec1fa37529 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -172,7 +172,7 @@
status = "okay";
};
- pcie-controller {
+ pcie {
status = "okay";
/*
* The two PCIe units are accessible through
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 563901e0ec07..f503955dbd3b 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -240,7 +240,7 @@
status = "okay";
};
- pcie-controller {
+ pcie {
status = "okay";
/*
* One PCIe units is accessible through
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index af82f275eac2..9cc3ca0376b9 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -117,7 +117,7 @@
};
};
- pcie-controller {
+ pcie {
status = "okay";
/*
* One PCIe units is accessible through
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index af31f5d6c0e5..7ff0811e61db 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -154,6 +154,13 @@
reg = <0xc000 0x58>;
};
+ timer@c200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xc200 0x20>;
+ interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+ clocks = <&coreclk 2>;
+ };
+
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
index 2afed2ce4741..c718a5242595 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -123,7 +123,7 @@
};
};
- pcie-controller {
+ pcie {
status = "okay";
/* CON30 */
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
index 2cdbba804c1e..ef491b524fd6 100644
--- a/arch/arm/boot/dts/armada-395-gp.dts
+++ b/arch/arm/boot/dts/armada-395-gp.dts
@@ -139,7 +139,7 @@
};
};
- pcie-controller {
+ pcie {
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index e8604281c3c9..f0e0379f7619 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -118,7 +118,7 @@
};
};
- pcie-controller {
+ pcie {
status = "okay";
pcie@1,0 {
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index 60fbfd5907c7..ea657071e278 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -442,7 +442,7 @@
};
};
- pcie-controller {
+ pcie {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -481,6 +481,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
@@ -499,6 +500,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
@@ -517,6 +519,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
@@ -538,6 +541,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <3>;
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index be22ec5236ac..bdd4c7a45fbf 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -91,7 +91,7 @@
/*
* 98DX3236 has 1 x1 PCIe unit Gen2.0
*/
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -116,6 +116,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index a33974254d8c..065282c21789 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -242,7 +242,7 @@
/* Port 2, Lane 0 */
status = "okay";
};
- pcie@10,0 {
+ pcie@a,0 {
/* Port 3, Lane 0 */
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index d62bf7bea1df..ac9eab8ac186 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -227,7 +227,7 @@
/* Port 2, Lane 0 */
status = "okay";
};
- pcie@10,0 {
+ pcie@a,0 {
/* Port 3, Lane 0 */
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 9f25814077f2..129738f7973d 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x1 only.
*/
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -123,6 +123,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
@@ -140,6 +141,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@@ -157,6 +159,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
@@ -174,6 +177,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
@@ -191,6 +195,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2bfe07aebf1a..e58d597e37b9 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
* configured as x4 or quad x1 lanes. One unit is
* x4 only.
*/
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -138,6 +138,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
@@ -155,6 +156,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@@ -172,6 +174,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
@@ -189,6 +192,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
@@ -206,6 +210,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
@@ -223,6 +228,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
@@ -240,6 +246,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
@@ -257,6 +264,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
@@ -274,6 +282,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 6c33935f7074..a5c961cee7de 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
@@ -159,6 +159,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
@@ -176,6 +177,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@@ -193,6 +195,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
@@ -210,6 +213,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
@@ -227,6 +231,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
@@ -244,6 +249,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
@@ -261,6 +267,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
@@ -278,6 +285,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
@@ -295,6 +303,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
@@ -303,7 +312,7 @@
status = "disabled";
};
- pcie10: pcie@10,0 {
+ pcie10: pcie@a,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
@@ -312,6 +321,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
0x81000000 0 0 0x81000000 0xa 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 8a04c7e2d818..22b958537d31 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -26,7 +26,7 @@
fmc: flash-controller@1e620000 {
reg = < 0x1e620000 0x94
- 0x20000000 0x02000000 >;
+ 0x20000000 0x10000000 >;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-fmc";
@@ -41,7 +41,7 @@
spi: flash-controller@1e630000 {
reg = < 0x1e630000 0x18
- 0x30000000 0x02000000 >;
+ 0x30000000 0x10000000 >;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-spi";
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
new file mode 100644
index 000000000000..63a5af898165
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -0,0 +1,102 @@
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ * Copyright (c) 2017, Microchip Technology Inc.
+ * 2017 Cristian Birsan <cristian.birsan@microchip.com>
+ * 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+ model = "Atmel SAMA5D27 SoM1";
+ compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ macb0: ethernet@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_default>;
+ phy-mode = "rmii";
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ };
+ };
+
+ pinctrl@fc038000 {
+
+ pinctrl_macb0_default: macb0_default {
+ pinmux = <PIN_PD9__GTXCK>,
+ <PIN_PD10__GTXEN>,
+ <PIN_PD11__GRXDV>,
+ <PIN_PD12__GRXER>,
+ <PIN_PD13__GRX0>,
+ <PIN_PD14__GRX1>,
+ <PIN_PD15__GTX0>,
+ <PIN_PD16__GTX1>,
+ <PIN_PD17__GMDC>,
+ <PIN_PD18__GMDIO>;
+ bias-disable;
+ };
+
+ pinctrl_macb0_phy_irq: macb0_phy_irq {
+ pinmux = <PIN_PD31__GPIO>;
+ bias-disable;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
new file mode 100644
index 000000000000..9c9088c99cc4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,537 @@
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ * Copyright (c) 2017, Microchip Technology Inc.
+ * 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ * 2017 Cristian Birsan <cristian.birsan@microchip.com>
+ * 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91-sama5d27_som1.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Atmel SAMA5D27 SOM1 EK";
+ compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ahb {
+ usb0: gadget@00300000 {
+ atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00400000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+ };
+
+ usb2: ehci@00500000 {
+ status = "okay";
+ };
+
+ sdmmc0: sdio-host@a0000000 {
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ status = "okay";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
+ status = "okay";
+ };
+
+ apb {
+ isc: isc@f0008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+ status = "okay";
+ };
+
+ spi0: spi@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ status = "okay";
+ };
+
+ macb0: ethernet@f8008000 {
+ status = "okay";
+ };
+
+ uart1: serial@f8020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+
+ uart2: serial@f8024000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+ atmel,use-dma-rx;
+ atmel-use-dma-tx;
+ status = "okay";
+ };
+
+ pwm0: pwm@f802c000 {
+ status = "okay";
+ };
+
+ flx1: flexcom@f8038000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "disabled";
+
+ i2c2: i2c@600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <0>, <0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx1_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ shdwc@f8048010 {
+ atmel,shdwc-debouncer = <976>;
+ atmel,wakeup-rtc-timer;
+
+ input@0 {
+ reg = <0>;
+ atmel,wakeup-type = "low";
+ };
+ };
+
+ watchdog@f8048040 {
+ status = "okay";
+ };
+
+ can0: can@f8054000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
+ };
+
+ uart3: serial@fc008000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_default>;
+ status = "disabled";
+ };
+
+ uart4: serial@fc00c000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-name = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+ status = "okay";
+ };
+
+ flx3: flexcom@fc014000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "disabled";
+
+ uart7: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx3_clk>;
+ clock-names = "usart";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx3_default>;
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+
+ spi2: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx3_clk>;
+ clock-names = "spi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx3_default>;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx4: flexcom@fc018000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "okay";
+
+ uart6: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx4_clk>;
+ clock-names = "usart";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+
+ spi3: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx4_clk>;
+ clock-names = "spi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+ atmel,fifo-size = <16>;
+ status = "okay";
+ };
+
+ i2c3: i2c@600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <0>, <0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx4_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ i2c1: i2c@fc028000 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ status = "okay";
+ };
+
+ pinctrl@fc038000 {
+
+ pinctrl_can0_default: can0_default {
+ pinmux = <PIN_PC10__CANTX0>,
+ <PIN_PC11__CANRX0>;
+ bias-disable;
+ };
+
+ pinctrl_can1_default: can1_default {
+ pinmux = <PIN_PC26__CANTX1>,
+ <PIN_PC27__CANRX1>;
+ bias-disable;
+ };
+
+ pinctrl_flx3_default: flx3_default {
+ pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+ <PIN_PC19__FLEXCOM3_IO1>,
+ <PIN_PC18__FLEXCOM3_IO2>,
+ <PIN_PC21__FLEXCOM3_IO3>,
+ <PIN_PC22__FLEXCOM3_IO4>;
+ bias-disable;
+ };
+
+ pinctrl_i2c1_default: i2c1_default {
+ pinmux = <PIN_PD4__TWD1>,
+ <PIN_PD5__TWCK1>;
+ bias-disable;
+ };
+
+ pinctrl_isc_base: isc_base {
+ pinmux = <PIN_PC21__ISC_PCK>,
+ <PIN_PC22__ISC_VSYNC>,
+ <PIN_PC23__ISC_HSYNC>,
+ <PIN_PC24__ISC_MCK>;
+ bias-disable;
+ };
+
+ pinctrl_isc_data_8bit: isc_data_8bit {
+ pinmux = <PIN_PC20__ISC_D11>,
+ <PIN_PC19__ISC_D10>,
+ <PIN_PC18__ISC_D9>,
+ <PIN_PC17__ISC_D8>,
+ <PIN_PC16__ISC_D7>,
+ <PIN_PC15__ISC_D6>,
+ <PIN_PC14__ISC_D5>,
+ <PIN_PC13__ISC_D4>;
+ bias-disable;
+ };
+
+ pinctrl_isc_data_9_10: isc_data_9_10 {
+ pinmux = <PIN_PC12__ISC_D3>,
+ <PIN_PC11__ISC_D2>;
+ bias-disable;
+ };
+
+ pinctrl_isc_data_11_12: isc_data_11_12 {
+ pinmux = <PIN_PC10__ISC_D1>,
+ <PIN_PC9__ISC_D0>;
+ bias-disable;
+ };
+
+ pinctrl_key_gpio_default: key_gpio_default {
+ pinmux = <PIN_PA29__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PA27__GPIO>,
+ <PIN_PB1__GPIO>,
+ <PIN_PA31__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_sdmmc0_default: sdmmc0_default {
+ cmd_data {
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
+ <PIN_PA2__SDMMC0_DAT0>,
+ <PIN_PA3__SDMMC0_DAT1>,
+ <PIN_PA4__SDMMC0_DAT2>,
+ <PIN_PA5__SDMMC0_DAT3>,
+ <PIN_PA6__SDMMC0_DAT4>,
+ <PIN_PA7__SDMMC0_DAT5>,
+ <PIN_PA8__SDMMC0_DAT6>,
+ <PIN_PA9__SDMMC0_DAT7>;
+ bias-pull-up;
+ };
+
+ ck_cd_vddsel {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA11__SDMMC0_VDDSEL>,
+ <PIN_PA13__SDMMC0_CD>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ conf-ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_spi0_default: spi0_default {
+ pinmux = <PIN_PA14__SPI0_SPCK>,
+ <PIN_PA15__SPI0_MOSI>,
+ <PIN_PA16__SPI0_MISO>,
+ <PIN_PA17__SPI0_NPCS0>;
+ bias-disable;
+ };
+
+ pinctrl_uart1_default: uart1_default {
+ pinmux = <PIN_PD2__URXD1>,
+ <PIN_PD3__UTXD1>;
+ bias-disable;
+ };
+
+ pinctrl_uart3_default: uart3_default {
+ pinmux = <PIN_PC12__URXD3>,
+ <PIN_PC13__UTXD3>;
+ bias-disable;
+ };
+
+ pinctrl_usb_default: usb_default {
+ pinmux = <PIN_PA10__GPIO>,
+ <PIN_PD19__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ pinmux = <PIN_PD20__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_an: mikrobus1_an {
+ pinmux = <PIN_PD25__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_an: mikrobus2_an {
+ pinmux = <PIN_PD26__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_rst: mikrobus1_rst {
+ pinmux = <PIN_PB2__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_rst: mikrobus2_rst {
+ pinmux = <PIN_PA26__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+ pinmux = <PIN_PD0__FLEXCOM4_IO4>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+ pinmux = <PIN_PC31__FLEXCOM4_IO3>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus_spi: mikrobus_spi {
+ pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+ <PIN_PC29__FLEXCOM4_IO1>,
+ <PIN_PC30__FLEXCOM4_IO2>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+ pinmux = <PIN_PB1__PWML1>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+ pinmux = <PIN_PA31__PWML0>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_int: mikrobus1_int {
+ pinmux = <PIN_PB0__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_int: mikrobus2_int {
+ pinmux = <PIN_PA25__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_uart: mikrobus1_uart {
+ pinmux = <PIN_PB3__URXD4>,
+ <PIN_PB4__UTXD4>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_uart: mikrobus2_uart {
+ pinmux = <PIN_PD23__URXD2>,
+ <PIN_PD24__UTXD2>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus_i2c: mikrobus1_i2c {
+ pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+ <PIN_PA23__FLEXCOM1_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_flx4_default: flx4_uart_default {
+ pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+ <PIN_PC29__FLEXCOM4_IO1>,
+ <PIN_PC30__FLEXCOM4_IO2>,
+ <PIN_PC31__FLEXCOM4_IO3>,
+ <PIN_PD0__FLEXCOM4_IO4>;
+ bias-disable;
+ };
+ };
+
+ can1: can@fc050000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+ pb4 {
+ label = "USER";
+ gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_gpio_default>;
+ status = "okay";
+
+ red {
+ label = "red";
+ gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
+ };
+
+ green {
+ label = "green";
+ gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
+ };
+
+ blue {
+ label = "blue";
+ gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 2e2c3d1a1fa2..c7e9ccf2bc87 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -68,7 +68,7 @@
ahb {
usb0: gadget@00300000 {
- atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@@ -76,8 +76,8 @@
usb1: ohci@00400000 {
num-ports = <3>;
- atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
- &pioA 42 GPIO_ACTIVE_HIGH
+ atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+ &pioA PIN_PB10 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
@@ -127,7 +127,7 @@
ethernet-phy@1 {
reg = <0x1>;
interrupt-parent = <&pioA>;
- interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -160,9 +160,9 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
@@ -355,6 +355,14 @@
bias-pull-up;
};
+ pinctrl_classd_default: classd_default {
+ pinmux = <PIN_PB1__CLASSD_R0>,
+ <PIN_PB2__CLASSD_R1>,
+ <PIN_PB3__CLASSD_R2>,
+ <PIN_PB4__CLASSD_R3>;
+ bias-pull-up;
+ };
+
pinctrl_flx0_default: flx0_default {
pinmux = <PIN_PB28__FLEXCOM0_IO0>,
<PIN_PB29__FLEXCOM0_IO1>;
@@ -488,6 +496,14 @@
};
+ classd: classd@fc048000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_classd_default>;
+ atmel,pwm-type = "diff";
+ atmel,non-overlap-time = <10>;
+ status = "okay";
+ };
+
can1: can@fc050000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_default>;
@@ -504,7 +520,7 @@
bp1 {
label = "PB_USER";
- gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
};
};
@@ -517,17 +533,18 @@
red {
label = "red";
- gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
};
+
green {
label = "green";
- gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
};
blue {
label = "blue";
- gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index a4808c4fbc05..64fa3f9a39d3 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -455,6 +455,16 @@
>;
/* shared pinctrl settings */
+ ac97 {
+ pinctrl_ac97: ac97-0 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97RX */
+ AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97TX */
+ AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97FS */
+ AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* AC97CK */
+ };
+ };
+
adc0 {
pinctrl_adc0_adtrg: adc0_adtrg {
atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -1043,6 +1053,17 @@
status = "disabled";
};
+ ac97: sound@fffac000 {
+ compatible = "atmel,at91sam9263-ac97c";
+ reg = <0xfffac000 0x4000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ac97>;
+ clocks = <&ac97_clk>;
+ clock-names = "ac97_clk";
+ status = "disabled";
+ };
+
adc0: adc@fffb0000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 2522c3308305..94c52c555f83 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -166,6 +166,10 @@
status = "okay";
};
+ ac97: sound@fffac000 {
+ status = "okay";
+ };
+
adc0: adc@fffb0000 {
pinctrl-names = "default";
pinctrl-0 = <
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index bf8c83815753..7c957ea06c66 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -55,6 +55,11 @@
/include/ "bcm-cygnus-clock.dtsi"
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
core {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x1000000>;
@@ -119,6 +124,21 @@
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
<0x0301d24c 0x2c>;
+
+ spi_0: spi_0 {
+ function = "spi0";
+ groups = "spi0_grp";
+ };
+
+ spi_1: spi_1 {
+ function = "spi1";
+ groups = "spi1_grp";
+ };
+
+ spi_2: spi_2 {
+ function = "spi2";
+ groups = "spi2_grp";
+ };
};
mailbox: mailbox@03024024 {
@@ -300,6 +320,23 @@
};
};
+ dma0: dma@18018000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x18018000 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
uart0: serial@18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
@@ -324,7 +361,7 @@
uart2: serial@18022000 {
compatible = "snps,dw-apb-uart";
- reg = <0x18020000 0x100>;
+ reg = <0x18022000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -344,6 +381,52 @@
status = "disabled";
};
+ spi0: spi@18028000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x18028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi_0>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ spi1: spi@18029000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x18029000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi_1>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ spi2: spi@1802a000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1802a000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi_2>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ sdhci0: sdhci@18041000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x18041000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+ bus-width = <4>;
+ sdhci,auto-cmd12;
+ status = "disabled";
+ };
+
eth0: ethernet@18042000 {
compatible = "brcm,amac";
reg = <0x18042000 0x1000>,
@@ -353,6 +436,16 @@
status = "disabled";
};
+ sdhci1: sdhci@18043000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x18043000 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+ bus-width = <4>;
+ sdhci,auto-cmd12;
+ status = "disabled";
+ };
+
nand: nand@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
@@ -366,6 +459,33 @@
brcm,nand-has-wp;
};
+ ehci0: usb@18048000 {
+ compatible = "generic-ehci";
+ reg = <0x18048000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci0: usb@18048800 {
+ compatible = "generic-ohci";
+ reg = <0x18048800 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ v3d: v3d@180a2000 {
+ compatible = "brcm,cygnus-v3d";
+ reg = <0x180a2000 0x1000>;
+ clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+ clock-names = "v3d_clk";
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vc4: gpu {
+ compatible = "brcm,cygnus-vc4";
+ };
+
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
@@ -444,19 +564,6 @@
status = "disabled";
};
- v3d: v3d@180a2000 {
- compatible = "brcm,cygnus-v3d";
- reg = <0x180a2000 0x1000>;
- clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
- clock-names = "v3d_clk";
- interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- vc4: gpu {
- compatible = "brcm,cygnus-vc4";
- };
-
adc: adc@180a6000 {
compatible = "brcm,iproc-static-adc";
#io-channel-cells = <1>;
@@ -467,5 +574,19 @@
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ keypad: keypad@180ac000 {
+ compatible = "brcm,bcm-keypad";
+ reg = <0x180ac000 0x14c>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+ clock-names = "peri_clk";
+ clock-frequency = <31250>;
+ pull-up-enabled;
+ col-debounce-filter-period = <0>;
+ status-debounce-filter-period = <0>;
+ row-output-enabled;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7204d1def23d..dff66974feed 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -215,6 +215,7 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
sdhci,auto-cmd12;
clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+ dma-coherent;
status = "disabled";
};
@@ -224,6 +225,7 @@
<0x110000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
status = "disabled";
};
@@ -233,6 +235,7 @@
<0x111000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
status = "disabled";
};
@@ -242,6 +245,7 @@
<0x112000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
status = "disabled";
};
@@ -252,6 +256,7 @@
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
+ dma-coherent;
};
nand: nand@26000 {
@@ -297,6 +302,32 @@
#size-cells = <0>;
};
+ xhci: usb@29000 {
+ compatible = "generic-xhci";
+ reg = <0x29000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>;
+ phy-names = "usb3-phy";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ ehci0: usb@2a000 {
+ compatible = "generic-ehci";
+ reg = <0x2a000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ ohci0: usb@2b000 {
+ compatible = "generic-ohci";
+ reg = <0x2b000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ status = "disabled";
+ };
+
crypto@2f000 {
compatible = "brcm,spum-nsp-crypto";
reg = <0x2f000 0x900>;
@@ -321,20 +352,6 @@
status = "disabled";
};
- ehci0: usb@2a000 {
- compatible = "generic-ehci";
- reg = <0x2a000 0x100>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ohci0: usb@2b000 {
- compatible = "generic-ohci";
- reg = <0x2b000 0x100>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
rng: rng@33000 {
compatible = "brcm,bcm-nsp-rng";
reg = <0x33000 0x14>;
@@ -376,6 +393,7 @@
#size-cells = <0>;
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
+ dma-coherent;
status = "disabled";
};
@@ -446,6 +464,7 @@
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ dma-coherent;
status = "disabled";
sata0: sata-port@0 {
@@ -460,6 +479,15 @@
phy-names = "sata-phy";
};
};
+
+ usb3_phy: usb3-phy@104000 {
+ compatible = "brcm,ns-bx-usb3-phy";
+ reg = <0x104000 0x1000>,
+ <0x032000 0x1000>;
+ reg-names = "dmp", "ccb-mii";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
pcie0: pcie@18012000 {
@@ -483,6 +511,7 @@
*/
ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+ dma-coherent;
status = "disabled";
msi-parent = <&msi0>;
@@ -519,6 +548,7 @@
*/
ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+ dma-coherent;
status = "disabled";
msi-parent = <&msi1>;
@@ -555,6 +585,7 @@
*/
ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+ dma-coherent;
status = "disabled";
msi-parent = <&msi2>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index d0704540db6b..9f866491efdf 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -99,3 +99,9 @@
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 46d078e29017..4b1af06c8dc0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -94,3 +94,9 @@
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 432088ebb0a1..a846f1e781d8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -101,3 +101,9 @@
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 4133bc2cd9be..e860964e39fa 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -94,3 +94,9 @@
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 4d56fe3006b0..5d77f3f8c4c5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -89,3 +89,9 @@
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
new file mode 100644
index 000000000000..82651c3eb682
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+ model = "Raspberry Pi Zero W";
+
+ /* Needed by firmware to properly init UARTs */
+ aliases {
+ uart0 = "/soc/serial@7e201000";
+ uart1 = "/soc/serial@7e215040";
+ serial0 = "/soc/serial@7e201000";
+ serial1 = "/soc/serial@7e215040";
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl_on>;
+ reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gpio {
+ /*
+ * This is based on the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "GPIO0",
+ "GPIO1",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD0",
+ "RXD0",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "SDA0",
+ "SCL0",
+ "NC", /* GPIO30 */
+ "NC", /* GPIO31 */
+ "NC", /* GPIO32 */
+ "NC", /* GPIO33 */
+ "NC", /* GPIO34 */
+ "NC", /* GPIO35 */
+ "NC", /* GPIO36 */
+ "NC", /* GPIO37 */
+ "NC", /* GPIO38 */
+ "NC", /* GPIO39 */
+ "CAM_GPIO1", /* GPIO40 */
+ "WL_ON", /* GPIO41 */
+ "NC", /* GPIO42 */
+ "WIFI_CLK", /* GPIO43 */
+ "CAM_GPIO0", /* GPIO44 */
+ "BT_ON", /* GPIO45 */
+ "HDMI_HPD_N",
+ "STATUS_LED_N",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0>;
+
+ wl_on: wl-on {
+ brcm,pins = <41>;
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 79a20d520931..70362405c595 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -103,3 +103,9 @@
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index e55b362b9d6e..e36c392a2b8f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -39,7 +39,7 @@
};
alt0: alt0 {
- brcm,pins = <4 5 7 8 9 10 11 14 15>;
+ brcm,pins = <4 5 7 8 9 10 11>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index bf19e8cfb9e6..e8de41444b68 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -39,3 +39,9 @@
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index da3deeb42592..2c26d0be8b03 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -36,6 +36,7 @@
cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "brcm,bcm2836-smp";
v7_cpu0: cpu@0 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index c72a27d908b6..20725ca487f3 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -1 +1,51 @@
-#include "arm64/broadcom/bcm2837-rpi-3-b.dts"
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B";
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 47 0>;
+ };
+ };
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
+ status = "okay";
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_gpio14>;
+ status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
new file mode 100644
index 000000000000..bc1cca5cf43c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -0,0 +1,87 @@
+#include "bcm283x.dtsi"
+
+/ {
+ compatible = "brcm,bcm2837";
+
+ soc {
+ ranges = <0x7e000000 0x3f000000 0x1000000>,
+ <0x40000000 0x40000000 0x00001000>;
+ dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+ local_intc: local_intc {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&local_intc>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&local_intc>;
+ interrupts = <0>, // PHYS_SECURE_PPI
+ <1>, // PHYS_NONSECURE_PPI
+ <3>, // VIRT_PPI
+ <2>; // HYP_PPI
+ always-on;
+ };
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000d8>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000e0>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000e8>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000f0>;
+ };
+ };
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
+};
+
+&cpu_thermal {
+ coefficients = <(-538) 412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+ compatible = "brcm,bcm2837-thermal";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 62e1427b3f10..8b64caabaad8 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -52,6 +52,10 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>, <&ohci_port2>,
+ <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
power0 {
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index a5647efe4118..d7c34fa72b4b 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -48,6 +48,9 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
wireless {
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 19ee924d7d53..83a4c60bb431 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -42,16 +42,22 @@
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
usb3-green {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
wps {
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index a854a5174b7f..3ed8de42cb48 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -36,6 +36,8 @@
usb2-port1 {
label = "bcm53xx:green:usb2-port1";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
power {
@@ -67,6 +69,8 @@
usb2-port2 {
label = "bcm53xx:green:usb2-port2";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index 97aa5d59a1d8..ec4a50e440f6 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -46,11 +46,16 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
wan-blue {
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 51b0641b5f79..7cc7d344fe5b 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -71,6 +71,9 @@
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
2ghz {
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index 5f8621d00c50..bc1d1e10d4ac 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -59,6 +59,9 @@
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
status {
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 34417dac1cd0..19e61b5b066c 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -26,6 +26,8 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
wps {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 98647d22b291..045b9bb857f9 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -272,6 +272,19 @@
reg = <0x00021000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
};
ohci: ohci@22000 {
@@ -280,6 +293,19 @@
compatible = "generic-ohci";
reg = <0x00022000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
};
};
@@ -300,6 +326,14 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy>;
phy-names = "usb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xhci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index eae623f76401..c698a565b8ae 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -138,10 +138,12 @@
ehci_port1: port@1 {
reg = <1>;
+ #trigger-source-cells = <0>;
};
ehci_port2: port@2 {
reg = <2>;
+ #trigger-source-cells = <0>;
};
};
@@ -158,10 +160,12 @@
ohci_port1: port@1 {
reg = <1>;
+ #trigger-source-cells = <0>;
};
ohci_port2: port@2 {
reg = <2>;
+ #trigger-source-cells = <0>;
};
};
};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 000f5f19215e..53f990defd6a 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -39,9 +39,12 @@
model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
compatible = "brcm,bcm11360", "brcm,cygnus";
+ aliases {
+ serial0 = &uart3;
+ };
+
chosen {
- stdout-path = &uart3;
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
gpio_keys {
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
new file mode 100644
index 000000000000..ef263412fea5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Broadcom BCM947189ACDBMR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 21 0>;
+ gpio-miso = <&chipcommon 22 0>;
+ gpio-mosi = <&chipcommon 23 0>;
+ cs-gpios = <&chipcommon 24 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External BCM6802 MoCA chip is connected */
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index f5c42962c201..f9dd342cc2ae 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -170,3 +170,11 @@
&uart0 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index efcb1f67bdad..374508a9cfbf 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -182,3 +182,11 @@
&uart0 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index b335ce02e32f..403250c5ad8e 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -202,3 +202,11 @@
&uart0 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 16ab2d82a14b..fd8b8c689ffe 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -219,3 +219,11 @@
&uart0 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 9b921c6aa8f8..3bc50849d013 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -227,3 +227,11 @@
&uart0 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 006b08e41a3b..d94d14b3c745 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -229,3 +229,11 @@
&uart0 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 64740f85cf4c..2cf2392483b2 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -264,3 +264,11 @@
&uart1 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 45983c04a8a7..413dbd5d9f64 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -249,6 +249,15 @@
0x4c 0x00000080 0x000000f0
>;
};
+
+ ev3_lcd_pins: pinmux_lcd {
+ pinctrl-single,bits = <
+ /* SIMO, GP2[11], GP2[12], CLK */
+ 0x14 0x00188100 0x00ffff00
+ /* GP5[0] */
+ 0x30 0x80000000 0xf0000000
+ >;
+ };
};
&pinconf {
@@ -357,6 +366,21 @@
};
};
+&spi1 {
+ status = "okay";
+ pinctrl-0 = <&ev3_lcd_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+
+ display@0{
+ compatible = "lego,ev3-lcd";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&ehrpwm0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
index f5f59bb5a534..e88ff83f1dec 100644
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -88,7 +88,7 @@
&pcie {
status = "okay";
/* Fresco Logic USB3.0 xHCI controller */
- pcie-port@0 {
+ pcie@1 {
status = "okay";
reset-gpios = <&gpio0 26 1>;
reset-delay-us = <20000>;
@@ -96,7 +96,7 @@
pinctrl-names = "default";
};
/* Mini-PCIe slot */
- pcie-port@1 {
+ pcie@2 {
status = "okay";
reset-gpios = <&gpio0 25 1>;
};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 698d58cea20d..1475d3672e56 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -89,7 +89,7 @@
MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */
MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */
- pcie: pcie-controller {
+ pcie: pcie {
compatible = "marvell,dove-pcie";
status = "disabled";
device_type = "pci";
@@ -106,7 +106,7 @@
0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
- pcie0: pcie-port@0 {
+ pcie0: pcie@1 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
@@ -118,13 +118,14 @@
#size-cells = <2>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 16>;
};
- pcie1: pcie-port@1 {
+ pcie1: pcie@2 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
@@ -136,6 +137,7 @@
#size-cells = <2>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
new file mode 100644
index 000000000000..343e95f9a001
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -0,0 +1,258 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound0: sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "dra7:usr1";
+ gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led1 {
+ label = "dra7:usr2";
+ gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "dra7:usr3";
+ gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "dra7:usr4";
+ gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ USER1 {
+ label = "btnUser1";
+ linux,code = <BTN_0>;
+ gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+ };
+
+ USER2 {
+ label = "btnUser2";
+ linux,code = <BTN_1>;
+ gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&mcspi1 {
+ status = "okay";
+};
+
+&mcspi2 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ spi-max-frequency = <76800000>;
+ m25p80@0 {
+ compatible = "s25fl256s1";
+ spi-max-frequency = <76800000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x000010000>;
+ };
+ partition@1 {
+ label = "QSPI.SPL.backup1";
+ reg = <0x00010000 0x00010000>;
+ };
+ partition@2 {
+ label = "QSPI.SPL.backup2";
+ reg = <0x00020000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.SPL.backup3";
+ reg = <0x00030000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@6 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@7 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@8 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@9 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
+
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+ dr_mode = "host";
+};
+
+&atl {
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_gfclk_mux>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index f47fc4daf062..aa426dabb6c3 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -8,9 +8,8 @@
/dts-v1/;
#include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
-#include <dt-bindings/input/input.h>
+#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
/ {
model = "TI DRA742";
@@ -21,8 +20,12 @@
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
- chosen {
- stdout-path = &uart1;
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ vin-supply = <&smps9_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
evm_3v3_sd: fixedregulator-sd {
@@ -51,11 +54,6 @@
regulator-max-microvolt = <1800000>;
};
- extcon_usb1: extcon_usb1 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
- };
-
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
@@ -73,85 +71,6 @@
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
- sound0: sound0 {
- compatible = "simple-audio-card";
- simple-audio-card,name = "DRA7xx-EVM";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Line", "Line Out",
- "Microphone", "Mic Jack",
- "Line", "Line In";
- simple-audio-card,routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT",
- "Line Out", "LLOUT",
- "Line Out", "RLOUT",
- "MIC3L", "Mic Jack",
- "MIC3R", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "LINE1L", "Line In",
- "LINE1R", "Line In";
- simple-audio-card,format = "dsp_b";
- simple-audio-card,bitclock-master = <&sound0_master>;
- simple-audio-card,frame-master = <&sound0_master>;
- simple-audio-card,bitclock-inversion;
-
- sound0_master: simple-audio-card,cpu {
- sound-dai = <&mcasp3>;
- system-clock-frequency = <5644800>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&tlv320aic3106>;
- clocks = <&atl_clkin2_ck>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led0 {
- label = "dra7:usr1";
- gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led1 {
- label = "dra7:usr2";
- gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led2 {
- label = "dra7:usr3";
- gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led3 {
- label = "dra7:usr4";
- gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- USER1 {
- label = "btnUser1";
- linux,code = <BTN_0>;
- gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
- };
-
- USER2 {
- label = "btnUser2";
- linux,code = <BTN_1>;
- gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
- };
- };
};
&dra7_pmx_core {
@@ -406,137 +325,49 @@
};
};
-&i2c3 {
- status = "okay";
- clock-frequency = <400000>;
-};
-
-&mcspi1 {
- status = "okay";
-};
-
-&mcspi2 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
- interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
- <&dra7_pmx_core 0x3e0>;
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
&mmc1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&evm_3v3_sd>;
- vmmc_aux-supply = <&ldo1_reg>;
+ vqmmc-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is always hardwired.
