diff options
author | Ladislav Michl <ladis@linux-mips.org> | 2023-06-19 23:13:38 +0300 |
---|---|---|
committer | Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 2023-06-23 16:06:40 +0300 |
commit | 2257c6c90e9223e00d0e37ec721c86f45d8ba1d9 (patch) | |
tree | 9e9d96e01f01258a37a5b65b2ce1303d314c64ad /arch/mips/cavium-octeon | |
parent | 793bef570951431cdf257b637fcb21356d7faec9 (diff) | |
download | linux-2257c6c90e9223e00d0e37ec721c86f45d8ba1d9.tar.xz |
MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
Move all register access code into separate functions and
provide their no-op version for non Octeon platforms.
Later it might be possible to replace them with standard
Linux functions, however datasheets are not publicly available
and I have only one Octeon board to test, so lets stay on safe
side for now.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Diffstat (limited to 'arch/mips/cavium-octeon')
-rw-r--r-- | arch/mips/cavium-octeon/octeon-usb.c | 99 |
1 files changed, 59 insertions, 40 deletions
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c index 0f9800b3d373..aaddc874f0ca 100644 --- a/arch/mips/cavium-octeon/octeon-usb.c +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -17,8 +17,6 @@ #include <linux/mutex.h> #include <linux/of_platform.h> -#include <asm/octeon/octeon.h> - /* * USB Control Register */ @@ -196,6 +194,17 @@ static DEFINE_MUTEX(dwc3_octeon_clocks_mutex); static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32}; +#ifdef CONFIG_CAVIUM_OCTEON_SOC +#include <asm/octeon/octeon.h> +static inline uint64_t dwc3_octeon_readq(void __iomem *addr) +{ + return cvmx_readq_csr(addr); +} + +static inline void dwc3_octeon_writeq(void __iomem *base, uint64_t val) +{ + cvmx_writeq_csr(base, val); +} static void dwc3_octeon_config_gpio(int index, int gpio) { @@ -220,14 +229,24 @@ static void dwc3_octeon_config_gpio(int index, int gpio) cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64); } } +#else +static inline uint64_t dwc3_octeon_readq(void __iomem *addr) +{ + return 0; +} + +static inline void dwc3_octeon_writeq(void __iomem *base, uint64_t val) { } + +static inline void dwc3_octeon_config_gpio(int index, int gpio) { } +#endif -static int dwc3_octeon_config_power(struct device *dev, u64 base) +static int dwc3_octeon_config_power(struct device *dev, void __iomem *base) { uint32_t gpio_pwr[3]; int gpio, len, power_active_low; struct device_node *node = dev->of_node; u64 val; - u64 uctl_host_cfg_reg = base + USBDRD_UCTL_HOST_CFG; + void __iomem *uctl_host_cfg_reg = base + USBDRD_UCTL_HOST_CFG; if (of_find_property(node, "power", &len) != NULL) { if (len == 12) { @@ -242,33 +261,33 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base) dev_err(dev, "invalid power configuration\n"); return -EINVAL; } - dwc3_octeon_config_gpio((base >> 24) & 1, gpio); + dwc3_octeon_config_gpio(((u64)base >> 24) & 1, gpio); /* Enable XHCI power control and set if active high or low. */ - val = cvmx_read_csr(uctl_host_cfg_reg); + val = dwc3_octeon_readq(uctl_host_cfg_reg); val |= USBDRD_UCTL_HOST_PPC_EN; if (power_active_low) val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; else val |= USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; - cvmx_write_csr(uctl_host_cfg_reg, val); + dwc3_octeon_writeq(uctl_host_cfg_reg, val); } else { /* Disable XHCI power control and set if active high. */ - val = cvmx_read_csr(uctl_host_cfg_reg); + val = dwc3_octeon_readq(uctl_host_cfg_reg); val &= ~USBDRD_UCTL_HOST_PPC_EN; val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; - cvmx_write_csr(uctl_host_cfg_reg, val); + dwc3_octeon_writeq(uctl_host_cfg_reg, val); dev_info(dev, "power control disabled\n"); } return 0; } -static int dwc3_octeon_clocks_start(struct device *dev, u64 base) +static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base) { int i, mpll_mul, ref_clk_fsel, ref_clk_sel = 2; u32 clock_rate; u64 div, h_clk_rate, val; - u64 uctl_ctl_reg = base + USBDRD_UCTL_CTL; + void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL; if (dev->of_node) { const char *ss_clock_type; @@ -332,16 +351,16 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */ /* Step 3: Assert all resets. */ - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val |= USBDRD_UCTL_CTL_UPHY_RST | USBDRD_UCTL_CTL_UAHC_RST | USBDRD_UCTL_CTL_UCTL_RST; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 