summaryrefslogtreecommitdiff
path: root/arch/mips/sgi-ip27
diff options
context:
space:
mode:
authorThomas Bogendoerfer <tbogendoerfer@suse.de>2019-02-19 18:57:20 +0300
committerPaul Burton <paul.burton@mips.com>2019-02-19 23:46:03 +0300
commit69a07a41d908f9df48393bbab179daded8cfab66 (patch)
tree6764897f28cee05ecd539010ce61c4138b3bfdc5 /arch/mips/sgi-ip27
parent2c8656204742a5e2d373972b139d0cc26ae93ff0 (diff)
downloadlinux-69a07a41d908f9df48393bbab179daded8cfab66.tar.xz
MIPS: SGI-IP27: rework HUB interrupts
This commit rearranges the HUB interrupt code by using MIPS_IRQ_CPU interrupt handling code and modern Linux IRQ framework features to get rid of global arrays. It also adds support for irq affinity setting. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
Diffstat (limited to 'arch/mips/sgi-ip27')
-rw-r--r--arch/mips/sgi-ip27/Makefile3
-rw-r--r--arch/mips/sgi-ip27/ip27-init.c33
-rw-r--r--arch/mips/sgi-ip27/ip27-irq-pci.c264
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c357
-rw-r--r--arch/mips/sgi-ip27/ip27-irqno.c48
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c42
6 files changed, 250 insertions, 497 deletions
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index 73502fda13ee..27c14ede191e 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -3,10 +3,9 @@
# Makefile for the IP27 specific kernel interface routines under Linux.
#
-obj-y := ip27-berr.o ip27-irq.o ip27-irqno.o ip27-init.o ip27-klconfig.o \
+obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \
ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \
ip27-hubio.o ip27-xtalk.o
obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
-obj-$(CONFIG_PCI) += ip27-irq-pci.o
obj-$(CONFIG_SMP) += ip27-smp.o
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index e6fa9d0c708a..6074efeff894 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -56,7 +56,6 @@ static void per_hub_init(cnodeid_t cnode)
{
struct hub_data *hub = hub_data(cnode);
nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
- int i;
cpumask_set_cpu(smp_processor_id(), &hub->h_cpus);
@@ -87,24 +86,6 @@ static void per_hub_init(cnodeid_t cnode)
__flush_cache_all();
}
#endif
-
- /*
- * Some interrupts are reserved by hardware or by software convention.
- * Mark these as reserved right away so they won't be used accidentally
- * later.
- */
- for (i = 0; i <= BASE_PCI_IRQ; i++) {
- __set_bit(i, hub->irq_alloc_mask);
- LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i);
- }
-
- __set_bit(IP_PEND0_6_63, hub->irq_alloc_mask);
- LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
-
- for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
- __set_bit(i, hub->irq_alloc_mask);
- LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i);
- }
}
void per_cpu_init(void)
@@ -113,8 +94,6 @@ void per_cpu_init(void)
int slice = LOCAL_HUB_L(PI_CPU_NUM);
cnodeid_t cnode = get_compact_nodeid();
struct hub_data *hub = hub_data(cnode);
- struct slice_data *si = hub->slice + slice;
- int i;
if (test_and_set_bit(slice, &hub->slice_map))
return;
@@ -123,22 +102,14 @@ void per_cpu_init(void)
per_hub_init(cnode);
- for (i = 0; i < LEVELS_PER_SLICE; i++)
- si->level_to_irq[i] = -1;
-
- /*
- * We use this so we can find the local hub's data as fast as only
- * possible.