*/
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+ pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_default>;
- vmmc-supply = <&evm_3v3_sw>;
+ vmmc-supply = <&evm_1v8_sw>;
bus-width = <8>;
+ pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+ pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+ pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+ pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
};
&cpu0 {
cpu0-supply = <&smps123_reg>;
};
-&qspi {
- status = "okay";
-
- spi-max-frequency = <76800000>;
- m25p80@0 {
- compatible = "s25fl256s1";
- spi-max-frequency = <76800000>;
- reg = <0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* MTD partition table.
- * The ROM checks the first four physical blocks
- * for a valid file to boot and the flash here is
- * 64KiB block size.
- */
- partition@0 {
- label = "QSPI.SPL";
- reg = <0x00000000 0x000010000>;
- };
- partition@1 {
- label = "QSPI.SPL.backup1";
- reg = <0x00010000 0x00010000>;
- };
- partition@2 {
- label = "QSPI.SPL.backup2";
- reg = <0x00020000 0x00010000>;
- };
- partition@3 {
- label = "QSPI.SPL.backup3";
- reg = <0x00030000 0x00010000>;
- };
- partition@4 {
- label = "QSPI.u-boot";
- reg = <0x00040000 0x00100000>;
- };
- partition@5 {
- label = "QSPI.u-boot-spl-os";
- reg = <0x00140000 0x00080000>;
- };
- partition@6 {
- label = "QSPI.u-boot-env";
- reg = <0x001c0000 0x00010000>;
- };
- partition@7 {
- label = "QSPI.u-boot-env.backup1";
- reg = <0x001d0000 0x0010000>;
- };
- partition@8 {
- label = "QSPI.kernel";
- reg = <0x001e0000 0x0800000>;
- };
- partition@9 {
- label = "QSPI.file-system";
- reg = <0x009e0000 0x01620000>;
- };
- };
-};
-
-&omap_dwc3_1 {
- extcon = <&extcon_usb1>;
-};
-
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
-&usb1 {
- dr_mode = "otg";
- extcon = <&extcon_usb1>;
-};
-
-&usb2 {
- dr_mode = "host";
-};
-
&elm {
status = "okay";
};
@@ -556,6 +387,7 @@
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
@@ -666,57 +498,6 @@
pinctrl-2 = <&dcan1_pins_default>;
};
-&atl {
- assigned-clocks = <&abe_dpll_sys_clk_mux>,
- <&atl_gfclk_mux>,
- <&dpll_abe_ck>,
- <&dpll_abe_m2x2_ck>,
- <&atl_clkin2_ck>;
- assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
- assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
-
- status = "okay";
-
- atl2 {
- bws = <DRA7_ATL_WS_MCASP2_FSX>;
- aws = <DRA7_ATL_WS_MCASP3_FSX>;
- };
-};
-
-&mcasp3 {
- #sound-dai-cells = <0>;
-
- assigned-clocks = <&mcasp3_ahclkx_mux>;
- assigned-clock-parents = <&atl_clkin2_ck>;
-
- status = "okay";
-
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- /* 4 serializer */
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 1 2 0 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
-
-&mailbox5 {
+&pcie1_rc {
status = "okay";
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
- status = "okay";
- };
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
- status = "okay";
- };
-};
-
-&mailbox6 {
- status = "okay";
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
- status = "okay";
- };
- mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
- status = "okay";
- };
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 0f0f6f58bd18..02a136a4661a 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -196,6 +196,7 @@
scm_conf1: scm_conf@1c04 {
compatible = "syscon";
reg = <0x1c04 0x0020>;
+ #syscon-cells = <2>;
};
scm_conf_pcie: scm_conf@1c24 {
@@ -287,7 +288,11 @@
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
- pcie1: pcie@51000000 {
+ /**
+ * To enable PCI endpoint mode, disable the pcie1_rc
+ * node and enable pcie1_ep mode.
+ */
+ pcie1_rc: pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
@@ -309,12 +314,28 @@
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
+ status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
+
+ pcie1_ep: pcie_ep@51000000 {
+ compatible = "ti,dra7-pcie-ep";
+ reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+ reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+ interrupts = <0 232 0x4>;
+ num-lanes = <1>;
+ num-ib-windows = <4>;
+ num-ob-windows = <16>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+ status = "disabled";
+ };
};
axi@1 {
@@ -418,6 +439,14 @@
reg = <0x40d00000 0x100>;
};
+ dra7_iodelay_core: padconf@4844a000 {
+ compatible = "ti,dra7-iodelay";
+ reg = <0x4844a000 0x0d1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
@@ -1037,6 +1066,7 @@
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
+ max-frequency = <192000000>;
};
mmc2: mmc@480b4000 {
@@ -1048,6 +1078,7 @@
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
status = "disabled";
+ max-frequency = <192000000>;
};
mmc3: mmc@480ad000 {
@@ -1059,6 +1090,8 @@
dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
dma-names = "tx", "rx";
status = "disabled";
+ /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
+ max-frequency = <64000000>;
};
mmc4: mmc@480d1000 {
@@ -1070,6 +1103,7 @@
dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
dma-names = "tx", "rx";
status = "disabled";
+ max-frequency = <192000000>;
};
mmu0_dsp1: mmu@40d01000 {
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 9897e8fa6845..41c9132eb550 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -7,6 +7,7 @@
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
@@ -32,6 +33,16 @@
3000000 0x1>;
};
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&lp8732_buck0_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
poweroff: gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@@ -162,7 +173,24 @@
};
&mmc1 {
- vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
};
&mac {
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 85780549bc26..2e485a13dfd7 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -311,6 +311,7 @@
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
@@ -419,8 +420,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
-
- vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
@@ -564,3 +563,7 @@
status = "okay";
};
};
+
+&pcie1_rc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 6f9b6f31437e..bf588d00728d 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
@@ -15,6 +16,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&i2c1 {
@@ -84,3 +95,24 @@
ti,dp83867-rxctrl-strap-quirk;
};
};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
index e6df676886c0..57bfe5caf5e4 100644
--- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
@@ -146,5 +146,5 @@
};
&mmc1 {
- vmmc_aux-supply = <&ldo1_reg>;
+ vqmmc-supply = <&ldo1_reg>;
};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index cd9c4ff12654..c572693b1665 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI DRA722";
@@ -13,6 +14,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&i2c1 {
@@ -43,3 +54,24 @@
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+};
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..088013c6dc6e
--- /dev/null
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -0,0 +1,350 @@
+/*
+ * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
+ * 'dra72_' tag to entries. Both the new and old entries should gain a tag.
+ *
+ * Datamanual Revisions:
+ *
+ * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
+ * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
+ * DRA71x : SPRS960B, Revised February 2017
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1_pins_sdr104 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2_pins_hs200 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */
+ 0x624 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x630 A_DELAY_PS(1375) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x63C A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x648 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x654 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x620 A_DELAY_PS(1230) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65C A_DELAY_PS(99) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(560) G_DELAY_PS(365) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(29) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(433) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(287) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(351) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(520) G_DELAY_PS(320) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(40) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(83) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(98) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(106) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(51) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(363) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(199) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(273) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x1a4 A_DELAY_PS(119) G_DELAY_PS(0) /* CFG_GPMC_A20_IN */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_IN */
+ 0x1bc A_DELAY_PS(18) G_DELAY_PS(0) /* CFG_GPMC_A22_IN */
+ 0x1c8 A_DELAY_PS(894) G_DELAY_PS(0) /* CFG_GPMC_A23_IN */
+ 0x1d4 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_IN */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1ec A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */
+ 0x1f8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_IN */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x194 A_DELAY_PS(152) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(206) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(78) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(266) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(150) G_DELAY_PS(95) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(250) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(100) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(870) G_DELAY_PS(415) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(695) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(924) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(719) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(824) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(877) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(446) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(847) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(586) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(1039) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(285) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(189) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(70) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(730) G_DELAY_PS(360) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(70) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(231) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(39) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(176) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(101) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(360) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..28ebb4eb884a
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -0,0 +1,647 @@
+/*
+ * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
+ *
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50: mmc1_pins_ddr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1_pins_sdr104 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2_pins_hs200 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc4_pins_default: mmc4_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_hs: mmc4_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc3_pins_default: mmc3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_hs: mmc3_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr12: mmc3_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr25: mmc3_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr50: mmc3_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr12: mmc4_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr25: mmc4_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(572) G_DELAY_PS(540) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1525) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(0) G_DELAY_PS(600) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(55) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(403) G_DELAY_PS(120) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63c A_DELAY_PS(23) G_DELAY_PS(60) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(25) G_DELAY_PS(60) /* CFG_MMC1_DAT2_IN */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(1076) G_DELAY_PS(330) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1271) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(722) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(751) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(20) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63C A_DELAY_PS(256) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(263) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(1063) G_DELAY_PS(17) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(600) G_DELAY_PS(400) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(621) G_DELAY_PS(600) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(300) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(739) G_DELAY_PS(600) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(812) G_DELAY_PS(600) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(954) G_DELAY_PS(600) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(935) G_DELAY_PS(600) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(525) G_DELAY_PS(600) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(767) G_DELAY_PS(600) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(225) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(565) G_DELAY_PS(600) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(969) G_DELAY_PS(600) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(180) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(274) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(162) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(401) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(73) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(465) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(115) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(633) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(935) G_DELAY_PS(280) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(621) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(183) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(467) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(262) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(46) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(684) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(274) G_DELAY_PS(240) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(514) G_DELAY_PS(360) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(187) G_DELAY_PS(120) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(121) G_DELAY_PS(60) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(406) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(659) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(130) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(169) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(457) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(96) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(582) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(391) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(561) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(2651) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1572) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(1913) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1721) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1891) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(1919) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
new file mode 100644
index 000000000000..b024a65c6e27
--- /dev/null
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -0,0 +1,423 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ model = "TI DRA762 EVM";
+ compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ vsys_12v0: fixedregulator-vsys12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_5v0: fixedregulator-vsys5v0 {
+ /* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vsys_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_3v3: fixedregulator-vsys3v3 {
+ /* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vio_3v3: fixedregulator-vio_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vio_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vio_3v3>;
+ enable-active-high;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ vio_1v8: fixedregulator-vio_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps5_reg>;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ vin-supply = <&vsys_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&vio_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps65917: tps65917@58 {
+ compatible = "ti,tps65917";
+ reg = <0x58>;
+ ti,system-power-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ tps65917_pmic {
+ compatible = "ti,tps65917-pmic";
+
+ smps12-in-supply = <&vsys_3v3>;
+ smps3-in-supply = <&vsys_3v3>;
+ smps4-in-supply = <&vsys_3v3>;
+ smps5-in-supply = <&vsys_3v3>;
+ ldo1-in-supply = <&vsys_3v3>;
+ ldo2-in-supply = <&vsys_3v3>;
+ ldo3-in-supply = <&vsys_5v0>;
+ ldo4-in-supply = <&vsys_5v0>;
+ ldo5-in-supply = <&vsys_3v3>;
+
+ tps65917_regulators: regulators {
+ smps12_reg: smps12 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps12";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_CORE */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ smps4_reg: smps4 {
+ /* VDD_IVA */
+ regulator-name = "smps4";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps5_reg: smps5 {
+ /* VDDS1V8 */
+ regulator-name = "smps5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> VDA_PHY1_1V8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-bypass;
+ };
+
+ ldo2_reg: ldo2 {
+ /* LDO2_OUT --> VDA_PHY2_1V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-bypass;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDA_USB_3V3 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDD_SDIO_DV */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps65917_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps65917>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <6>;
+ };
+ };
+
+ lp87565: lp87565@60 {
+ compatible = "ti,lp87565-q1";
+ reg = <0x60>;
+
+ buck10-in-supply =<&vsys_3v3>;
+ buck23-in-supply =<&vsys_3v3>;
+
+ regulators: regulators {
+ buck10_reg: buck10 {
+ /*VDD_MPU*/
+ regulator-name = "buck10";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck23_reg: buck23 {
+ /* VDD_GPU*/
+ regulator-name = "buck23";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pcf_lcd: pcf8757@20 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ pcf_gpio_21: pcf8757@21 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcf_hdmi: pcf8575@26 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
+
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&vio_3v3>;
+ IOVDD-supply = <&vio_3v3>;
+ DRVDD-supply = <&vio_3v3>;
+ DVDD-supply = <&aic_dvdd>;
+ };
+};
+
+&cpu0 {
+ vdd-supply = <&buck10_reg>;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vio_3v3_sd>;
+ vmmc_aux-supply = <&ldo4_reg>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is always hardwired.
+ */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&vio_1v8>;
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+};
+
+/* No RTC on this device */
+&rtc {
+ status = "disabled";
+};
+
+&mac {
+ status = "okay";
+
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <2>;
+ phy-mode = "rgmii-id";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <3>;
+ phy-mode = "rgmii-id";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ dp83867_0: ethernet-phy@2 {
+ reg = <2>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+
+ dp83867_1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldo3_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo3_reg>;
+};
+
+&qspi {
+ spi-max-frequency = <96000000>;
+ m25p80@0 {
+ spi-max-frequency = <96000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
new file mode 100644
index 000000000000..1c88c581ff18
--- /dev/null
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+ compatible = "ti,dra762", "ti,dra7";
+
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+ ti,irqs-skip = <10 67 68 133 139 140>;
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
index 4bd2ee87124e..4cbfa09c6c4e 100644
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -22,7 +22,6 @@
};
&mshc_2 {
- num-slots = <1>;
cap-sd-highspeed;
disable-wp;
vqmmc-supply = <&ldo3_reg>;
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 59c89d7662a8..639c2e605f3c 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -304,7 +304,6 @@
};
&mshc_0 {
- num-slots = <1>;
non-removable;
cap-mmc-highspeed;
card-detect-delay = <200>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index accee81da266..bbdfcbc6e7d2 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -426,7 +426,6 @@
&mshc_0 {
#address-cells = <1>;
#size-cells = <0>;
- num-slots = <1>;
broken-cd;
non-removable;
cap-mmc-highspeed;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 443e0c98dc73..0b45467d77a8 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -220,21 +220,6 @@
samsung,pll-clock-frequency = <24000000>;
status = "okay";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- remote-endpoint = <&dsi_in>;
- samsung,burst-clock-frequency = <250000000>;
- samsung,esc-clock-frequency = <20000000>;
- };
- };
- };
-
panel@0 {
compatible = "samsung,s6e63j0x03";
reg = <0>;
@@ -264,12 +249,6 @@
vsync-len = <2>;
};
};
-
- port {
- dsi_in: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
};
};
@@ -642,7 +621,6 @@
&mshc_0 {
#address-cells = <1>;
#size-cells = <0>;
- num-slots = <1>;
broken-cd;
non-removable;
cap-mmc-highspeed;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 645feffb9239..7b6ab7265110 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -202,21 +202,6 @@
samsung,pll-clock-frequency = <24000000>;
status = "okay";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- remote-endpoint = <&dsi_in>;
- samsung,burst-clock-frequency = <500000000>;
- samsung,esc-clock-frequency = <20000000>;
- };
- };
- };
-
panel@0 {
reg = <0>;
compatible = "samsung,s6e8aa0";
@@ -244,12 +229,6 @@
vsync-len = <2>;
};
};
-
- port {
- dsi_in: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index 4cd62487bb16..14ce2c69bc0b 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -466,7 +466,6 @@
pinctrl-names = "default";
status = "okay";
vmmc-supply = <&buck9_reg>;
- num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 219d587c5a85..102acd78be15 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -516,7 +516,6 @@
mmc-pwrseq = <&emmc_pwrseq>;
status = "okay";
- num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 7a83e2df18a6..8a89eb893d64 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -488,7 +488,6 @@
pinctrl-names = "default";
status = "okay";
- num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 35e9b94b86b8..bceb919ac637 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -390,21 +390,6 @@
samsung,pll-clock-frequency = <24000000>;
status = "okay";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- remote-endpoint = <&dsi_in>;
- samsung,burst-clock-frequency = <500000000>;
- samsung,esc-clock-frequency = <20000000>;
- };
- };
- };
-
panel@0 {
compatible = "samsung,s6e8aa0";
reg = <0>;
@@ -432,12 +417,6 @@
vsync-len = <2>;
};
};
-
- port {
- dsi_in: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
};
};
@@ -901,7 +880,6 @@
};
&mshc_0 {
- num-slots = <1>;
broken-cd;
non-removable;
card-detect-delay = <200>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6a432460eb77..18a7f396ac5f 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -518,7 +518,6 @@
&mmc_0 {
status = "okay";
- num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@@ -533,7 +532,6 @@
&mmc_2 {
status = "okay";
- num-slots = <1>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 6632f657394e..062cba4c2c31 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -346,7 +346,6 @@
&mmc_0 {
status = "okay";
- num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@@ -360,7 +359,6 @@
&mmc_2 {
status = "okay";
- num-slots = <1>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index e1d293dbbe5d..8788880e459d 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -530,7 +530,6 @@
/* eMMC flash */
&mmc_0 {
status = "okay";
- num-slots = <1>;
non-removable;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -544,7 +543,6 @@
/* uSD card */
&mmc_2 {
status = "okay";
- num-slots = <1>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -564,7 +562,6 @@
*/
&mmc_3 {
status = "okay";
- num-slots = <1>;
non-removable;
cap-sdio-irq;
keep-power-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 95c3bcace9dc..d53bfcbeb39c 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -427,7 +427,6 @@
&mmc_0 {
status = "okay";
- num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@@ -445,7 +444,6 @@
*/
&mmc_1 {
status = "okay";
- num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index d0cc300cfb4b..73b7cdd5f522 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -67,7 +67,6 @@
&mmc_0 {
status = "okay";
- num-slots = <1>;
broken-cd;
bypass-smu;
cap-mmc-highspeed;
@@ -83,7 +82,6 @@
&mmc_2 {
status = "okay";
- num-slots = <1>;
cap-sd-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 6cc74d97daae..9cb7726ef8d0 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -41,7 +41,6 @@
&mmc_0 {
status = "okay";
- num-slots = <1>;
cap-mmc-highspeed;
broken-cd;
card-detect-delay = <200>;
@@ -53,7 +52,6 @@
&mmc_2 {
status = "okay";
- num-slots = <1>;
cap-sd-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index f9a75bfd3f2b..683a4cfb4a23 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -699,7 +699,6 @@
/* eMMC flash */
&mmc_0 {
status = "okay";
- num-slots = <1>;
mmc-hs200-1_8v;
cap-mmc-highspeed;
non-removable;
@@ -717,7 +716,6 @@
/* WiFi SDIO module */
&mmc_1 {
status = "okay";
- num-slots = <1>;
non-removable;
cap-sdio-irq;
keep-power-in-suspend;
@@ -737,7 +735,6 @@
/* uSD card */
&mmc_2 {
status = "okay";
- num-slots = <1>;
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index bc4954e69f7b..7a00be7ea6d7 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -317,6 +317,7 @@
phys = <&pcie_phy0>;
ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 53>;
@@ -339,6 +340,7 @@
phys = <&pcie_phy1>;
ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 56>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 953dc8677dc8..b2b95ff205e8 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -667,7 +667,6 @@
/* eMMC flash */
&mmc_0 {
status = "okay";
- num-slots = <1>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
cap-mmc-highspeed;
@@ -686,7 +685,6 @@
/* WiFi SDIO module */
&mmc_1 {
status = "okay";
- num-slots = <1>;
non-removable;
cap-sdio-irq;
keep-power-in-suspend;
@@ -706,7 +704,6 @@
/* uSD card */
&mmc_2 {
status = "okay";
- num-slots = <1>;
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
new file mode 100644
index 000000000000..e75e2d44371c
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -0,0 +1,246 @@
+/*
+ * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "D-Link DIR-685 Xtreme N Storage Router";
+ compatible = "dlink,dir-685", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ /* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ stdout-path = "uart0:115200n8";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button-esc {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_ESC>;
+ label = "reset";
+ /* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+ button-eject {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_EJECTCD>;
+ label = "unmount";
+ /* Collides with LPC LFRAME, UART RTS, SSP TXD */
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-wps {
+ label = "dir685:blue:WPS";
+ /* Collides with ICE */
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ /*
+ * These two LEDs are on the side of the device.
