summaryrefslogtreecommitdiff
path: root/arch/x86/entry
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-03-15 19:32:27 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-03-15 19:32:27 +0300
commitba33ea811e1ff6726abb7f8f96df38c2d7b50304 (patch)
tree29134e5cc7c19c8e520cb9336b476144d3d1252f /arch/x86/entry
parente23604edac2a7be6a8808a5d13fac6b9df4eb9a8 (diff)
parentd05004944206cbbf1c453e179768163731c7c6f1 (diff)
downloadlinux-ba33ea811e1ff6726abb7f8f96df38c2d7b50304.tar.xz
Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar: "This is another big update. Main changes are: - lots of x86 system call (and other traps/exceptions) entry code enhancements. In particular the complex parts of the 64-bit entry code have been migrated to C code as well, and a number of dusty corners have been refreshed. (Andy Lutomirski) - vDSO special mapping robustification and general cleanups (Andy Lutomirski) - cpufeature refactoring, cleanups and speedups (Borislav Petkov) - lots of other changes ..." * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits) x86/cpufeature: Enable new AVX-512 features x86/entry/traps: Show unhandled signal for i386 in do_trap() x86/entry: Call enter_from_user_mode() with IRQs off x86/entry/32: Change INT80 to be an interrupt gate x86/entry: Improve system call entry comments x86/entry: Remove TIF_SINGLESTEP entry work x86/entry/32: Add and check a stack canary for the SYSENTER stack x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed x86/entry: Vastly simplify SYSENTER TF (single-step) handling x86/entry/traps: Clear DR6 early in do_debug() and improve the comment x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions x86/entry/32: Restore FLAGS on SYSEXIT x86/entry/32: Filter NT and speed up AC filtering in SYSENTER x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test selftests/x86: In syscall_nt, test NT|TF as well x86/asm-offsets: Remove PARAVIRT_enabled x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled uprobes: __create_xol_area() must nullify xol_mapping.fault x86/cpufeature: Create a new synthetic cpu capability for machine check recovery ...
Diffstat (limited to 'arch/x86/entry')
-rw-r--r--arch/x86/entry/calling.h31
-rw-r--r--arch/x86/entry/common.c106
-rw-r--r--arch/x86/entry/entry_32.S268
-rw-r--r--arch/x86/entry/entry_64.S286
-rw-r--r--arch/x86/entry/entry_64_compat.S102
-rw-r--r--arch/x86/entry/syscall_32.c10
-rw-r--r--arch/x86/entry/syscall_64.c13
-rw-r--r--arch/x86/entry/syscalls/syscall_64.tbl20
-rw-r--r--arch/x86/entry/syscalls/syscalltbl.sh58
-rw-r--r--arch/x86/entry/vdso/vdso2c.h7
-rw-r--r--arch/x86/entry/vdso/vdso32-setup.c1
-rw-r--r--arch/x86/entry/vdso/vdso32/system_call.S2
-rw-r--r--arch/x86/entry/vdso/vma.c127
-rw-r--r--arch/x86/entry/vsyscall/vsyscall_gtod.c9
14 files changed, 566 insertions, 474 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index e32206e09868..9a9e5884066c 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -201,37 +201,6 @@ For 32-bit we have the following conventions - kernel is built with
.byte 0xf1
.endm
-#else /* CONFIG_X86_64 */
-
-/*
- * For 32bit only simplified versions of SAVE_ALL/RESTORE_ALL. These
- * are different from the entry_32.S versions in not changing the segment
- * registers. So only suitable for in kernel use, not when transitioning
- * from or to user space. The resulting stack frame is not a standard
- * pt_regs frame. The main use case is calling C code from assembler
- * when all the registers need to be preserved.
- */
-
- .macro SAVE_ALL
- pushl %eax
- pushl %ebp
- pushl %edi
- pushl %esi
- pushl %edx
- pushl %ecx
- pushl %ebx
- .endm
-
- .macro RESTORE_ALL
- popl %ebx
- popl %ecx
- popl %edx
- popl %esi
- popl %edi
- popl %ebp
- popl %eax
- .endm
-
#endif /* CONFIG_X86_64 */
/*
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index 03663740c866..e79d93d44ecd 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -26,6 +26,7 @@
#include <asm/traps.h>
#include <asm/vdso.h>
#include <asm/uaccess.h>
+#include <asm/cpufeature.h>
#define CREATE_TRACE_POINTS
#include <trace/events/syscalls.h>
@@ -44,6 +45,8 @@ __visible void enter_from_user_mode(void)
CT_WARN_ON(ct_state() != CONTEXT_USER);
user_exit();
}
+#else
+static inline void enter_from_user_mode(void) {}
#endif
static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch)
@@ -84,17 +87,6 @@ unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch)
work = ACCESS_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY;
-#ifdef CONFIG_CONTEXT_TRACKING
- /*
- * If TIF_NOHZ is set, we are required to call user_exit() before
- * doing anything that could touch RCU.
- */
- if (work & _TIF_NOHZ) {
- enter_from_user_mode();
- work &= ~_TIF_NOHZ;
- }
-#endif
-
#ifdef CONFIG_SECCOMP
/*
* Do seccomp first -- it should minimize exposure of other
@@ -171,16 +163,6 @@ long syscall_trace_enter_phase2(struct pt_regs *regs, u32 arch,
if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
BUG_ON(regs != task_pt_regs(current));
- /*
- * If we stepped into a sysenter/syscall insn, it trapped in
- * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
- * If user-mode had set TF itself, then it's still clear from
- * do_debug() and we need to set it again to restore the user
- * state. If we entered on the slow path, TF was already set.