- */
- cpu_data[cpu].data = si;
-
cpu_time_init();
install_ipi();
/* Install our NMI handler if symmon hasn't installed one. */
install_cpu_nmi_handler(cputoslice(cpu));
- set_c0_status(SRB_DEV0 | SRB_DEV1);
+ enable_percpu_irq(IP27_HUB_PEND0_IRQ, IRQ_TYPE_NONE);
+ enable_percpu_irq(IP27_HUB_PEND1_IRQ, IRQ_TYPE_NONE);
}
/*
diff --git a/arch/mips/sgi-ip27/ip27-irq-pci.c b/arch/mips/sgi-ip27/ip27-irq-pci.c
deleted file mode 100644
index a00a23b32a2a..000000000000
--- a/arch/mips/sgi-ip27/ip27-irq-pci.c
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
- *
- * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 1999 - 2001 Kanoj Sarcar
- */
-
-#undef DEBUG
-
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/smp.h>
-#include <linux/random.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-
-#include <asm/processor.h>
-#include <asm/pci/bridge.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/agent.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
-#include <asm/sn/intr.h>
-
-/*
- * Linux has a controller-independent x86 interrupt architecture.
- * every controller has a 'controller-template', that is used
- * by the main code to do the right thing. Each driver-visible
- * interrupt source is transparently wired to the appropriate
- * controller. Thus drivers need not be aware of the
- * interrupt-controller.
- *
- * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
- * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
- * (IO-APICs assumed to be messaging to Pentium local-APICs)
- *
- * the code is designed to be easily extended with new/different
- * interrupt controllers, without having to do assembly magic.
- */
-
-extern struct bridge_controller *irq_to_bridge[];
-extern int irq_to_slot[];
-
-/*
- * use these macros to get the encoded nasid and widget id
- * from the irq value
- */
-#define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)]
-#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i]
-
-static inline int alloc_level(int cpu, int irq)
-{
- struct hub_data *hub = hub_data(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
- int level;
-
- level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
- if (level >= LEVELS_PER_SLICE)
- panic("Cpu %d flooded with devices", cpu);
-
- __set_bit(level, hub->irq_alloc_mask);
- si->level_to_irq[level] = irq;
-
- return level;
-}
-
-static inline int find_level(cpuid_t *cpunum, int irq)
-{
- int cpu, i;
-
- for_each_online_cpu(cpu) {
- struct slice_data *si = cpu_data[cpu].data;
-
- for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
- if (si->level_to_irq[i] == irq) {
- *cpunum = cpu;
-
- return i;
- }
- }
-
- panic("Could not identify cpu/level for irq %d", irq);
-}
-
-static int intr_connect_level(int cpu, int bit)
-{
- nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
-
- set_bit(bit, si->irq_enable_mask);
-
- if (!cputoslice(cpu)) {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
- } else {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
- }
-
- return 0;
-}
-
-static int intr_disconnect_level(int cpu, int bit)
-{
- nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
-
- clear_bit(bit, si->irq_enable_mask);
-
- if (!cputoslice(cpu)) {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
- } else {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
- }
-
- return 0;
-}
-
-/* Startup one of the (PCI ...) IRQs routes over a bridge. */
-static unsigned int startup_bridge_irq(struct irq_data *d)
-{
- struct bridge_controller *bc;
- int pin, swlevel;
- cpuid_t cpu;
- u64 device;
-
- pin = SLOT_FROM_PCI_IRQ(d->irq);
- bc = IRQ_TO_BRIDGE(d->irq);
-
- pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", d->irq, pin);
- /*
- * "map" irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- swlevel = find_level(&cpu, d->irq);
- bridge_write(bc, b_int_addr[pin].addr,
- (0x20000 | swlevel | (bc->nasid << 8)));
- bridge_set(bc, b_int_enable, (1 << pin));
- bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
-
- /*
- * Enable sending of an interrupt clear packt to the hub on a high to
- * low transition of the interrupt pin.
- *
- * IRIX sets additional bits in the address which are documented as
- * reserved in the bridge docs.
- */
- bridge_set(bc, b_int_mode, (1UL << pin));
-
- /*
- * We assume the bridge to have a 1:1 mapping between devices
- * (slots) and intr pins.