+ * For electrical reasons, both LEDs cannot be active
+ * at the same time so only blue or orange can on at
+ * one time. Enabling both makes the LED go dark.
+ * The LEDs both sit inside the unmount button and the
+ * label on the case says "unmount".
+ */
+ led-blue-hd {
+ label = "dir685:blue:HD";
+ /* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-orange-hd {
+ label = "dir685:orange:HD";
+ /* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ /*
+ * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
+ * Since the platform has no temperature sensor, this is controlled
+ * from userspace by using the hard disks S.M.A.R.T. temperature
+ * sensor. It is turned on when the temperature exceeds 46 degrees
+ * and turned off when the temperatures goes below 41 degrees
+ * (celsius).
+ */
+ gpio-fan {
+ compatible = "gpio-fan";
+ /* Collides with IDE */
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0>, <10000 1>;
+ #cooling-cells = <2>;
+ };
+
+ /*
+ * The touchpad input is connected to a GPIO bit-banged
+ * I2C bus.
+ */
+ gpio-i2c {
+ compatible = "i2c-gpio";
+ /* Collides with ICE */
+ gpios = <&gpio0 5 0>, /* SDA */
+ <&gpio0 6 0>; /* SCL */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkeys@26 {
+ compatible = "dlink,dir685-touchkeys";
+ reg = <0x26>;
+ interrupt-parent = <&gpio0>;
+ /* Collides with NAND flash */
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 32MB of flash */
+ reg = <0x30000000 0x02000000>;
+
+ /*
+ * This "RedBoot" is the Storlink derivative.
+ */
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ /*
+ * Between the boot loader and the rootfs is the kernel
+ * in a custom Storlink format flashed from the boot
+ * menu. The rootfs is in squashfs format.
+ */
+ partition@1800c0 {
+ label = "rootfs";
+ reg = <0x001800c0 0x01dbff40>;
+ read-only;
+ };
+ partition@1f40000 {
+ label = "upgrade";
+ reg = <0x01f40000 0x00040000>;
+ read-only;
+ };
+ partition@1f80000 {
+ label = "rgdb";
+ reg = <0x01f80000 0x00040000>;
+ read-only;
+ };
+ /*
+ * This partition contains MAC addresses for WAN,
+ * WLAN and LAN, and the country code (for wireless
+ * I guess).
+ */
+ partition@1fc0000 {
+ label = "nvram";
+ reg = <0x01fc0000 0x00020000>;
+ read-only;
+ };
+ partition@1fe0000 {
+ label = "LangPack";
+ reg = <0x01fe0000 0x00020000>;
+ read-only;
+ };
+ };
+
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ * gpio0bgrp cover line 5, 6 used by TK I2C
+ * gpio0bgrp cover line 7 used by WPS LED
+ * gpio0cgrp cover line 8, 13 used by keys
+ * and 11, 12 used by the HD LEDs
+ * gpio0egrp cover line 16 used by VDISP
+ * gpio0fgrp cover line 17 used by TK IRQ
+ * gpio0ggrp cover line 20 used by panel CS
+ * gpio0hgrp cover line 21,22 used by RTL8366RB
+ */
+ gpio0_default_pins: pinctrl-gpio0 {
+ mux {
+ function = "gpio0";
+ groups = "gpio0bgrp",
+ "gpio0cgrp",
+ "gpio0egrp",
+ "gpio0fgrp",
+ "gpio0ggrp",
+ "gpio0hgrp";
+ };
+ };
+ /*
+ * gpio1bgrp cover line 5,8,7 used by panel SPI
+ * also line 6 used by the fan
+ *
+ */
+ gpio1_default_pins: pinctrl-gpio1 {
+ mux {
+ function = "gpio1";
+ groups = "gpio1bgrp";
+ };
+ };
+ };
+ };
+
+ sata: sata@46000000 {
+ cortina,gemini-ata-muxmode = <0>;
+ cortina,gemini-enable-sata-bridge;
+ status = "okay";
+ };
+
+ gpio0: gpio@4d000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_default_pins>;
+ };
+
+ gpio1: gpio@4e000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_default_pins>;
+ };
+
+ pci@50000000 {
+ status = "okay";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+ };
+
+ ata@63000000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 55f6a4f1f801..b4fc58c8cf8d 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -33,6 +33,7 @@
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Backup button";
+ /* Conflict with TVC */
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
};
button@31 {
@@ -40,6 +41,7 @@
wakeup-source;
linux,code = <KEY_RESTART>;
label = "Softreset button";
+ /* Conflict with TVC */
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
};
};
@@ -48,11 +50,13 @@
compatible = "gpio-leds";
led@28 {
label = "nas4220b:orange:hdd";
+ /* Conflict with TVC */
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led@30 {
label = "nas4220b:green:os";
+ /* Conflict with TVC */
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
@@ -99,12 +103,32 @@
};
};
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ * gpio1dgrp cover line 28-31 otherwise used
+ * by TVC.
+ */
+ gpio1_default_pins: pinctrl-gpio1 {
+ mux {
+ function = "gpio1";
+ groups = "gpio1dgrp";
+ };
+ };
+ };
+ };
+
sata: sata@46000000 {
cortina,gemini-ata-muxmode = <0>;
cortina,gemini-enable-sata-bridge;
status = "okay";
};
+ gpio1: gpio@4e000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_default_pins>;
+ };
+
ata@63000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 7b920bfbda32..3613b264f45f 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -33,6 +33,7 @@
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Reset to defaults";
+ /* Conflict with TVC */
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};
@@ -42,12 +43,14 @@
led@7 {
/* FIXME: add the LED color */
label = "rut1xx::gsm";
+ /* Conflict with ICE */
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led@31 {
/* FIXME: add the LED color */
label = "rut1xx::power";
+ /* Conflict with NAND CE0 */
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "heartbeat";
@@ -61,5 +64,41 @@
reg = <0x30000000 0x00800000>;
/* TODO: add flash partitions here */
};
+
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ * gpio0bgrp cover line 7 used by GSM LED
+ * gpio0fgrp cover line 17 used by power LED
+ */
+ gpio0_default_pins: pinctrl-gpio0 {
+ mux {
+ function = "gpio0";
+ groups = "gpio0bgrp",
+ "gpio0fgrp";
+ };
+ };
+ /*
+ * gpio1dgrp cover line 28-31 otherwise used
+ * by TVC.
+ */
+ gpio1_default_pins: pinctrl-gpio1 {
+ mux {
+ function = "gpio1";
+ groups = "gpio1dgrp";
+ };
+ };
+ };
+ };
+
+ gpio0: gpio@4d000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_default_pins>;
+ };
+
+ gpio1: gpio@4e000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_default_pins>;
+ };
};
};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 4d200f0bcd45..7cfa9caf47d4 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -33,6 +33,7 @@
wakeup-source;
linux,code = <KEY_SETUP>;
label = "factory reset";
+ /* Conflict with NAND flash */
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
};
@@ -41,12 +42,14 @@
compatible = "gpio-leds";
led@20 {
label = "sq201:green:info";
+ /* Conflict with parallel flash */
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led@31 {
label = "sq201:green:usb";
+ /* Conflict with parallel and NAND flash */
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "usb-host";
@@ -55,7 +58,15 @@
soc {
flash@30000000 {
- status = "okay";
+ /*
+ * Flash access can be enabled, with the side effect
+ * of disabling access to GPIO LED on GPIO0[20] which
+ * reuse one of the parallel flash chip select lines.
+ * Also the default firmware on the machine has the
+ * problem that since it uses the flash, the two LEDS
+ * on the right become numb.
+ */
+ /* status = "okay"; */
/* 16MB of flash */
reg = <0x30000000 0x01000000>;
@@ -93,12 +104,35 @@
};
};
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ * gpio0fgrp cover line 18 used by reset button
+ * gpio0ggrp cover line 20 used by info LED
+ * gpio0kgrp cover line 31 used by USB LED
+ */
+ gpio0_default_pins: pinctrl-gpio0 {
+ mux {
+ function = "gpio0";
+ groups = "gpio0fgrp",
+ "gpio0ggrp",
+ "gpio0kgrp";
+ };
+ };
+ };
+ };
+
sata: sata@46000000 {
cortina,gemini-ata-muxmode = <0>;
cortina,gemini-enable-sata-bridge;
status = "okay";
};
+ gpio0: gpio@4d000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_default_pins>;
+ };
+
pci@50000000 {
status = "okay";
interrupt-map-mask = <0xf800 0 0 7>;
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index 63b756e3bf5a..38a49e750478 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -33,6 +33,7 @@
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
+ /* Conflict with ICE */
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
};
@@ -42,21 +43,25 @@
led@1 {
label = "wbd111:red:L3";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
label = "wbd111:green:L4";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
label = "wbd111:red:L4";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "wbd111:green:L3";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
@@ -98,5 +103,26 @@
read-only;
};
};
+
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ * gpio0agrp cover line 0-4
+ * gpio0bgrp cover line 5
+ */
+ gpio0_default_pins: pinctrl-gpio0 {
+ mux {
+ function = "gpio0";
+ groups = "gpio0agrp",
+ "gpio0bgrp";
+ };
+ };
+ };
+ };
+
+ gpio0: gpio@4d000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_default_pins>;
+ };
};
};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 9747f5a47807..f77e34e0df0b 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -33,6 +33,7 @@
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
+ /* Conflict with ICE */
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
};
@@ -42,21 +43,25 @@
led@1 {
label = "wbd111:red:L3";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
label = "wbd111:green:L4";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
label = "wbd111:red:L4";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "wbd111:green:L3";
+ /* Conflict with TVC and extended parallel flash */
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
@@ -98,5 +103,26 @@
read-only;
};
};
+
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ * gpio0agrp cover line 0-4
+ * gpio0bgrp cover line 5
+ */
+ gpio0_default_pins: pinctrl-gpio0 {
+ mux {
+ function = "gpio0";
+ groups = "gpio0agrp",
+ "gpio0bgrp";
+ };
+ };
+ };
+ };
+
+ gpio0: gpio@4d000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_default_pins>;
+ };
};
};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 141d8d3a1d07..c68e8d430234 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -5,6 +5,8 @@
/include/ "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/cortina,gemini-clock.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -18,6 +20,8 @@
flash@30000000 {
compatible = "cortina,gemini-flash", "cfi-flash";
syscon = <&syscon>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pflash_default_pins>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
@@ -39,22 +43,123 @@
/* RESET_GLOBAL | RESET_CPU1 */
mask = <0xC0000000>;
};
+
+ pinctrl {
+ compatible = "cortina,gemini-pinctrl";
+ regmap = <&syscon>;
+ /* Hog the DRAM pins */
+ pinctrl-names = "default";
+ pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
+ <&vcontrol_default_pins>;
+
+ dram_default_pins: pinctrl-dram {
+ mux {
+ function = "dram";
+ groups = "dramgrp";
+ };
+ };
+ rtc_default_pins: pinctrl-rtc {
+ mux {
+ function = "rtc";
+ groups = "rtcgrp";
+ };
+ };
+ power_default_pins: pinctrl-power {
+ mux {
+ function = "power";
+ groups = "powergrp";
+ };
+ };
+ cir_default_pins: pinctrl-cir {
+ mux {
+ function = "cir";
+ groups = "cirgrp";
+ };
+ };
+ system_default_pins: pinctrl-system {
+ mux {
+ function = "system";
+ groups = "systemgrp";
+ };
+ };
+ vcontrol_default_pins: pinctrl-vcontrol {
+ mux {
+ function = "vcontrol";
+ groups = "vcontrolgrp";
+ };
+ };
+ ice_default_pins: pinctrl-ice {
+ mux {
+ function = "ice";
+ groups = "icegrp";
+ };
+ };
+ uart_default_pins: pinctrl-uart {
+ mux {
+ function = "uart";
+ groups = "uartrxtxgrp";
+ };
+ };
+ pflash_default_pins: pinctrl-pflash {
+ mux {
+ function = "pflash";
+ groups = "pflashgrp";
+ };
+ };
+ usb_default_pins: pinctrl-usb {
+ mux {
+ function = "usb";
+ groups = "usbgrp";
+ };
+ };
+ gmii_default_pins: pinctrl-gmii {
+ mux {
+ function = "gmii";
+ groups = "gmiigrp";
+ };
+ };
+ pci_default_pins: pinctrl-pci {
+ mux {
+ function = "pci";
+ groups = "pcigrp";
+ };
+ };
+ sata_default_pins: pinctrl-sata {
+ mux {
+ function = "sata";
+ groups = "satagrp";
+ };
+ };
+ /* Activate both groups of pins for this state */
+ sata_and_ide_pins: pinctrl-sata-ide {
+ mux0 {
+ function = "sata";
+ groups = "satagrp";
+ };
+ mux1 {
+ function = "ide";
+ groups = "idegrp";
+ };
+ };
+ };
};
watchdog@41000000 {
compatible = "cortina,gemini-watchdog";
reg = <0x41000000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&syscon 23>;
- clocks = <&syscon 2>;
+ resets = <&syscon GEMINI_RESET_WDOG>;
+ clocks = <&syscon GEMINI_CLK_APB>;
};
uart0: serial@42000000 {
compatible = "ns16550a";
reg = <0x42000000 0x100>;
- resets = <&syscon 18>;
- clocks = <&syscon 6>;
+ resets = <&syscon GEMINI_RESET_UART>;
+ clocks = <&syscon GEMINI_CLK_UART>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart_default_pins>;
reg-shift = <2>;
};
@@ -65,9 +170,9 @@
interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
<15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
<16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
- resets = <&syscon 17>;
+ resets = <&syscon GEMINI_RESET_TIMER>;
/* APB clock or RTC clock */
- clocks = <&syscon 2>, <&syscon 0>;
+ clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
clock-names = "PCLK", "EXTCLK";
syscon = <&syscon>;
};
@@ -76,20 +181,30 @@
compatible = "cortina,gemini-rtc";
reg = <0x45000000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&syscon 16>;
- clocks = <&syscon 2>, <&syscon 0>;
+ resets = <&syscon GEMINI_RESET_RTC>;
+ clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
clock-names = "PCLK", "EXTCLK";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_default_pins>;
};
sata: sata@46000000 {
compatible = "cortina,gemini-sata-bridge";
reg = <0x46000000 0x100>;
- resets = <&syscon 26>,
- <&syscon 27>;
+ resets = <&syscon GEMINI_RESET_SATA0>,
+ <&syscon GEMINI_RESET_SATA1>;
reset-names = "sata0", "sata1";
- clocks = <&syscon 10>,
- <&syscon 11>;
+ clocks = <&syscon GEMINI_CLK_GATE_SATA0>,
+ <&syscon GEMINI_CLK_GATE_SATA1>;
clock-names = "SATA0_PCLK", "SATA1_PCLK";
+ /*
+ * This defines the special "ide" state that needs
+ * to be explicitly enabled to enable the IDE pins,
+ * as these pins are normally used for other things.
+ */
+ pinctrl-names = "default", "ide";
+ pinctrl-0 = <&sata_default_pins>;
+ pinctrl-1 = <&sata_and_ide_pins>;
syscon = <&syscon>;
status = "disabled";
};
@@ -97,7 +212,7 @@
intcon: interrupt-controller@48000000 {
compatible = "faraday,ftintc010";
reg = <0x48000000 0x1000>;
- resets = <&syscon 14>;
+ resets = <&syscon GEMINI_RESET_INTCON0>;
interrupt-controller;
#interrupt-cells = <2>;
};
@@ -106,14 +221,16 @@
compatible = "cortina,gemini-power-controller";
reg = <0x4b000000 0x100>;
interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_default_pins>;
};
gpio0: gpio@4d000000 {
compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
reg = <0x4d000000 0x100>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&syscon 20>;
- clocks = <&syscon 2>;
+ resets = <&syscon GEMINI_RESET_GPIO0>;
+ clocks = <&syscon GEMINI_CLK_APB>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -124,8 +241,8 @@
compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
reg = <0x4e000000 0x100>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&syscon 21>;
- clocks = <&syscon 2>;
+ resets = <&syscon GEMINI_RESET_GPIO1>;
+ clocks = <&syscon GEMINI_CLK_APB>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -136,8 +253,8 @@
compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
reg = <0x4f000000 0x100>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&syscon 22>;
- clocks = <&syscon 2>;
+ resets = <&syscon GEMINI_RESET_GPIO2>;
+ clocks = <&syscon GEMINI_CLK_APB>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -151,9 +268,11 @@
* to configure the host bridge.
*/
reg = <0x50000000 0x100>;
- resets = <&syscon 7>;
- clocks = <&syscon 15>, <&syscon 4>;
+ resets = <&syscon GEMINI_RESET_PCI>;
+ clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>;
clock-names = "PCLK", "PCICLK";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pci_default_pins>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
@@ -193,8 +312,8 @@
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63000000 0x1000>;
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
- resets = <&syscon 2>;
- clocks = <&syscon 14>;
+ resets = <&syscon GEMINI_RESET_IDE>;
+ clocks = <&syscon GEMINI_CLK_GATE_IDE>;
clock-names = "PCLK";
sata = <&sata>;
status = "disabled";
@@ -204,8 +323,8 @@
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63400000 0x1000>;
interrupts = <5 IRQ_TYPE_EDGE_RISING>;
- resets = <&syscon 2>;
- clocks = <&syscon 14>;
+ resets = <&syscon GEMINI_RESET_IDE>;
+ clocks = <&syscon GEMINI_CLK_GATE_IDE>;
clock-names = "PCLK";
sata = <&sata>;
status = "disabled";
@@ -217,8 +336,8 @@
arm,primecell-periphid = <0x0003b080>;
reg = <0x67000000 0x1000>;
interrupts = <9 IRQ_TYPE_EDGE_RISING>;
- resets = <&syscon 10>;
- clocks = <&syscon 1>;
+ resets = <&syscon GEMINI_RESET_DMAC>;
+ clocks = <&syscon GEMINI_CLK_AHB>;
clock-names = "apb_pclk";
/* Bus interface AHB1 (AHB0) is totally tilted */
lli-bus-interface-ahb2;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 0ade3619f3c3..09ce8b81fafa 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -452,6 +452,13 @@
interrupt-names = "scm", "smn";
};
+ rngb: rngb@53fb0000 {
+ compatible = "fsl,imx25-rngb";
+ reg = <0x53fb0000 0x4000>;
+ clocks = <&clks 109>;
+ interrupts = <22>;
+ };
+
esdhc1: esdhc@53fb4000 {
compatible = "fsl,imx25-esdhc";
reg = <0x53fb4000 0x4000>;
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
new file mode 100644
index 000000000000..4f54fd4418a3
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -0,0 +1,297 @@
+/*
+ * Copyright 2017 Beckhoff Automation GmbH & Co. KG
+ * based on imx53-qsb.dts
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+ model = "Beckhoff CX9020 Embedded PC";
+ compatible = "bhf,cx9020", "fsl,imx53";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
+ };
+
+ display-0 {
+ #address-cells =<1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+ port@0 {
+ reg = <0>;
+
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display0_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ };
+ };
+ };
+
+ dvi-connector {
+ compatible = "dvi-connector";
+ ddc-i2c-bus = <&i2c2>;
+ digital;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ dvi-converter {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tfp410";
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&display0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr-r {
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ pwr-g {
+ gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ pwr-b {
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ sd1-b {
+ linux,default-trigger = "mmc0";
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ sd2-b {
+ linux,default-trigger = "mmc1";
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulator-3p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ reg_usb_vbus: regulator-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,dte-mode;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_CLKO 0x1c4
+ MX53_PAD_GPIO_16__I2C3_SDA 0x1c4
+ MX53_PAD_EIM_D22__GPIO3_22 0x1c4
+ MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+ MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ MX53_PAD_GPIO_1__ESDHC1_CD 0x1c4
+ MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+ MX53_PAD_GPIO_3__GPIO1_3 0x1c4
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_GPIO_4__ESDHC2_CD 0x1e4
+ MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+ MX53_PAD_GPIO_8__GPIO1_8 0x1c4
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_ipu_disp0: ipudisp0grp {
+ fsl,pins = <
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D26__UART2_RXD_MUX 0x1e4
+ MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+ MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+ MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h
index aec406bc65eb..59f9c29e3fe2 100644
--- a/arch/arm/boot/dts/imx53-pinfunc.h
+++ b/arch/arm/boot/dts/imx53-pinfunc.h
@@ -524,6 +524,7 @@
#define MX53_PAD_EIM_D25__UART1_DSR 0x140 0x488 0x000 0x7 0x0
#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x144 0x48c 0x000 0x0 0x0
#define MX53_PAD_EIM_D26__GPIO3_26 0x144 0x48c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX 0x144 0x48c 0x880 0x2 0x0
#define MX53_PAD_EIM_D26__UART2_TXD_MUX 0x144 0x48c 0x000 0x2 0x0
#define MX53_PAD_EIM_D26__FIRI_RXD 0x144 0x48c 0x80c 0x3 0x0
#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 0x144 0x48c 0x000 0x4 0x0
@@ -533,6 +534,7 @@
#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0
#define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0
#define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX 0x148 0x490 0x000 0x2 0x0
#define MX53_PAD_EIM_D27__FIRI_TXD 0x148 0x490 0x000 0x3 0x0
#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 0x148 0x490 0x000 0x4 0x0
#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 0x148 0x490 0x000 0x5 0x0
@@ -541,6 +543,7 @@
#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x14c 0x494 0x000 0x0 0x0
#define MX53_PAD_EIM_D28__GPIO3_28 0x14c 0x494 0x000 0x1 0x0
#define MX53_PAD_EIM_D28__UART2_CTS 0x14c 0x494 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS 0x14c 0x494 0x87c 0x2 0x0
#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 0x14c 0x494 0x82c 0x3 0x1
#define MX53_PAD_EIM_D28__CSPI_MOSI 0x14c 0x494 0x788 0x4 0x1
#define MX53_PAD_EIM_D28__I2C1_SDA 0x14c 0x494 0x818 0x5 0x1
@@ -548,6 +551,7 @@
#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 0x14c 0x494 0x000 0x7 0x0
#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x150 0x498 0x000 0x0 0x0
#define MX53_PAD_EIM_D29__GPIO3_29 0x150 0x498 0x000 0x1 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS 0x150 0x498 0x000 0x2 0x0
#define MX53_PAD_EIM_D29__UART2_RTS 0x150 0x498 0x87c 0x2 0x1
#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 0x150 0x498 0x000 0x3 0x0
#define MX53_PAD_EIM_D29__CSPI_SS0 0x150 0x498 0x78c 0x4 0x2
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 2e516f4985e4..8bf0d89cdd35 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -433,6 +433,15 @@
clock-names = "ipg", "per";
};
+ srtc: srtc@53fa4000 {
+ compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <24>;
+ interrupt-parent = <&tzic>;
+ clocks = <&clks IMX5_CLK_SRTC_GATE>;
+ clock-names = "ipg";
+ };
+
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
index a2e0b73fdd4a..5f9f8948100d 100644
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
@@ -17,3 +17,61 @@
model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
};
+
+&i2c3 {
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu1_csi1_mux: endpoint {
+ remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+ bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+ bus-width = <8>;
+};
+
+&ipu1_csi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ipu1_csi1: ipu1_csi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0
+ MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0
+ MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0
+ MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0
+ MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
index 6844b708d2f8..9bfc620d37bd 100644
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -17,3 +17,61 @@
model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
};
+
+&i2c3 {
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu1_csi1_mux: endpoint {
+ remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+ bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+ bus-width = <8>;
+};
+
+&ipu1_csi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ipu1_csi1: ipu1_csi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0
+ MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0
+ MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0
+ MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0
+ MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
index be915412f852..b909bdf9a2ef 100644
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
@@ -17,3 +17,61 @@
model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
};
+
+&i2c3 {
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu1_csi1_mux: endpoint {
+ remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+ bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+ bus-width = <8>;
+};
+
+&ipu1_csi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ipu1_csi1: ipu1_csi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b0
+ MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b0
+ MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b0
+ MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b0
+ MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 29b45f2e64e0..275c6c05219d 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -101,6 +101,51 @@
status = "okay";
};
+&gpio1 {
+ gpio-line-names =
+ "", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
+ "I2C3_SDA", "I2C4_SCL",
+ "I2C4_SDA", "", "", "", "", "", "", "",
+ "", "PWM3", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "USB_OTG_VBUS", "",
+ "UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+ "UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
+ "GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
+ "CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
+ "CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
+ "CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
+ "GPIO5_07",
+ "GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
+ "CSPI2_CS0", "CSPI2_CLK", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+ gpio-line-names =
+ "SD3_CD", "SD3_WP", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
new file mode 100644
index 000000000000..4bbfe3d61027
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -0,0 +1,278 @@
+/*
+ * Copyright 2014-2017 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+ model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
+ compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
+ "fsl,imx6q";
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c3;
+ i2c2 = &i2c2;
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ wakeup {
+ label = "Wake-Up";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di1_disp1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu";
+ backlight = <&backlight>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ reg_pcie_switch: regulator-pcie-switch {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie_switch";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ status = "okay";
+ };
+};
+
+&backlight {
+ brightness-levels = <0 127 191 223 239 247 251 255>;
+ default-brightness-level = <1>;
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+ status = "okay";
+
+ pcie-switch@58 {
+ compatible = "plx,pex8605";
+ reg = <0x58>;
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc_i2c: rtc@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+ status = "okay";
+};
+
+&ipu1_di1_disp1 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+};
+
+&pcie {
+ /* active-high meaning opposite of regular PERST# active-low polarity */
+ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpio-active-high;
+ vpcie-supply = <&reg_pcie_switch>;
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&reg_usb_otg_vbus {
+ status = "okay";
+};
+
+&reg_usb_host_vbus {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sound_spdif {
+ status = "okay";
+};
+
+&spdif {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_host_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+ cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&iomuxc {
+ /*
+ * Mux the Apalis GPIOs
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+ &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+ &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+ &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+ >;
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
new file mode 100644
index 000000000000..a35c7a54ad3b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -0,0 +1,291 @@
+/*
+ * Copyright 2014-2017 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+ model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
+ compatible = "toradex,apalis_imx6q-ixora-v1.1",
+ "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+ "fsl,imx6q";
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c3;
+ i2c2 = &i2c2;
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ wakeup {
+ label = "Wake-Up";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ lcd_display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di1_disp1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu";
