Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Support for userspace to send requests directly to the on-chip GZIP
   accelerator on Power9.

 - Rework of our lockless page table walking (__find_linux_pte()) to
   make it safe against parallel page table manipulations without
   relying on an IPI for serialisation.

 - A series of fixes & enhancements to make our machine check handling
   more robust.

 - Lots of plumbing to add support for "prefixed" (64-bit) instructions
   on Power10.

 - Support for using huge pages for the linear mapping on 8xx (32-bit).

 - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
   driver.

 - Removal of some obsolete 40x platforms and associated cruft.

 - Initial support for booting on Power10.

 - Lots of other small features, cleanups & fixes.

Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.

* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
  powerpc/pseries: Make vio and ibmebus initcalls pseries specific
  cxl: Remove dead Kconfig options
  powerpc: Add POWER10 architected mode
  powerpc/dt_cpu_ftrs: Add MMA feature
  powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
  powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
  powerpc: Add support for ISA v3.1
  powerpc: Add new HWCAP bits
  powerpc/64s: Don't set FSCR bits in INIT_THREAD
  powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
  powerpc/64s: Don't let DT CPU features set FSCR_DSCR
  powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
  powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
  powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
  powerpc/module_64: Consolidate ftrace code
  powerpc/32: Disable KASAN with pages bigger than 16k
  powerpc/uaccess: Don't set KUEP by default on book3s/32
  powerpc/uaccess: Don't set KUAP by default on book3s/32
  powerpc/8xx: Reduce time spent in allow_user_access() and friends
  ...

1 files changed, 14 insertions, 5 deletions

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index da5cab038e25..88e6c78100d9 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -283,14 +283,16 @@
 #define   CTRL_CT1	0x40000000	/* thread 1 */
 #define   CTRL_TE	0x00c00000	/* thread enable */
 #define   CTRL_RUNLATCH	0x1
-#define SPRN_DAWR	0xB4
+#define SPRN_DAWR0	0xB4
+#define SPRN_DAWR1	0xB5
 #define SPRN_RPR	0xBA	/* Relative Priority Register */
 #define SPRN_CIABR	0xBB
 #define   CIABR_PRIV		0x3
 #define   CIABR_PRIV_USER	1
 #define   CIABR_PRIV_SUPER	2
 #define   CIABR_PRIV_HYPER	3
-#define SPRN_DAWRX	0xBC
+#define SPRN_DAWRX0	0xBC
+#define SPRN_DAWRX1	0xBD
 #define   DAWRX_USER	__MASK(0)
 #define   DAWRX_KERNEL	__MASK(1)
 #define   DAWRX_HYP	__MASK(2)
@@ -397,6 +399,7 @@
 #define SPRN_RWMR	0x375	/* Region-Weighting Mode Register */
 
 /* HFSCR and FSCR bit numbers are the same */
+#define FSCR_PREFIX_LG	13	/* Enable Prefix Instructions */
 #define FSCR_SCV_LG	12	/* Enable System Call Vectored */
 #define FSCR_MSGP_LG	10	/* Enable MSGP */
 #define FSCR_TAR_LG	8	/* Enable Target Address Register */
@@ -408,11 +411,13 @@
 #define FSCR_VECVSX_LG	1	/* Enable VMX/VSX  */
 #define FSCR_FP_LG	0	/* Enable Floating Point */
 #define SPRN_FSCR	0x099	/* Facility Status & Control Register */
+#define   FSCR_PREFIX	__MASK(FSCR_PREFIX_LG)
 #define   FSCR_SCV	__MASK(FSCR_SCV_LG)
 #define   FSCR_TAR	__MASK(FSCR_TAR_LG)
 #define   FSCR_EBB	__MASK(FSCR_EBB_LG)
 #define   FSCR_DSCR	__MASK(FSCR_DSCR_LG)
 #define SPRN_HFSCR	0xbe	/* HV=1 Facility Status & Control Register */
+#define   HFSCR_PREFIX	__MASK(FSCR_PREFIX_LG)
 #define   HFSCR_MSGP	__MASK(FSCR_MSGP_LG)
 #define   HFSCR_TAR	__MASK(FSCR_TAR_LG)
 #define   HFSCR_EBB	__MASK(FSCR_EBB_LG)
@@ -476,16 +481,18 @@
 #define   PCR_VEC_DIS	(__MASK(63-0))	/* Vec. disable (bit NA since POWER8) */
 #define   PCR_VSX_DIS	(__MASK(63-1))	/* VSX disable (bit NA since POWER8) */
 #define   PCR_TM_DIS	(__MASK(63-2))	/* Trans. memory disable (POWER8) */
-#define   PCR_HIGH_BITS	(PCR_VEC_DIS | PCR_VSX_DIS | PCR_TM_DIS)
+#define   PCR_MMA_DIS	(__MASK(63-3)) /* Matrix-Multiply Accelerator */
+#define   PCR_HIGH_BITS	(PCR_MMA_DIS | PCR_VEC_DIS | PCR_VSX_DIS | PCR_TM_DIS)
 /*
  * These bits are used in the function kvmppc_set_arch_compat() to specify and
  * determine both the compatibility level which we want to emulate and the
  * compatibility level which the host is capable of emulating.
  */
+#define   PCR_ARCH_300	0x10		/* Architecture 3.00 */
 #define   PCR_ARCH_207	0x8		/* Architecture 2.07 */
 #define   PCR_ARCH_206	0x4		/* Architecture 2.06 */
 #define   PCR_ARCH_205	0x2		/* Architecture 2.05 */
-#define   PCR_LOW_BITS	(PCR_ARCH_207 | PCR_ARCH_206 | PCR_ARCH_205)
+#define   PCR_LOW_BITS	(PCR_ARCH_207 | PCR_ARCH_206 | PCR_ARCH_205 | PCR_ARCH_300)
 #define   PCR_MASK	~(PCR_HIGH_BITS | PCR_LOW_BITS)	/* PCR Reserved Bits */
 #define	SPRN_HEIR	0x153	/* Hypervisor Emulated Instruction Register */
 #define SPRN_TLBINDEXR	0x154	/* P7 TLB control register */
@@ -759,7 +766,7 @@
 #endif
 
 #define   SRR1_ISI_NOPT		0x40000000 /* ISI: Not found in hash */
-#define   SRR1_ISI_N_OR_G	0x10000000 /* ISI: Access is no-exec or G */
+#define   SRR1_ISI_N_G_OR_CIP	0x10000000 /* ISI: Access is no-exec or G or CI for a prefixed instruction */
 #define   SRR1_ISI_PROT		0x08000000 /* ISI: Other protection fault */
 #define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
 #define   SRR1_WAKEMASK_P8	0x003c0000 /* reason for wakeup on POWER8 and 9 */
@@ -786,6 +793,8 @@
 #define   SRR1_PROGADDR		0x00010000 /* SRR0 contains subsequent addr */
 
 #define   SRR1_MCE_MCP		0x00080000 /* Machine check signal caused interrupt */
+#define   SRR1_BOUNDARY		0x10000000 /* Prefixed instruction crosses 64-byte boundary */
+#define   SRR1_PREFIXED		0x20000000 /* Exception caused by prefixed instruction */
 
 #define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
 #define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */