diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2021-07-14 14:51:54 +0300 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2021-08-13 15:51:51 +0300 |
commit | 06ce83a4dd42425100b5bbcd98425e7d732d3c7c (patch) | |
tree | 372173ef4e8ec9f3b33dca725fed0a8717eafcec /arch/arm | |
parent | e73f0f0ee7541171d89f2e2491130c7771ba58d3 (diff) | |
download | linux-06ce83a4dd42425100b5bbcd98425e7d732d3c7c.tar.xz |
ARM: ixp4xx: Delete NSLU2 boardfiles
The NSLU2 is now completely migrated to use device tree exclusively
so delete the boardfiles.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 9 | ||||
-rw-r--r-- | arch/arm/mach-ixp4xx/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-ixp4xx/nslu2-pci.c | 69 | ||||
-rw-r--r-- | arch/arm/mach-ixp4xx/nslu2-setup.c | 341 |
4 files changed, 0 insertions, 421 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index bf14d65120b9..0c3aa91da9db 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -17,15 +17,6 @@ config MACH_IXP4XX_OF help Say 'Y' here to support Device Tree-based IXP4xx platforms. -config MACH_NSLU2 - bool - prompt "Linksys NSLU2" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support Linksys's - NSLU2 NAS device. For more information on this platform, - see http://www.nslu2-linux.org - config MACH_AVILA bool "Avila" depends on IXP4XX_PCI_LEGACY diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 1fa4e6605782..cee3c4609adc 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -15,7 +15,6 @@ obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o -obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o @@ -33,7 +32,6 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o obj-$(CONFIG_MACH_MIC256) += omixp-setup.o -obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c deleted file mode 100644 index c07936a1d736..000000000000 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ /dev/null @@ -1,69 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ixp4xx/nslu2-pci.c - * - * NSLU2 board-level PCI initialization - * - * based on ixdp425-pci.c: - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Maintainer: http://www.nslu2-linux.org/ - */ - -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -#include "irqs.h" - -#define MAX_DEV 3 -#define IRQ_LINES 3 - -/* PCI controller GPIO to IRQ pin mappings */ -#define INTA 11 -#define INTB 10 -#define INTC 9 -#define INTD 8 - -void __init nslu2_pci_preinit(void) -{ - irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); - ixp4xx_pci_preinit(); -} - -static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - static int pci_irq_table[IRQ_LINES] = { - IXP4XX_GPIO_IRQ(INTA), - IXP4XX_GPIO_IRQ(INTB), - IXP4XX_GPIO_IRQ(INTC), - }; - - if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) - return pci_irq_table[(slot + pin - 2) % IRQ_LINES]; - - return -1; -} - -struct hw_pci __initdata nslu2_pci = { - .nr_controllers = 1, - .ops = &ixp4xx_ops, - .preinit = nslu2_pci_preinit, - .setup = ixp4xx_setup, - .map_irq = nslu2_map_irq, -}; - -int __init nslu2_pci_init(void) /* monkey see, monkey do */ -{ - if (machine_is_nslu2()) - pci_common_init(&nslu2_pci); - - return 0; -} - -subsys_initcall(nslu2_pci_init); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c deleted file mode 100644 index 8526a70e401b..000000000000 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ /dev/null @@ -1,341 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/arm/mach-ixp4xx/nslu2-setup.c - * - * NSLU2 board-setup - * - * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> - * - * based on ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * based on nslu2-power.c: - * Copyright (C) 2005 Tower Technologies - * - * Author: Mark Rakes <mrakes at mac.com> - * Author: Rod Whitby <rod@whitby.id.au> - * Author: Alessandro Zummo <a.zummo@towertech.it> - * Maintainers: http://www.nslu2-linux.org/ - * - */ -#include <linux/gpio.h> -#include <linux/if_ether.h> -#include <linux/irq.h> -#include <linux/serial.h> -#include <linux/serial_8250.h> -#include <linux/leds.h> -#include <linux/reboot.h> -#include <linux/i2c.h> -#include <linux/gpio/machine.h> -#include <linux/io.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/time.h> -#include <mach/hardware.h> - -#include "irqs.h" - -#define NSLU2_SDA_PIN 7 -#define NSLU2_SCL_PIN 6 - -/* NSLU2 Timer */ -#define NSLU2_FREQ 66000000 - -/* Buttons */ -#define NSLU2_PB_GPIO 5 /* power button */ -#define NSLU2_PO_GPIO 8 /* power off */ -#define NSLU2_RB_GPIO 12 /* reset button */ - -/* Buzzer */ -#define NSLU2_GPIO_BUZZ 4 - -/* LEDs */ -#define NSLU2_LED_RED_GPIO 0 -#define NSLU2_LED_GRN_GPIO 1 -#define NSLU2_LED_DISK1_GPIO 3 -#define NSLU2_LED_DISK2_GPIO 2 - -static struct flash_platform_data nslu2_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource nslu2_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nslu2_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev.platform_data = &nslu2_flash_data, - .num_resources = 1, - .resource = &nslu2_flash_resource, -}; - -static struct gpiod_lookup_table nslu2_i2c_gpiod_table = { - .dev_id = "i2c-gpio.0", - .table = { - GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct i2c_board_info __initdata nslu2_i2c_board_info [] = { - { - I2C_BOARD_INFO("x1205", 0x6f), - }, -}; - -static