- */
- if (work & _TIF_SINGLESTEP)
- regs->flags |= X86_EFLAGS_TF;
-
#ifdef CONFIG_SECCOMP
/*
* Call seccomp_phase2 before running the other hooks so that
@@ -268,6 +250,7 @@ static void exit_to_usermode_loop(struct pt_regs *regs, u32 cached_flags)
/* Called with IRQs disabled. */
__visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
u32 cached_flags;
if (IS_ENABLED(CONFIG_PROVE_LOCKING) && WARN_ON(!irqs_disabled()))
@@ -275,12 +258,22 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
lockdep_sys_exit();
- cached_flags =
- READ_ONCE(pt_regs_to_thread_info(regs)->flags);
+ cached_flags = READ_ONCE(ti->flags);
if (unlikely(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
exit_to_usermode_loop(regs, cached_flags);
+#ifdef CONFIG_COMPAT
+ /*
+ * Compat syscalls set TS_COMPAT. Make sure we clear it before
+ * returning to user mode. We need to clear it *after* signal
+ * handling, because syscall restart has a fixup for compat
+ * syscalls. The fixup is exercised by the ptrace_syscall_32
+ * selftest.
+ */
+ ti->status &= ~TS_COMPAT;
+#endif
+
user_enter();
}
@@ -332,33 +325,45 @@ __visible inline void syscall_return_slowpath(struct pt_regs *regs)
if (unlikely(cached_flags & SYSCALL_EXIT_WORK_FLAGS))
syscall_slow_exit_work(regs, cached_flags);
-#ifdef CONFIG_COMPAT
+ local_irq_disable();
+ prepare_exit_to_usermode(regs);
+}
+
+#ifdef CONFIG_X86_64
+__visible void do_syscall_64(struct pt_regs *regs)
+{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
+ unsigned long nr = regs->orig_ax;
+
+ enter_from_user_mode();
+ local_irq_enable();
+
+ if (READ_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY)
+ nr = syscall_trace_enter(regs);
+
/*
- * Compat syscalls set TS_COMPAT. Make sure we clear it before
- * returning to user mode.
+ * NB: Native and x32 syscalls are dispatched from the same
+ * table. The only functional difference is the x32 bit in
+ * regs->orig_ax, which changes the behavior of some syscalls.
*/
- ti->status &= ~TS_COMPAT;
-#endif
+ if (likely((nr & __SYSCALL_MASK) < NR_syscalls)) {
+ regs->ax = sys_call_table[nr & __SYSCALL_MASK](
+ regs->di, regs->si, regs->dx,
+ regs->r10, regs->r8, regs->r9);
+ }
- local_irq_disable();
- prepare_exit_to_usermode(regs);
+ syscall_return_slowpath(regs);
}
+#endif
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
/*
- * Does a 32-bit syscall. Called with IRQs on and does all entry and
- * exit work and returns with IRQs off. This function is extremely hot
- * in workloads that use it, and it's usually called from
+ * Does a 32-bit syscall. Called with IRQs on in CONTEXT_KERNEL. Does
+ * all entry and exit work and returns with IRQs off. This function is
+ * extremely hot in workloads that use it, and it's usually called from
* do_fast_syscall_32, so forcibly inline it to improve performance.
*/
-#ifdef CONFIG_X86_32
-/* 32-bit kernels use a trap gate for INT80, and the asm code calls here. */
-__visible
-#else
-/* 64-bit kernels use do_syscall_32_irqs_off() instead. */
-static
-#endif
-__always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
+static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
{
struct thread_info *ti = pt_regs_to_thread_info(regs);
unsigned int nr = (unsigned int)regs->orig_ax;
@@ -393,14 +398,13 @@ __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
syscall_return_slowpath(regs);
}
-#ifdef CONFIG_X86_64
-/* Handles INT80 on 64-bit kernels */
-__visible void do_syscall_32_irqs_off(struct pt_regs *regs)
+/* Handles int $0x80 */
+__visible void do_int80_syscall_32(struct pt_regs *regs)
{
+ enter_from_user_mode();
local_irq_enable();
do_syscall_32_irqs_on(regs);
}
-#endif
/* Returns 0 to return using IRET or 1 to return using SYSEXIT/SYSRETL. */
__visible long do_fast_syscall_32(struct pt_regs *regs)
@@ -420,12 +424,11 @@ __visible long do_fast_syscall_32(struct pt_regs *regs)
*/
regs->ip = landing_pad;
- /*
- * Fetch EBP from where the vDSO stashed it.
- *
- * WARNING: We are in CONTEXT_USER and RCU isn't paying attention!
- */
+ enter_from_user_mode();
+
local_irq_enable();
+
+ /* Fetch EBP from where the vDSO stashed it. */
if (
#ifdef CONFIG_X86_64
/*
@@ -443,9 +446,6 @@ __visible long do_fast_syscall_32(struct pt_regs *regs)
/* User code screwed up. */
local_irq_disable();
regs->ax = -EFAULT;
-#ifdef CONFIG_CONTEXT_TRACKING
- enter_from_user_mode();
-#endif
prepare_exit_to_usermode(regs);
return 0; /* Keep it simple: use IRET. */
}
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index bb3e376d0f33..10868aa734dc 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -40,7 +40,7 @@
#include <asm/processor-flags.h>
#include <asm/ftrace.h>
#include <asm/irq_vectors.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
#include <asm/alternative-asm.h>
#include <asm/asm.h>
#include <asm/smap.h>
@@ -287,14 +287,64 @@ need_resched:
END(resume_kernel)
#endif
- # SYSENTER call handler stub
+GLOBAL(__begin_SYSENTER_singlestep_region)
+/*
+ * All code from here through __end_SYSENTER_singlestep_region is subject
+ * to being single-stepped if a user program sets TF and executes SYSENTER.
+ * There is absolutely nothing that we can do to prevent this from happening
+ * (thanks Intel!). To keep our handling of this situation as simple as
+ * possible, we handle TF just like AC and NT, except that our #DB handler
+ * will ignore all of the single-step traps generated in this range.
+ */
+
+#ifdef CONFIG_XEN
+/*
+ * Xen doesn't set %esp to be precisely what the normal SYSENTER
+ * entry point expects, so fix it up before using the normal path.
+ */
+ENTRY(xen_sysenter_target)
+ addl $5*4, %esp /* remove xen-provided frame */
+ jmp sysenter_past_esp
+#endif
+
+/*
+ * 32-bit SYSENTER entry.