- */
- device = bridge_read(bc, b_int_device);
- device &= ~(7 << (pin*3));
- device |= (pin << (pin*3));
- bridge_write(bc, b_int_device, device);
-
- bridge_read(bc, b_wid_tflush);
-
- intr_connect_level(cpu, swlevel);
-
- return 0; /* Never anything pending. */
-}
-
-/* Shutdown one of the (PCI ...) IRQs routes over a bridge. */
-static void shutdown_bridge_irq(struct irq_data *d)
-{
- struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
- int pin, swlevel;
- cpuid_t cpu;
-
- pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
- pin = SLOT_FROM_PCI_IRQ(d->irq);
-
- /*
- * map irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- swlevel = find_level(&cpu, d->irq);
- intr_disconnect_level(cpu, swlevel);
-
- bridge_clr(bc, b_int_enable, (1 << pin));
- bridge_read(bc, b_wid_tflush);
-}
-
-static inline void enable_bridge_irq(struct irq_data *d)
-{
- cpuid_t cpu;
- int swlevel;
-
- swlevel = find_level(&cpu, d->irq); /* Criminal offence */
- intr_connect_level(cpu, swlevel);
-}
-
-static inline void disable_bridge_irq(struct irq_data *d)
-{
- cpuid_t cpu;
- int swlevel;
-
- swlevel = find_level(&cpu, d->irq); /* Criminal offence */
- intr_disconnect_level(cpu, swlevel);
-}
-
-static struct irq_chip bridge_irq_type = {
- .name = "bridge",
- .irq_startup = startup_bridge_irq,
- .irq_shutdown = shutdown_bridge_irq,
- .irq_mask = disable_bridge_irq,
- .irq_unmask = enable_bridge_irq,
-};
-
-void register_bridge_irq(unsigned int irq)
-{
- irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
-}
-
-int request_bridge_irq(struct bridge_controller *bc)
-{
- int irq = allocate_irqno();
- int swlevel, cpu;
- nasid_t nasid;
-
- if (irq < 0)
- return irq;
-
- /*
- * "map" irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- cpu = bc->irq_cpu;
- swlevel = alloc_level(cpu, irq);
- if (unlikely(swlevel < 0)) {
- free_irqno(irq);
-
- return -EAGAIN;
- }
-
- /* Make sure it's not already pending when we connect it. */
- nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- REMOTE_HUB_CLR_INTR(nasid, swlevel);
-
- intr_connect_level(cpu, swlevel);
-
- register_bridge_irq(irq);
-
- return irq;
-}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index f37155ef7ed9..710a59764b01 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -7,67 +7,234 @@
* Copyright (C) 1999 - 2001 Kanoj Sarcar
*/
-#undef DEBUG
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/smp.h>
-#include <linux/random.h>
#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
#include <linux/bitops.h>
-#include <asm/bootinfo.h>
#include <asm/io.h>
-#include <asm/mipsregs.h>
-
-#include <asm/processor.h>
+#include <asm/irq_cpu.h>
+#include <asm/pci/bridge.h>
#include <asm/sn/addrs.h>
#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
-/*
- * Linux has a controller-independent x86 interrupt architecture.
- * every controller has a 'controller-template', that is used
- * by the main code to do the right thing. Each driver-visible
- * interrupt source is transparently wired to the appropriate
- * controller. Thus drivers need not be aware of the
- * interrupt-controller.
- *
- * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
- * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
- * (IO-APICs assumed to be messaging to Pentium local-APICs)
- *
- * the code is designed to be easily extended with new/different
- * interrupt controllers, without having to do assembly magic.
- */
+struct hub_irq_data {
+ struct bridge_controller *bc;
+ u64 *irq_mask[2];
+ cpuid_t cpu;
+ int bit;
+ int pin;
+};
-extern asmlinkage void ip27_irq(void);
+static DECLARE_BITMAP(hub_irq_map, IP27_HUB_IRQ_COUNT);
-/*
- * Find first bit set
- */
-static int ms1bit(unsigned long x)
+static DEFINE_PER_CPU(unsigned long [2], irq_enable_mask);
+
+static inline int alloc_level(void)
+{
+ int level;
+
+again:
+ level = find_first_zero_bit(hub_irq_map, IP27_HUB_IRQ_COUNT);
+ if (level >= IP27_HUB_IRQ_COUNT)
+ return -ENOSPC;
+
+ if (test_and_set_bit(level, hub_irq_map))
+ goto again;
+
+ return level;
+}
+
+static void enable_hub_irq(struct irq_data *d)
+{
+ struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
+ unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
+
+ set_bit(hd->bit, mask);
+ __raw_writeq(mask[0], hd->irq_mask[0]);
+ __raw_writeq(mask[1], hd->irq_mask[1]);
+}
+
+static void disable_hub_irq(struct irq_data *d)
+{
+ struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
+ unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
+
+ clear_bit(hd->bit, mask);
+ __raw_writeq(mask[0], hd->irq_mask[0]);
+ __raw_writeq(mask[1], hd->irq_mask[1]);
+}
+
+static unsigned int startup_bridge_irq(struct irq_data *d)
+{
+ struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
+ struct bridge_controller *bc;
+ nasid_t nasid;
+ u32 device;
+ int pin;
+
+ if (!hd)
+ return -EINVAL;
+
+ pin = hd->pin;
+ bc = hd->bc;
+
+ nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(hd->cpu));
+ bridge_write(bc, b_int_addr[pin].addr,
+ (0x20000 | hd->bit | (nasid << 8)));
+ bridge_set(bc, b_int_enable, (1 << pin));
+ bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
+
+ /*
+ * Enable sending of an interrupt clear packt to the hub on a high to
+ * low transition of the interrupt pin.
+ *
+ * IRIX sets additional bits in the address which are documented as
+ * reserved in the bridge docs.
+ */
+ bridge_set(bc, b_int_mode, (1UL << pin));
+
+ /*
+ * We assume the bridge to have a 1:1 mapping between devices
+ * (slots) and intr pins.
+ */
+ device = bridge_read(bc, b_int_device);
+ device &= ~(7 << (pin*3));
+ device |= (pin << (pin*3));
+ bridge_write(bc, b_int_device, device);
+
+ bridge_read(bc, b_wid_tflush);
+
+ enable_hub_irq(d);
+
+ return 0; /* Never anything pending. */
+}
+
+static void shutdown_bridge_irq(struct irq_data *d)
+{
+ struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
+ struct bridge_controller *bc;
+ int pin = hd->pin;
+
+ if (!hd)
+ return;
+
+ disable_hub_irq(d);
+
+ bc = hd->bc;
+ bridge_clr(bc, b_int_enable, (1 << pin));
+ bridge_read(bc, b_wid_tflush);
+}
+
+static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask)
+{
+ nasid_t nasid;
+ int cpu;
+
+ cpu = cpumask_first_and(mask, cpu_online_mask);
+ nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+ hd->cpu = cpu;
+ if (!cputoslice(cpu)) {
+ hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_A);
+ hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_A);
+ } else {
+ hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_B);
+ hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_B);
+ }
+
+ /* Make sure it's not already pending when we connect it. */
+ REMOTE_HUB_CLR_INTR(nasid, hd->bit);
+}
+
+static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
+ bool force)
+{
+ struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
+
+ if (!hd)
+ return -EINVAL;
+
+ if (irqd_is_started(d))
+ disable_hub_irq(d);
