summaryrefslogtreecommitdiff
path: root/arch/microblaze
diff options
context:
space:
mode:
authorAppana Durga Kedareswara rao <appana.durga.rao@xilinx.com>2022-06-27 09:40:24 +0300
committerMichal Simek <michal.simek@amd.com>2022-09-26 15:13:29 +0300
commitadc4cefae9cfafc1c88b789021266d6f09a0ecef (patch)
treed4350a714f8ff5fa339ba06dffce6e5cdcc5151d /arch/microblaze
parent88707ebe77e23e856981e597f322cabbf6415662 (diff)
downloadlinux-adc4cefae9cfafc1c88b789021266d6f09a0ecef.tar.xz
microblaze: Add support for error injection
To inject the error using the tmr inject IP reset vectors need to be placed in lmb(bram) due to the limitation in HW when this code runs out of DDR. Below code adds the error inject code to the .init.ivt section to copy it in machine_early_init to lmb/Bram location. C_BASE_VECTORS which allow moving reset vectors out of 0 location is not currently supported by Microblaze architecture, that's why all the time reset vectors with injection code is all the time copied to address 0. As of now getting this functionality working CPU switches to real mode and simply jumps to bram, which causes triggering of fault which continues to call_xmb_manager_break break handler which will at the end calls the error count callback function and performs recovery. Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Link: https://lore.kernel.org/r/20220627064024.771037-4-appana.durga.rao@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
Diffstat (limited to 'arch/microblaze')
-rw-r--r--arch/microblaze/include/asm/xilinx_mb_manager.h8
-rw-r--r--arch/microblaze/kernel/entry.S52
2 files changed, 60 insertions, 0 deletions
diff --git a/arch/microblaze/include/asm/xilinx_mb_manager.h b/arch/microblaze/include/asm/xilinx_mb_manager.h
index 392c3aa278dc..7b6995722b0c 100644
--- a/arch/microblaze/include/asm/xilinx_mb_manager.h
+++ b/arch/microblaze/include/asm/xilinx_mb_manager.h
@@ -5,6 +5,8 @@
#ifndef _XILINX_MB_MANAGER_H
#define _XILINX_MB_MANAGER_H
+# ifndef __ASSEMBLY__
+
#include <linux/of_address.h>
/*
@@ -17,5 +19,11 @@
void xmb_manager_register(uintptr_t phys_baseaddr, u32 cr_val,
void (*callback)(void *data),
void *priv, void (*reset_callback)(void *data));
+asmlinkage void xmb_inject_err(void);
+
+# endif /* __ASSEMBLY__ */
+
+/* Error injection offset */
+#define XMB_INJECT_ERR_OFFSET 0x200
#endif /* _XILINX_MB_MANAGER_H */
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 4bf9cec516bc..582d7256d815 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -27,6 +27,7 @@
#include <asm/page.h>
#include <asm/unistd.h>
+#include <asm/xilinx_mb_manager.h>
#include <linux/errno.h>
#include <asm/signal.h>
@@ -1151,6 +1152,41 @@ ENTRY(_switch_to)
nop
#ifdef CONFIG_MB_MANAGER
+.global xmb_inject_err
+.section .text
+.align 2
+.ent xmb_inject_err
+.type xmb_inject_err, @function
+xmb_inject_err:
+ addik r1, r1, -PT_SIZE
+ SAVE_REGS
+
+ /* Switch to real mode */
+ VM_OFF;
+ set_bip;
+ mbar 1
+ mbar 2
+ bralid r15, XMB_INJECT_ERR_OFFSET
+ nop;
+
+ /* enable virtual mode */
+ set_vms;
+ /* barrier for instructions and data accesses */
+ mbar 1
+ mbar 2
+ /*
+ * Enable Interrupts, Virtual Protected Mode, equalize
+ * initial state for all possible entries.
+ */
+ rtbd r0, 1f
+ nop;
+1:
+ RESTORE_REGS
+ addik r1, r1, PT_SIZE
+ rtsd r15, 8;
+ nop;
+.end xmb_inject_err
+
.section .data
.global xmb_manager_dev
.global xmb_manager_baseaddr
@@ -1225,6 +1261,22 @@ ENTRY(_reset)
.org 0x20
brai TOPHYS(_hw_exception_handler); /* HW exception handler */
+#ifdef CONFIG_MB_MANAGER
+ /*
+ * For TMR Inject API which injects the error should
+ * be executed from LMB.
+ * TMR Inject is programmed with address of 0x200 so that
+ * when program counter matches with this address error will
+ * be injected. 0x200 is expected to be next available bram
+ * offset, hence used for this api.
+ */
+ .org XMB_INJECT_ERR_OFFSET
+xmb_inject_error:
+ nop
+ rtsd r15, 8
+ nop
+#endif
+
.section .rodata,"a"
#include "syscall_table.S"