+ *
+ * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
+ * if X86_FEATURE_SEP is available. This is the preferred system call
+ * entry on 32-bit systems.
+ *
+ * The SYSENTER instruction, in principle, should *only* occur in the
+ * vDSO. In practice, a small number of Android devices were shipped
+ * with a copy of Bionic that inlined a SYSENTER instruction. This
+ * never happened in any of Google's Bionic versions -- it only happened
+ * in a narrow range of Intel-provided versions.
+ *
+ * SYSENTER loads SS, ESP, CS, and EIP from previously programmed MSRs.
+ * IF and VM in RFLAGS are cleared (IOW: interrupts are off).
+ * SYSENTER does not save anything on the stack,
+ * and does not save old EIP (!!!), ESP, or EFLAGS.
+ *
+ * To avoid losing track of EFLAGS.VM (and thus potentially corrupting
+ * user and/or vm86 state), we explicitly disable the SYSENTER
+ * instruction in vm86 mode by reprogramming the MSRs.
+ *
+ * Arguments:
+ * eax system call number
+ * ebx arg1
+ * ecx arg2
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * ebp user stack
+ * 0(%ebp) arg6
+ */
ENTRY(entry_SYSENTER_32)
movl TSS_sysenter_sp0(%esp), %esp
sysenter_past_esp:
pushl $__USER_DS /* pt_regs->ss */
pushl %ebp /* pt_regs->sp (stashed in bp) */
pushfl /* pt_regs->flags (except IF = 0) */
- ASM_CLAC /* Clear AC after saving FLAGS */
orl $X86_EFLAGS_IF, (%esp) /* Fix IF */
pushl $__USER_CS /* pt_regs->cs */
pushl $0 /* pt_regs->ip = 0 (placeholder) */
@@ -302,6 +352,29 @@ sysenter_past_esp:
SAVE_ALL pt_regs_ax=$-ENOSYS /* save rest */
/*
+ * SYSENTER doesn't filter flags, so we need to clear NT, AC
+ * and TF ourselves. To save a few cycles, we can check whether
+ * either was set instead of doing an unconditional popfq.
+ * This needs to happen before enabling interrupts so that
+ * we don't get preempted with NT set.
+ *
+ * If TF is set, we will single-step all the way to here -- do_debug
+ * will ignore all the traps. (Yes, this is slow, but so is
+ * single-stepping in general. This allows us to avoid having
+ * a more complicated code to handle the case where a user program
+ * forces us to single-step through the SYSENTER entry code.)
+ *
+ * NB.: .Lsysenter_fix_flags is a label with the code under it moved
+ * out-of-line as an optimization: NT is unlikely to be set in the
+ * majority of the cases and instead of polluting the I$ unnecessarily,
+ * we're keeping that code behind a branch which will predict as
+ * not-taken and therefore its instructions won't be fetched.
+ */
+ testl $X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, PT_EFLAGS(%esp)
+ jnz .Lsysenter_fix_flags
+.Lsysenter_flags_fixed:
+
+ /*
* User mode is traced as though IRQs are on, and SYSENTER
* turned them off.
*/
@@ -327,6 +400,15 @@ sysenter_past_esp:
popl %eax /* pt_regs->ax */
/*
+ * Restore all flags except IF. (We restore IF separately because
+ * STI gives a one-instruction window in which we won't be interrupted,
+ * whereas POPF does not.)
+ */
+ addl $PT_EFLAGS-PT_DS, %esp /* point esp at pt_regs->flags */
+ btr $X86_EFLAGS_IF_BIT, (%esp)
+ popfl
+
+ /*
* Return back to the vDSO, which will pop ecx and edx.
* Don't bother with DS and ES (they already contain __USER_DS).
*/
@@ -339,28 +421,63 @@ sysenter_past_esp:
.popsection
_ASM_EXTABLE(1b, 2b)
PTGS_TO_GS_EX
+
+.Lsysenter_fix_flags:
+ pushl $X86_EFLAGS_FIXED
+ popfl
+ jmp .Lsysenter_flags_fixed
+GLOBAL(__end_SYSENTER_singlestep_region)
ENDPROC(entry_SYSENTER_32)
- # system call handler stub
+/*
+ * 32-bit legacy system call entry.
+ *
+ * 32-bit x86 Linux system calls traditionally used the INT $0x80
+ * instruction. INT $0x80 lands here.
+ *
+ * This entry point can be used by any 32-bit perform system calls.
+ * Instances of INT $0x80 can be found inline in various programs and
+ * libraries. It is also used by the vDSO's __kernel_vsyscall
+ * fallback for hardware that doesn't support a faster entry method.
+ * Restarted 32-bit system calls also fall back to INT $0x80
+ * regardless of what instruction was originally used to do the system
+ * call. (64-bit programs can use INT $0x80 as well, but they can
+ * only run on 64-bit kernels and therefore land in
+ * entry_INT80_compat.)
+ *
+ * This is considered a slow path. It is not used by most libc
+ * implementations on modern hardware except during process startup.
+ *
+ * Arguments:
+ * eax system call number
+ * ebx arg1
+ * ecx arg2
+ * edx arg3
+ * esi arg4
+ * edi arg5
+ * ebp arg6
+ */
ENTRY(entry_INT80_32)
ASM_CLAC
pushl %eax /* pt_regs->orig_ax */
SAVE_ALL pt_regs_ax=$-ENOSYS /* save rest */
/*
- * User mode is traced as though IRQs are on. Unlike the 64-bit
- * case, INT80 is a trap gate on 32-bit kernels, so interrupts
- * are already on (unless user code is messing around with iopl).
+ * User mode is traced as though IRQs are on, and the interrupt gate
+ * turned them off.
*/
+ TRACE_IRQS_OFF
movl %esp, %eax
- call do_syscall_32_irqs_on
+ call do_int80_syscall_32
.Lsyscall_32_done:
restore_all:
TRACE_IRQS_IRET
restore_all_notrace:
#ifdef CONFIG_X86_ESPFIX32
+ ALTERNATIVE "jmp restore_nocheck", "", X86_BUG_ESPFIX
+
movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
/*
* Warning: PT_OLDSS(%esp) contains the wrong/random values if we
@@ -387,19 +504,6 @@ ENTRY(iret_exc )
#ifdef CONFIG_X86_ESPFIX32
ldt_ss:
-#ifdef CONFIG_PARAVIRT
- /*
- * The kernel can't run on a non-flat stack if paravirt mode
- * is active. Rather than try to fixup the high bits of
- * ESP, bypass this code entirely. This may break DOSemu
- * and/or Wine support in a paravirt VM, although the option
- * is still available to implement the setting of the high
- * 16-bits in the INTERRUPT_RETURN paravirt-op.
- */
- cmpl $0, pv_info+PARAVIRT_enabled
- jne restore_nocheck
-#endif
-
/*
* Setup and switch to ESPFIX stack
*
@@ -632,14 +736,6 @@ ENTRY(spurious_interrupt_bug)
END(spurious_interrupt_bug)
#ifdef CONFIG_XEN
-/*
- * Xen doesn't set %esp to be precisely what the normal SYSENTER
- * entry point expects, so fix it up before using the normal path.
- */
-ENTRY(xen_sysenter_target)
- addl $5*4, %esp /* remove xen-provided frame */
- jmp sysenter_past_esp
-
ENTRY(xen_hypervisor_callback)
pushl $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
@@ -939,51 +1035,48 @@ error_code:
jmp ret_from_exception
END(page_fault)
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-.macro FIX_STACK offset ok label
- cmpw $__KERNEL_CS, 4(%esp)
- jne \ok
-\label:
- movl TSS_sysenter_sp0 + \offset(%esp), %esp
- pushfl
- pushl $__KERNEL_CS
- pushl $sysenter_past_esp
-.endm
-
ENTRY(debug)
+ /*
+ * #DB can happen at the first instruction of
+ * entry_SYSENTER_32 or in Xen's SYSENTER prologue. If this
+ * happens, then we will be running on a very small stack. We
+ * need to detect this condition and switch to the thread
+ * stack before calling any C code at all.
+ *
+ * If you edit this code, keep in mind that NMIs can happen in here.
+ */
ASM_CLAC
- cmpl $entry_SYSENTER_32, (%esp)
- jne debug_stack_correct
- FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
-debug_stack_correct:
pushl $-1 # mark this as an int
SAVE_ALL
- TRACE_IRQS_OFF
xorl %edx, %edx # error code 0
movl %esp, %eax # pt_regs pointer
+
+ /* Are we currently on the SYSENTER stack? */
+ PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+ subl %eax, %ecx /* ecx = (end of SYSENTER_stack) - esp */
+ cmpl $SIZEOF_SYSENTER_stack, %ecx
+ jb .Ldebug_from_sysenter_stack
+
+ TRACE_IRQS_OFF
+ call do_debug
+ jmp ret_from_exception
+
+.Ldebug_from_sysenter_stack:
+ /* We're on the SYSENTER stack. Switch off. */
+ movl %esp, %ebp
+ movl PER_CPU_VAR(cpu_current_top_of_stack), %esp
+ TRACE_IRQS_OFF
call do_debug
+ movl %ebp, %esp
jmp ret_from_exception
END(debug)
/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
+ * NMI is doubly nasty. It can happen on the first instruction of
+ * entry_SYSENTER_32 (just like #DB), but it can also interrupt the beginning
+ * of the #DB handler even if that #DB in turn hit before entry_SYSENTER_32
+ * switched stacks. We handle both conditions by simply checking whether we
+ * interrupted kernel code running on the SYSENTER stack.
*/
ENTRY(nmi)
ASM_CLAC
@@ -994,41 +1087,32 @@ ENTRY(nmi)
popl %eax
je nmi_espfix_stack
#endif
- cmpl $entry_SYSENTER_32, (%esp)
- je nmi_stack_fixup
- pushl %eax
- movl %esp, %eax
- /*
- * Do not access memory above the end of our stack page,
- * it might not exist.
- */
- andl $(THREAD_SIZE-1), %eax
- cmpl $(THREAD_SIZE-20), %eax
- popl %eax
- jae nmi_stack_correct
- cmpl $entry_SYSENTER_32, 12(%esp)
- je nmi_debug_stack_check
-nmi_stack_correct:
- pushl %eax
+
+ pushl %eax # pt_regs->orig_ax
SAVE_ALL
xorl %edx, %edx # zero error code
movl %esp, %eax # pt_regs pointer
+
+ /* Are we currently on the SYSENTER stack? */
+ PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+ subl %eax, %ecx /* ecx = (end of SYSENTER_stack) - esp */
+ cmpl $SIZEOF_SYSENTER_stack, %ecx
+ jb .Lnmi_from_sysenter_stack
+
+ /* Not on SYSENTER stack. */
call do_nmi
jmp restore_all_notrace
-nmi_stack_fixup:
- FIX_STACK 12, nmi_stack_correct, 1
- jmp nmi_stack_correct
-
-nmi_debug_stack_check:
- cmpw $__KERNEL_CS, 16(%esp)
- jne nmi_stack_correct
- cmpl $debug, (%esp)
- jb nmi_stack_correct
- cmpl $debug_esp_fix_insn, (%esp)
- ja nmi_stack_correct
- FIX_STACK 24, nmi_stack_correct, 1
- jmp nmi_stack_correct
+.Lnmi_from_sysenter_stack:
+ /*
+ * We're on the SYSENTER stack. Switch off. No one (not even debug)
+ * is using the thread stack right now, so it's safe for us to use it.
+ */
+ movl %esp, %ebp
+ movl PER_CPU_VAR(cpu_current_top_of_stack), %esp
+ call do_nmi
+ movl %ebp, %esp
+ jmp restore_all_notrace
#ifdef CONFIG_X86_ESPFIX32
nmi_espfix_stack:
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 9d34d3cfceb6..858b555e274b 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -103,6 +103,16 @@ ENDPROC(native_usergs_sysret64)
/*
* 64-bit SYSCALL instruction entry. Up to 6 arguments in registers.
