arch: remove unicore32 port

The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.

Guenter Roeck says:

  I have stopped building unicore32 images since v4.19 since there is no
  available compiler that is still supported by the kernel. I am surprised
  that support for it has not been removed from the kernel.

Remove unicore32 port.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 513 deletions

diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
deleted file mode 100644
index 183d5b056814..000000000000
--- a/arch/unicore32/mm/mmu.c
+++ /dev/null
@@ -1,513 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/mmu.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/nodemask.h>
-#include <linux/memblock.h>
-#include <linux/fs.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <linux/sizes.h>
-#include <asm/tlb.h>
-#include <asm/memblock.h>
-
-#include <mach/map.h>
-
-#include "mm.h"
-
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-EXPORT_SYMBOL(empty_zero_page);
-
-/*
- * The pmd table for the upper-most set of pages.
- */
-pmd_t *top_pmd;
-
-pgprot_t pgprot_user;
-EXPORT_SYMBOL(pgprot_user);
-
-pgprot_t pgprot_kernel;
-EXPORT_SYMBOL(pgprot_kernel);
-
-static int __init noalign_setup(char *__unused)
-{
-	cr_alignment &= ~CR_A;
-	cr_no_alignment &= ~CR_A;
-	set_cr(cr_alignment);
-	return 1;
-}
-__setup("noalign", noalign_setup);
-
-void adjust_cr(unsigned long mask, unsigned long set)
-{
-	unsigned long flags;
-
-	mask &= ~CR_A;
-
-	set &= mask;
-
-	local_irq_save(flags);
-
-	cr_no_alignment = (cr_no_alignment & ~mask) | set;
-	cr_alignment = (cr_alignment & ~mask) | set;
-
-	set_cr((get_cr() & ~mask) | set);
-
-	local_irq_restore(flags);
-}
-
-struct map_desc {
-	unsigned long virtual;
-	unsigned long pfn;
-	unsigned long length;
-	unsigned int type;
-};
-
-#define PROT_PTE_DEVICE		(PTE_PRESENT | PTE_YOUNG |	\
-				PTE_DIRTY | PTE_READ | PTE_WRITE)
-#define PROT_SECT_DEVICE	(PMD_TYPE_SECT | PMD_PRESENT |	\
-				PMD_SECT_READ | PMD_SECT_WRITE)
-
-static struct mem_type mem_types[] = {
-	[MT_DEVICE] = {		  /* Strongly ordered */
-		.prot_pte	= PROT_PTE_DEVICE,
-		.prot_l1	= PMD_TYPE_TABLE | PMD_PRESENT,
-		.prot_sect	= PROT_SECT_DEVICE,
-	},
-	/*
-	 * MT_KUSER: pte for vecpage -- cacheable,
-	 *       and sect for unigfx mmap -- noncacheable
-	 */
-	[MT_KUSER] = {
-		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
-				PTE_CACHEABLE | PTE_READ | PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
-		.prot_sect = PROT_SECT_DEVICE,
-	},
-	[MT_HIGH_VECTORS] = {
-		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
-				PTE_CACHEABLE | PTE_READ | PTE_WRITE |
-				PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
-	},
-	[MT_MEMORY] = {
-		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
-				PTE_WRITE | PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
-		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
-				PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC,
-	},
-	[MT_ROM] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
-				PMD_SECT_READ,
-	},
-};
-
-const struct mem_type *get_mem_type(unsigned int type)
-{
-	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
-}
-EXPORT_SYMBOL(get_mem_type);
-
-/*
- * Adjust the PMD section entries according to the CPU in use.
- */
-static void __init build_mem_type_table(void)
-{
-	pgprot_user   = __pgprot(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE);
-	pgprot_kernel = __pgprot(PTE_PRESENT | PTE_YOUNG |
-				 PTE_DIRTY | PTE_READ | PTE_WRITE |
-				 PTE_EXEC | PTE_CACHEABLE);
-}
-
-#define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
-
-static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
-		unsigned long prot)
-{
-	if (pmd_none(*pmd)) {
-		size_t size = PTRS_PER_PTE * sizeof(pte_t);
-		pte_t *pte = memblock_alloc(size, size);
-
-		if (!pte)
-			panic("%s: Failed to allocate %zu bytes align=%zx\n",
-			      __func__, size, size);
-
-		__pmd_populate(pmd, __pa(pte) | prot);
-	}
-	BUG_ON(pmd_bad(*pmd));
-	return pte_offset_kernel(pmd, addr);
-}
-
-static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
-				  unsigned long end, unsigned long pfn,
-				  const struct mem_type *type)
-{
-	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