+
+ setup_hub_mask(hd, mask);
+
+ if (irqd_is_started(d))
+ startup_bridge_irq(d);
+
+ irq_data_update_effective_affinity(d, cpumask_of(hd->cpu));
+
+ return 0;
+}
+
+static struct irq_chip hub_irq_type = {
+ .name = "HUB",
+ .irq_startup = startup_bridge_irq,
+ .irq_shutdown = shutdown_bridge_irq,
+ .irq_mask = disable_hub_irq,
+ .irq_unmask = enable_hub_irq,
+ .irq_set_affinity = set_affinity_hub_irq,
+};
+
+int request_bridge_irq(struct bridge_controller *bc, int pin)
{
- int b = 0, s;
+ struct hub_irq_data *hd;
+ struct hub_data *hub;
+ struct irq_desc *desc;
+ int swlevel;
+ int irq;
+
+ hd = kzalloc(sizeof(*hd), GFP_KERNEL);
+ if (!hd)
+ return -ENOMEM;
+
+ swlevel = alloc_level();
+ if (unlikely(swlevel < 0)) {
+ kfree(hd);
+ return -EAGAIN;
+ }
+ irq = swlevel + IP27_HUB_IRQ_BASE;
+
+ hd->bc = bc;
+ hd->bit = swlevel;
+ hd->pin = pin;
+ irq_set_chip_data(irq, hd);
+
+ /* use CPU connected to nearest hub */
+ hub = hub_data(NASID_TO_COMPACT_NODEID(bc->nasid));
+ setup_hub_mask(hd, &hub->h_cpus);
- s = 16; if (x >> 16 == 0) s = 0; b += s; x >>= s;
- s = 8; if (x >> 8 == 0) s = 0; b += s; x >>= s;
- s = 4; if (x >> 4 == 0) s = 0; b += s; x >>= s;
- s = 2; if (x >> 2 == 0) s = 0; b += s; x >>= s;
- s = 1; if (x >> 1 == 0) s = 0; b += s;
+ desc = irq_to_desc(irq);
+ desc->irq_common_data.node = bc->nasid;
+ cpumask_copy(desc->irq_common_data.affinity, &hub->h_cpus);
- return b;
+ return irq;
+}
+
+void ip27_hub_irq_init(void)
+{
+ int i;
+
+ for (i = IP27_HUB_IRQ_BASE;
+ i < (IP27_HUB_IRQ_BASE + IP27_HUB_IRQ_COUNT); i++)
+ irq_set_chip_and_handler(i, &hub_irq_type, handle_level_irq);
+
+ /*
+ * Some interrupts are reserved by hardware or by software convention.
+ * Mark these as reserved right away so they won't be used accidentally
+ * later.
+ */
+ for (i = 0; i <= BASE_PCI_IRQ; i++)
+ set_bit(i, hub_irq_map);
+
+ set_bit(IP_PEND0_6_63, hub_irq_map);
+
+ for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
+ set_bit(i, hub_irq_map);
}
/*
@@ -82,23 +249,19 @@ static int ms1bit(unsigned long x)
* Kanoj 05.13.00
*/
-static void ip27_do_irq_mask0(void)
+static void ip27_do_irq_mask0(struct irq_desc *desc)
{
- int irq, swlevel;
- u64 pend0, mask0;
cpuid_t cpu = smp_processor_id();
- int pi_int_mask0 =
- (cputoslice(cpu) == 0) ? PI_INT_MASK0_A : PI_INT_MASK0_B;
+ unsigned long *mask = per_cpu(irq_enable_mask, cpu);
+ u64 pend0;
/* copied from Irix intpend0() */
pend0 = LOCAL_HUB_L(PI_INT_PEND0);
- mask0 = LOCAL_HUB_L(pi_int_mask0);
- pend0 &= mask0; /* Pick intrs we should look at */
+ pend0 &= mask[0]; /* Pick intrs we should look at */
if (!pend0)
return;
- swlevel = ms1bit(pend0);
#ifdef CONFIG_SMP
if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
@@ -108,106 +271,66 @@ static void ip27_do_irq_mask0(void)
scheduler_ipi();
} else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
- irq_enter();
generic_smp_call_function_interrupt();
- irq_exit();
} else if (pend0 & (1UL << CPU_CALL_B_IRQ)) {
LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
- irq_enter();
generic_smp_call_function_interrupt();
- irq_exit();
} else
#endif
- {
- /* "map" swlevel to irq */
- struct slice_data *si = cpu_data[cpu].data;
-
- irq = si->level_to_irq[swlevel];
- do_IRQ(irq);
- }
+ generic_handle_irq(__ffs(pend0) + IP27_HUB_IRQ_BASE);
LOCAL_HUB_L(PI_INT_PEND0);
}
-static void ip27_do_irq_mask1(void)
+static void ip27_do_irq_mask1(struct irq_desc *desc)
{
- int irq, swlevel;
- u64 pend1, mask1;
cpuid_t cpu = smp_processor_id();