*
+ * This is the only entry point used for 64-bit system calls. The
+ * hardware interface is reasonably well designed and the register to
+ * argument mapping Linux uses fits well with the registers that are
+ * available when SYSCALL is used.
+ *
+ * SYSCALL instructions can be found inlined in libc implementations as
+ * well as some other programs and libraries. There are also a handful
+ * of SYSCALL instructions in the vDSO used, for example, as a
+ * clock_gettimeofday fallback.
+ *
* 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
* then loads new ss, cs, and rip from previously programmed MSRs.
* rflags gets masked by a value from another MSR (so CLD and CLAC
@@ -145,17 +155,11 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
movq %rsp, PER_CPU_VAR(rsp_scratch)
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+ TRACE_IRQS_OFF
+
/* Construct struct pt_regs on stack */
pushq $__USER_DS /* pt_regs->ss */
pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
- /*
- * Re-enable interrupts.
- * We use 'rsp_scratch' as a scratch space, hence irq-off block above
- * must execute atomically in the face of possible interrupt-driven
- * task preemption. We must enable interrupts only after we're done
- * with using rsp_scratch:
- */
- ENABLE_INTERRUPTS(CLBR_NONE)
pushq %r11 /* pt_regs->flags */
pushq $__USER_CS /* pt_regs->cs */
pushq %rcx /* pt_regs->ip */
@@ -171,9 +175,21 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
pushq %r11 /* pt_regs->r11 */
sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
- testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz tracesys
+ /*
+ * If we need to do entry work or if we guess we'll need to do
+ * exit work, go straight to the slow path.
+ */
+ testl $_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz entry_SYSCALL64_slow_path
+
entry_SYSCALL_64_fastpath:
+ /*
+ * Easy case: enable interrupts and issue the syscall. If the syscall
+ * needs pt_regs, we'll call a stub that disables interrupts again
+ * and jumps to the slow path.
+ */
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
#if __SYSCALL_MASK == ~0
cmpq $__NR_syscall_max, %rax
#else
@@ -182,103 +198,56 @@ entry_SYSCALL_64_fastpath:
#endif
ja 1f /* return -ENOSYS (already in pt_regs->ax) */
movq %r10, %rcx
+
+ /*
+ * This call instruction is handled specially in stub_ptregs_64.
+ * It might end up jumping to the slow path. If it jumps, RAX
+ * and all argument registers are clobbered.
+ */
call *sys_call_table(, %rax, 8)
+.Lentry_SYSCALL_64_after_fastpath_call:
+
movq %rax, RAX(%rsp)
1:
-/*
- * Syscall return path ending with SYSRET (fast path).
- * Has incompletely filled pt_regs.
- */
- LOCKDEP_SYS_EXIT
- /*
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- DISABLE_INTERRUPTS(CLBR_NONE)
/*
- * We must check ti flags with interrupts (or at least preemption)
- * off because we must *never* return to userspace without
- * processing exit work that is enqueued if we're preempted here.
- * In particular, returning to userspace with any of the one-shot
- * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
- * very bad.
+ * If we get here, then we know that pt_regs is clean for SYSRET64.
+ * If we see that no exit work is required (which we are required
+ * to check with IRQs off), then we can go straight to SYSRET64.
*/
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
+ jnz 1f
- RESTORE_C_REGS_EXCEPT_RCX_R11
+ LOCKDEP_SYS_EXIT
+ TRACE_IRQS_ON /* user mode is traced as IRQs on */
movq RIP(%rsp), %rcx
movq EFLAGS(%rsp), %r11
+ RESTORE_C_REGS_EXCEPT_RCX_R11
movq RSP(%rsp), %rsp
- /*
- * 64-bit SYSRET restores rip from rcx,
- * rflags from r11 (but RF and VM bits are forced to 0),
- * cs and ss are loaded from MSRs.
- * Restoration of rflags re-enables interrupts.
- *
- * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
- * descriptor is not reinitialized. This means that we should
- * avoid SYSRET with SS == NULL, which could happen if we schedule,
- * exit the kernel, and re-enter using an interrupt vector. (All
- * interrupt entries on x86_64 set SS to NULL.) We prevent that
- * from happening by reloading SS in __switch_to. (Actually
- * detecting the failure in 64-bit userspace is tricky but can be
- * done.)
- */
USERGS_SYSRET64
-GLOBAL(int_ret_from_sys_call_irqs_off)
+1:
+ /*
+ * The fast path looked good when we started, but something changed
+ * along the way and we need to switch to the slow path. Calling
+ * raise(3) will trigger this, for example. IRQs are off.
+ */
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
- jmp int_ret_from_sys_call
-
- /* Do syscall entry tracing */
-tracesys:
- movq %rsp, %rdi
- movl $AUDIT_ARCH_X86_64, %esi
- call syscall_trace_enter_phase1
- test %rax, %rax
- jnz tracesys_phase2 /* if needed, run the slow path */
- RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */
- movq ORIG_RAX(%rsp), %rax
- jmp entry_SYSCALL_64_fastpath /* and return to the fast path */
-
-tracesys_phase2:
SAVE_EXTRA_REGS
movq %rsp, %rdi
- movl $AUDIT_ARCH_X86_64, %esi
- movq %rax, %rdx
- call syscall_trace_enter_phase2
-
- /*
- * Reload registers from stack in case ptrace changed them.
- * We don't reload %rax because syscall_trace_entry_phase2() returned
- * the value it wants us to use in the table lookup.
- */
- RESTORE_C_REGS_EXCEPT_RAX
- RESTORE_EXTRA_REGS
-#if __SYSCALL_MASK == ~0
- cmpq $__NR_syscall_max, %rax
-#else
- andl $__SYSCALL_MASK, %eax
- cmpl $__NR_syscall_max, %eax
-#endif
- ja 1f /* return -ENOSYS (already in pt_regs->ax) */
- movq %r10, %rcx /* fixup for C */
- call *sys_call_table(, %rax, 8)
- movq %rax, RAX(%rsp)
-1:
- /* Use IRET because user could have changed pt_regs->foo */
+ call syscall_return_slowpath /* returns with IRQs disabled */
+ jmp return_from_SYSCALL_64
-/*
- * Syscall return path ending with IRET.
- * Has correct iret frame.
- */
-GLOBAL(int_ret_from_sys_call)
+entry_SYSCALL64_slow_path:
+ /* IRQs are off. */
SAVE_EXTRA_REGS
movq %rsp, %rdi
- call syscall_return_slowpath /* returns with IRQs disabled */
+ call do_syscall_64 /* returns with IRQs disabled */
+
+return_from_SYSCALL_64:
RESTORE_EXTRA_REGS
TRACE_IRQS_IRETQ /* we're about to change IF */
@@ -355,83 +324,45 @@ opportunistic_sysret_failed:
jmp restore_c_regs_and_iret
END(entry_SYSCALL_64)
+ENTRY(stub_ptregs_64)
+ /*
+ * Syscalls marked as needing ptregs land here.
+ * If we are on the fast path, we need to save the extra regs,
+ * which we achieve by trying again on the slow path. If we are on
+ * the slow path, the extra regs are already saved.
+ *
+ * RAX stores a pointer to the C function implementing the syscall.
+ * IRQs are on.
+ */
+ cmpq $.Lentry_SYSCALL_64_after_fastpath_call, (%rsp)
+ jne 1f
- .macro FORK_LIKE func
-ENTRY(stub_\func)
- SAVE_EXTRA_REGS 8
- jmp sys_\func
-END(stub_\func)
- .endm
-
- FORK_LIKE clone
- FORK_LIKE fork
- FORK_LIKE vfork
-
-ENTRY(stub_execve)
- call sys_execve
-return_from_execve:
- testl %eax, %eax
- jz 1f
- /* exec failed, can use fast SYSRET code path in this case */
- ret
-1:
- /* must use IRET code path (pt_regs->cs may have changed) */
- addq $8, %rsp
- ZERO_EXTRA_REGS
- movq %rax, RAX(%rsp)
- jmp int_ret_from_sys_call
-END(stub_execve)
-/*
- * Remaining execve stubs are only 7 bytes long.
- * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
- */
- .align 8
-GLOBAL(stub_execveat)
- call sys_execveat
- jmp return_from_execve
-END(stub_execveat)
-
-#if defined(CONFIG_X86_X32_ABI)
- .align 8
-GLOBAL(stub_x32_execve)
- call compat_sys_execve
- jmp return_from_execve
-END(stub_x32_execve)
- .align 8
-GLOBAL(stub_x32_execveat)
- call compat_sys_execveat
- jmp return_from_execve
-END(stub_x32_execveat)
-#endif
-
-/*
- * sigreturn is special because it needs to restore all registers on return.
- * This cannot be done with SYSRET, so use the IRET return path instead.
- */
-ENTRY(stub_rt_sigreturn)
/*
- * SAVE_EXTRA_REGS result is not normally needed:
- * sigreturn overwrites all pt_regs->GPREGS.
- * But sigreturn can fail (!), and there is no easy way to detect that.
- * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
- * we SAVE_EXTRA_REGS here.
+ * Called from fast path -- disable IRQs again, pop return address
+ * and jump to slow path
*/
- SAVE_EXTRA_REGS 8
- call sys_rt_sigreturn
-return_from_stub:
- addq $8, %rsp
- RESTORE_EXTRA_REGS
- movq %rax, RAX(%rsp)
- jmp int_ret_from_sys_call
-END(stub_rt_sigreturn)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ popq %rax
+ jmp entry_SYSCALL64_slow_path
-#ifdef CONFIG_X86_X32_ABI
-ENTRY(stub_x32_rt_sigreturn)
- SAVE_EXTRA_REGS 8
- call sys32_x32_rt_sigreturn
- jmp return_from_stub
-END(stub_x32_rt_sigreturn)
-#endif
+1:
+ /* Called from C */
+ jmp *%rax /* called from C */
+END(stub_ptregs_64)
+
+.macro ptregs_stub func
+ENTRY(ptregs_\func)
+ leaq \func(%rip), %rax
+ jmp stub_ptregs_64
+END(ptregs_\func)
+.endm
+
+/* Instantiate ptregs_stub for each ptregs-using syscall */
+#define __SYSCALL_64_QUAL_(sym)
+#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_stub sym
+#define __SYSCALL_64(nr, sym, qual) __SYSCALL_64_QUAL_##qual(sym)
+#include <asm/syscalls_64.h>
/*
* A newly forked process directly context switches into this address.
@@ -439,7 +370,6 @@ END(stub_x32_rt_sigreturn)
* rdi: prev task we switched from
*/
ENTRY(ret_from_fork)
-
LOCK ; btr $TIF_FORK, TI_flags(%r8)
pushq $0x0002
@@ -447,28 +377,32 @@ ENTRY(ret_from_fork)
call schedule_tail /* rdi: 'prev' task parameter */
- RESTORE_EXTRA_REGS
-
testb $3, CS(%rsp) /* from kernel_thread? */
+ jnz 1f
/*
- * By the time we get here, we have no idea whether our pt_regs,
- * ti flags, and ti status came from the 64-bit SYSCALL fast path,
- * the slow path, or one of the 32-bit compat paths.
- * Use IRET code path to return, since it can safely handle
- * all of the above.
+ * We came from kernel_thread. This code path is quite twisted, and
+ * someone should clean it up.
+ *
+ * copy_thread_tls stashes the function pointer in RBX and the
+ * parameter to be passed in RBP. The called function is permitted
+ * to call do_execve and thereby jump to user mode.
*/
- jnz int_ret_from_sys_call
+ movq RBP(%rsp), %rdi
+ call *RBX(%rsp)
+ movl $0, RAX(%rsp)
/*
- * We came from kernel_thread
- * nb: we depend on RESTORE_EXTRA_REGS above
+ * Fall through as though we're exiting a syscall. This makes a
+ * twisted sort of sense if we just called do_execve.