+ backlight = <&backlight>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds_ixora>;
+
+ led4-green {
+ label = "LED_4_GREEN";
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led4-red {
+ label = "LED_4_RED";
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led5-green {
+ label = "LED_5_GREEN";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led5-red {
+ label = "LED_5_RED";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&backlight {
+ brightness-levels = <0 127 191 223 239 247 251 255>;
+ default-brightness-level = <1>;
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc_i2c: rtc@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+ status = "okay";
+};
+
+&ipu1_di1_disp1 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+};
+
+&pcie {
+ /* active-high meaning opposite of regular PERST# active-low polarity */
+ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpio-active-high;
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&reg_usb_otg_vbus {
+ status = "okay";
+};
+
+&reg_usb_host_vbus {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sound_spdif {
+ status = "okay";
+};
+
+&spdif {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_host_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+ cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&iomuxc {
+ /*
+ * Mux the Apalis GPIOs
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+ &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+ &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+ &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+ >;
+
+ pinctrl_leds_ixora: ledsixoragrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 88cc7f51a4e9..60d33e99de76 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Toradex AG
+ * Copyright 2014-2017 Toradex AG
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
@@ -55,13 +55,9 @@
"fsl,imx6q";
aliases {
- i2c0 = &i2cddc;
- i2c1 = &i2c1;
+ i2c0 = &i2c1;
+ i2c1 = &i2c3;
i2c2 = &i2c2;
- i2c3 = &i2c3;
- };
-
- aliases {
rtc0 = &rtc_i2c;
rtc1 = &snvs_rtc;
};
@@ -164,15 +160,10 @@
};
&hdmi {
- ddc-i2c-bus = <&i2cddc>;
- status = "okay";
-};
-
-&i2cddc {
status = "okay";
};
-/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
&i2c1 {
status = "okay";
@@ -188,6 +179,14 @@
};
};
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+ status = "okay";
+};
+
&ipu1_di1_disp1 {
remote-endpoint = <&lcd_display_in>;
};
@@ -268,16 +267,13 @@
/* SD1 */
&usdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sd_cd>;
+ pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
status = "okay";
};
&iomuxc {
- /*
- * Mux the Apalis GPIOs
- * GPIO5, 6 used by optional fusion_F0710A kernel module
- */
+ /* Mux the Apalis GPIOs */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
&pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 2c1e98e0cf7b..46bdc6722715 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -57,7 +57,7 @@
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
- <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>;
+ <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index c90b26f00e24..1015e55ca8f7 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -111,6 +111,11 @@
};
&i2c1 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+
pca9547: mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
@@ -261,6 +266,43 @@
};
};
+&i2c2 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c3 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+};
+
+&iomuxc {
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
+ >;
+ };
+};
+
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
index a12c47e5ee05..0b8ae007ad73 100644
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
@@ -18,6 +18,64 @@
compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
};
+&i2c3 {
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+ bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+ bus-width = <8>;
+};
+
+&ipu2_csi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&iomuxc {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ipu2_csi1: ipu2_csi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0
+ MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0
+ MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0
+ MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0
+ MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
+ >;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
index d76aaa83dad0..a56ef77eff3f 100644
--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
@@ -18,6 +18,64 @@
compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
};
+&i2c3 {
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+ bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+ bus-width = <8>;
+};
+
+&ipu2_csi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
&sata {
status = "okay";
};
+
+&iomuxc {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ipu2_csi1: ipu2_csi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0
+ MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0
+ MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0
+ MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0
+ MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
index 6e8f53e92a2d..56e5b5050fcf 100644
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -18,6 +18,64 @@
compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
};
+&i2c3 {
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+ bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+ bus-width = <8>;
+};
+
+&ipu2_csi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
&sata {
status = "okay";
};
+
+&iomuxc {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0001b0b0
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ipu2_csi1: ipu2_csi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b0
+ MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b0
+ MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b0
+ MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b0
+ MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b0
+ MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index ba01dd76d887..ea339fa58f4a 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Toradex AG
+ * Copyright 2014-2017 Toradex AG
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
@@ -56,18 +56,6 @@
status = "disabled";
};
- /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
- i2cddc: i2c@0 {
- compatible = "i2c-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c_ddc>;
- gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
- &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
- >;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- status = "disabled";
- };
-
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
@@ -210,10 +198,13 @@
};
};
-/*
- * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
- * board)
- */
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_ddc>;
+ status = "disabled";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -374,7 +365,8 @@
};
/*
- * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
*/
&i2c3 {
clock-frequency = <100000>;
@@ -460,7 +452,7 @@
/* MMC1 */
&usdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
vqmmc-supply = <&reg_3p3v>;
bus-width = <8>;
voltage-ranges = <3300 3300>;
@@ -640,11 +632,10 @@
>;
};
- pinctrl_i2c_ddc: gpioi2cddcgrp {
+ pinctrl_hdmi_ddc: hdmiddcgrp {
fsl,pins = <
- /* DDC bitbang */
- MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
- MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
+ MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
>;
};
@@ -912,7 +903,7 @@
>;
};
- pinctrl_usdhc1: usdhc1grp {
+ pinctrl_usdhc1_4bit: usdhc1grp_4bit {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
@@ -920,6 +911,11 @@
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc1_8bit: usdhc1grp_8bit {
+ fsl,pins = <
MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index e8c1edc82e6e..885556260bd0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -231,6 +231,37 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+ bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+ bus-width = <8>;
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
};
&pcie {
@@ -302,6 +333,13 @@
&iomuxc {
imx6qdl-gw51xx {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
@@ -372,6 +410,22 @@
>;
};
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ >;
+ };
+
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 91991d63a69c..115d706228ef 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -377,7 +377,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 5bc6ed1a5b35..24be7965056c 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -368,7 +368,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 66fcf838e964..4594b2279169 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -416,7 +416,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index 57374dddf98d..1a0faa1a14c8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -261,6 +261,37 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+
+ adv7180: camera@20 {
+ compatible = "adi,adv7180";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adv7180>;
+ reg = <0x20>;
+ powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+ port {
+ adv7180_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ };
+ };
+ };
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+ bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+ bus-width = <8>;
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
};
&pcie {
@@ -340,6 +371,13 @@
};
&iomuxc {
+ pinctrl_adv7180: adv7180grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0
+ >;
+ };
+
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
@@ -387,6 +425,22 @@
>;
};
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ >;
+ };
+
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 5fab5be414fe..7ca291e9dbdb 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -184,7 +184,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index f22e5879340b..d309a4d0eb08 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -108,6 +108,18 @@
startup-delay-us = <70000>;
enable-active-high;
};
+
+ reg_usb_h1_vbus: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
gpio-keys {
@@ -515,6 +527,12 @@
>;
};
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
@@ -629,6 +647,7 @@
};
&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index afe7449c47da..756c5054f047 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -123,6 +123,18 @@
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
+
+ reg_usb_h1_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
mipi_xclk: mipi_xclk {
@@ -610,6 +622,12 @@
>;
};
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
@@ -705,6 +723,7 @@
};
&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 5d94b5ee6aa0..eeb7679fd348 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -59,6 +59,14 @@
pinctrl-0 = <&pinctrl_mdio1>;
gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
&gpio6 4 GPIO_ACTIVE_HIGH>;
+
+ phy: ethernet-phy@0 {
+ pinctrl-0 = <&pinctrl_rmii_phy_irq>;
+ pinctrl-names = "default";
+ reg = <0>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
};
reg_28p0v: regulator-28p0v {
@@ -615,14 +623,106 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rmii";
+ phy-handle = <&phy>;
phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
phy-supply = <&reg_3p3v>;
status = "okay";
- fixed-link {
- speed = <100>;
- full-duplex;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ switch: switch@0 {
+ compatible = "marvell,mv88e6085";
+ pinctrl-0 = <&pinctrl_switch_irq>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ dsa,member = <0 0>;
+ eeprom-length = <512>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "gigabit_proc";
+ phy-handle = <&switchphy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "netaux";
+ phy-handle = <&switchphy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "cpu";
+ ethernet = <&fec>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "netright";
+ phy-handle = <&switchphy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "netleft";
+ phy-handle = <&switchphy4>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switchphy0: switchphy@0 {
+ reg = <0>;
+ interrupt-parent = <&switch>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy1: switchphy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy2: switchphy@2 {
+ reg = <2>;
+ interrupt-parent = <&switch>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy3: switchphy@3 {
+ reg = <3>;
+ interrupt-parent = <&switch>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switchphy4: switchphy@4 {
+ reg = <4>;
+ interrupt-parent = <&switch>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
};
};
@@ -840,6 +940,12 @@
>;
};
+ pinctrl_switch_irq: switchgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x4001b000
+ >;
+ };
+
pinctrl_tc358767: tc358767grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index a9723b94bafa..8884b4a3cafb 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -769,6 +769,7 @@
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3243af4a9984..3f76f980947e 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -655,6 +655,7 @@
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index f16b9df9d0c6..6c7eb54be9e2 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -710,6 +710,7 @@
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index d2be8aa3370b..9c23e017d86a 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -22,7 +22,7 @@
reg = <0x80000000 0x20000000>;
};
- backlight {
+ backlight_display: backlight-display {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -78,6 +78,17 @@
clocks = <&clks IMX6UL_CLK_SAI2>;
};
};
+
+ panel {
+ compatible = "innolux,at043tn24";
+ backlight = <&backlight_display>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&clks {
@@ -139,31 +150,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
- display = <&display0>;
status = "okay";
- display0: display {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
-
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <8>;
- hback-porch = <4>;
- hsync-len = <41>;
- vback-porch = <2>;
- vfront-porch = <4>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -316,7 +307,6 @@
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
- MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059
>;
};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dts
index eb94d956808b..571eea7f1c6b 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dtsi
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -40,11 +40,16 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+/dts-v1/;
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "imx6ul.dtsi"
/ {
+ model = "Engicam GEAM6UL Starter Kit";
+ compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
memory {
reg = <0x80000000 0x08000000>;
};
@@ -87,18 +92,46 @@
regulator-always-on;
regulator-boot-on;
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6ul-geam-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ };
+ };
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_3p3v>;
+ status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_3p3v>;
+ status = "okay";
};
&fec1 {
@@ -144,6 +177,16 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6UL_CLK_OSC>;
+ clock-names = "mclk";
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ VDDD-supply = <&reg_1p8v>;
+ };
};
&i2c2 {
@@ -158,6 +201,31 @@
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <28000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <30>;
+ hback-porch = <30>;
+ hsync-len = <64>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ vsync-len = <20>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
};
&pwm8 {
@@ -178,6 +246,12 @@
status = "okay";
};
+&tsc {
+ measure-delay-time = <0x1ffff>;
+ pre-charge-time = <0x1fff>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
deleted file mode 100644
index 2beaab6e272e..000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-&i2c1 {
- stmpe811: gpio-expander@44 {
- compatible = "st,stmpe811";
- reg = <0x44>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_stmpe>;
- interrupt-parent = <&gpio1>;
- interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- stmpe: touchscreen {
- compatible = "st,stmpe-ts";
- st,sample-time = <4>;
- st,mod-12b = <1>;
- st,ref-sel = <0>;
- st,adc-freq = <1>;
- st,ave-ctrl = <1>;
- st,touch-det-delay = <2>;
- st,settling = <2>;
- st,fraction-z = <7>;
- st,i-drive = <1>;
- };
- };
-};
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif_dat
- &pinctrl_lcdif_ctrl>;
- display = <&display0>;
- status = "okay";
-
- display0: display {
- bits-per-pixel = <16>;
- bus-width = <18>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <28000000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <30>;
- hback-porch = <30>;
- hsync-len = <64>;
- vback-porch = <5>;
- vfront-porch = <5>;
- vsync-len = <20>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&iomuxc {
- pinctrl_lcdif_ctrl: lcdifctrlgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
- >;
- };
-
- pinctrl_lcdif_dat: lcdifdatgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
- >;
- };
-
- pinctrl_stmpe: stmpegrp {
- fsl,pins = <
- MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
index 73a1d0f0b9d5..f5b422898e61 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -43,7 +43,6 @@
/dts-v1/;
#include "imx6ul-isiot.dtsi"
-#include "imx6ul-isiot-common.dtsi"
/ {
model = "Engicam Is.IoT MX6UL eMMC Starter kit";
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
index da29a86eb6a8..de15e1c75dd1 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -43,7 +43,6 @@
/dts-v1/;
#include "imx6ul-isiot.dtsi"
-#include "imx6ul-isiot-common.dtsi"
/ {
model = "Engicam Is.IoT MX6UL NAND Starter kit";
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index ea30380ad7a4..950fb28b630a 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -69,6 +69,68 @@
100>;
default-brightness-level = <100>;
};
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6ul-isiot-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
};
&i2c1 {
@@ -76,6 +138,42 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6UL_CLK_OSC>;
+ clock-names = "mclk";
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ VDDD-supply = <&reg_1p8v>;
+ };
+
+ stmpe811: gpio-expander@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ stmpe: touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
};
&i2c2 {
@@ -85,6 +183,38 @@
status = "okay";
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <28000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <30>;
+ hback-porch = <30>;
+ hsync-len = <64>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ vsync-len = <20>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
&pwm8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm8>;
@@ -115,6 +245,21 @@
};
&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
@@ -129,6 +274,38 @@
>;
};
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
pinctrl_pwm8: pwm8grp {
fsl,pins = <
MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
@@ -145,6 +322,12 @@
>;
};
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts
index ed1d891d6a89..1d863a16bcf0 100644
--- a/arch/arm/boot/dts/imx6ul-liteboard.dts
+++ b/arch/arm/boot/dts/imx6ul-liteboard.dts
@@ -124,6 +124,10 @@
};
};
+&snvs_poweroff {
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 6da2b77edd46..f11a241a340d 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -614,6 +614,7 @@
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index d7753f79937a..0a3915868aa3 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -106,6 +106,15 @@
fsl,magic-packet;
};
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ fsl,use-minimum-ecc;
+ nand-on-flash-bbt;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 0a24d1bf3c39..44637cabcc56 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -117,6 +117,37 @@
regulator-max-microvolt = <3300000>;
startup-delay-us = <200000>;
};
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator-can2-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-3v3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ panel {
+ compatible = "innolux,at043tn24";
+ pinctrl-0 = <&pinctrl_backlight>;
+ enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_lcd_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&adc1 {
@@ -168,6 +199,7 @@
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
fsl,magic-packet;
+ phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
@@ -197,6 +229,13 @@
status = "okay";
};
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&reg_can2_3v3>;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -285,8 +324,8 @@
};
vgen6_reg: vldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
@@ -322,31 +361,11 @@
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
- display = <&display0>;
status = "okay";
- display0: display {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
-
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <8>;
- hback-porch = <4>;
- hsync-len = <41>;
- vback-porch = <2>;
- vfront-porch = <4>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -356,12 +375,6 @@
status = "okay";
};
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
-};
-
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -488,6 +501,20 @@
>;
};
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ >;
+ };
+
+ pinctrl_flexcan2_reg: flexcan2reggrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
+ >;
+ };
+
+
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
@@ -701,9 +728,9 @@
>;
};
- pinctrl_pwm1: pwm1grp {
+ pinctrl_backlight: backlightgrp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0
>;
};
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 4cf6c458b583..82ad26e766eb 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -540,6 +540,7 @@
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
};
@@ -1021,5 +1022,36 @@
status = "disabled";
};
};
+
+ dma_apbh: dma-apbh@33000000 {
+ compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x33000000 0x2000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+ };
+
+ gpmi: gpmi-nand@33002000{
+ compatible = "fsl,imx7d-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
+ clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
+ <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+ clock-names = "gpmi_io", "gpmi_bch_apb";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
+ };
};
};
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index ae1ebe7ee021..f1f32c54e72f 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -16,6 +16,19 @@
compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
model = "Texas Instruments Keystone 2 Edison EVM";
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
soc {
clocks {
@@ -160,3 +173,8 @@
reg = <1>;
};
};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 0dd4cdd6d40c..819ab8345916 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,6 +45,10 @@
};
};
+ aliases {
+ rproc0 = &dsp0;
+ };
+
soc {
/include/ "keystone-k2e-clocks.dtsi"
@@ -114,6 +118,22 @@
gpio,syscon-dev = <&devctrl 0x240>;
};
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2e-dsp";
+ reg = <0x10800000 0x00080000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem0>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&pscrst 0>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
pcie1: pcie@21020000 {
compatible = "ti,keystone-pcie","snps,dw-pcie";
clocks = <&clkpcie1>;
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 61883cb969d2..f462f1043531 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -25,6 +25,26 @@
reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
+ vcc3v3_dcin_reg: fixedregulator-vcc3v3-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc0_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
&k2g_pinctrl {
@@ -34,6 +54,33 @@
K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
+
+ mmc0_pins: pinmux_mmc0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat3.mmc0_dat3 */
+ K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat2.mmc0_dat2 */
+ K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat1.mmc0_dat1 */
+ K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat0.mmc0_dat0 */
+ K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_clk.mmc0_clk */
+ K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_cmd.mmc0_cmd */
+ K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc0_sdcd.gpio1_12 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat7.mmc1_dat7 */
+ K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat6.mmc1_dat6 */
+ K2G_CORE_IOPAD(0x10f4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat5.mmc1_dat5 */
+ K2G_CORE_IOPAD(0x10f8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat4.mmc1_dat4 */
+ K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ >;
+ };
};
&uart0 {
@@ -41,3 +88,27 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&vcc3v3_dcin_reg>;
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+ status = "okay";
+};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index d820d37b5148..78692745e0af 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -17,6 +17,19 @@
device_type = "memory";
reg = <0x00000008 0x00000000 0x00000000 0x20000000>;
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
};
&k2g_pinctrl {
@@ -33,3 +46,8 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index a789f75a1ed5..826b286665e6 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/keystone.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ti,k2g","ti,keystone";
@@ -27,6 +28,7 @@
aliases {
serial0 = &uart0;
+ rproc0 = &dsp0;
};
cpus {
@@ -113,6 +115,24 @@
status = "disabled";
};
+ dcan0: can@0260B200 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ reg = <0x0260B200 0x200>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0008>;
+ clocks = <&k2g_clks 0x0008 1>;
+ };
+
+ dcan1: can@0260B400 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ reg = <0x0260B400 0x200>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ power-domains = <&k2g_pds 0x0009>;
+ clocks = <&k2g_clks 0x0009 1>;
+ };
+
kirq0: keystone_irq@026202a0 {
compatible = "ti,keystone-irq";
interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
@@ -128,6 +148,22 @@
gpio,syscon-dev = <&devctrl 0x240>;
};
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2g-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ power-domains = <&k2g_pds 0x0046>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&k2g_reset 0x0046 0x1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
msgmgr: msgmgr@02a00000 {
compatible = "ti,k2g-message-manager";
#mbox-cells = <2>;
@@ -139,5 +175,173 @@
interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ pmmc: pmmc@02921c00 {
+ compatible = "ti,k2g-sci";
+ /*
+ * In case of rare platforms that does not use k2g as
+ * system master, use /delete-property/
+ */
+ ti,system-reboot-controller;
+ mbox-names = "rx", "tx";
+ mboxes= <&msgmgr 5 2>,
+ <&msgmgr 0 0>;
+ reg-names = "debug_messages";
+ reg = <0x02921c00 0x400>;
+
+ k2g_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k2g_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k2g_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ gpio0: gpio@2603000 {
+ compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+ reg = <0x02603000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <144>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k2g_clks 0x001b 0x0>;
+ clock-names = "gpio";
+ };
+
+ gpio1: gpio@260a000 {
+ compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+ reg = <0x0260a000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <68>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k2g_clks 0x001c 0x0>;
+ clock-names = "gpio";
+ };
+
+ edma0: edma@02700000 {
+ compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+ reg = <0x02700000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+
+ ti,edma-memcpy-channels = <32 33 34 35>;
+
+ power-domains = <&k2g_pds 0x3f>;
+ };
+
+ edma0_tptc0: tptc@02760000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x02760000 0x400>;
+ power-domains = <&k2g_pds 0x3f>;
+ };
+
+ edma0_tptc1: tptc@02768000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x02768000 0x400>;
+ power-domains = <&k2g_pds 0x3f>;
+ };
+
+ edma1: edma@02728000 {
+ compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+ reg = <0x02728000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
+
+ /*
+ * memcpy is disabled, can be enabled with:
+ * ti,edma-memcpy-channels = <12 13 14 15>;
+ * for example.
+ */
+
+ power-domains = <&k2g_pds 0x4f>;
+ };
+
+ edma1_tptc0: tptc@027b0000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b0000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+ };
+
+ edma1_tptc1: tptc@027b8000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b8000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+ };
+
+ mmc0: mmc@23000000 {
+ compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ reg = <0x23000000 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+ dmas = <&edma1 24 0>, <&edma1 25 0>;
+ dma-names = "tx", "rx";
+ bus-width = <4>;
+ ti,needs-special-reset;
+ no-1-8-v;
+ max-frequency = <96000000>;
+ power-domains = <&k2g_pds 0xb>;
+ clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
+ clock-names = "fck", "mmchsdb_fck";
+ status = "disabled";
+ };
+
+ mmc1: mmc@23100000 {
+ compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ reg = <0x23100000 0x400>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+ dmas = <&edma1 26 0>, <&edma1 27 0>;
+ dma-names = "tx", "rx";
+ bus-width = <8>;
+ ti,needs-special-reset;
+ ti,non-removable;
+ max-frequency = <96000000>;
+ power-domains = <&k2g_pds 0xc>;
+ clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
+ clock-names = "fck", "mmchsdb_fck";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 2156ff92d08f..6dd13b98aaba 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -16,6 +16,19 @@
compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
soc {
clocks {
refclksys: refclksys {
@@ -184,3 +197,43 @@
reg = <1>;
};
};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp1 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp2 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp3 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp4 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp5 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp6 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp7 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 69d449430511..31dc00e4e5fd 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -45,6 +45,17 @@
};
};
+ aliases {
+ rproc0 = &dsp0;
+ rproc1 = &dsp1;
+ rproc2 = &dsp2;
+ rproc3 = &dsp3;
+ rproc4 = &dsp4;
+ rproc5 = &dsp5;
+ rproc6 = &dsp6;
+ rproc7 = &dsp7;
+ };
+
soc {
/include/ "keystone-k2hk-clocks.dtsi"
@@ -134,6 +145,134 @@
gpio,syscon-dev = <&devctrl 0x25c>;
};
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem0>;
+ ti,syscon-dev = <&devctrl 0x40>;
+ resets = <&pscrst 0>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
+ dsp1: dsp@11800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x11800000 0x00100000>,
+ <0x11e00000 0x00008000>,
+ <0x11f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem1>;
+ ti,syscon-dev = <&devctrl 0x44>;
+ resets = <&pscrst 1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <1 9>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio1 27 0>;
+ status = "disabled";
+ };
+
+ dsp2: dsp@12800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x12800000 0x00100000>,
+ <0x12e00000 0x00008000>,
+ <0x12f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem2>;
+ ti,syscon-dev = <&devctrl 0x48>;
+ resets = <&pscrst 2>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <2 10>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio2 27 0>;
+ status = "disabled";
+ };
+
+ dsp3: dsp@13800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x13800000 0x00100000>,
+ <0x13e00000 0x00008000>,
+ <0x13f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem3>;
+ ti,syscon-dev = <&devctrl 0x4c>;
+ resets = <&pscrst 3>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <3 11>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio3 27 0>;
+ status = "disabled";
+ };
+
+ dsp4: dsp@14800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x14800000 0x00100000>,
+ <0x14e00000 0x00008000>,
+ <0x14f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem4>;
+ ti,syscon-dev = <&devctrl 0x50>;
+ resets = <&pscrst 4>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <4 12>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio4 27 0>;
+ status = "disabled";
+ };
+
+ dsp5: dsp@15800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x15800000 0x00100000>,
+ <0x15e00000 0x00008000>,
+ <0x15f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem5>;
+ ti,syscon-dev = <&devctrl 0x54>;
+ resets = <&pscrst 5>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <5 13>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio5 27 0>;
+ status = "disabled";
+ };
+
+ dsp6: dsp@16800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x16800000 0x00100000>,
+ <0x16e00000 0x00008000>,
+ <0x16f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem6>;
+ ti,syscon-dev = <&devctrl 0x58>;
+ resets = <&pscrst 6>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <6 14>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio6 27 0>;
+ status = "disabled";
+ };
+
+ dsp7: dsp@17800000 {
+ compatible = "ti,k2hk-dsp";
+ reg = <0x17800000 0x00100000>,
+ <0x17e00000 0x00008000>,
+ <0x17f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem7>;
+ ti,syscon-dev = <&devctrl 0x5c>;
+ resets = <&pscrst 7>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <7 15>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio7 27 0>;
+ status = "disabled";
+ };
+
mdio: mdio@02090300 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 056b42f99d7a..528667618db4 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -16,6 +16,19 @@
compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
model = "Texas Instruments Keystone 2 Lamarr EVM";
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_common_memory: dsp-common-memory@81f800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+ reusable;
+ status = "okay";
+ };
+ };
+
soc {
clocks {
refclksys: refclksys {
@@ -133,3 +146,23 @@
reg = <1>;
};
};
+
+&dsp0 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp1 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp2 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
+
+&dsp3 {
+ memory-region = <&dsp_common_memory>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 148650406cf7..4431310bc922 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -33,6 +33,13 @@
};
};
+ aliases {
+ rproc0 = &dsp0;
+ rproc1 = &dsp1;
+ rproc2 = &dsp2;
+ rproc3 = &dsp3;
+ };
+
soc {
/include/ "keystone-k2l-clocks.dtsi"
@@ -268,6 +275,70 @@
gpio,syscon-dev = <&devctrl 0x24c>;
};
+ dsp0: dsp@10800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x10800000 0x00100000>,
+ <0x10e00000 0x00008000>,
+ <0x10f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem0>;
+ ti,syscon-dev = <&devctrl 0x844>;
+ resets = <&pscrst 0>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <0 8>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio0 27 0>;
+ status = "disabled";
+ };
+
+ dsp1: dsp@11800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x11800000 0x00100000>,
+ <0x11e00000 0x00008000>,
+ <0x11f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem1>;
+ ti,syscon-dev = <&devctrl 0x848>;
+ resets = <&pscrst 1>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <1 9>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio1 27 0>;
+ status = "disabled";
+ };
+
+ dsp2: dsp@12800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x12800000 0x00100000>,
+ <0x12e00000 0x00008000>,
+ <0x12f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem2>;
+ ti,syscon-dev = <&devctrl 0x84c>;
+ resets = <&pscrst 2>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <2 10>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio2 27 0>;
+ status = "disabled";
+ };
+
+ dsp3: dsp@13800000 {
+ compatible = "ti,k2l-dsp";
+ reg = <0x13800000 0x00100000>,
+ <0x13e00000 0x00008000>,
+ <0x13f00000 0x00008000>;
+ reg-names = "l2sram", "l1pram", "l1dram";
+ clocks = <&clkgem3>;
+ ti,syscon-dev = <&devctrl 0x850>;
+ resets = <&pscrst 3>;
+ interrupt-parent = <&kirq0>;
+ interrupts = <3 11>;
+ interrupt-names = "vring", "exception";
+ kick-gpios = <&dspgpio3 27 0>;
+ status = "disabled";
+ };
+
mdio: mdio@26200f00 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index d573e03f3134..f003f3f1bd65 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -1,6 +1,6 @@
/ {
mbus@f1000000 {
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -24,6 +24,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 748d0b62f233..47d4b3d3d9e9 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,6 +1,6 @@
/ {
mbus@f1000000 {
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -24,6 +24,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index bb63d2d50fc5..a13dad0a7c08 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,6 +1,6 @@
/ {
mbus@f1000000 {
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -28,6 +28,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
@@ -45,6 +46,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 10>;
marvell,pcie-port = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 720c210d491d..90d4d71b6683 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -1,6 +1,6 @@
/ {
mbus@f1000000 {
- pciec: pcie-controller@82000000 {
+ pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -24,6 +24,7 @@
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 43e9364083de..b4575bbaf085 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -192,7 +192,7 @@
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins &mmc1_cd>;
- cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cap-power-off-card;
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 15204e44161d..cd6ad072e72c 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -86,14 +86,14 @@
};
uart_A: serial@84c0 {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
reg = <0x84c0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_B: serial@84dc {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
reg = <0x84dc 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
@@ -108,6 +108,20 @@
status = "disabled";
};
+ pwm_ab: pwm@8550 {
+ compatible = "amlogic,meson-pwm";
+ reg = <0x8550 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@8650 {
+ compatible = "amlogic,meson-pwm";
+ reg = <0x8650 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
saradc: adc@8680 {
compatible = "amlogic,meson-saradc";
reg = <0x8680 0x34>;
@@ -117,7 +131,7 @@
};
uart_C: serial@8700 {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
reg = <0x8700 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
@@ -182,7 +196,7 @@
};
uart_AO: serial@4c0 {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x4c0 0x18>;
interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
@@ -230,5 +244,13 @@
interrupt-names = "macirq";
status = "disabled";
};
+
+ ahb_sram: sram@d9000000 {
+ compatible = "mmio-sram";
+ reg = <0xd9000000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xd9000000 0x20000>;
+ };
};
}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index 8557b6117a4b..ef281d290052 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -70,9 +70,37 @@
};
};
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
clk81: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
};
}; /* end of / */
+
+
+&uart_AO {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+ clocks = <&xtal>, <&clk81>, <&clk81>;
+ clock-names = "xtal", "pclk", "baud";
+};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index cada35828931..b98d44fde6b6 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -168,10 +168,18 @@
&cbus {
clkc: clock-controller@4000 {
#clock-cells = <1>;
+ #reset-cells = <1>;
compatible = "amlogic,meson8-clkc";
reg = <0x8000 0x4>, <0x4000 0x460>;
};
+ pwm_ef: pwm@86c0 {
+ compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+ reg = <0x86c0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pinctrl_cbus: pinctrl@9880 {
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0x9880 0x10>;
@@ -270,6 +278,14 @@
arm,filter-ranges = <0x100000 0xc0000000>;
};
+&pwm_ab {
+ compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+ compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+};
+
&saradc {
compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
clocks = <&clkc CLKID_XTAL>,
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 72e4f425f190..bc278da7df0d 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -119,6 +119,7 @@
&cbus {
clkc: clock-controller@4000 {
#clock-cells = <1>;
+ #reset-cells = <1>;
compatible = "amlogic,meson8b-clkc";
reg = <0x8000 0x4>, <0x4000 0x460>;
};
@@ -129,20 +130,6 @@
#reset-cells = <1>;
};
- pwm_ab: pwm@8550 {
- compatible = "amlogic,meson8b-pwm";
- reg = <0x8550 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm@8650 {
- compatible = "amlogic,meson8b-pwm";
- reg = <0x8650 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson8b-pwm";
reg = <0x86c0 0x10>;
@@ -150,12 +137,6 @@
status = "disabled";
};
- wdt: watchdog@9900 {
- compatible = "amlogic,meson8b-wdt";
- reg = <0x9900 0x8>;
- interrupts = <0 0 1>;
- };
-
pinctrl_cbus: pinctrl@9880 {
compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0x9880 0x10>;
@@ -193,6 +174,14 @@
arm,filter-ranges = <0x100000 0xc0000000>;
};
+&pwm_ab {
+ compatible = "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+ compatible = "amlogic,meson8b-pwm";
+};
+
&saradc {
compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
clocks = <&clkc CLKID_XTAL>,
@@ -242,3 +231,7 @@
clock-names = "usb_general", "usb";
resets = <&reset RESET_USB_OTG>;
};
+
+&wdt {
+ compatible = "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index 1eb5da1dc8f0..4d61e5b1334a 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -255,5 +255,6 @@
regulator-min-microvolt = <2775000>;
regulator-max-microvolt = <2775000>;
regulator-enable-ramp-delay = <1000>;
+ regulator-initial-mode = <0x00>; /* NORMAL */
};
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index f1efdc63656a..afe12e5b51f9 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -13,6 +13,7 @@
*/
#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -533,6 +534,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
clocks = <&mmsys CLK_MM_SMI_LARB0>,
<&mmsys CLK_MM_SMI_LARB0>;
clock-names = "apb", "smi";
@@ -549,6 +551,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x15001000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
clocks = <&imgsys CLK_IMG_SMI_COMM>,
<&imgsys CLK_IMG_SMI_COMM>;
clock-names = "apb", "smi";
@@ -579,6 +582,7 @@
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x16010000 0 0x1000>;
mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
clocks = <&vdecsys CLK_VDEC_CKGEN>,
<&vdecsys CLK_VDEC_LARB>;
clock-names = "apb", "smi";
@@ -591,12 +595,114 @@
#clock-cells = <1>;
};
+ usb0: usb@1a1c0000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x1a1c0000 0 0x1000>,
+ <0 0x1a1c4700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ref_ck";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy0: usb-phy@1a1c4000 {
+ compatible = "mediatek,mt2701-u3phy";
+ reg = <0 0x1a1c4000 0 0x0700>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy@1a1c4800 {
+ reg = <0 0x1a1c4800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port0: usb-phy@1a1c4900 {
+ reg = <0 0x1a1c4900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ usb1: usb@1a240000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x1a240000 0 0x1000>,
+ <0 0x1a244700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ref_ck";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy1: usb-phy@1a244000 {
+ compatible = "mediatek,mt2701-u3phy";
+ reg = <0 0x1a244000 0 0x0700>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port1: usb-phy@1a244800 {
+ reg = <0 0x1a244800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port1: usb-phy@1a244900 {
+ reg = <0 0x1a244900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt2701-ethsys", "syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
};
+ eth: ethernet@1b100000 {
+ compatible = "mediatek,mt2701-eth", "syscon";
+ reg = <0 0x1b100000 0 0x20000>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <&ethsys CLK_ETHSYS_ESW>,
+ <&ethsys CLK_ETHSYS_GP1>,
+ <&ethsys CLK_ETHSYS_GP2>,
+ <&apmixedsys CLK_APMIXED_TRGPLL>;
+ clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+ resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+ <&ethsys MT2701_ETHSYS_GMAC_RST>,
+ <&ethsys MT2701_ETHSYS_PPE_RST>;
+ reset-names = "fe", "gmac", "ppe";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ mediatek,ethsys = <&ethsys>;
+ mediatek,pctl = <&syscfg_pctl_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
bdpsys: syscon@1c000000 {
compatible = "mediatek,mt2701-bdpsys", "syscon";
reg = <0 0x1c000000 0 0x1000>;
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
new file mode 100644
index 000000000000..7c783d6c750e
--- /dev/null
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -0,0 +1,241 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ * Sean Wang <sean.wang@mediatek.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323regulator: mt6323regulator{
+ compatible = "mediatek,mt6323-regulator";
+
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
deleted file mode 100644
index b60b41cad592..000000000000
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2016 MediaTek Inc.
- * Author: John Crispin <john@phrozen.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt7623.dtsi"
-
-/ {
- model = "MediaTek MT7623 evaluation board";
- compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
- chosen {
- stdout-path = &uart2;
- };
-
- memory {
- reg = <0 0x80000000 0 0x40000000>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d81158b2b02f..ec8a07415cb3 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -21,36 +21,99 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
#include "skeleton64.dtsi"
/ {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-98000000 {
+ opp-hz = /bits/ 64 <98000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-198000000 {
+ opp-hz = /bits/ 64 <198000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-398000000 {
+ opp-hz = /bits/ 64 <398000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-598000000 {
+ opp-hz = /bits/ 64 <598000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-747500000 {
+ opp-hz = /bits/ 64 <747500000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-1040000000 {
+ opp-hz = /bits/ 64 <1040000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1196000000 {
+ opp-hz = /bits/ 64 <1196000000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1300000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "mediatek,mt6589-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
+ clocks = <&infracfg CLK_INFRA_CPUSEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
+ clock-frequency = <1300000000>;
};
- cpu@1 {
+
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
- cpu@2 {
+
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
- cpu@3 {
+
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clock-frequency = <1300000000>;
};
};
@@ -74,6 +137,58 @@
clock-output-names = "clk26m";
};
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu_passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu_active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
@@ -172,7 +287,7 @@
clock-names = "spi", "wrap";
};
- cir: cir@0x10013000 {
+ cir: cir@10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -193,7 +308,7 @@
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
- reg = <0 0x10206000 0 0x1000>;
+ reg = <0 0x10206000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
thermal_calibration_data: calib@424 {
@@ -371,6 +486,31 @@
nvmem-cell-names = "calibration-data";
};
+ nandc: nfi@1100d000 {
+ compatible = "mediatek,mt7623-nfc",
+ "mediatek,mt2701-nfc";
+ reg = <0 0x1100d000 0 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+ clocks = <&pericfg CLK_PERI_NFI>,
+ <&pericfg CLK_PERI_NFI_PAD>;
+ clock-names = "nfi_clk", "pad_clk";
+ status = "disabled";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt7623-ecc",
+ "mediatek,mt2701-ecc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_ECC>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
spi1: spi@11016000 {
compatible = "mediatek,mt7623-spi",
"mediatek,mt2701-spi";
@@ -399,31 +539,6 @@
status = "disabled";
};
- nandc: nfi@1100d000 {
- compatible = "mediatek,mt7623-nfc",
- "mediatek,mt2701-nfc";
- reg = <0 0x1100d000 0 0x1000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
- clocks = <&pericfg CLK_PERI_NFI>,
- <&pericfg CLK_PERI_NFI_PAD>;
- clock-names = "nfi_clk", "pad_clk";
- status = "disabled";
- ecc-engine = <&bch>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- bch: ecc@1100e000 {
- compatible = "mediatek,mt7623-ecc",
- "mediatek,mt2701-ecc";
- reg = <0 0x1100e000 0 0x1000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_NFI_ECC>;
- clock-names = "nfiecc_clk";
- status = "disabled";
- };
-
afe: audio-controller@11220000 {
compatible = "mediatek,mt7623-audio",
"mediatek,mt2701-audio";
@@ -538,13 +653,22 @@
compatible = "mediatek,mt7623-mmc",
"mediatek,mt8135-mmc";
reg = <0 0x11240000 0 0x1000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_1>,
<&topckgen CLK_TOP_MSDC30_1_SEL>;
clock-names = "source", "hclk";
status = "disabled";
};
+ hifsys: syscon@1a000000 {
+ compatible = "mediatek,mt7623-hifsys",
+ "mediatek,mt2701-hifsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
usb1: usb@1a1c0000 {
compatible = "mediatek,mt7623-xhci",
"mediatek,mt8173-xhci";
@@ -561,7 +685,8 @@
};
u3phy1: usb-phy@1a1c4000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -599,7 +724,8 @@
};
u3phy2: usb-phy@1a244000 {
- compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ compatible = "mediatek,mt7623-u3phy",
+ "mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
clocks = <&clk26m>;
clock-names = "u3phya_ref";
@@ -621,15 +747,6 @@
};
};
- hifsys: syscon@1a000000 {
- compatible = "mediatek,mt7623-hifsys",
- "mediatek,mt2701-hifsys",
- "syscon";
- reg = <0 0x1a000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7623-ethsys",
"mediatek,mt2701-ethsys",
@@ -639,7 +756,9 @@
};
eth: ethernet@1b100000 {
- compatible = "mediatek,mt2701-eth", "syscon";
+ compatible = "mediatek,mt7623-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
reg = <0 0x1b100000 0 0x20000>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
@@ -650,6 +769,10 @@
<&ethsys CLK_ETHSYS_GP2>,
<&apmixedsys CLK_APMIXED_TRGPLL>;
clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+ resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+ <&ethsys MT2701_ETHSYS_GMAC_RST>,
+ <&ethsys MT2701_ETHSYS_PPE_RST>;
+ reset-names = "fe", "gmac", "ppe";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
mediatek,ethsys = <&ethsys>;
mediatek,pctl = <&syscfg_pctl_a>;
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 000000000000..688a86378cee
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,487 @@
+/*
+ * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ model = "Bananapi BPI-R2";
+ compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu@3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ blue {
+ label = "bpi-r2:pio:blue";
+ gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green {
+ label = "bpi-r2:pio:green";
+ gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red {
+ label = "bpi-r2:pio:red";
+ gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cir_pins_a>;
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ pinctrl-names = "default";
+ reset-gpios = <&pio 33 0>;
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan0";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <&mt6323_vemc3v3_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ cd-gpios = <&pio 261 0>;
+ vmmc-supply = <&mt6323_vmch_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&pio {
+ cir_pins_a:cir@0 {
+ pins_cir {
+ pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins_a: i2c@0 {
+ pins_i2c0 {
+ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c@1 {
+ pin_i2c1 {
+ pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+ <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2s0_pins_a: i2s@0 {
+ pin_i2s0 {
+ pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+ <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+ <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+ <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+ <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ i2s1_pins_a: i2s@1 {
+ pin_i2s1 {
+ pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+ <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+ <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+ <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+ <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ key_pins_a: keys@0 {
+ pins_keys {
+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+ input-enable;
+ };
+ };
+
+ led_pins_a: leds@0 {
+ pins_leds {
+ pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+ <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+ <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+
+ pins_wp {
+ pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_insert {
+ pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ pwm_pins_a: pwm@0 {
+ pins_pwm {
+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+ };
+ };
+
+ spi0_pins_a: spi@0 {
+ pins_spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ uart0_pins_a: uart@0 {
+ pins_dat {
+ pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+ <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins_a: uart@1 {
+ pins_dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&pwrap {
+ mt6323 {
+ mt6323led: led {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "bpi-r2:isink:green";
+ default-state = "off";
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "bpi-r2:isink:red";
+ default-state = "off";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "bpi-r2:isink:blue";
+ default-state = "off";
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "disabled";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
+
+&usb2 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
new file mode 100644
index 000000000000..17c578f0d261
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623n-rfb.dtsi"
+
+/ {
+ model = "MediaTek MT7623N NAND reference board";
+ compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+};
+
+&bch {
+ status = "okay";
+};
+
+&nandc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+
+ nand@0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition@C0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition@2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition@4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition@5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&pio {
+ nand_pins_default: nanddefault {
+ pins_ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins_we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
new file mode 100644
index 000000000000..256c5fd947bf
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ * Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ cpus {
+ cpu0 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu1 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu2 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+
+ cpu3 {
+ proc-supply = <&mt6323_vproc_reg>;
+ };
+ };
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&mt6323_vemc3v3_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+ vmmc-supply = <&mt6323_vmch_reg>;
+ vqmmc-supply = <&mt6323_vmc_reg>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 673cee2234b2..683b96a8f73e 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -299,7 +299,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 4be85ce59dd1..4d2eaf843fa9 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -283,7 +283,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 53ae04f9104d..3d293b345e99 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&wl12xx_vmmc2>;
- vmmc_aux-supply = <&wl12xx_vaux2>;
+ vqmmc-supply = <&wl12xx_vaux2>;
non-removable;
bus-width = <4>;
cap-power-off-card;
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 2294f5b0aa10..bdf4b7fdda39 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -69,7 +69,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&wl12xx_vmmc2>;
- vmmc_aux-supply = <&wl12xx_vaux2>;
+ vqmmc-supply = <&wl12xx_vaux2>;
non-removable;
bus-width = <4>;
cap-power-off-card;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 82aa9c4a0f1c..0c0bb1b01b0b 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -149,7 +149,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 2b1d6977a535..ff35803088e3 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -115,7 +115,7 @@
&mmc1 {
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 49f37084e435..26c20e1167b9 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -144,6 +144,15 @@
io-channel-names = "temp", "bsi", "vbat";
};
+ rear_camera: camera@0 {
+ compatible = "linux,camera";
+
+ module {
+ model = "TCM8341MD";
+ sensor = <&cam1>;
+ };
+ };
+
pwm9: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
@@ -164,6 +173,31 @@
};
};
+&isp {
+ vdds_csib-supply = <&vaux2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_pins>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ csi_isp: endpoint {
+ remote-endpoint = <&csi_cam1>;
+ bus-type = <3>; /* CCP2 */
+ clock-lanes = <1>;
+ data-lanes = <0>;
+ lane-polarity = <0 0>;
+ clock-inv = <0>;
+ /* Select strobe = <1> for back camera, <0> for front camera */
+ strobe = <1>;
+ crc = <0>;
+ };
+ };
+ };
+};
+
&omap3_pmx_core {
pinctrl-names = "default";
@@ -328,6 +362,22 @@
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
>;
};
+
+ camera_pins: pinmux_camera {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */
+ >;
+ };
};
&i2c1 {
@@ -726,6 +776,40 @@
st,max-limit-y = <32>;
st,max-limit-z = <32>;
};
+
+ cam1: camera@3e {
+ compatible = "toshiba,et8ek8";
+ reg = <0x3e>;
+
+ vana-supply = <&vaux4>;
+
+ clocks = <&isp 0>;
+ clock-names = "extclk";
+ clock-frequency = <9600000>;
+
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+ port {
+ csi_cam1: endpoint {
+ bus-type = <3>; /* CCP2 */
+ strobe = <1>;
+ clock-inv = <0>;
+ crc = <1>;
+
+ remote-endpoint = <&csi_isp>;
+ };
+ };
+ };
+
+ /* D/A converter for auto-focus */
+ ad5820: dac@0c {
+ compatible = "adi,ad5820";
+ reg = <0x0c>;
+
+ VANA-supply = <&vaux4>;
+
+ #io-channel-cells = <0>;
+ };
};
&mmc1 {
@@ -733,6 +817,9 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
+ /* For debugging, it is often good idea to remove this GPIO.
+ It means you can remove back cover (to reboot by removing
+ battery) and still use the MMC card. */
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
@@ -741,7 +828,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vaux3>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
bus-width = <8>;
non-removable;
no-sdio;
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index cd220342a805..f25e158e7163 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -181,7 +181,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&w3cbw003c_npoweron>;
- vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
+ vqmmc-supply = <&w3cbw003c_wifi_nreset>;
bus-width = <4>;
cap-sdio-irq;
non-removable;
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 06ac0f80bcf0..9a601d15247b 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -223,7 +223,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 45e2ce0803de..96d0301a336a 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -174,7 +174,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a3ff4933dbc1..bdaf30c8c405 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -713,14 +713,12 @@
usbhsohci: ohci@48064400 {
compatible = "ti,ohci-omap3";
reg = <0x48064400 0x400>;
- interrupt-parent = <&intc>;
interrupts = <76>;
};
usbhsehci: ehci@48064800 {
compatible = "ti,ehci-omap";
reg = <0x48064800 0x400>;
- interrupt-parent = <&intc>;
interrupts = <77>;
};
};
@@ -831,7 +829,6 @@
reg-names = "tx",
"rx";
- interrupt-parent = <&intc>;
interrupts = <67>,
<68>;
};
@@ -844,7 +841,6 @@
reg-names = "tx",
"rx";
- interrupt-parent = <&intc>;
interrupts = <69>,
<70>;
};
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index abd6921143be..908951eb5943 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -33,7 +33,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
+ vqmmc-supply = <&vsim>;
/*
* S6-3 must be in ON position for 8 bit mode to function
* Else, use 4 bit mode
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 10ca1c174995..8b93d37310f2 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -129,6 +129,34 @@
output-high;
line-name = "touchscreen-reset";
};
+
+ pwm8: dmtimer-pwm-8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_direction_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer8>;
+ ti,clock-source = <0x01>;
+ };
+
+ pwm9: dmtimer-pwm-9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_enable_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x01>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <10000000>;
+ };
+
};
&dsi1 {
@@ -373,7 +401,7 @@
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
>;
@@ -488,6 +516,18 @@
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
+
+ vibrator_direction_pin: pinmux_vibrator_direction_pin {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
+ >;
+ };
+
+ vibrator_enable_pin: pinmux_vibrator_enable_pin {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
+ >;
+ };
};
&uart3 {
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 1b825128a7b9..a9a584b5b955 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -100,7 +100,7 @@
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index edbc4090297d..2b48e51c372a 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -267,7 +267,7 @@
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index b4d19a7ae393..3d3140fd9659 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,7 +10,7 @@
/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index d728ec963111..280d92d42bf1 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -290,7 +290,7 @@
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
index 74940b6d7719..676d8dd0624a 100644
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -122,7 +122,7 @@
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 4caadb253249..7824b2631cb6 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -290,7 +290,7 @@
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
>;
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 78397f66d0b2..552a5c4c5942 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -266,7 +266,7 @@
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */
+ OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */
OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index b9457dd21a69..e413b21ee331 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -20,27 +20,12 @@
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
compatible = "qcom,ipq4019";
- clocks {
- xo: xo {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
- };
-
soc {
-
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
- clock-frequency = <48000000>;
+ rng@22000 {
+ status = "ok";
};
- pinctrl@0x01000000 {
+ pinctrl@1000000 {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
@@ -108,5 +93,13 @@
watchdog@b017000 {
status = "ok";
};
+
+ wifi@a000000 {
+ status = "ok";
+ };
+
+ wifi@a800000 {
+ status = "ok";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 4b7d97275c62..10d112a4078e 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -96,6 +96,21 @@
clock-frequency = <32768>;
#clock-cells = <0>;
};
+
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <48000000>;
};
soc {
@@ -119,7 +134,15 @@
reg = <0x1800000 0x60000>;
};
- tlmm: pinctrl@0x01000000 {
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x22000 0x140>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ tlmm: pinctrl@1000000 {
compatible = "qcom,ipq4019-pinctrl";
reg = <0x01000000 0x300000>;
gpio-controller;
@@ -269,5 +292,89 @@
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};
+
+ wifi0: wifi@a000000 {
+ compatible = "qcom,ipq4019-wifi";
+ reg = <0xa000000 0x200000>;
+ resets = <&gcc WIFI0_CPU_INIT_RESET>,
+ <&gcc WIFI0_RADIO_SRIF_RESET>,
+ <&gcc WIFI0_RADIO_WARM_RESET>,
+ <&gcc WIFI0_RADIO_COLD_RESET>,
+ <&gcc WIFI0_CORE_WARM_RESET>,
+ <&gcc WIFI0_CORE_COLD_RESET>;
+ reset-names = "wifi_cpu_init", "wifi_radio_srif",
+ "wifi_radio_warm", "wifi_radio_cold",
+ "wifi_core_warm", "wifi_core_cold";
+ clocks = <&gcc GCC_WCSS2G_CLK>,
+ <&gcc GCC_WCSS2G_REF_CLK>,
+ <&gcc GCC_WCSS2G_RTC_CLK>;
+ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
+ "wifi_wcss_rtc";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 168 IRQ_TYPE_NONE>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7",
+ "msi8", "msi9", "msi10", "msi11",
+ "msi12", "msi13", "msi14", "msi15",
+ "legacy";
+ status = "disabled";
+ };
+
+ wifi1: wifi@a800000 {
+ compatible = "qcom,ipq4019-wifi";
+ reg = <0xa800000 0x200000>;
+ resets = <&gcc WIFI1_CPU_INIT_RESET>,
+ <&gcc WIFI1_RADIO_SRIF_RESET>,
+ <&gcc WIFI1_RADIO_WARM_RESET>,
+ <&gcc WIFI1_RADIO_COLD_RESET>,
+ <&gcc WIFI1_CORE_WARM_RESET>,
+ <&gcc WIFI1_CORE_COLD_RESET>;
+ reset-names = "wifi_cpu_init", "wifi_radio_srif",
+ "wifi_radio_warm", "wifi_radio_cold",
+ "wifi_core_warm", "wifi_core_cold";
+ clocks = <&gcc GCC_WCSS5G_CLK>,
+ <&gcc GCC_WCSS5G_REF_CLK>,
+ <&gcc GCC_WCSS5G_RTC_CLK>;
+ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
+ "wifi_wcss_rtc";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 169 IRQ_TYPE_NONE>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7",
+ "msi8", "msi9", "msi10", "msi11",
+ "msi12", "msi13", "msi14", "msi15",
+ "legacy";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index c5ee68a3f7f5..a39207625354 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -779,7 +779,7 @@
};
replicator@fc31c000 {
- compatible = "qcom,coresight-replicator1x", "arm,primecell";
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0xfc31c000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 52a7b586bac7..cd4d5ff7749e 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -11,6 +11,8 @@
/dts-v1/;
#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
/ {
model = "Genmai";
@@ -34,6 +36,54 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ leds {
+ status = "okay";
+ compatible = "gpio-leds";
+
+ led1 {
+ gpios = <&port4 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ gpios = <&port4 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+
+ scif2_pins: serial2 {
+ /* P3_0 as TxD2; P3_2 as RxD2 */
+ pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+ };
+
+ i2c2_pins: i2c2 {
+ /* RIIC2: P1_4 as SCL, P1_5 as SDA */
+ pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+ };
+
+ ether_pins: ether {
+ /* Ethernet on Ports 1,2,3,5 */
+ pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL */
+ <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */
+ <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+ <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+ <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */
+ <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */
+ <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
+ <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER */
+ <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN */
+ <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS */
+ <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0 */
+ <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1 */
+ <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2 */
+ <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3 */
+ <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0 */
+ <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1 */
+ <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
+ <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+ };
};
&extal_clk {
@@ -52,12 +102,28 @@
status = "okay";
};
+&ether {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ether_pins>;
+
+ status = "okay";
+
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&i2c2 {
status = "okay";
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
eeprom@50 {
- compatible = "renesas,24c128";
+ compatible = "renesas,24c128", "atmel,24c128";
reg = <0x50>;
pagesize = <64>;
};
@@ -68,6 +134,9 @@
};
&scif2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&scif2_pins>;
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 72df20a04320..5dcaaf131d27 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -10,6 +10,8 @@
/dts-v1/;
#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
/ {
model = "RSKRZA1";
@@ -33,6 +35,15 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ leds {
+ status = "okay";
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&port7 1 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&extal_clk {
@@ -47,11 +58,57 @@
clock-frequency = <32768>;
};
+&pinctrl {
+
+ /* Serial Console */
+ scif2_pins: serial2 {
+ pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */
+ <RZA1_PINMUX(3, 2, 4)>; /* RxD2 */
+ };
+
+ /* Ethernet */
+ ether_pins: ether {
+ /* Ethernet on Ports 1,2,3,5 */
+ pinmux = <RZA1_PINMUX(1, 14, 4)>, /* ET_COL */
+ <RZA1_PINMUX(5, 9, 2)>, /* ET_MDC */
+ <RZA1_PINMUX(3, 3, 2)>, /* ET_MDIO */
+ <RZA1_PINMUX(3, 4, 2)>, /* ET_RXCLK */
+ <RZA1_PINMUX(3, 5, 2)>, /* ET_RXER */
+ <RZA1_PINMUX(3, 6, 2)>, /* ET_RXDV */
+ <RZA1_PINMUX(2, 0, 2)>, /* ET_TXCLK */
+ <RZA1_PINMUX(2, 1, 2)>, /* ET_TXER */
+ <RZA1_PINMUX(2, 2, 2)>, /* ET_TXEN */
+ <RZA1_PINMUX(2, 3, 2)>, /* ET_CRS */
+ <RZA1_PINMUX(2, 4, 2)>, /* ET_TXD0 */
+ <RZA1_PINMUX(2, 5, 2)>, /* ET_TXD1 */
+ <RZA1_PINMUX(2, 6, 2)>, /* ET_TXD2 */
+ <RZA1_PINMUX(2, 7, 2)>, /* ET_TXD3 */
+ <RZA1_PINMUX(2, 8, 2)>, /* ET_RXD0 */
+ <RZA1_PINMUX(2, 9, 2)>, /* ET_RXD1 */
+ <RZA1_PINMUX(2, 10, 2)>, /* ET_RXD2 */
+ <RZA1_PINMUX(2, 11, 2)>; /* ET_RXD3 */
+ };
+
+ /* SDHI ch1 on CN1 */
+ sdhi1_pins: sdhi1 {
+ pinmux = <RZA1_PINMUX(3, 8, 7)>, /* SD_CD_1 */
+ <RZA1_PINMUX(3, 9, 7)>, /* SD_WP_1 */
+ <RZA1_PINMUX(3, 10, 7)>, /* SD_D1_1 */
+ <RZA1_PINMUX(3, 11, 7)>, /* SD_D0_1 */
+ <RZA1_PINMUX(3, 12, 7)>, /* SD_CLK_1 */
+ <RZA1_PINMUX(3, 13, 7)>, /* SD_CMD_1 */
+ <RZA1_PINMUX(3, 14, 7)>, /* SD_D3_1 */
+ <RZA1_PINMUX(3, 15, 7)>; /* SD_D2_1 */
+ };
+};
+
&mtu2 {
status = "okay";
};
&ether {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ether_pins>;
status = "okay";
renesas,no-ether-link;
phy-handle = <&phy0>;
@@ -61,6 +118,8 @@
};
&sdhi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi1_pins>;
bus-width = <4>;
status = "okay";
};
@@ -78,5 +137,7 @@
};
&scif2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&scif2_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 5cf53e9943af..4ed12a4d9d51 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -207,6 +207,84 @@
};
};
+ pinctrl: pin-controller@fcfe3000 {
+ compatible = "renesas,r7s72100-ports";
+
+ reg = <0xfcfe3000 0x4230>;
+
+ port0: gpio-0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 6>;
+ };
+
+ port1: gpio-1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ port2: gpio-2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ port3: gpio-3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ port4: gpio-4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ port5: gpio-5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 80 11>;
+ };
+
+ port6: gpio-6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ port7: gpio-7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ port8: gpio-8 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ port9: gpio-9 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 144 8>;
+ };
+
+ port10: gpio-10 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 160 16>;
+ };
+
+ port11: gpio-11 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 176 16>;
+ };
+ };
+
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
index 9b54783cc2a5..081af0192851 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -17,9 +17,40 @@
aliases {
serial0 = &scif0;
+ ethernet0 = &avb;
+ };
+};
+
+&pfc {
+ scif0_pins: scif0 {
+ groups = "scif0_data_d";
+ function = "scif0";
+ };
+
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii";
+ function = "avb";
};
};
&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy3>;
+ phy-mode = "gmii";
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ micrel,led-mode = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index 001ca9144f4b..ff7993818637 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -22,8 +22,34 @@
device_type = "memory";
reg = <2 0x00000000 0 0x20000000>;
};
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&extal_clk {
clock-frequency = <20000000>;
};
+
+&pfc {
+ mmcif0_pins: mmc {
+ groups = "mmc_data8_b", "mmc_ctrl";
+ function = "mmc";
+ };
+};
+
+&mmcif0 {
+ pinctrl-0 = <&mmcif0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&reg_3p3v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index 3a22538208f2..3d918d106593 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for the SK-RZG1M board
*
- * Copyright (C) 2016 Cogent Embedded, Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -39,11 +39,34 @@
clock-frequency = <20000000>;
};
+&pfc {
+ scif0_pins: scif0 {
+ groups = "scif0_data_d";
+ function = "scif0";
+ };
+
+ ether_pins: ether {
+ groups = "eth_link", "eth_mdio", "eth_rmii";
+ function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ groups = "intc_irq0";
+ function = "intc";
+ };
+};
+
&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
&ether {
+ pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy1>;
renesas,ether-link-active-low;
status = "okay";
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 0ddac81742e4..14222c72f0e0 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Source for the r8a7743 SoC
*
- * Copyright (C) 2016 Cogent Embedded Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -18,9 +18,19 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -28,8 +38,26 @@
reg = <0>;
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ clock-frequency = <1500000000>;
+ power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
+ next-level-cache = <&L2_CA15>;
};
L2_CA15: cache-controller-0 {
@@ -48,6 +76,12 @@
#size-cells = <2>;
ranges;
+ apmu@e6152000 {
+ compatible = "renesas,r8a7743-apmu", "renesas,apmu";
+ reg = <0 0xe6152000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -65,6 +99,126 @@
resets = <&cpg 408>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7743",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 904>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 904>;
+ };
+
irqc: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7743", "renesas,irqc";
#interrupt-cells = <2>;
@@ -123,6 +277,11 @@
#power-domain-cells = <1>;
};
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a7743";
+ reg = <0 0xe6060000 0 0x250>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
@@ -189,6 +348,94 @@
dma-channels = <15>;
};
+ /* The memory map in the User's Manual maps the cores to bus
+ * numbers
+ */
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7743",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7743",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7743",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7743",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7743",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7743",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 925>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7743",
"renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -468,6 +715,29 @@
status = "disabled";
};
+ icram2: sram@e6300000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe6300000 0 0x40000>;
+ };
+
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x10>;
+ };
+ };
+
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7743";
reg = <0 0xee700000 0 0x400>;
@@ -480,6 +750,35 @@
#size-cells = <0>;
status = "disabled";
};
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7743",
+ "renesas,etheravb-rcar-gen2";
+ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7743",
+ "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 315>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
+ reg-io-width = <4>;
+ max-frequency = <97500000>;
+ status = "disabled";
+ };
};
/* External root clock */
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
index 97840b340197..b4d679b04ad6 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for the SK-RZG1E board
*
- * Copyright (C) 2016 Cogent Embedded, Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -34,11 +34,34 @@
clock-frequency = <20000000>;
};
+&pfc {
+ scif2_pins: scif2 {
+ groups = "scif2_data";
+ function = "scif2";
+ };
+
+ ether_pins: ether {
+ groups = "eth_link", "eth_mdio", "eth_rmii";
+ function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ groups = "intc_irq8";
+ function = "intc";
+ };
+};
+
&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
&ether {
+ pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy1>;
renesas,ether-link-active-low;
status = "okay";
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 2feb0084bb3b..aff90dfb8b32 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Source for the r8a7745 SoC
*
- * Copyright (C) 2016 Cogent Embedded Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -123,6 +123,11 @@
#power-domain-cells = <1>;
};
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a7745";
+ reg = <0 0xe6060000 0 0x11c>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7745",
"renesas,rcar-dmac";
@@ -468,6 +473,29 @@
status = "disabled";
};
+ icram2: sram@e6300000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe6300000 0 0x40000>;
+ };
+
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x10>;
+ };
+ };
+
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7745";
reg = <0 0xee700000 0 0x400>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 2805a8608d4b..16358bf8d1db 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -830,6 +830,24 @@
status = "disabled";
};
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x10>;
+ };
+ };
+
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7790";
reg = <0 0xee700000 0 0x400>;
@@ -855,7 +873,7 @@
};
sata0: sata@ee300000 {
- compatible = "renesas,sata-r8a7790";
+ compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
@@ -864,7 +882,7 @@
};
sata1: sata@ee500000 {
- compatible = "renesas,sata-r8a7790";
+ compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata";
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
@@ -909,7 +927,7 @@
};
vin0: video@e6ef0000 {
- compatible = "renesas,vin-r8a7790";
+ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
@@ -918,7 +936,7 @@
};
vin1: video@e6ef1000 {
- compatible = "renesas,vin-r8a7790";
+ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
@@ -927,7 +945,7 @@
};
vin2: video@e6ef2000 {
- compatible = "renesas,vin-r8a7790";
+ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
@@ -936,7 +954,7 @@
};
vin3: video@e6ef3000 {
- compatible = "renesas,vin-r8a7790";
+ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 001e6116c47c..0ce0b278e1cb 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -642,11 +642,19 @@
};
};
+ cec_clock: cec-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
hdmi@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
@@ -702,7 +710,7 @@
};
eeprom@50 {
- compatible = "renesas,24c02";
+ compatible = "renesas,24c02", "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index bd93f699ad84..f1d1a9772153 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -890,6 +890,24 @@
status = "disabled";
};
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x10>;
+ };
+ };
+
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7791";
reg = <0 0xee700000 0 0x400>;
@@ -915,7 +933,7 @@
};
sata0: sata@ee300000 {
- compatible = "renesas,sata-r8a7791";
+ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
@@ -924,7 +942,7 @@
};
sata1: sata@ee500000 {
- compatible = "renesas,sata-r8a7791";
+ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee500000 0 0x2000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
@@ -969,7 +987,7 @@
};
vin0: video@e6ef0000 {
- compatible = "renesas,vin-r8a7791";
+ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
@@ -978,7 +996,7 @@
};
vin1: video@e6ef1000 {
- compatible = "renesas,vin-r8a7791";
+ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
@@ -987,7 +1005,7 @@
};
vin2: video@e6ef2000 {
- compatible = "renesas,vin-r8a7791";
+ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 0efecb232ee5..2623f39bed2b 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -465,6 +465,24 @@
status = "disabled";
};
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x10>;
+ };
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7792";
reg = <0 0xee100000 0 0x328>;
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 13b980f27bbc..497716b6fbe2 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -848,6 +848,24 @@
status = "disabled";
};
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x10>;
+ };
+ };
+
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7793";
reg = <0 0xee700000 0 0x400>;
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 7d9a81d970d8..26535414203a 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -588,6 +588,24 @@
status = "disabled";
};
+ icram0: sram@e63a0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63a0000 0 0x12000>;
+ };
+
+ icram1: sram@e63c0000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe63c0000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63c0000 0x1000>;
+
+ smp-sram@0 {
+ compatible = "renesas,smp-sram";
+ reg = <0 0x10>;
+ };
+ };
+
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7794";
reg = <0 0xee700000 0 0x400>;
@@ -783,7 +801,7 @@
};
vin0: video@e6ef0000 {
- compatible = "renesas,vin-r8a7794";
+ compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
@@ -792,7 +810,7 @@
};
vin1: video@e6ef1000 {
- compatible = "renesas,vin-r8a7794";
+ compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin";
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 5726135b7f8a..fdb1570bc7d3 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -357,7 +357,6 @@
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
sd-uhs-sdr12;
@@ -372,7 +371,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index ec91325d3b6e..4916c65e0ace 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -287,7 +287,6 @@
fifo-depth = <0x100>;
mmc-ddr-1_8v;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
resets = <&cru SRST_EMMC>;
@@ -599,7 +598,7 @@
rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
};
- sdmmc_cd: sdmcc-cd {
+ sdmmc_cd: sdmmc-cd {
rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index e1f5198723b2..ef1eabf2512c 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -190,7 +190,6 @@
#include "tps65910.dtsi"
&mmc0 { /* sdmmc */
- num-slots = <1>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
@@ -202,7 +201,6 @@
};
&mmc1 { /* wifi */
- num-slots = <1>;
status = "okay";
non-removable;
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index 7ca1cf5241e0..13e285c53def 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -132,7 +132,6 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- num-slots = <1>;
vmmc-supply = <&vcc_sd>;
status = "okay";
};
@@ -141,7 +140,6 @@
bus-width = <4>;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
pinctrl-names = "default";
vmmc-supply = <&vcc_wifi>;
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 8907deaab18e..400cbf9609e3 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -185,7 +185,6 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
vmmc-supply = <&vcc_emmc>;
@@ -336,7 +335,6 @@
&mmc0 {
bus-width = <4>;
disable-wp;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd>;
@@ -349,7 +347,6 @@
bus-width = <4>;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
vmmc-supply = <&vccio_wl>;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index 5b2a0b6885cd..8ba9e06062f3 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -89,7 +89,6 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
status = "okay";
@@ -256,7 +255,6 @@
};
&mmc0 {
- num-slots = <1>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index ca0a1c4bc15c..53d6fc2fdbce 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -296,7 +296,6 @@
};
&mmc0 {
- num-slots = <1>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 1b55192b7d04..73e384585755 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -40,7 +40,8 @@
/dts-v1/;
-#include "rk322x.dtsi"
+#include <dt-bindings/input/input.h>
+#include "rk3229.dtsi"
/ {
model = "Rockchip RK3229 Evaluation board";
@@ -51,6 +52,15 @@
reg = <0x60000000 0x40000000>;
};
+ dc_12v: dc-12v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
ext_gmac: ext_gmac {
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -67,6 +77,7 @@
regulator-name = "vcc_host";
regulator-always-on;
regulator-boot-on;
+ vin-supply = <&vcc_sys>;
};
vcc_phy: vcc-phy-regulator {
@@ -77,9 +88,98 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ vin-supply = <&vccio_1v8>;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vccio_1v8: vccio-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vccio_3v3: vccio-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_arm: vdd-arm-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 25000 1>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_log: vdd-log-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ power_key: power-key {
+ label = "GPIO Key Power";
+ gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <100>;
+ wakeup-source;
+ };
};
};
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ status = "okay";
+};
+
&gmac {
assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
@@ -96,7 +196,21 @@
status = "okay";
};
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vccio_3v3>;
+ vccio2-supply = <&vccio_1v8>;
+ vccio4-supply = <&vccio_3v3>;
+};
+
&pinctrl {
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -104,6 +218,19 @@
};
};
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ status = "okay";
+};
+
&uart2 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/rk3229.dtsi
index 142e60cab65f..6fe6c15fc13a 100644
--- a/arch/arm/boot/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/boot/dts/rk3229.dtsi
@@ -1,22 +1,22 @@
/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful,
+ * This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively,
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
@@ -40,62 +40,50 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6ul-geam.dtsi"
+#include "rk322x.dtsi"
/ {
- model = "Engicam GEAM6UL";
- compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
-};
+ compatible = "rockchip,rk3229";
-&can1 {
- status = "okay";
-};
-
-&can2 {
- status = "okay";
-};
+ /delete-node/ opp-table0;
-&lcdif {
- display = <&display0>;
- status = "okay";
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
- display0: display {
- bits-per-pixel = <16>;
- bus-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <28000000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <30>;
- hback-porch = <30>;
- hsync-len = <64>;
- vback-porch = <5>;
- vfront-porch = <5>;
- vsync-len = <20>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <975000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1175000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1275000>;
+ };
+ opp-1296000000 {
+ opp-hz = /bits/ 64 <1296000000>;
+ opp-microvolt = <1325000>;
+ };
+ opp-1392000000 {
+ opp-hz = /bits/ 64 <1392000000>;
+ opp-microvolt = <1375000>;
+ };
+ opp-1464000000 {
+ opp-hz = /bits/ 64 <1464000000>;
+ opp-microvolt = <1400000>;
};
};
};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- status = "okay";
-};
-
-&tsc {
- measure-delay-time = <0x1ffff>;
- pre-charge-time = <0x1fff>;
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index f3e4ffd9f818..06814421eed2 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -55,6 +55,7 @@
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
+ spi0 = &spi0;
};
cpus {
@@ -70,6 +71,7 @@
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
+ enable-method = "psci";
};
cpu1: cpu@f01 {
@@ -78,6 +80,7 @@
reg = <0xf01>;
resets = <&cru SRST_CORE1>;
operating-points-v2 = <&cpu0_opp_table>;
+ enable-method = "psci";
};
cpu2: cpu@f02 {
@@ -86,6 +89,7 @@
reg = <0xf02>;
resets = <&cru SRST_CORE2>;
operating-points-v2 = <&cpu0_opp_table>;
+ enable-method = "psci";
};
cpu3: cpu@f03 {
@@ -94,6 +98,7 @@
reg = <0xf03>;
resets = <&cru SRST_CORE3>;
operating-points-v2 = <&cpu0_opp_table>;
+ enable-method = "psci";
};
};
@@ -151,6 +156,11 @@
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
timer {
compatible = "arm,armv7-timer";
arm,cpu-registers-not-fw-configured;
@@ -196,6 +206,19 @@
status = "disabled";
};
+ spdif: spdif@100d0000 {
+ compatible = "rockchip,rk3228-spdif";
+ reg = <0x100d0000 0x1000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+ clock-names = "mclk", "hclk";
+ dmas = <&pdma 10>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx>;
+ status = "disabled";
+ };
+
i2s2: i2s2@100e0000 {
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100e0000 0x4000>;
@@ -215,6 +238,11 @@
#address-cells = <1>;
#size-cells = <1>;
+ io_domains: io-domains {
+ compatible = "rockchip,rk3228-io-voltage-domain";
+ status = "disabled";
+ };
+
u2phy0: usb2-phy@760 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0760 0x0c>;
@@ -309,6 +337,23 @@
status = "disabled";
};
+ efuse: efuse@11040000 {
+ compatible = "rockchip,rk3228-efuse";
+ reg = <0x11040000 0x20>;
+ clocks = <&cru PCLK_EFUSE_256>;
+ clock-names = "pclk_efuse";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells */
+ efuse_id: id@7 {
+ reg = <0x7 0x10>;
+ };
+ cpu_leakage: cpu_leakage@17 {
+ reg = <0x17 0x1>;
+ };
+ };
+
i2c0: i2c@11050000 {
compatible = "rockchip,rk3228-i2c";
reg = <0x11050000 0x1000>;
@@ -361,6 +406,19 @@
status = "disabled";
};
+ spi0: spi@11090000 {
+ compatible = "rockchip,rk3228-spi";
+ reg = <0x11090000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0 &spi0_cs1>;
+ status = "disabled";
+ };
+
wdt: watchdog@110a0000 {
compatible = "snps,dw-wdt";
reg = <0x110a0000 0x100>;
@@ -500,8 +558,70 @@
status = "disabled";
};
+ vpu_mmu: iommu@20020800 {
+ compatible = "rockchip,iommu";
+ reg = <0x20020800 0x100>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vpu_mmu";
+ iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vdec_mmu: iommu@20030480 {
+ compatible = "rockchip,iommu";
+ reg = <0x20030480 0x40>, <0x200304c0 0x40>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vdec_mmu";
+ iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vop_mmu: iommu@20053f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x20053f00 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vop_mmu";
+ iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ iep_mmu: iommu@20070800 {
+ compatible = "rockchip,iommu";
+ reg = <0x20070800 0x100>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "iep_mmu";
+ iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@30000000 {
+ compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x30000000 0x4000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@30010000 {
+ compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x30010000 0x4000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+ status = "disabled";
+ };
+
emmc: dwmmc@30020000 {
- compatible = "rockchip,rk3288-dw-mshc";
+ compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30020000 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <37500000>;
@@ -511,7 +631,6 @@
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
bus-width = <8>;
default-sample-phase = <158>;
- num-slots = <1>;
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
@@ -710,6 +829,40 @@
drive-strength = <12>;
};
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <1 RK_PB7 1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <1 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PC4 1 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PC5 1 &pcfg_pull_none_drv_12ma>;
+ };
+ };
+
+ sdio {
+ sdio_clk: sdio-clk {
+ rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none_drv_12ma>,
+ <3 RK_PA3 1 &pcfg_pull_none_drv_12ma>,
+ <3 RK_PA4 1 &pcfg_pull_none_drv_12ma>,
+ <3 RK_PA5 1 &pcfg_pull_none_drv_12ma>;
+ };
+ };
+
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
@@ -797,6 +950,42 @@
};
};
+ spi-0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins = <0 14 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins = <1 12 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ spi-1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins = <2 2 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs1: spi1-cs1 {
+ rockchip,pins = <2 3 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
i2s1 {
i2s1_bus: i2s1-bus {
rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>,
@@ -835,6 +1024,12 @@
};
};
+ spdif {
+ spdif_tx: spdif-tx {
+ rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
tsadc {
otp_gpio: otp-gpio {
rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 0dec94c3583b..39b61dce97ad 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -45,7 +45,44 @@
/ {
memory@0 {
device_type = "memory";
- reg = <0x0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <100000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <640000>;
+ };
+
+ esc {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1000000>;
+ };
+
+ home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ press-threshold-microvolt = <1300000>;
+ };
};
backlight: backlight {
@@ -212,19 +249,22 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
status = "okay";
};
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp; /* wp not hooked up */
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
status = "okay";
@@ -248,6 +288,11 @@
status = "ok";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
index 61d1c1028317..41405974253a 100644
--- a/arch/arm/boot/dts/rk3288-fennec.dts
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -47,7 +47,7 @@
compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
memory@0 {
- reg = <0x0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
};
@@ -77,7 +77,6 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
status = "okay";
@@ -99,6 +98,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index 813496618d08..5f05815f47e0 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -47,7 +47,7 @@
/ {
memory@0 {
device_type = "memory";
- reg = <0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
};
ext_gmac: external-gmac-clock {
@@ -78,7 +78,6 @@
mmc-ddr-1_8v;
mmc-hs200-1_8v;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index b11a282c334c..7da0947ababb 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -269,7 +269,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
@@ -284,7 +283,6 @@
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
sd-uhs-sdr12;
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 32dabae12e67..b9e6f3a97240 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -46,7 +46,7 @@
/ {
memory@0 {
device_type = "memory";
- reg = <0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
};
adc-keys {
@@ -208,7 +208,6 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
@@ -527,7 +526,6 @@
bus-width = <4>;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
vmmc-supply = <&vbat_wl>;
@@ -541,7 +539,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 30e93f694ae8..4d923aa6ed11 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -54,7 +54,7 @@
memory@0 {
device_type = "memory";
- reg = <0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
};
ext_gmac: external-gmac-clock {
@@ -126,7 +126,6 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
@@ -404,7 +403,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 3dda79579b51..1241cbcfc16f 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -263,7 +263,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vdd_io_sd>;
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index 26cd3ad45160..99cfae875e12 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -55,7 +55,7 @@
*/
memory {
device_type = "memory";
- reg = <0 0x8000000>;
+ reg = <0x0 0x0 0x0 0x8000000>;
};
aliases {
@@ -136,7 +136,6 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
vmmc-supply = <&vdd_3v3_io>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index aa1f9ecff231..f084e0c8dcb3 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -50,7 +50,7 @@
memory@0 {
device_type = "memory";
- reg = <0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
};
ext_gmac: external-gmac-clock {
@@ -150,7 +150,6 @@
mmc-ddr-1_8v;
mmc-hs200-1_8v;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
vmmc-supply = <&vcc_io>;
@@ -164,7 +163,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp; /* wp not hooked up */
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
sd-uhs-sdr12;
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 1145b62edde7..e95215c9788b 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -50,7 +50,7 @@
memory@0 {
device_type = "memory";
- reg = <0x0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
};
ext_gmac: external-gmac-clock {
@@ -354,7 +354,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vcc_sdmmc>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 749a9b86e6e2..b9c471fcbd42 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -43,7 +43,7 @@
/ {
memory@0 {
- reg = <0x0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
};
@@ -89,7 +89,6 @@
cap-mmc-highspeed;
disable-wp;
non-removable;
- num-slots = <1>;
mmc-pwrseq = <&emmc_pwrseq>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 8ed25e9f60bc..0e084b8a86ac 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -147,7 +147,6 @@
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>;
vmmc-supply = <&vcc_io>;
@@ -161,7 +160,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp; /* wp not hooked up */
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index f601c78386a9..346b0d8b474d 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -50,7 +50,7 @@
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
memory {
- reg = <0x0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
};
@@ -156,6 +156,11 @@
status = "ok";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";
@@ -465,7 +470,6 @@
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp; /* wp not hooked up */
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
status = "okay";
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index aef07101e9ab..95e9bee8bca2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -117,7 +117,6 @@
card-detect-delay = <200>;
cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
rockchip,default-sample-phase = <90>;
- num-slots = <1>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index d709fa1847f9..6e5bd8974f22 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -49,7 +49,7 @@
/ {
memory@0 {
device_type = "memory";
- reg = <0x0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x80000000>;
};
gpio_keys: gpio-keys {
@@ -156,7 +156,6 @@
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
};
@@ -372,7 +371,6 @@
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
sd-uhs-sdr12;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 858e1fed762a..356ed1e62452 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -49,8 +49,8 @@
#include <dt-bindings/soc/rockchip,boot-mode.h>
/ {
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
compatible = "rockchip,rk3288";
@@ -139,13 +139,13 @@
amba {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
dmac_peri: dma-controller@ff250000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0xff250000 0x4000>;
+ reg = <0x0 0xff250000 0x0 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
@@ -156,7 +156,7 @@
dmac_bus_ns: dma-controller@ff600000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0xff600000 0x4000>;
+ reg = <0x0 0xff600000 0x0 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
@@ -168,7 +168,7 @@
dmac_bus_s: dma-controller@ffb20000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0xffb20000 0x4000>;
+ reg = <0x0 0xffb20000 0x0 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
@@ -179,8 +179,8 @@
};
reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
/*
@@ -194,7 +194,7 @@
* is found.