-	do {
-		set_pte(pte, pfn_pte(pfn, __pgprot(type->prot_pte)));
-		pfn++;
-	} while (pte++, addr += PAGE_SIZE, addr != end);
-}
-
-static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
-				      unsigned long end, unsigned long phys,
-				      const struct mem_type *type)
-{
-	pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
-
-	/*
-	 * Try a section mapping - end, addr and phys must all be aligned
-	 * to a section boundary.
-	 */
-	if (((addr | end | phys) & ~SECTION_MASK) == 0) {
-		pmd_t *p = pmd;
-
-		do {
-			set_pmd(pmd, __pmd(phys | type->prot_sect));
-			phys += SECTION_SIZE;
-		} while (pmd++, addr += SECTION_SIZE, addr != end);
-
-		flush_pmd_entry(p);
-	} else {
-		/*
-		 * No need to loop; pte's aren't interested in the
-		 * individual L1 entries.
-		 */
-		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
-	}
-}
-
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'.  We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections.
- */
-static void __init create_mapping(struct map_desc *md)
-{
-	unsigned long phys, addr, length, end;
-	const struct mem_type *type;
-	pgd_t *pgd;
-
-	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
-		printk(KERN_WARNING "BUG: not creating mapping for "
-		       "0x%08llx at 0x%08lx in user region\n",
-		       __pfn_to_phys((u64)md->pfn), md->virtual);
-		return;
-	}
-
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
-		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
-		       "overlaps vmalloc space\n",
-		       __pfn_to_phys((u64)md->pfn), md->virtual);
-	}
-
-	type = &mem_types[md->type];
-
-	addr = md->virtual & PAGE_MASK;
-	phys = (unsigned long)__pfn_to_phys(md->pfn);
-	length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
-
-	if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
-		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
-		       "be mapped using pages, ignoring.\n",
-		       __pfn_to_phys(md->pfn), addr);
-		return;
-	}
-
-	pgd = pgd_offset_k(addr);
-	end = addr + length;
-	do {
-		unsigned long next = pgd_addr_end(addr, end);
-
-		alloc_init_section(pgd, addr, next, phys, type);
-
-		phys += next - addr;
-		addr = next;
-	} while (pgd++, addr != end);
-}
-
-static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
- */
-static int __init early_vmalloc(char *arg)
-{
-	unsigned long vmalloc_reserve = memparse(arg, NULL);
-
-	if (vmalloc_reserve < SZ_16M) {
-		vmalloc_reserve = SZ_16M;
-		printk(KERN_WARNING
-			"vmalloc area too small, limiting to %luMB\n",
-			vmalloc_reserve >> 20);
-	}
-
-	if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
-		vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
-		printk(KERN_WARNING
-			"vmalloc area is too big, limiting to %luMB\n",
-			vmalloc_reserve >> 20);
-	}
-
-	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
-	return 0;
-}
-early_param("vmalloc", early_vmalloc);
-
-static phys_addr_t lowmem_limit __initdata = SZ_1G;
-
-static void __init sanity_check_meminfo(void)
-{
-	int i, j;
-
-	lowmem_limit = __pa(vmalloc_min - 1) + 1;
-	memblock_set_current_limit(lowmem_limit);
-
-	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
-		struct membank *bank = &meminfo.bank[j];
-		*bank = meminfo.bank[i];
-		j++;
-	}
-	meminfo.nr_banks = j;
-}
-
-static inline void prepare_page_table(void)
-{
-	unsigned long addr;
-	phys_addr_t end;
-
-	/*
-	 * Clear out all the mappings below the kernel image.
-	 */
-	for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Find the end of the first block of lowmem.
-	 */
-	end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
-	if (end >= lowmem_limit)
-		end = lowmem_limit;
-
-	/*
-	 * Clear out all the kernel space mappings, except for the first
-	 * memory bank, up to the end of the vmalloc region.
-	 */
-	for (addr = __phys_to_virt(end);
-	     addr < VMALLOC_END; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-}
-
-/*
- * Reserve the special regions of memory
- */
-void __init uc32_mm_memblock_reserve(void)
-{
-	/*
-	 * Reserve the page tables.  These are already in use,
-	 * and can only be in node 0.
-	 */
-	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
-}
-
-/*