*/
- movq %rbp, %rdi
- call *%rbx
- movl $0, RAX(%rsp)
- RESTORE_EXTRA_REGS
- jmp int_ret_from_sys_call
+
+1:
+ movq %rsp, %rdi
+ call syscall_return_slowpath /* returns with IRQs disabled */
+ TRACE_IRQS_ON /* user mode is traced as IRQS on */
+ SWAPGS
+ jmp restore_regs_and_iret
END(ret_from_fork)
/*
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 3c990eeee40b..847f2f0c31e5 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -19,12 +19,21 @@
.section .entry.text, "ax"
/*
- * 32-bit SYSENTER instruction entry.
+ * 32-bit SYSENTER entry.
*
- * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
- * IF and VM in rflags are cleared (IOW: interrupts are off).
+ * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
+ * on 64-bit kernels running on Intel CPUs.
+ *
+ * The SYSENTER instruction, in principle, should *only* occur in the
+ * vDSO. In practice, a small number of Android devices were shipped
+ * with a copy of Bionic that inlined a SYSENTER instruction. This
+ * never happened in any of Google's Bionic versions -- it only happened
+ * in a narrow range of Intel-provided versions.
+ *
+ * SYSENTER loads SS, RSP, CS, and RIP from previously programmed MSRs.
+ * IF and VM in RFLAGS are cleared (IOW: interrupts are off).
* SYSENTER does not save anything on the stack,
- * and does not save old rip (!!!) and rflags.
+ * and does not save old RIP (!!!), RSP, or RFLAGS.
*
* Arguments:
* eax system call number
@@ -35,10 +44,6 @@
* edi arg5
* ebp user stack
* 0(%ebp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
*/
ENTRY(entry_SYSENTER_compat)
/* Interrupts are off on entry. */
@@ -66,8 +71,6 @@ ENTRY(entry_SYSENTER_compat)
*/
pushfq /* pt_regs->flags (except IF = 0) */
orl $X86_EFLAGS_IF, (%rsp) /* Fix saved flags */
- ASM_CLAC /* Clear AC after saving FLAGS */
-
pushq $__USER32_CS /* pt_regs->cs */
xorq %r8,%r8
pushq %r8 /* pt_regs->ip = 0 (placeholder) */
@@ -90,19 +93,25 @@ ENTRY(entry_SYSENTER_compat)
cld
/*
- * Sysenter doesn't filter flags, so we need to clear NT
+ * SYSENTER doesn't filter flags, so we need to clear NT and AC
* ourselves. To save a few cycles, we can check whether
- * NT was set instead of doing an unconditional popfq.
+ * either was set instead of doing an unconditional popfq.
* This needs to happen before enabling interrupts so that
* we don't get preempted with NT set.
*
+ * If TF is set, we will single-step all the way to here -- do_debug
+ * will ignore all the traps. (Yes, this is slow, but so is
+ * single-stepping in general. This allows us to avoid having
+ * a more complicated code to handle the case where a user program
+ * forces us to single-step through the SYSENTER entry code.)
+ *
* NB.: .Lsysenter_fix_flags is a label with the code under it moved
* out-of-line as an optimization: NT is unlikely to be set in the
* majority of the cases and instead of polluting the I$ unnecessarily,
* we're keeping that code behind a branch which will predict as
* not-taken and therefore its instructions won't be fetched.
*/
- testl $X86_EFLAGS_NT, EFLAGS(%rsp)
+ testl $X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, EFLAGS(%rsp)
jnz .Lsysenter_fix_flags
.Lsysenter_flags_fixed:
@@ -123,20 +132,42 @@ ENTRY(entry_SYSENTER_compat)
pushq $X86_EFLAGS_FIXED
popfq
jmp .Lsysenter_flags_fixed
+GLOBAL(__end_entry_SYSENTER_compat)
ENDPROC(entry_SYSENTER_compat)
/*
- * 32-bit SYSCALL instruction entry.
+ * 32-bit SYSCALL entry.
+ *
+ * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
+ * on 64-bit kernels running on AMD CPUs.
+ *
+ * The SYSCALL instruction, in principle, should *only* occur in the
+ * vDSO. In practice, it appears that this really is the case.
+ * As evidence:
+ *
+ * - The calling convention for SYSCALL has changed several times without
+ * anyone noticing.
*
- * 32-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
+ * - Prior to the in-kernel X86_BUG_SYSRET_SS_ATTRS fixup, anything
+ * user task that did SYSCALL without immediately reloading SS
+ * would randomly crash.
*
- * Note: rflags saving+masking-with-MSR happens only in Long mode
+ * - Most programmers do not directly target AMD CPUs, and the 32-bit
+ * SYSCALL instruction does not exist on Intel CPUs. Even on AMD
+ * CPUs, Linux disables the SYSCALL instruction on 32-bit kernels
+ * because the SYSCALL instruction in legacy/native 32-bit mode (as
+ * opposed to compat mode) is sufficiently poorly designed as to be
+ * essentially unusable.
+ *
+ * 32-bit SYSCALL saves RIP to RCX, clears RFLAGS.RF, then saves
+ * RFLAGS to R11, then loads new SS, CS, and RIP from previously
+ * programmed MSRs. RFLAGS gets masked by a value from another MSR
+ * (so CLD and CLAC are not needed). SYSCALL does not save anything on
+ * the stack and does not change RSP.
+ *
+ * Note: RFLAGS saving+masking-with-MSR happens only in Long mode
* (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it).
- * Don't get confused: rflags saving+masking depends on Long Mode Active bit
+ * Don't get confused: RFLAGS saving+masking depends on Long Mode Active bit
* (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
* or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
*
@@ -236,7 +267,21 @@ sysret32_from_system_call:
END(entry_SYSCALL_compat)
/*
- * Emulated IA32 system calls via int 0x80.
+ * 32-bit legacy system call entry.
+ *
+ * 32-bit x86 Linux system calls traditionally used the INT $0x80
+ * instruction. INT $0x80 lands here.
+ *
+ * This entry point can be used by 32-bit and 64-bit programs to perform
+ * 32-bit system calls. Instances of INT $0x80 can be found inline in
+ * various programs and libraries. It is also used by the vDSO's
+ * __kernel_vsyscall fallback for hardware that doesn't support a faster
+ * entry method. Restarted 32-bit system calls also fall back to INT
+ * $0x80 regardless of what instruction was originally used to do the
+ * system call.
