summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx/Kconfig
diff options
context:
space:
mode:
authorMingkai Hu <Mingkai.hu@freescale.com>2011-06-28 11:52:34 +0400
committerKumar Gala <galak@kernel.crashing.org>2011-07-08 09:21:32 +0400
commit3fce1c0ba2b35b68135d8d8a3438f8c8272a01d8 (patch)
tree5218391b3566c3eb842a67807a2d8b442999f70b /arch/powerpc/platforms/85xx/Kconfig
parent59f8df290acb6d279a690733a67b3902766999f3 (diff)
downloadlinux-3fce1c0ba2b35b68135d8d8a3438f8c8272a01d8.tar.xz
powerpc/85xx: Add p2040 RDB board support
P2040RDB Specification: ----------------------- 2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus) 128 Mbyte NOR flash single-chip memory 256 Kbit M24256 I2C EEPROM 16 Mbyte SPI memory SD connector to interface with the SD memory card dTSEC1: connected to the Vitesse SGMII PHY (VSC8221) dTSEC2: connected to the Vitesse SGMII PHY (VSC8221) dTSEC3: connected to the Vitesse SGMII PHY (VSC8221) dTSEC4: connected to the Vitesse RGMII PHY (VSC8641) dTSEC5: connected to the Vitesse RGMII PHY (VSC8641) I2C1: Real time clock, Temperature sensor I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors UART: supports two UARTs up to 115200 bps for console USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces PCIe: - Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1 - Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/platforms/85xx/Kconfig')
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig12
1 files changed, 12 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 4706c71c9435..498534cd5265 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -171,6 +171,18 @@ config SBC8560
help
This option enables support for the Wind River SBC8560 board
+config P2040_RDB
+ bool "Freescale P2040 RDB"
+ select DEFAULT_UIMAGE
+ select PPC_E500MC
+ select PHYS_64BIT
+ select SWIOTLB
+ select MPC8xxx_GPIO
+ select HAS_RAPIDIO
+ select PPC_EPAPR_HV_PIC
+ help
+ This option enables support for the P2040 RDB board
+
config P3041_DS
bool "Freescale P3041 DS"
select DEFAULT_UIMAGE