4a: Reset the clock dividers. */ - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val |= USBDRD_UCTL_CTL_H_CLKDIV_RST; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 4b: Select controller clock frequency. */ for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) { @@ -350,12 +369,12 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) h_clk_rate >= OCTEON_MIN_H_CLK_RATE) break; } - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val &= ~USBDRD_UCTL_CTL_H_CLKDIV_SEL; val |= FIELD_PREP(USBDRD_UCTL_CTL_H_CLKDIV_SEL, div); val |= USBDRD_UCTL_CTL_H_CLK_EN; - cvmx_write_csr(uctl_ctl_reg, val); - val = cvmx_read_csr(uctl_ctl_reg); + dwc3_octeon_writeq(uctl_ctl_reg, val); + val = dwc3_octeon_readq(uctl_ctl_reg); if ((div != FIELD_GET(USBDRD_UCTL_CTL_H_CLKDIV_SEL, val)) || (!(FIELD_GET(USBDRD_UCTL_CTL_H_CLK_EN, val)))) { dev_err(dev, "dwc3 controller clock init failure.\n"); @@ -364,10 +383,10 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) /* Step 4c: Deassert the controller clock divider reset. */ val &= ~USBDRD_UCTL_CTL_H_CLKDIV_RST; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 5a: Reference clock configuration. */ - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val &= ~USBDRD_UCTL_CTL_REF_CLK_DIV2; val &= ~USBDRD_UCTL_CTL_REF_CLK_SEL; val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_SEL, ref_clk_sel); @@ -407,15 +426,15 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) /* Step 6a & 6b: Power up PHYs. */ val |= USBDRD_UCTL_CTL_HS_POWER_EN; val |= USBDRD_UCTL_CTL_SS_POWER_EN; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 7: Wait 10 controller-clock cycles to take effect. */ udelay(10); /* Step 8a: Deassert UCTL reset signal. */ - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val &= ~USBDRD_UCTL_CTL_UCTL_RST; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 8b: Wait 10 controller-clock cycles. */ udelay(10); @@ -425,49 +444,49 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) return -EINVAL; /* Step 8d: Deassert UAHC reset signal. */ - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val &= ~USBDRD_UCTL_CTL_UAHC_RST; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 8e: Wait 10 controller-clock cycles. */ udelay(10); /* Step 9: Enable conditional coprocessor clock of UCTL. */ - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val |= USBDRD_UCTL_CTL_CSCLK_EN; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); /*Step 10: Set for host mode only. */ - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val &= ~USBDRD_UCTL_CTL_DRD_MODE; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); return 0; } -static void __init dwc3_octeon_set_endian_mode(u64 base) +static void __init dwc3_octeon_set_endian_mode(void __iomem *base) { u64 val; - u64 uctl_shim_cfg_reg = base + USBDRD_UCTL_SHIM_CFG; + void __iomem *uctl_shim_cfg_reg = base + USBDRD_UCTL_SHIM_CFG; - val = cvmx_read_csr(uctl_shim_cfg_reg); + val = dwc3_octeon_readq(uctl_shim_cfg_reg); val &= ~USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE; val &= ~USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE; #ifdef __BIG_ENDIAN val |= FIELD_PREP(USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1); val |= FIELD_PREP(USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1); #endif - cvmx_write_csr(uctl_shim_cfg_reg, val); + dwc3_octeon_writeq(uctl_shim_cfg_reg, val); } -static void __init dwc3_octeon_phy_reset(u64 base) +static void __init dwc3_octeon_phy_reset(void __iomem *base) { u64 val; - u64 uctl_ctl_reg = base + USBDRD_UCTL_CTL; + void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL; - val = cvmx_read_csr(uctl_ctl_reg); + val = dwc3_octeon_readq(uctl_ctl_reg); val &= ~USBDRD_UCTL_CTL_UPHY_RST; - cvmx_write_csr(uctl_ctl_reg, val); + dwc3_octeon_writeq(uctl_ctl_reg, val); } static int __init dwc3_octeon_device_init(void) @@ -506,10 +525,10 @@ static int __init dwc3_octeon_device_init(void) } mutex_lock(&dwc3_octeon_clocks_mutex); - if (dwc3_octeon_clocks_start(&pdev->dev, (u64)base) == 0) + if (dwc3_octeon_clocks_start(&pdev->dev, base) == 0) dev_info(&pdev->dev, "clocks initialized.\n"); - dwc3_octeon_set_endian_mode((u64)base); - dwc3_octeon_phy_reset((u64)base); + dwc3_octeon_set_endian_mode(base); + dwc3_octeon_phy_reset(base); mutex_unlock(&dwc3_octeon_clocks_mutex); devm_iounmap(&pdev->dev, base); devm_release_mem_region(&pdev->dev, res->start, |