struct gpio_led nslu2_led_pins[] = { - { - .name = "nslu2:green:ready", - .gpio = NSLU2_LED_GRN_GPIO, - }, - { - .name = "nslu2:red:status", - .gpio = NSLU2_LED_RED_GPIO, - }, - { - .name = "nslu2:green:disk-1", - .gpio = NSLU2_LED_DISK1_GPIO, - .active_low = true, - }, - { - .name = "nslu2:green:disk-2", - .gpio = NSLU2_LED_DISK2_GPIO, - .active_low = true, - }, -}; - -static struct gpio_led_platform_data nslu2_led_data = { - .num_leds = ARRAY_SIZE(nslu2_led_pins), - .leds = nslu2_led_pins, -}; - -static struct platform_device nslu2_leds = { - .name = "leds-gpio", - .id = -1, - .dev.platform_data = &nslu2_led_data, -}; - -static struct platform_device nslu2_i2c_gpio = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -static struct resource nslu2_beeper_resources[] = { - { - .start = IRQ_IXP4XX_TIMER2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device nslu2_beeper = { - .name = "ixp4xx-beeper", - .id = NSLU2_GPIO_BUZZ, - .resource = nslu2_beeper_resources, - .num_resources = ARRAY_SIZE(nslu2_beeper_resources), -}; - -static struct resource nslu2_uart_resources[] = { - { - .start = IXP4XX_UART1_BASE_PHYS, - .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, - { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - } -}; - -static struct plat_serial8250_port nslu2_uart_data[] = { - { - .mapbase = IXP4XX_UART1_BASE_PHYS, - .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { } -}; - -static struct platform_device nslu2_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = nslu2_uart_data, - .num_resources = 2, - .resource = nslu2_uart_resources, -}; - -/* Built-in 10/100 Ethernet MAC interfaces */ -static struct resource nslu2_eth_resources[] = { - { - .start = IXP4XX_EthB_BASE_PHYS, - .end = IXP4XX_EthB_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct eth_plat_info nslu2_plat_eth[] = { - { - .phy = 1, - .rxq = 3, - .txreadyq = 20, - } -}; - -static struct platform_device nslu2_eth[] = { - { - .name = "ixp4xx_eth", - .id = IXP4XX_ETH_NPEB, - .dev.platform_data = nslu2_plat_eth, - .num_resources = ARRAY_SIZE(nslu2_eth_resources), - .resource = nslu2_eth_resources, - } -}; - -static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_gpio, - &nslu2_flash, - &nslu2_beeper, - &nslu2_leds, - &nslu2_eth[0], -}; - -static void nslu2_power_off(void) -{ - /* This causes the box to drop the power and go dead. */ - - /* enable the pwr cntl gpio and assert power off */ - gpio_direction_output(NSLU2_PO_GPIO, 1); -} - -static irqreturn_t nslu2_power_handler(int irq, void *dev_id) -{ - /* Signal init to do the ctrlaltdel action, this will bypass init if - * it hasn't started and do a kernel_restart. - */ - ctrl_alt_del(); - - return IRQ_HANDLED; -} - -static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) -{ - /* This is the paper-clip reset, it shuts the machine down directly. - */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init nslu2_gpio_init(void) -{ - if (!machine_is_nslu2()) - return 0; - - /* Request the power off GPIO */ - return gpio_request(NSLU2_PO_GPIO, "power off"); -} -device_initcall(nslu2_gpio_init); - -static void __init nslu2_timer_init(void) -{ - /* The xtal on this machine is non-standard. */ - ixp4xx_timer_freq = NSLU2_FREQ; - - /* Call standard timer_init function. */ - ixp4xx_timer_init(); -} - -static void __init nslu2_init(void) -{ - uint8_t __iomem *f; - int i; - - ixp4xx_sys_init(); - - nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); - nslu2_flash_resource.end = - IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - - gpiod_add_lookup_table(&nslu2_i2c_gpiod_table); - i2c_register_board_info(0, nslu2_i2c_board_info, - ARRAY_SIZE(nslu2_i2c_board_info)); - - /* - * This is only useful on a modified machine, but it is valuable - * to have it first in order to see debug messages, and so that - * it does *not* get removed if platform_add_devices fails! - */ - (void)platform_device_register(&nslu2_uart); - - platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); - - pm_power_off = nslu2_power_off; - - if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler, - IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - gpio_to_irq(NSLU2_RB_GPIO)); - } - - if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler, - IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) { - - printk(KERN_DEBUG "Power Button IRQ %d not available\n", - gpio_to_irq(NSLU2_PB_GPIO)); - } - - /* - * Map in a portion of the flash and read the MAC address. - * Since it is stored in BE in the flash itself, we need to - * byteswap it if we're in LE mode. - */ - f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000); - if (f) { - for (i = 0; i < 6; i++) -#ifdef __ARMEB__ - nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i); -#else - nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3)); -#endif - iounmap(f); - } - printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n", - nslu2_plat_eth[0].hwaddr); - -} - -MACHINE_START(NSLU2, "Linksys NSLU2") - /* Maintainer: www.nslu2-linux.org */ - .atag_offset = 0x100, - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = nslu2_timer_init, - .init_machine = nslu2_init, -#if defined(CONFIG_PCI) - .dma_zone_size = SZ_64M, -#endif - .restart = ixp4xx_restart, -MACHINE_END |