- * Set up device the mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function.  This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(void)
-{
-	struct map_desc map;
-	unsigned long addr;
-	void *vectors;
-
-	/*
-	 * Allocate the vector page early.
-	 */
-	vectors = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!vectors)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
-
-	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Create a mapping for the machine vectors at the high-vectors
-	 * location (0xffff0000).  If we aren't using high-vectors, also
-	 * create a mapping at the low-vectors virtual address.
-	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
-	map.virtual = VECTORS_BASE;
-	map.length = PAGE_SIZE;
-	map.type = MT_HIGH_VECTORS;
-	create_mapping(&map);
-
-	/*
-	 * Create a mapping for the kuser page at the special
-	 * location (0xbfff0000) to the same vectors location.
-	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
-	map.virtual = KUSER_VECPAGE_BASE;
-	map.length = PAGE_SIZE;
-	map.type = MT_KUSER;
-	create_mapping(&map);
-
-	/*
-	 * Finally flush the caches and tlb to ensure that we're in a
-	 * consistent state wrt the writebuffer.  This also ensures that
-	 * any write-allocated cache lines in the vector page are written
-	 * back.  After this point, we can start to touch devices again.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-}
-
-static void __init map_lowmem(void)
-{
-	struct memblock_region *reg;
-
-	/* Map all the lowmem memory banks. */
-	for_each_memblock(memory, reg) {
-		phys_addr_t start = reg->base;
-		phys_addr_t end = start + reg->size;
-		struct map_desc map;
-
-		if (end > lowmem_limit)
-			end = lowmem_limit;
-		if (start >= end)
-			break;
-
-		map.pfn = __phys_to_pfn(start);
-		map.virtual = __phys_to_virt(start);
-		map.length = end - start;
-		map.type = MT_MEMORY;
-
-		create_mapping(&map);
-	}
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(void)
-{
-	void *zero_page;
-
-	build_mem_type_table();
-	sanity_check_meminfo();
-	prepare_page_table();
-	map_lowmem();
-	devicemaps_init();
-
-	top_pmd = pmd_off_k(0xffff0000);
-
-	/* allocate the zero page. */
-	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
-
-	bootmem_init();
-
-	empty_zero_page = virt_to_page(zero_page);
-	__flush_dcache_page(NULL, empty_zero_page);
-}
-
-/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages.  This will then ensure that we have predictable
- * results when turning the mmu off
- */
-void setup_mm_for_reboot(void)
-{
-	unsigned long base_pmdval;
-	pgd_t *pgd;
-	int i;
-
-	/*
-	 * We need to access to user-mode page tables here. For kernel threads
-	 * we don't have any user-mode mappings so we use the context that we
-	 * "borrowed".
-	 */
-	pgd = current->active_mm->pgd;
-
-	base_pmdval = PMD_SECT_WRITE | PMD_SECT_READ | PMD_TYPE_SECT;
-
-	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
-		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
-		pmd_t *pmd;
-
-		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
-		set_pmd(pmd, __pmd(pmdval));
-		flush_pmd_entry(pmd);
-	}
-
-	local_flush_tlb_all();
-}
-
-/*
- * Take care of architecture specific things when placing a new PTE into
- * a page table, or changing an existing PTE.  Basically, there are two
- * things that we need to take care of:
- *
- *  1. If PG_dcache_clean is not set for the page, we need to ensure
- *     that any cache entries for the kernels virtual memory
- *     range are written back to the page.
- *  2. If we have multiple shared mappings of the same space in
- *     an object, we need to deal with the cache aliasing issues.
- *
- * Note that the pte lock will be held.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-	pte_t *ptep)
-{
-	unsigned long pfn = pte_pfn(*ptep);
-	struct address_space *mapping;
-	struct page *page;
-
-	if (!pfn_valid(pfn))
-		return;
-
-	/*
-	 * The zero page is never written to, so never has any dirty
-	 * cache lines, and therefore never needs to be flushed.
-	 */
-	page = pfn_to_page(pfn);
-	if (page == ZERO_PAGE(0))
-		return;
-
-	mapping = page_mapping_file(page);
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
-		__flush_dcache_page(mapping, page);
-	if (mapping)
-		if (vma->vm_flags & VM_EXEC)
-			__flush_icache_all();
-}