diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-06-29 06:35:21 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-06-29 06:35:21 +0300 |
commit | 9471f1f2f50282b9e8f59198ec6bb738b4ccc009 (patch) | |
tree | 3eb773fe01321d315cf96832dbf8d8d71d929a25 /arch/parisc/mm | |
parent | 3a8a670eeeaa40d87bd38a587438952741980c18 (diff) | |
parent | a425ac5365f6cb3cc47bf83e6bff0213c10445f7 (diff) | |
download | linux-9471f1f2f50282b9e8f59198ec6bb738b4ccc009.tar.xz |
Merge branch 'expand-stack'
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
Diffstat (limited to 'arch/parisc/mm')
-rw-r--r-- | arch/parisc/mm/fault.c | 23 |
1 files changed, 11 insertions, 12 deletions
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 6941fdbf2517..6e894afa4249 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -288,15 +288,19 @@ void do_page_fault(struct pt_regs *regs, unsigned long code, retry: mmap_read_lock(mm); vma = find_vma_prev(mm, address, &prev_vma); - if (!vma || address < vma->vm_start) - goto check_expansion; + if (!vma || address < vma->vm_start) { + if (!prev || !(prev->vm_flags & VM_GROWSUP)) + goto bad_area; + vma = expand_stack(mm, address); + if (!vma) + goto bad_area_nosemaphore; + } + /* * Ok, we have a good vm_area for this memory access. We still need to * check the access permissions. */ -good_area: - if ((vma->vm_flags & acc_type) != acc_type) goto bad_area; @@ -347,17 +351,13 @@ good_area: mmap_read_unlock(mm); return; -check_expansion: - vma = prev_vma; - if (vma && (expand_stack(vma, address) == 0)) - goto good_area; - /* * Something tried to access memory that isn't in our memory map.. */ bad_area: mmap_read_unlock(mm); +bad_area_nosemaphore: if (user_mode(regs)) { int signo, si_code; @@ -449,7 +449,7 @@ handle_nadtlb_fault(struct pt_regs *regs) { unsigned long insn = regs->iir; int breg, treg, xreg, val = 0; - struct vm_area_struct *vma, *prev_vma; + struct vm_area_struct *vma; struct task_struct *tsk; struct mm_struct *mm; unsigned long address; @@ -485,7 +485,7 @@ handle_nadtlb_fault(struct pt_regs *regs) /* Search for VMA */ address = regs->ior; mmap_read_lock(mm); - vma = find_vma_prev(mm, address, &prev_vma); + vma = vma_lookup(mm, address); mmap_read_unlock(mm); /* @@ -494,7 +494,6 @@ handle_nadtlb_fault(struct pt_regs *regs) */ acc_type = (insn & 0x40) ? VM_WRITE : VM_READ; if (vma - && address >= vma->vm_start && (vma->vm_flags & acc_type) == acc_type) val = 1; } |