summaryrefslogtreecommitdiff
path: root/arch/mips/sibyte
diff options
context:
space:
mode:
authorJason Wessel <jason.wessel@windriver.com>2008-07-30 00:58:52 +0400
committerRalf Baechle <ralf@linux-mips.org>2008-07-31 00:54:42 +0400
commit8d60a903d986ffa26c41f0092320a3b9da20bfaf (patch)
treef05a8ae48e275d55fcfd3acfb7b3b1b601da56ea /arch/mips/sibyte
parent8f8da9adebdf04bfb3b812a7de8706fbf179fd2c (diff)
downloadlinux-8d60a903d986ffa26c41f0092320a3b9da20bfaf.tar.xz
[MIPS] kgdb: Remove existing implementation
This patch explicitly removes the kgdb implementation, for mips which is intended to be followed by a patch that adds a kgdb implementation for MIPS that makes use of the kgdb core in the kernel. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/sibyte')
-rw-r--r--arch/mips/sibyte/bcm1480/irq.c80
-rw-r--r--arch/mips/sibyte/cfe/setup.c14
-rw-r--r--arch/mips/sibyte/sb1250/irq.c60
-rw-r--r--arch/mips/sibyte/swarm/Makefile1
-rw-r--r--arch/mips/sibyte/swarm/dbg_io.c76
5 files changed, 0 insertions, 231 deletions
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0f106d..a35818ed4263 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
extern unsigned long ht_eoi_space;
#endif
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
- kgdb_flag = 0;
- return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
static struct irq_chip bcm1480_irq_type = {
.name = "BCM1480-IMR",
.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
* does its own management of IP7.
*/
-#ifdef CONFIG_KGDB
- imask |= STATUSF_IP6;
-#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
- sb1250_duart_present[kgdb_port] = 0;
-#endif
- /* Setup uart 1 settings, mapper */
- /* QQQ FIXME */
- __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
- __raw_writeq(IMR_IP6_VAL,
- IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
- (kgdb_irq << 3)));
- bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
- register_gdb_console();
-#endif
- printk("Waiting for GDB on UART port %d\n", kgdb_port);
- set_debug_traps();
- breakpoint();
- }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
- /*
- * Clear break-change status (allow some time for the remote
- * host to stop the break, since we would see another
- * interrupt on the end-of-break too)
- */
- kstat.irqs[smp_processor_id()][kgdb_irq]++;
- mdelay(500);
- duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
- M_DUART_RX_EN | M_DUART_TX_EN);
- set_async_breakpoint(&get_irq_regs()->cp0_epc);
}
-#endif /* CONFIG_KGDB */
-
extern void bcm1480_mailbox_interrupt(void);
static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
bcm1480_mailbox_interrupt();
#endif
-#ifdef CONFIG_KGDB
- else if (pending & CAUSEF_IP6)
- bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */
-#endif
-
else if (pending & CAUSEF_IP2)
dispatch_ip2();
}
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index fd9604d5555a..3de30f79db3f 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@ int cfe_cons_handle;
extern unsigned long initrd_start, initrd_end;
#endif
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
static void __noreturn cfe_linux_exit(void *arg)
{
int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
int argc = fw_arg0;
char **envp = (char **) fw_arg2;
int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
- char *arg;
-#endif
_machine_restart = cfe_linux_restart;
_machine_halt = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
}
}
-#ifdef CONFIG_KGDB
- if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
- kgdb_port = (arg[10] == '0') ? 0 : 1;
- else
- kgdb_port = 1;
-#endif
-
#ifdef CONFIG_BLK_DEV_INITRD
{
char *ptr;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065ffe0c..a5158483986e 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
extern unsigned long ldt_eoi_space;
#endif
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
static struct irq_chip sb1250_irq_type = {
.name = "SB1250-IMR",
.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
* does its own management of IP7.
*/
-#ifdef CONFIG_KGDB
- imask |= STATUSF_IP6;
-#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
- sb1250_duart_present[kgdb_port] = 0;
-#endif
- /* Setup uart 1 settings, mapper */
- __raw_writeq(M_DUART_IMR_BRK,
- IOADDR(A_DUART_IMRREG(kgdb_port)));
-
- __raw_writeq(IMR_IP6_VAL,
- IOADDR(A_IMR_REGISTER(0,
- R_IMR_INTERRUPT_MAP_BASE) +
- (kgdb_irq << 3)));
- sb1250_unmask_irq(0, kgdb_irq);
- }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
- /*
- * Clear break-change status (allow some time for the remote
- * host to stop the break, since we would see another
- * interrupt on the end-of-break too)
- */
- kstat_this_cpu.irqs[kgdb_irq]++;
- mdelay(500);
- duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
- M_DUART_RX_EN | M_DUART_TX_EN);
- set_async_breakpoint(&get_irq_regs()->cp0_epc);
}
-#endif /* CONFIG_KGDB */
-
extern void sb1250_mailbox_interrupt(void);
static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
sb1250_mailbox_interrupt();
#endif
-#ifdef CONFIG_KGDB
- else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */
- sb1250_kgdb_interrupt();
-#endif
-
else if (pending & CAUSEF_IP2)
dispatch_ip2();
else
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692bfa18..f18ba9201bbc 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o
-obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae3048482..000000000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 115200, 8, N, 1.
- */
-
-#define BAUD_RATE 115200
-#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE)
-#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */
-#define PARITY V_DUART_PARITY_MODE_NONE /* or even */
-#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */
-
-static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
- duart_out(R_DUART_MODE_REG_1, data | parity);
- duart_out(R_DUART_MODE_REG_2, stop);
- duart_out(R_DUART_CLK_SEL, clk_divisor);
-
- duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
- if (!duart_initialized) {
- duart_initialized = 1;
- duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
- }
- while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
- duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
- if (!duart_initialized) {
- duart_initialized = 1;
- duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
- }
- while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
- return duart_in(R_DUART_RX_HOLD);
-}
-