- int pi_int_mask1 = (cputoslice(cpu) == 0) ? PI_INT_MASK1_A : PI_INT_MASK1_B;
- struct slice_data *si = cpu_data[cpu].data;
+ unsigned long *mask = per_cpu(irq_enable_mask, cpu);
+ u64 pend1;
/* copied from Irix intpend0() */
pend1 = LOCAL_HUB_L(PI_INT_PEND1);
- mask1 = LOCAL_HUB_L(pi_int_mask1);
- pend1 &= mask1; /* Pick intrs we should look at */
+ pend1 &= mask[1]; /* Pick intrs we should look at */
if (!pend1)
return;
- swlevel = ms1bit(pend1);
- /* "map" swlevel to irq */
- irq = si->level_to_irq[swlevel];
- LOCAL_HUB_CLR_INTR(swlevel);
- do_IRQ(irq);
+ generic_handle_irq(__ffs(pend1) + IP27_HUB_IRQ_BASE + 64);
LOCAL_HUB_L(PI_INT_PEND1);
}
-static void ip27_prof_timer(void)
-{
- panic("CPU %d got a profiling interrupt", smp_processor_id());
-}
-
-static void ip27_hub_error(void)
-{
- panic("CPU %d got a hub error interrupt", smp_processor_id());
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending = read_c0_cause() & read_c0_status();
- extern unsigned int rt_timer_irq;
-
- if (pending & CAUSEF_IP4)
- do_IRQ(rt_timer_irq);
- else if (pending & CAUSEF_IP2) /* PI_INT_PEND_0 or CC_PEND_{A|B} */
- ip27_do_irq_mask0();
- else if (pending & CAUSEF_IP3) /* PI_INT_PEND_1 */
- ip27_do_irq_mask1();
- else if (pending & CAUSEF_IP5)
- ip27_prof_timer();
- else if (pending & CAUSEF_IP6)
- ip27_hub_error();
-}
-
-void __init arch_init_irq(void)
-{
-}
-
void install_ipi(void)
{
- int slice = LOCAL_HUB_L(PI_CPU_NUM);
int cpu = smp_processor_id();
- struct slice_data *si = cpu_data[cpu].data;
- struct hub_data *hub = hub_data(cpu_to_node(cpu));
+ unsigned long *mask = per_cpu(irq_enable_mask, cpu);
+ int slice = LOCAL_HUB_L(PI_CPU_NUM);
int resched, call;
resched = CPU_RESCHED_A_IRQ + slice;
- __set_bit(resched, hub->irq_alloc_mask);
- __set_bit(resched, si->irq_enable_mask);
+ set_bit(resched, mask);
LOCAL_HUB_CLR_INTR(resched);
call = CPU_CALL_A_IRQ + slice;
- __set_bit(call, hub->irq_alloc_mask);
- __set_bit(call, si->irq_enable_mask);
+ set_bit(call, mask);
LOCAL_HUB_CLR_INTR(call);
if (slice == 0) {
- LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]);
- LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]);
+ LOCAL_HUB_S(PI_INT_MASK0_A, mask[0]);
+ LOCAL_HUB_S(PI_INT_MASK1_A, mask[1]);
} else {
- LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]);
- LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]);
+ LOCAL_HUB_S(PI_INT_MASK0_B, mask[0]);
+ LOCAL_HUB_S(PI_INT_MASK1_B, mask[1]);
}
}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ip27_hub_irq_init();
+
+ irq_set_percpu_devid(IP27_HUB_PEND0_IRQ);
+ irq_set_chained_handler(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0);
+ irq_set_percpu_devid(IP27_HUB_PEND1_IRQ);
+ irq_set_chained_handler(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1);
+}
diff --git a/arch/mips/sgi-ip27/ip27-irqno.c b/arch/mips/sgi-ip27/ip27-irqno.c
deleted file mode 100644
index 957ab58e1c00..000000000000
--- a/arch/mips/sgi-ip27/ip27-irqno.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-
-#include <asm/barrier.h>
-
-static DECLARE_BITMAP(irq_map, NR_IRQS);
-
-int allocate_irqno(void)
-{
- int irq;
-
-again:
- irq = find_first_zero_bit(irq_map, NR_IRQS);
-
- if (irq >= NR_IRQS)
- return -ENOSPC;
-
- if (test_and_set_bit(irq, irq_map))
- goto again;
-
- return irq;
-}
-
-/*
- * Allocate the 16 legacy interrupts for i8259 devices. This happens early
- * in the kernel initialization so treating allocation failure as BUG() is
- * ok.