*/
dma-unusable@fe000000 {
- reg = <0xfe000000 0x1000000>;
+ reg = <0x0 0xfe000000 0x0 0x1000000>;
};
};
@@ -217,7 +217,7 @@
timer: timer@ff810000 {
compatible = "rockchip,rk3288-timer";
- reg = <0xff810000 0x20>;
+ reg = <0x0 0xff810000 0x0 0x20>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>, <&cru PCLK_TIMER>;
clock-names = "timer", "pclk";
@@ -236,7 +236,7 @@
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xff0c0000 0x4000>;
+ reg = <0x0 0xff0c0000 0x0 0x4000>;
resets = <&cru SRST_MMC0>;
reset-names = "reset";
status = "disabled";
@@ -250,7 +250,7 @@
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xff0d0000 0x4000>;
+ reg = <0x0 0xff0d0000 0x0 0x4000>;
resets = <&cru SRST_SDIO0>;
reset-names = "reset";
status = "disabled";
@@ -264,7 +264,7 @@
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xff0e0000 0x4000>;
+ reg = <0x0 0xff0e0000 0x0 0x4000>;
resets = <&cru SRST_SDIO1>;
reset-names = "reset";
status = "disabled";
@@ -278,7 +278,7 @@
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xff0f0000 0x4000>;
+ reg = <0x0 0xff0f0000 0x0 0x4000>;
resets = <&cru SRST_EMMC>;
reset-names = "reset";
status = "disabled";
@@ -286,7 +286,7 @@
saradc: saradc@ff100000 {
compatible = "rockchip,saradc";
- reg = <0xff100000 0x100>;
+ reg = <0x0 0xff100000 0x0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
@@ -305,7 +305,7 @@
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
- reg = <0xff110000 0x1000>;
+ reg = <0x0 0xff110000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -320,7 +320,7 @@
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
- reg = <0xff120000 0x1000>;
+ reg = <0x0 0xff120000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -335,7 +335,7 @@
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
- reg = <0xff130000 0x1000>;
+ reg = <0x0 0xff130000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -343,7 +343,7 @@
i2c1: i2c@ff140000 {
compatible = "rockchip,rk3288-i2c";
- reg = <0xff140000 0x1000>;
+ reg = <0x0 0xff140000 0x0 0x1000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -356,7 +356,7 @@
i2c3: i2c@ff150000 {
compatible = "rockchip,rk3288-i2c";
- reg = <0xff150000 0x1000>;
+ reg = <0x0 0xff150000 0x0 0x1000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -369,7 +369,7 @@
i2c4: i2c@ff160000 {
compatible = "rockchip,rk3288-i2c";
- reg = <0xff160000 0x1000>;
+ reg = <0x0 0xff160000 0x0 0x1000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -382,7 +382,7 @@
i2c5: i2c@ff170000 {
compatible = "rockchip,rk3288-i2c";
- reg = <0xff170000 0x1000>;
+ reg = <0x0 0xff170000 0x0 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -395,7 +395,7 @@
uart0: serial@ff180000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
- reg = <0xff180000 0x100>;
+ reg = <0x0 0xff180000 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -408,7 +408,7 @@
uart1: serial@ff190000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
- reg = <0xff190000 0x100>;
+ reg = <0x0 0xff190000 0x0 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -421,7 +421,7 @@
uart2: serial@ff690000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
- reg = <0xff690000 0x100>;
+ reg = <0x0 0xff690000 0x0 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -434,7 +434,7 @@
uart3: serial@ff1b0000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
- reg = <0xff1b0000 0x100>;
+ reg = <0x0 0xff1b0000 0x0 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -447,7 +447,7 @@
uart4: serial@ff1c0000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
- reg = <0xff1c0000 0x100>;
+ reg = <0x0 0xff1c0000 0x0 0x100>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -535,7 +535,7 @@
tsadc: tsadc@ff280000 {
compatible = "rockchip,rk3288-tsadc";
- reg = <0xff280000 0x100>;
+ reg = <0x0 0xff280000 0x0 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
@@ -552,7 +552,7 @@
gmac: ethernet@ff290000 {
compatible = "rockchip,rk3288-gmac";
- reg = <0xff290000 0x10000>;
+ reg = <0x0 0xff290000 0x0 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
@@ -572,7 +572,7 @@
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
- reg = <0xff500000 0x100>;
+ reg = <0x0 0xff500000 0x0 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST0>;
clock-names = "usbhost";
@@ -586,7 +586,7 @@
usb_host1: usb@ff540000 {
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
"snps,dwc2";
- reg = <0xff540000 0x40000>;
+ reg = <0x0 0xff540000 0x0 0x40000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
@@ -599,7 +599,7 @@
usb_otg: usb@ff580000 {
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
"snps,dwc2";
- reg = <0xff580000 0x40000>;
+ reg = <0x0 0xff580000 0x0 0x40000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
@@ -614,7 +614,7 @@
usb_hsic: usb@ff5c0000 {
compatible = "generic-ehci";
- reg = <0xff5c0000 0x100>;
+ reg = <0x0 0xff5c0000 0x0 0x100>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HSIC>;
clock-names = "usbhost";
@@ -623,7 +623,7 @@
i2c0: i2c@ff650000 {
compatible = "rockchip,rk3288-i2c";
- reg = <0xff650000 0x1000>;
+ reg = <0x0 0xff650000 0x0 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -636,7 +636,7 @@
i2c2: i2c@ff660000 {
compatible = "rockchip,rk3288-i2c";
- reg = <0xff660000 0x1000>;
+ reg = <0x0 0xff660000 0x0 0x1000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -649,7 +649,7 @@
pwm0: pwm@ff680000 {
compatible = "rockchip,rk3288-pwm";
- reg = <0xff680000 0x10>;
+ reg = <0x0 0xff680000 0x0 0x10>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -660,7 +660,7 @@
pwm1: pwm@ff680010 {
compatible = "rockchip,rk3288-pwm";
- reg = <0xff680010 0x10>;
+ reg = <0x0 0xff680010 0x0 0x10>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
@@ -671,7 +671,7 @@
pwm2: pwm@ff680020 {
compatible = "rockchip,rk3288-pwm";
- reg = <0xff680020 0x10>;
+ reg = <0x0 0xff680020 0x0 0x10>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
@@ -682,7 +682,7 @@
pwm3: pwm@ff680030 {
compatible = "rockchip,rk3288-pwm";
- reg = <0xff680030 0x10>;
+ reg = <0x0 0xff680030 0x0 0x10>;
#pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
@@ -693,10 +693,10 @@
bus_intmem@ff700000 {
compatible = "mmio-sram";
- reg = <0xff700000 0x18000>;
+ reg = <0x0 0xff700000 0x0 0x18000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0xff700000 0x18000>;
+ ranges = <0 0x0 0xff700000 0x18000>;
smp-sram@0 {
compatible = "rockchip,rk3066-smp-sram";
reg = <0x00 0x10>;
@@ -705,12 +705,12 @@
sram@ff720000 {
compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
- reg = <0xff720000 0x1000>;
+ reg = <0x0 0xff720000 0x0 0x1000>;
};
pmu: power-management@ff730000 {
compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
- reg = <0xff730000 0x100>;
+ reg = <0x0 0xff730000 0x0 0x100>;
power: power-controller {
compatible = "rockchip,rk3288-power-controller";
@@ -831,12 +831,12 @@
sgrf: syscon@ff740000 {
compatible = "rockchip,rk3288-sgrf", "syscon";
- reg = <0xff740000 0x1000>;
+ reg = <0x0 0xff740000 0x0 0x1000>;
};
cru: clock-controller@ff760000 {
compatible = "rockchip,rk3288-cru";
- reg = <0xff760000 0x1000>;
+ reg = <0x0 0xff760000 0x0 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -854,7 +854,7 @@
grf: syscon@ff770000 {
compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
- reg = <0xff770000 0x1000>;
+ reg = <0x0 0xff770000 0x0 0x1000>;
edp_phy: edp-phy {
compatible = "rockchip,rk3288-dp-phy";
@@ -903,7 +903,7 @@
wdt: watchdog@ff800000 {
compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
- reg = <0xff800000 0x100>;
+ reg = <0x0 0xff800000 0x0 0x100>;
clocks = <&cru PCLK_WDT>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -911,7 +911,7 @@
spdif: sound@ff88b0000 {
compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
- reg = <0xff8b0000 0x10000>;
+ reg = <0x0 0xff8b0000 0x0 0x10000>;
#sound-dai-cells = <0>;
clock-names = "hclk", "mclk";
clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
@@ -926,7 +926,7 @@
i2s: i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
- reg = <0xff890000 0x10000>;
+ reg = <0x0 0xff890000 0x0 0x10000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -943,7 +943,7 @@
crypto: cypto-controller@ff8a0000 {
compatible = "rockchip,rk3288-crypto";
- reg = <0xff8a0000 0x4000>;
+ reg = <0x0 0xff8a0000 0x0 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
<&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
@@ -953,9 +953,28 @@
status = "okay";
};
+ iep_mmu: iommu@ff900800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff900800 0x0 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "iep_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ isp_mmu: iommu@ff914000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "isp_mmu";
+ #iommu-cells = <0>;
+ rockchip,disable-mmu-reset;
+ status = "disabled";
+ };
+
vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
- reg = <0xff930000 0x19c>;
+ reg = <0x0 0xff930000 0x0 0x19c>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
@@ -988,7 +1007,7 @@
vopb_mmu: iommu@ff930300 {
compatible = "rockchip,iommu";
- reg = <0xff930300 0x100>;
+ reg = <0x0 0xff930300 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
power-domains = <&power RK3288_PD_VIO>;
@@ -998,7 +1017,7 @@
vopl: vop@ff940000 {
compatible = "rockchip,rk3288-vop";
- reg = <0xff940000 0x19c>;
+ reg = <0x0 0xff940000 0x0 0x19c>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
@@ -1031,7 +1050,7 @@
vopl_mmu: iommu@ff940300 {
compatible = "rockchip,iommu";
- reg = <0xff940300 0x100>;
+ reg = <0x0 0xff940300 0x0 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
power-domains = <&power RK3288_PD_VIO>;
@@ -1041,7 +1060,7 @@
mipi_dsi: mipi@ff960000 {
compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0xff960000 0x4000>;
+ reg = <0x0 0xff960000 0x0 0x4000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
clock-names = "ref", "pclk";
@@ -1069,7 +1088,7 @@
edp: dp@ff970000 {
compatible = "rockchip,rk3288-dp";
- reg = <0xff970000 0x4000>;
+ reg = <0x0 0xff970000 0x0 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
clock-names = "dp", "pclk";
@@ -1101,7 +1120,7 @@
hdmi: hdmi@ff980000 {
compatible = "rockchip,rk3288-dw-hdmi";
- reg = <0xff980000 0x20000>;
+ reg = <0x0 0xff980000 0x0 0x20000>;
reg-io-width = <4>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -1126,9 +1145,27 @@
};
};
+ vpu_mmu: iommu@ff9a0800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff9a0800 0x0 0x100>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vpu_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ hevc_mmu: iommu@ff9c0440 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hevc_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
gpu: gpu@ffa30000 {
compatible = "rockchip,rk3288-mali", "arm,mali-t760";
- reg = <0xffa30000 0x10000>;
+ reg = <0x0 0xffa30000 0x0 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -1170,72 +1207,72 @@
qos_gpu_r: qos@ffaa0000 {
compatible = "syscon";
- reg = <0xffaa0000 0x20>;
+ reg = <0x0 0xffaa0000 0x0 0x20>;
};
qos_gpu_w: qos@ffaa0080 {
compatible = "syscon";
- reg = <0xffaa0080 0x20>;
+ reg = <0x0 0xffaa0080 0x0 0x20>;
};
qos_vio1_vop: qos@ffad0000 {
compatible = "syscon";
- reg = <0xffad0000 0x20>;
+ reg = <0x0 0xffad0000 0x0 0x20>;
};
qos_vio1_isp_w0: qos@ffad0100 {
compatible = "syscon";
- reg = <0xffad0100 0x20>;
+ reg = <0x0 0xffad0100 0x0 0x20>;
};
qos_vio1_isp_w1: qos@ffad0180 {
compatible = "syscon";
- reg = <0xffad0180 0x20>;
+ reg = <0x0 0xffad0180 0x0 0x20>;
};
qos_vio0_vop: qos@ffad0400 {
compatible = "syscon";
- reg = <0xffad0400 0x20>;
+ reg = <0x0 0xffad0400 0x0 0x20>;
};
qos_vio0_vip: qos@ffad0480 {
compatible = "syscon";
- reg = <0xffad0480 0x20>;
+ reg = <0x0 0xffad0480 0x0 0x20>;
};
qos_vio0_iep: qos@ffad0500 {
compatible = "syscon";
- reg = <0xffad0500 0x20>;
+ reg = <0x0 0xffad0500 0x0 0x20>;
};
qos_vio2_rga_r: qos@ffad0800 {
compatible = "syscon";
- reg = <0xffad0800 0x20>;
+ reg = <0x0 0xffad0800 0x0 0x20>;
};
qos_vio2_rga_w: qos@ffad0880 {
compatible = "syscon";
- reg = <0xffad0880 0x20>;
+ reg = <0x0 0xffad0880 0x0 0x20>;
};
qos_vio1_isp_r: qos@ffad0900 {
compatible = "syscon";
- reg = <0xffad0900 0x20>;
+ reg = <0x0 0xffad0900 0x0 0x20>;
};
qos_video: qos@ffae0000 {
compatible = "syscon";
- reg = <0xffae0000 0x20>;
+ reg = <0x0 0xffae0000 0x0 0x20>;
};
qos_hevc_r: qos@ffaf0000 {
compatible = "syscon";
- reg = <0xffaf0000 0x20>;
+ reg = <0x0 0xffaf0000 0x0 0x20>;
};
qos_hevc_w: qos@ffaf0080 {
compatible = "syscon";
- reg = <0xffaf0080 0x20>;
+ reg = <0x0 0xffaf0080 0x0 0x20>;
};
gic: interrupt-controller@ffc01000 {
@@ -1244,16 +1281,16 @@
#interrupt-cells = <3>;
#address-cells = <0>;
- reg = <0xffc01000 0x1000>,
- <0xffc02000 0x2000>,
- <0xffc04000 0x2000>,
- <0xffc06000 0x2000>;
+ reg = <0x0 0xffc01000 0x0 0x1000>,
+ <0x0 0xffc02000 0x0 0x2000>,
+ <0x0 0xffc04000 0x0 0x2000>,
+ <0x0 0xffc06000 0x0 0x2000>;
interrupts = <GIC_PPI 9 0xf04>;
};
efuse: efuse@ffb40000 {
compatible = "rockchip,rk3288-efuse";
- reg = <0xffb40000 0x20>;
+ reg = <0x0 0xffb40000 0x0 0x20>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&cru PCLK_EFUSE256>;
@@ -1268,13 +1305,13 @@
compatible = "rockchip,rk3288-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmu>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
gpio0: gpio0@ff750000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff750000 0x100>;
+ reg = <0x0 0xff750000 0x0 0x100>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
@@ -1287,7 +1324,7 @@
gpio1: gpio1@ff780000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff780000 0x100>;
+ reg = <0x0 0xff780000 0x0 0x100>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>;
@@ -1300,7 +1337,7 @@
gpio2: gpio2@ff790000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff790000 0x100>;
+ reg = <0x0 0xff790000 0x0 0x100>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>;
@@ -1313,7 +1350,7 @@
gpio3: gpio3@ff7a0000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff7a0000 0x100>;
+ reg = <0x0 0xff7a0000 0x0 0x100>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>;
@@ -1326,7 +1363,7 @@
gpio4: gpio4@ff7b0000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff7b0000 0x100>;
+ reg = <0x0 0xff7b0000 0x0 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO4>;
@@ -1339,7 +1376,7 @@
gpio5: gpio5@ff7c0000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff7c0000 0x100>;
+ reg = <0x0 0xff7c0000 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO5>;
@@ -1352,7 +1389,7 @@
gpio6: gpio6@ff7d0000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff7d0000 0x100>;
+ reg = <0x0 0xff7d0000 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO6>;
@@ -1365,7 +1402,7 @@
gpio7: gpio7@ff7e0000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff7e0000 0x100>;
+ reg = <0x0 0xff7e0000 0x0 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO7>;
@@ -1378,7 +1415,7 @@
gpio8: gpio8@ff7f0000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff7f0000 0x100>;
+ reg = <0x0 0xff7f0000 0x0 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO8>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 58cf4ac079c3..86a57f823616 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -54,6 +54,184 @@
chosen {
stdout-path = "serial2:1500000n8";
};
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <200>;
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_core>;
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <275>;
+ i2c-scl-falling-time-ns = <16>;
+ clock-frequency = <400000>;
+
+ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_core: DCDC_REG1 {
+ regulator-name= "vdd_core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ regulator-state-uv = <900000>;
+ };
+ };
+
+ vdd_cam: DCDC_REG2 {
+ regulator-name= "vdd_cam";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-state-mem {
+ regulator-state-disabled;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name= "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name= "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ regulator-state-uv = <3300000>;
+ };
+ };
+
+ vdd_10: LDO_REG1 {
+ regulator-name= "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-state-disabled;
+ };
+ };
+
+ vcc_18: LDO_REG2 {
+ regulator-name= "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-state-disabled;
+ };
+ };
+
+ vdd10_pmu: LDO_REG3 {
+ regulator-name= "vdd10_pmu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ regulator-state-uv = <1000000>;
+ };
+ };
+ };
+ };
+
+ bma250: accelerometer@19 {
+ compatible = "bosch,bma250e";
+ reg = <0x19>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&sdmmc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
};
&uart0 {
@@ -67,3 +245,15 @@
&uart2 {
status = "okay";
};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_host_ohci {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 437098b556eb..e7cd1315db1b 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -52,6 +52,10 @@
interrupt-parent = <&gic>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -65,6 +69,33 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
+ clocks = <&cru ARMCLK>;
+ operating-points-v2 = <&cpu_opp_table>;
+ };
+ };
+
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <40000>;
};
};
@@ -154,9 +185,221 @@
status = "disabled";
};
+ i2c1: i2c@10240000 {
+ compatible = "rockchip,rv1108-i2c";
+ reg = <0x10240000 0x1000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10250000 {
+ compatible = "rockchip,rv1108-i2c";
+ reg = <0x10250000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2m1_xfer>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@10260000 {
+ compatible = "rockchip,rv1108-i2c";
+ reg = <0x10260000 0x1000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ spi: spi@10270000 {
+ compatible = "rockchip,rv1108-spi";
+ reg = <0x10270000 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&pdma 8>, <&pdma 9>;
+ #dma-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@10280000 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x10280000 0x10>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@10280010 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x10280010 0x10>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@10280020 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x10280020 0x10>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm6_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@10280030 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x10280030 0x10>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
grf: syscon@10300000 {
- compatible = "rockchip,rv1108-grf", "syscon";
+ compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
reg = <0x10300000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2-phy@100 {
+ compatible = "rockchip,rv1108-usb2phy";
+ reg = <0x100 0x0c>;
+ clocks = <&cru SCLK_USBPHY>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "usbphy";
+ rockchip,usbgrf = <&usbgrf>;
+ status = "disabled";
+
+ u2phy_otg: otg-port {
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-mux";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy_host: host-port {
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ watchdog: wdt@10360000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x10360000 0x100>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_WDT>;
+ clock-names = "pclk_wdt";
+ status = "disabled";
+ };
+
+ adc: adc@1038c000 {
+ compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
+ reg = <0x1038c000 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clock-frequency = <1000000>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ status = "disabled";
+ };
+
+ i2c0: i2c@20000000 {
+ compatible = "rockchip,rv1108-i2c";
+ reg = <0x20000000 0x1000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C0_PMU>, <&cru PCLK_I2C0_PMU>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@20040000 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20040000 0x10>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@20040010 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20040010 0x10>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@20040020 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20040020 0x10>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@20040030 {
+ compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20040030 0x10>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
};
pmugrf: syscon@20060000 {
@@ -164,6 +407,11 @@
reg = <0x20060000 0x1000>;
};
+ usbgrf: syscon@202a0000 {
+ compatible = "rockchip,rv1108-usbgrf", "syscon";
+ reg = <0x202a0000 0x1000>;
+ };
+
cru: clock-controller@20200000 {
compatible = "rockchip,rv1108-cru";
reg = <0x20200000 0x1000>;
@@ -174,37 +422,78 @@
emmc: dwmmc@30110000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
- clock-freq-min-max = <400000 150000000>;
+ reg = <0x30110000 0x4000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x30110000 0x4000>;
+ max-frequency = <150000000>;
status = "disabled";
};
sdio: dwmmc@30120000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
- clock-freq-min-max = <400000 150000000>;
+ reg = <0x30120000 0x4000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x30120000 0x4000>;
+ max-frequency = <150000000>;
status = "disabled";
};
sdmmc: dwmmc@30130000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
- clock-freq-min-max = <400000 100000000>;
+ reg = <0x30130000 0x4000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x30130000 0x4000>;
+ max-frequency = <100000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "disabled";
+ };
+
+ usb_host_ehci: usb@30140000 {
+ compatible = "generic-ehci";
+ reg = <0x30140000 0x20000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host_ohci: usb@30160000 {
+ compatible = "generic-ohci";
+ reg = <0x30160000 0x20000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_otg: usb@30180000 {
+ compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x30180000 0x40000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ g-use-dma;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
status = "disabled";
};
@@ -301,6 +590,11 @@
drive-strength = <12>;
};
+ pcfg_pull_none_smt: pcfg-pull-none-smt {
+ bias-disable;
+ input-schmitt-enable;
+ };
+
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
bias-pull-up;
drive-strength = <8>;
@@ -328,6 +622,13 @@
input-enable;
};
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>,
+ <0 RK_PB2 RK_FUNC_1 &pcfg_pull_none_smt>;
+ };
+ };
+
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
@@ -366,6 +667,54 @@
};
};
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm4 {
+ pwm4_pin: pwm4-pin {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm5 {
+ pwm5_pin: pwm5-pin {
+ rockchip,pins = <1 RK_PA7 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm6 {
+ pwm6_pin: pwm6-pin {
+ rockchip,pins = <1 RK_PB0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm7 {
+ pwm7_pin: pwm7-pin {
+ rockchip,pins = <1 RK_PB1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 60e69aeacbdb..38d2216c7ead 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -416,6 +416,17 @@
};
};
+ isc: isc@f0008000 {
+ compatible = "atmel,sama5d2-isc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ clock-names = "hclock", "iscck", "gck";
+ #clock-cells = <0>;
+ clock-output-names = "isc-mck";
+ status = "disabled";
+ };
+
ramc0: ramc@f000c000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf000c000 0x200>;
@@ -494,6 +505,24 @@
clocks = <&plla>;
};
+ audio_pll_frac: audiopll_fracck {
+ compatible = "atmel,sama5d2-clk-audio-pll-frac";
+ #clock-cells = <0>;
+ clocks = <&main>;
+ };
+
+ audio_pll_pad: audiopll_padck {
+ compatible = "atmel,sama5d2-clk-audio-pll-pad";
+ #clock-cells = <0>;
+ clocks = <&audio_pll_frac>;
+ };
+
+ audio_pll_pmc: audiopll_pmcck {
+ compatible = "atmel,sama5d2-clk-audio-pll-pmc";
+ #clock-cells = <0>;
+ clocks = <&audio_pll_frac>;
+ };
+
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
#clock-cells = <0>;
@@ -895,7 +924,7 @@
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
sdmmc0_gclk: sdmmc0_gclk {
#clock-cells = <0>;
@@ -925,6 +954,11 @@
atmel,clk-output-range = <0 83000000>;
};
+ isc_gclk: isc_gclk {
+ #clock-cells = <0>;
+ reg = <46>;
+ };
+
pdmic_gclk: pdmic_gclk {
#clock-cells = <0>;
reg = <48>;
@@ -951,9 +985,37 @@
reg = <57>;
atmel,clk-output-range = <0 80000000>;
};
+
+ classd_gclk: classd_gclk {
+ #clock-cells = <0>;
+ reg = <59>;
+ atmel,clk-output-range = <0 100000000>;
+ };
};
};
+ qspi0: spi@f0020000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi0_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ qspi1: spi@f0024000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi1_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sha@f0028000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xf0028000 0x100>;
@@ -1406,6 +1468,19 @@
status = "okay";
};
+ classd: classd@fc048000 {
+ compatible = "atmel,sama5d2-classd";
+ reg = <0xfc048000 0x100>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(47))>;
+ dma-names = "tx";
+ clocks = <&classd_clk>, <&classd_gclk>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
can1: can@fc050000 {
compatible = "bosch,m_can";
reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 54bc6d3cf290..40f4ad3c34c6 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -98,6 +98,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
status = "disabled";
};
@@ -116,6 +117,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
status = "disabled";
};
@@ -134,6 +136,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index df2232d767ed..5f347054527d 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -63,6 +63,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 6c5affe2d0f5..2310a4e97768 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -37,6 +37,14 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x300>;
+ /* cpufreq controls */
+ operating-points = <998400 0
+ 800000 0
+ 400000 0
+ 200000 0>;
+ clocks = <&prcmu_clk PRCMU_ARMSS>;
+ clock-names = "cpu";
+ clock-latency = <20000>;
};
CPU1: cpu@301 {
device_type = "cpu";
@@ -494,13 +502,6 @@
reg = <0x80157450 0xC>;
};
- cpufreq {
- compatible = "stericsson,cpufreq-ux500";
- clocks = <&prcmu_clk PRCMU_ARMSS>;
- clock-names = "armss";
- status = "disabled";
- };
-
thermal@801573c0 {
compatible = "stericsson,db8500-thermal";
reg = <0x801573c0 0x40>;
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index dcda0bbefe5b..97b1c2321ba9 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -55,7 +55,7 @@
compatible = "st,stm32429i-eval", "st,stm32f429";
chosen {
- bootargs = "root=/dev/ram rdinit=/linuxrc";
+ bootargs = "root=/dev/ram";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index ae47cde7952f..c66d617e4245 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -54,7 +54,7 @@
compatible = "st,stm32f429i-disco", "st,stm32f429";
chosen {
- bootargs = "root=/dev/ram rdinit=/linuxrc";
+ bootargs = "root=/dev/ram";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index a8113dc879cf..dd7e99b1f43b 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -361,6 +361,31 @@
status = "disabled";
};
+ dac: dac@40007400 {
+ compatible = "st,stm32f4-dac-core";
+ reg = <0x40007400 0x400>;
+ resets = <&rcc STM32F4_APB1_RESET(DAC)>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
usart7: serial@40007800 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007800 0x400>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 75470c34b92c..6ae1f037f3f0 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -53,7 +53,7 @@
compatible = "st,stm32f469i-disco", "st,stm32f469";
chosen {
- bootargs = "root=/dev/ram rdinit=/linuxrc";
+ bootargs = "root=/dev/ram";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 4506eb97a4ab..5633860037d2 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -167,6 +167,15 @@
status = "disabled";
};
+ cec: cec@40006c00 {
+ compatible = "st,stm32-cec";
+ reg = <0x40006C00 0x400>;
+ interrupts = <94>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>;
+ clock-names = "cec", "hdmi-cec";
+ status = "disabled";
+ };
+
usart7: serial@40007800 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40007800 0x400>;
@@ -336,6 +345,15 @@
st,bank-name = "GPIOK";
};
+ cec_pins_a: cec@0 {
+ pins {
+ pinmux = <STM32F746_PA15_FUNC_HDMI_CEC>;
+ slew-rate = <0>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
@@ -380,6 +398,39 @@
assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
assigned-clock-rates = <1000000>;
};
+
+ dma1: dma@40026000 {
+ compatible = "st,stm32-dma";
+ reg = <0x40026000 0x400>;
+ interrupts = <11>,
+ <12>,
+ <13>,
+ <14>,
+ <15>,
+ <16>,
+ <17>,
+ <47>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA1)>;
+ #dma-cells = <4>;
+ status = "disabled";
+ };
+
+ dma2: dma@40026400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40026400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA2)>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 166728aeb166..4463ca13a740 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -63,6 +63,12 @@
};
+&cec {
+ pinctrl-0 = <&cec_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&clk_hse {
clock-frequency = <25000000>;
};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 36a99db0a3b4..58ec2275181e 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -59,6 +59,45 @@
};
soc {
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&timer_clk>;
+ };
+
+ usart2: serial@40004400 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ status = "disabled";
