Merge tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes that have been coming in over the last few weeks, the
  usual mix of fixes:

   - DT fixups for TI K3

   - SATA drive detection fix for TI DRA7

   - Power management fixes and a few build warning removals for OMAP

   - OP-TEE fix to use standard API for UUID exporting

   - DT fixes for a handful of i.MX boards

  And a few other smaller items"

* tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: meson: select COMMON_CLK
  soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
  ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
  bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
  ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
  ARM: dts: imx7d-pico: Fix the 'tuning-step' property
  ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
  arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
  arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
  ARM: imx: pm-imx27: Include "common.h"
  arm64: dts: zii-ultra: fix 12V_MAIN voltage
  arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
  arm64: dts: ls1028a: fix memory node
  bus: ti-sysc: Fix am335x resume hang for usb otg module
  ARM: OMAP2+: Fix build warning when mmc_omap is not built
  ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
  ARM: OMAP1: Fix use of possibly uninitialized irq variable
  optee: use export_uuid() to copy client UUID
  arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
  arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
  ...

10 files changed, 32 insertions, 23 deletions

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 7d2c72562c73..9148a01ed6d9 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -105,9 +105,13 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
-	phy-handle = <&ethphy0>;
 	status = "okay";
 
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 236fc205c389..d0768ae429fa 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -406,6 +406,18 @@
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e39784..c4e146f3341b 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210b63d0..dd8003bd1fc0 100644
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	keep-power-in-suspend;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
 	broken-cd;
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98..e519897fae08 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -351,7 +351,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	wakeup-source;
 	no-1-8-v;
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 020e6deb67c8..237e8aa9fe83 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -12,6 +12,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 
+#include "common.h"
 #include "hardware.h"
 
 static int mx27_suspend_enter(suspend_state_t state)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2ee527c00284..1026a816dcc0 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
 
 #ifdef CONFIG_LEDS_TRIGGERS
 DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
-
-static int ams_delta_camera_power(struct device *dev, int power)
-{
-	/*
-	 * turn on camera LED
-	 */
-	if (power)
-		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
-	else
-		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
-	return 0;
-}
-#else
-#define ams_delta_camera_power	NULL
 #endif
 
 static struct platform_device ams_delta_audio_device = {
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index c40cf5ef8607..977b0b744c22 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -320,7 +320,7 @@ static int tps_setup(struct i2c_client *client, void *context)
 {
 	if (!IS_BUILTIN(CONFIG_TPS65010))
 		return -ENOSYS;
-	
+
 	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
 				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
 
@@ -394,6 +394,8 @@ static void __init h2_init(void)
 	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
 	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
 
+	gpiod_add_lookup_table(&isp1301_gpiod_table);
+
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 2c1e2b32b9b3..a745d64d4699 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -655,9 +655,13 @@ static int __init omap_pm_init(void)
 		irq = INT_7XX_WAKE_UP_REQ;
 	else if (cpu_is_omap16xx())
 		irq = INT_1610_WAKE_UP_REQ;
-	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
-			NULL))
-		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	else
+		irq = -1;
+
+	if (irq >= 0) {
+		if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL))
+			pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	}
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 418a61ecb827..5e86145db0e2 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
 
 static void n8x0_mmc_callback(void *data, u8 card_mask)
 {
+#ifdef CONFIG_MMC_OMAP
 	int bit, *openp, index;
 
 	if (board_is_n800()) {
@@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
-#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 #else
 	pr_warn("MMC: notify cover event not available\n");