- */
-void __init alloc_legacy_irqno(void)
-{
- int i;
-
- for (i = 0; i <= 16; i++)
- BUG_ON(test_and_set_bit(i, irq_map));
-}
-
-void free_irqno(unsigned int irq)
-{
- smp_mb__before_atomic();
- clear_bit(irq, irq_map);
- smp_mb__after_atomic();
-}
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 9d55247533a5..9b4b9ac621a3 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -38,20 +38,6 @@
#include <asm/sn/sn0/hubio.h>
#include <asm/pci/bridge.h>
-static void enable_rt_irq(struct irq_data *d)
-{
-}
-
-static void disable_rt_irq(struct irq_data *d)
-{
-}
-
-static struct irq_chip rt_irq_type = {
- .name = "SN HUB RT timer",
- .irq_mask = disable_rt_irq,
- .irq_unmask = enable_rt_irq,
-};
-
static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
@@ -65,8 +51,6 @@ static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
return LOCAL_HUB_L(PI_RT_COUNT) >= cnt ? -ETIME : 0;
}
-unsigned int rt_timer_irq;
-
static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
static DEFINE_PER_CPU(char [11], hub_rt_name);
@@ -87,6 +71,7 @@ static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
struct irqaction hub_rt_irqaction = {
.handler = hub_rt_counter_handler,
+ .percpu_dev_id = &hub_rt_clockevent,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "hub-rt",
};
@@ -107,7 +92,6 @@ void hub_rt_clock_event_init(void)
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
unsigned char *name = per_cpu(hub_rt_name, cpu);
- int irq = rt_timer_irq;
sprintf(name, "hub-rt %d", cpu);
cd->name = name;
@@ -118,29 +102,19 @@ void hub_rt_clock_event_init(void)
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
cd->min_delta_ticks = 0x300;
cd->rating = 200;
- cd->irq = irq;
+ cd->irq = IP27_RT_TIMER_IRQ;
cd->cpumask = cpumask_of(cpu);
cd->set_next_event = rt_next_event;
clockevents_register_device(cd);
+
+ enable_percpu_irq(IP27_RT_TIMER_IRQ, IRQ_TYPE_NONE);
}
static void __init hub_rt_clock_event_global_init(void)
{
- int irq;
-
- do {
- smp_wmb();
- irq = rt_timer_irq;
- if (irq)
- break;
-
- irq = allocate_irqno();
- if (irq < 0)
- panic("Allocation of irq number for timer failed");
- } while (xchg(&rt_timer_irq, irq));
-
- irq_set_chip_and_handler(irq, &rt_irq_type, handle_percpu_irq);
- setup_irq(irq, &hub_rt_irqaction);
+ irq_set_handler(IP27_RT_TIMER_IRQ, handle_percpu_devid_irq);
+ irq_set_percpu_devid(IP27_RT_TIMER_IRQ);
+ setup_percpu_irq(IP27_RT_TIMER_IRQ, &hub_rt_irqaction);
}
static u64 hub_rt_read(struct clocksource *cs)
@@ -194,8 +168,6 @@ void cpu_time_init(void)
panic("No information about myself?");
printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
-
- set_c0_status(SRB_TIMOCLK);
}
void hub_rtc_init(cnodeid_t cnode)