+ clocks = <&timer_clk>;
+ };
+
+ dac: dac@40007400 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40007400 0x400>;
+ clocks = <&timer_clk>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channels-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011000 0x400>;
@@ -68,19 +107,91 @@
};
- usart2: serial@40004400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
- reg = <0x40004400 0x400>;
- interrupts = <38>;
+ dma1: dma@40020000 {
+ compatible = "st,stm32-dma";
+ reg = <0x40020000 0x400>;
+ interrupts = <11>,
+ <12>,
+ <13>,
+ <14>,
+ <15>,
+ <16>,
+ <17>,
+ <47>;
+ clocks = <&timer_clk>;
+ #dma-cells = <4>;
+ st,mem2mem;
status = "disabled";
+ };
+
+ dma2: dma@40020400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40020400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
clocks = <&timer_clk>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ status = "disabled";
};
- timer5: timer@40000c00 {
- compatible = "st,stm32-timer";
- reg = <0x40000c00 0x400>;
- interrupts = <50>;
+ adc_12: adc@40022000 {
+ compatible = "st,stm32h7-adc-core";
+ reg = <0x40022000 0x400>;
+ interrupts = <18>;
+ clocks = <&timer_clk>;
+ clock-names = "bus";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32h7-adc";
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_12>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ adc2: adc@100 {
+ compatible = "st,stm32h7-adc";
+ #io-channel-cells = <1>;
+ reg = <0x100>;
+ interrupt-parent = <&adc_12>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+ };
+
+ adc_3: adc@58026000 {
+ compatible = "st,stm32h7-adc-core";
+ reg = <0x58026000 0x400>;
+ interrupts = <127>;
clocks = <&timer_clk>;
+ clock-names = "bus";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc3: adc@0 {
+ compatible = "st,stm32h7-adc";
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_3>;
+ interrupts = <0>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index c6effbb36e4a..6c07786e7ddb 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -60,6 +60,24 @@
aliases {
serial0 = &usart1;
};
+
+ vdda: regulator-vdda {
+ compatible = "regulator-fixed";
+ regulator-name = "vdda";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&adc_12 {
+ vref-supply = <&vdda>;
+ status = "okay";
+ adc1: adc@0 {
+ /* potentiometer */
+ st,adc-channels = <0>;
+ status = "okay";
+ };
};
&clk_hse {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index aebc3f9dc7b6..b147cb0dc14b 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -1155,11 +1155,11 @@
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
- nmi_intc: interrupt-controller@01f00c0c {
- compatible = "allwinner,sun6i-a31-sc-nmi";
+ nmi_intc: interrupt-controller@1f00c00 {
+ compatible = "allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0x01f00c0c 0x38>;
+ reg = <0x01f00c00 0x400>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index bb510187602c..852a0aa24dce 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -271,6 +271,10 @@
status = "okay";
};
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index a8b978d0f35b..ea50dda75adc 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -519,11 +519,11 @@
#clock-cells = <1>;
};
- nmi_intc: interrupt-controller@01f00c0c {
- compatible = "allwinner,sun6i-a31-sc-nmi";
+ nmi_intc: interrupt-controller@1f00c00 {
+ compatible = "allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0x01f00c0c 0x38>;
+ reg = <0x01f00c00 0x400>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index aecdeeb368ed..1f0d60afb25b 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -43,6 +43,7 @@
/dts-v1/;
#include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
/ {
model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
@@ -57,8 +58,92 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_vcc3v0>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ bus-width = <4>;
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&reg_usb0_vbus {
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ status = "okay";
+};
+
+&reg_usb1_vbus {
+ gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp81x: pmic@3a3 {
+ compatible = "x-powers,axp818", "x-powers,axp813";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ ac100: codec@e89 {
+ compatible = "x-powers,ac100";
+ reg = <0xe89>;
+
+ ac100_codec: codec {
+ compatible = "x-powers,ac100-codec";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+ #clock-cells = <0>;
+ clock-output-names = "4M_adda";
+ };
+
+ ac100_rtc: rtc {
+ compatible = "x-powers,ac100-rtc";
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ac100_codec>;
+ #clock-cells = <1>;
+ clock-output-names = "cko1_rtc",
+ "cko2_rtc",
+ "cko3_rtc";
+ };
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
+
+&usbphy {
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
new file mode 100644
index 000000000000..2bafd7e99ef7
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Banana Pi BPI-M3";
+ compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+ status = "okay";
+
+ /* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp81x: pmic@3a3 {
+ compatible = "x-powers,axp813";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ ac100: codec@e89 {
+ compatible = "x-powers,ac100";
+ reg = <0xe89>;
+
+ ac100_codec: codec {
+ compatible = "x-powers,ac100-codec";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+ #clock-cells = <0>;
+ clock-output-names = "4M_adda";
+ };
+
+ ac100_rtc: rtc {
+ compatible = "x-powers,ac100-rtc";
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ac100_codec>;
+ #clock-cells = <1>;
+ clock-output-names = "cko1_rtc",
+ "cko2_rtc",
+ "cko3_rtc";
+ };
+ };
+};
+
+&reg_usb1_vbus {
+ gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ status = "okay";
+};
+
+&reg_vcc3v0 {
+ status = "disabled";
+};
+
+&reg_vcc5v0 {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index cff33454fc24..716a205c6dbb 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -44,6 +44,7 @@
/dts-v1/;
#include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -83,6 +84,17 @@
};
};
+ usb-hub {
+ /* I2C is not connected */
+ compatible = "smsc,usb3503";
+ initial-mode = <1>; /* initialize in HUB mode */
+ disabled-ports = <1>;
+ intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+ connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+ refclk-frequency = <19200000>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
@@ -102,6 +114,89 @@
};
};
+&ehci0 {
+ /* GL830 USB-to-SATA bridge here */
+ status = "okay";
+};
+
+&ehci1 {
+ /* USB3503 HSIC USB 2.0 hub here */
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp81x: pmic@3a3 {
+ compatible = "x-powers,axp818", "x-powers,axp813";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ ac100: codec@e89 {
+ compatible = "x-powers,ac100";
+ reg = <0xe89>;
+
+ ac100_codec: codec {
+ compatible = "x-powers,ac100-codec";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+ #clock-cells = <0>;
+ clock-output-names = "4M_adda";
+ };
+
+ ac100_rtc: rtc {
+ compatible = "x-powers,ac100-rtc";
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ac100_codec>;
+ #clock-cells = <1>;
+ clock-output-names = "cko1_rtc",
+ "cko2_rtc",
+ "cko3_rtc";
+ };
+ };
+};
+
+&reg_usb1_vbus {
+ gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+ status = "okay";
+};
+
+&reg_usb2_vbus {
+ gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ status = "okay";
+};
+
+&reg_vcc3v0 {
+ status = "disabled";
+};
+
+&reg_vcc5v0 {
+ status = "disabled";
+};
+
&spdif {
status = "okay";
};
@@ -111,3 +206,9 @@
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 19a8f4fcfab5..f996bd343e50 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/clock/sun8i-a83t-ccu.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -182,6 +183,141 @@
#dma-cells = <1>;
};
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun8i-a83t-mmc",
+ "allwinner,sun7i-a20-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@1c10000 {
+ compatible = "allwinner,sun8i-a83t-mmc",
+ "allwinner,sun7i-a20-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@1c11000 {
+ compatible = "allwinner,sun8i-a83t-emmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun8i-a83t-musb",
+ "allwinner,sun8i-a33-musb";
+ reg = <0x01c19000 0x0400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
+ usbphy: phy@1c19400 {
+ compatible = "allwinner,sun8i-a83t-usb-phy";
+ reg = <0x01c19400 0x10>,
+ <0x01c1a800 0x14>,
+ <0x01c1b800 0x14>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_HSIC>,
+ <&ccu CLK_USB_HSIC_12M>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy",
+ "usb2_hsic_12M";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_HSIC>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@1c1a000 {
+ compatible = "allwinner,sun8i-a83t-ehci",
+ "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@1c1a400 {
+ compatible = "allwinner,sun8i-a83t-ohci",
+ "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci1: usb@1c1b000 {
+ compatible = "allwinner,sun8i-a83t-ehci",
+ "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-a83t-ccu";
reg = <0x01c20000 0x400>;
@@ -212,6 +348,15 @@
bias-pull-up;
};
+ mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+ pins = "PC5", "PC6", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13",
+ "PC14", "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
spdif_tx_pin: spdif-tx-pin {
pins = "PE18";
function = "spdif";
@@ -281,6 +426,15 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ r_intc: interrupt-controller@1f00c00 {
+ compatible = "allwinner,sun8i-a83t-r-intc",
+ "allwinner,sun6i-a31-r-intc";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01f00c00 0x400>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-a83t-r-ccu";
reg = <0x01f01400 0x400>;
@@ -302,6 +456,28 @@
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
+
+ r_rsb_pins: r-rsb-pins {
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+ drive-strength = <20>;
+ bias-pull-up;
+ };
+ };
+
+ r_rsb: rsb@1f03400 {
+ compatible = "allwinner,sun8i-a83t-rsb",
+ "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_APB0_RSB>;
+ clock-frequency = <3000000>;
+ resets = <&r_ccu RST_APB0_RSB>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index e7fae65eb5d3..10da56e86ab8 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -100,6 +100,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -147,10 +151,19 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
+&reg_usb0_vbus {
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pins_a>;
@@ -163,7 +176,14 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
- /* USB VBUS is on as long as VCC-IO is on */
+ /* USB VBUS is always on except for the OTG port */
status = "okay";
+ usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
};
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
new file mode 100644
index 000000000000..eaf09666720d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -0,0 +1,321 @@
+/*
+ * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "BananaPi M2 Magic";
+ compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "bpi-m2m:blue:usr";
+ gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ green {
+ label = "bpi-m2m:green:usr";
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ red {
+ label = "bpi-m2m:red:power";
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+ opp@1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <1320000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1320000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+};
+
+&dai {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+/* This is the i2c bus exposed on the DSI connector for the touch panel */
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "disabled";
+};
+
+/* This is the i2c bus exposed on the GPIO header */
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "disabled";
+};
+
+/* This is the i2c bus exposed on the CSI connector to control the sensor */
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "disabled";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <&reg_aldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp22x: pmic@3a3 {
+ compatible = "x-powers,axp223";
+ reg = <0x3a3>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ eldoin-supply = <&reg_dcdc1>;
+ x-powers,drive-vbus-en;
+ };
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&reg_aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+ regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&sound {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_b>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
+ usb1_vbus-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 1444fbd543e7..5af4dd321952 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1122,6 +1122,16 @@
non-removable;
};
+ usb@7d000000 {
+ compatible = "nvidia,tegra114-udc";
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ };
+
usb@7d008000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 7bacb2954f58..61873d642a45 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1722,7 +1722,7 @@
lanes {
usb2-0 {
- nvidia,function = "xusb";
+ nvidia,function = "snps";
status = "okay";
};
@@ -1829,6 +1829,16 @@
};
};
+ usb@7d000000 {
+ compatible = "nvidia,tegra124-udc";
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ };
+
/* mini-PCIe USB */
usb@7d004000 {
status = "okay";
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 1b10b14a6abd..8baf00b89efb 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -87,6 +87,7 @@
clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
+ iommus = <&mc TEGRA_SWGROUP_HC>;
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index b4bfa5586c23..bfa9421fcf94 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -452,7 +452,9 @@
};
usb@c5000000 {
+ compatible = "nvidia,tegra20-udc";
status = "okay";
+ dr_mode = "peripheral";
};
usb-phy@c5000000 {
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 4f41b18d9547..3e104ddeb220 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1927,6 +1927,16 @@
non-removable;
};
+ usb@7d000000 {
+ compatible = "nvidia,tegra30-udc";
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ };
+
usb@7d004000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
index 02de56b55823..399baaa0a2ab 100644
--- a/arch/arm/boot/dts/tps65217.dtsi
+++ b/arch/arm/boot/dts/tps65217.dtsi
@@ -18,11 +18,14 @@
charger {
compatible = "ti,tps65217-charger";
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
status = "disabled";
};
pwrbutton {
compatible = "ti,tps65217-pwrbutton";
+ interrupts = <2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index 4817ebb28eb2..b3aaab354f3e 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -8,9 +8,9 @@
*/
/dts-v1/;
-/include/ "uniphier-ld4.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-ld4.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier LD4 Reference Board";
@@ -64,3 +64,7 @@
&usb1 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index fb2fd9605b9d..79183db5b386 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -270,6 +270,13 @@
interrupt-controller;
};
+ aidet: aidet@61830000 {
+ compatible = "socionext,uniphier-ld4-aidet";
+ reg = <0x61830000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
sysctrl@61840000 {
compatible = "socionext,uniphier-ld4-sysctrl",
"simple-mfd", "syscon";
@@ -285,7 +292,18 @@
#reset-cells = <1>;
};
};
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5a";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand2cs>;
+ clocks = <&sys_clk 2>;
+ };
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 96db4abc02c3..2188d114d79b 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -8,9 +8,9 @@
*/
/dts-v1/;
-/include/ "uniphier-ld6b.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-ld6b.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier LD6b Reference Board";
@@ -58,3 +58,7 @@
&i2c0 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi
index 8b9a79731bd3..9a7b25cc8233 100644
--- a/arch/arm/boot/dts/uniphier-ld6b.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi
@@ -12,7 +12,7 @@
* The D-chip (digital chip) is the same as the PXs2 die.
* Reuse the PXs2 device tree with some properties overridden.
*/
-/include/ "uniphier-pxs2.dtsi"
+#include "uniphier-pxs2.dtsi"
/ {
compatible = "socionext,uniphier-ld6b";
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index 246f35ffb638..be82cddc4072 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -4,51 +4,35 @@
* Copyright (C) 2015-2017 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
&pinctrl {
+ pinctrl_aout: aout_grp {
+ groups = "aout";
+ function = "aout";
+ };
+
pinctrl_emmc: emmc_grp {
groups = "emmc", "emmc_dat8";
function = "emmc";
};
+ pinctrl_ether_mii: ether_mii_grp {
+ groups = "ether_mii";
+ function = "ether_mii";
+ };
+
+ pinctrl_ether_rgmii: ether_rgmii_grp {
+ groups = "ether_rgmii";
+ function = "ether_rgmii";
+ };
+
+ pinctrl_ether_rmii: ether_rmii_grp {
+ groups = "ether_rmii";
+ function = "ether_rmii";
+ };
+
pinctrl_i2c0: i2c0_grp {
groups = "i2c0";
function = "i2c0";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index 11690b57931c..089419cee273 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -8,7 +8,7 @@
*/
/dts-v1/;
-/include/ "uniphier-pro4.dtsi"
+#include "uniphier-pro4.dtsi"
/ {
model = "UniPhier Pro4 Ace Board";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 4cf539245f2e..903df6348e77 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -8,9 +8,9 @@
*/
/dts-v1/;
-/include/ "uniphier-pro4.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-pro4.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier Pro4 Reference Board";
@@ -66,3 +66,7 @@
&usb3 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
index 2763cebcd76a..adef212b45b2 100644
--- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -8,7 +8,7 @@
*/
/dts-v1/;
-/include/ "uniphier-pro4.dtsi"
+#include "uniphier-pro4.dtsi"
/ {
model = "UniPhier Pro4 Sanji Board";
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 37400becf4ba..b3dbbd9b6e39 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -268,6 +268,13 @@
};
};
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-pro4-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
@@ -305,7 +312,18 @@
#reset-cells = <1>;
};
};
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5a";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ clocks = <&sys_clk 2>;
+ };
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 9577769a0add..b026bcd42a06 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -4,43 +4,7 @@
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/ {
@@ -328,7 +292,7 @@
sdctrl@59810000 {
compatible = "socionext,uniphier-pro5-sdctrl",
"simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
+ reg = <0x59810000 0x400>;
sd_clk: clock {
compatible = "socionext,uniphier-pro5-sd-clock";
@@ -367,6 +331,13 @@
};
};
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-pro5-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
@@ -404,7 +375,18 @@
#reset-cells = <1>;
};
};
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5b";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand2cs>;
+ clocks = <&sys_clk 2>;
+ };
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index 81560f75bfa7..7dfae2667f50 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -8,7 +8,7 @@
*/
/dts-v1/;
-/include/ "uniphier-pxs2.dtsi"
+#include "uniphier-pxs2.dtsi"
/ {
model = "UniPhier PXs2 Gentil Board";
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index dc2d0579c666..0cf615463a82 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -8,7 +8,7 @@
*/
/dts-v1/;
-/include/ "uniphier-pxs2.dtsi"
+#include "uniphier-pxs2.dtsi"
/ {
model = "UniPhier PXs2 Vodka Board";
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index bace751d4023..90b020c95083 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -276,7 +276,7 @@
sdctrl@59810000 {
compatible = "socionext,uniphier-pxs2-sdctrl",
"simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
+ reg = <0x59810000 0x400>;
sd_clk: clock {
compatible = "socionext,uniphier-pxs2-sd-clock";
@@ -315,6 +315,13 @@
};
};
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-pxs2-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
@@ -352,7 +359,18 @@
#reset-cells = <1>;
};
};
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5b";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand2cs>;
+ clocks = <&sys_clk 2>;
+ };
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts
deleted file mode 100644
index 70cda39a3dd2..000000000000
--- a/arch/arm/boot/dts/uniphier-sld3-ref.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Device Tree Source for UniPhier sLD3 Reference Board
- *
- * Copyright (C) 2015-2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
-
-/dts-v1/;
-/include/ "uniphier-sld3.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
-
-/ {
- model = "UniPhier sLD3 Reference Board";
- compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- };
-
- memory@8000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000
- 0xc0000000 0x20000000>;
- };
-};
-
-&ethsc {
- interrupts = <0 49 4>;
-};
-
-&serial0 {
- status = "okay";
-};
-
-&serial1 {
- status = "okay";
-};
-
-&serial2 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
-&usb2 {
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi
deleted file mode 100644
index 408287936613..000000000000
--- a/arch/arm/boot/dts/uniphier-sld3.dtsi
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Device Tree Source for UniPhier sLD3 SoC
- *
- * Copyright (C) 2015-2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
-
-/ {
- compatible = "socionext,uniphier-sld3";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- clocks {
- refclk: ref {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24576000>;
- };
-
- arm_timer_clk: arm_timer_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- timer@20000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x20000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@20000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x20000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@20001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x20001000 0x1000>,
- <0x20000100 0x100>;
- };
-
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(512 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- interrupts = <0 33 4>;
- clocks = <&sys_clk 0>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- interrupts = <0 35 4>;
- clocks = <&sys_clk 0>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- interrupts = <0 37 4>;
- clocks = <&sys_clk 0>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 41 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 42 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 43 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 44 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c4: i2c@58600000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58600000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 45 1>;
- clocks = <&sys_clk 1>;
- clock-frequency = <400000>;
- };
-
- system_bus: system-bus@58c00000 {
- compatible = "socionext,uniphier-system-bus";
- status = "disabled";
- reg = <0x58c00000 0x400>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- smpctrl@59801000 {
- compatible = "socionext,uniphier-smpctrl";
- reg = <0x59801000 0x400>;
- };
-
- mioctrl@59810000 {
- compatible = "socionext,uniphier-sld3-mioctrl",
- "simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
-
- mio_clk: clock {
- compatible = "socionext,uniphier-sld3-mio-clock";
- #clock-cells = <1>;
- };
-
- mio_rst: reset {
- compatible = "socionext,uniphier-sld3-mio-reset";
- #reset-cells = <1>;
- };
- };
-
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- interrupts = <0 80 4>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
- <&mio_rst 12>;
- };
-
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- interrupts = <0 81 4>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
- <&mio_rst 13>;
- };
-
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- interrupts = <0 82 4>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
- <&mio_rst 14>;
- };
-
- usb3: usb@5a830100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a830100 0x100>;
- interrupts = <0 83 4>;
- clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>;
- resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>,
- <&mio_rst 15>;
- };
-
- sysctrl@f1840000 {
- compatible = "socionext,uniphier-sld3-sysctrl",
- "simple-mfd", "syscon";
- reg = <0xf1840000 0x10000>;
-
- sys_clk: clock {
- compatible = "socionext,uniphier-sld3-clock";
- #clock-cells = <1>;
- };
-
- sys_rst: reset {
- compatible = "socionext,uniphier-sld3-reset";
- #reset-cells = <1>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 4536d5b71297..5accd3cc76e4 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -8,9 +8,9 @@
*/
/dts-v1/;
-/include/ "uniphier-sld8.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-sld8.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier sLD8 Reference Board";
@@ -68,3 +68,7 @@
&usb2 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 9fb9167f2db4..b08390332971 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -270,6 +270,13 @@
interrupt-controller;
};
+ aidet: aidet@61830000 {
+ compatible = "socionext,uniphier-sld8-aidet";
+ reg = <0x61830000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
sysctrl@61840000 {
compatible = "socionext,uniphier-sld8-sysctrl",
"simple-mfd", "syscon";
@@ -285,7 +292,18 @@
#reset-cells = <1>;
};
};
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5a";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand2cs>;
+ clocks = <&sys_clk 2>;
+ };
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 06e2331f666d..9abe26028c8b 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -39,7 +39,7 @@
clock-names = "apb_pclk";
};
- pci-controller@10001000 {
+ pci@10001000 {
compatible = "arm,versatile-pci";
device_type = "pci";
reg = <0x10001000 0x1000
diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts
index 081f980cfbe6..b0183c3a1d7c 100644
--- a/arch/arm/boot/dts/zx296702-ad1.dts
+++ b/arch/arm/boot/dts/zx296702-ad1.dts
@@ -18,7 +18,6 @@
};
&mmc0 {
- num-slots = <1>;
supports-highspeed;
non-removable;
disable-wp;
@@ -31,7 +30,6 @@
};
&mmc1 {
- num-slots = <1>;
supports-highspeed;
non-removable;
disable-wp;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index f3ac9bfe580e..0f79fe1ccd9d 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -42,6 +42,14 @@
};
};
+ fpga_full: fpga-full {
+ compatible = "fpga-region";
+ fpga-mgr = <&devcfg>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
pmu@f8891000 {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 5 4>, <0 6 4>;
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 64a6390fc501..0144acfa9793 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -34,7 +34,7 @@
};
chosen {
- bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+ bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
stdout-path = "serial0:115200n8";
};
};
@@ -54,6 +54,7 @@
compatible = "ethernet-phy-id0141.0e90",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
+ device_type = "ethernet-phy";
marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
<0x3 0x11 0xfff0 0xa>;
};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 0cdad2cc8b78..34e8277fce0d 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -12,7 +12,7 @@
* GNU General Public License for more details.
*/
/dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
/ {
model = "Zynq ZC702 Development Board";
@@ -30,7 +30,7 @@
};
chosen {
- bootargs = "earlycon";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -97,6 +97,7 @@
ethernet_phy: ethernet-phy@7 {
reg = <7>;
+ device_type = "ethernet-phy";
};
};
@@ -131,6 +132,21 @@
};
};
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "right";
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index ad4bb06dba25..7ebc8c5ae39d 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -12,7 +12,7 @@
* GNU General Public License for more details.
*/
/dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
/ {
model = "Zynq ZC706 Development Board";
@@ -30,7 +30,7 @@
};
chosen {
- bootargs = "earlycon";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -53,6 +53,7 @@
ethernet_phy: ethernet-phy@7 {
reg = <7>;
+ device_type = "ethernet-phy";
};
};
@@ -87,6 +88,21 @@
};
};
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "evenly";
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 325379f7983c..5e44dc12fd60 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -12,7 +12,7 @@
* GNU General Public License for more details.
*/
/dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
/ {
model = "Zynq Zed Development Board";
@@ -29,7 +29,7 @@
};
chosen {
- bootargs = "earlycon";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -50,6 +50,7 @@
ethernet_phy: ethernet-phy@0 {
reg = <0>;
+ device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index 590ec24b8749..e40cafc5ee5b 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -12,7 +12,7 @@
* GNU General Public License for more details.
*/
/dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
/ {
model = "Zynq ZYBO Development Board";
@@ -29,7 +29,7 @@
};
chosen {
- bootargs = "earlycon";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -51,6 +51,7 @@
ethernet_phy: ethernet-phy@0 {
reg = <0>;
+ device_type = "ethernet-phy";
};
};