+ *
+ * This is considered a slow path. It is not used by most libc
+ * implementations on modern hardware except during process startup.
*
* Arguments:
* eax system call number
@@ -245,17 +290,8 @@ END(entry_SYSCALL_compat)
* edx arg3
* esi arg4
* edi arg5
- * ebp arg6 (note: not saved in the stack frame, should not be touched)
- *
- * Notes:
- * Uses the same stack frame as the x86-64 version.
- * All registers except eax must be saved (but ptrace may violate that).
- * Arguments are zero extended. For system calls that want sign extension and
- * take long arguments a wrapper is needed. Most calls can just be called
- * directly.
- * Assumes it is only called from user space and entered with interrupts off.
+ * ebp arg6
*/
-
ENTRY(entry_INT80_compat)
/*
* Interrupts are off on entry.
@@ -300,7 +336,7 @@ ENTRY(entry_INT80_compat)
TRACE_IRQS_OFF
movq %rsp, %rdi
- call do_syscall_32_irqs_off
+ call do_int80_syscall_32
.Lsyscall_32_done:
/* Go back to user mode. */
diff --git a/arch/x86/entry/syscall_32.c b/arch/x86/entry/syscall_32.c
index 9a6649857106..8f895ee13a1c 100644
--- a/arch/x86/entry/syscall_32.c
+++ b/arch/x86/entry/syscall_32.c
@@ -6,17 +6,11 @@
#include <asm/asm-offsets.h>
#include <asm/syscall.h>
-#ifdef CONFIG_IA32_EMULATION
-#define SYM(sym, compat) compat
-#else
-#define SYM(sym, compat) sym
-#endif
-
-#define __SYSCALL_I386(nr, sym, compat) extern asmlinkage long SYM(sym, compat)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
+#define __SYSCALL_I386(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
#include <asm/syscalls_32.h>
#undef __SYSCALL_I386
-#define __SYSCALL_I386(nr, sym, compat) [nr] = SYM(sym, compat),
+#define __SYSCALL_I386(nr, sym, qual) [nr] = sym,
extern asmlinkage long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
diff --git a/arch/x86/entry/syscall_64.c b/arch/x86/entry/syscall_64.c
index 41283d22be7a..9dbc5abb6162 100644
--- a/arch/x86/entry/syscall_64.c
+++ b/arch/x86/entry/syscall_64.c
@@ -6,19 +6,14 @@
#include <asm/asm-offsets.h>
#include <asm/syscall.h>
-#define __SYSCALL_COMMON(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
+#define __SYSCALL_64_QUAL_(sym) sym
+#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_##sym
-#ifdef CONFIG_X86_X32_ABI
-# define __SYSCALL_X32(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
-#else
-# define __SYSCALL_X32(nr, sym, compat) /* nothing */
-#endif
-
-#define __SYSCALL_64(nr, sym, compat) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
+#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long __SYSCALL_64_QUAL_##qual(sym)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
#include <asm/syscalls_64.h>
#undef __SYSCALL_64
-#define __SYSCALL_64(nr, sym, compat) [nr] = sym,
+#define __SYSCALL_64(nr, sym, qual) [nr] = __SYSCALL_64_QUAL_##qual(sym),
extern long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index dc1040a50bdc..2e5b565adacc 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -21,7 +21,7 @@
12 common brk sys_brk
13 64 rt_sigaction sys_rt_sigaction
14 common rt_sigprocmask sys_rt_sigprocmask
-15 64 rt_sigreturn stub_rt_sigreturn
+15 64 rt_sigreturn sys_rt_sigreturn/ptregs
16 64 ioctl sys_ioctl
17 common pread64 sys_pread64
18 common pwrite64 sys_pwrite64
@@ -62,10 +62,10 @@
53 common socketpair sys_socketpair
54 64 setsockopt sys_setsockopt
55 64 getsockopt sys_getsockopt
-56 common clone stub_clone
-57 common fork stub_fork
-58 common vfork stub_vfork
-59 64 execve stub_execve
+56 common clone sys_clone/ptregs
+57 common fork sys_fork/ptregs
+58 common vfork sys_vfork/ptregs
+59 64 execve sys_execve/ptregs
60 common exit sys_exit
61 common wait4 sys_wait4
62 common kill sys_kill
@@ -178,7 +178,7 @@
169 common reboot sys_reboot
170 common sethostname sys_sethostname
171 common setdomainname sys_setdomainname
-172 common iopl sys_iopl
+172 common iopl sys_iopl/ptregs
173 common ioperm sys_ioperm
174 64 create_module
175 common init_module sys_init_module
@@ -328,7 +328,7 @@
319 common memfd_create sys_memfd_create
320 common kexec_file_load sys_kexec_file_load
321 common bpf sys_bpf
-322 64 execveat stub_execveat
+322 64 execveat sys_execveat/ptregs
323 common userfaultfd sys_userfaultfd
324 common membarrier sys_membarrier
325 common mlock2 sys_mlock2
@@ -339,14 +339,14 @@
# for native 64-bit operation.
#
512 x32 rt_sigaction compat_sys_rt_sigaction
-513 x32 rt_sigreturn stub_x32_rt_sigreturn
+513 x32 rt_sigreturn sys32_x32_rt_sigreturn
514 x32 ioctl compat_sys_ioctl
515 x32 readv compat_sys_readv
516 x32 writev compat_sys_writev
517 x32 recvfrom compat_sys_recvfrom
518 x32 sendmsg compat_sys_sendmsg
519 x32 recvmsg compat_sys_recvmsg
-520 x32 execve stub_x32_execve
+520 x32 execve compat_sys_execve/ptregs
521 x32 ptrace compat_sys_ptrace
522 x32 rt_sigpending compat_sys_rt_sigpending
523 x32 rt_sigtimedwait compat_sys_rt_sigtimedwait
@@ -371,4 +371,4 @@
542 x32 getsockopt compat_sys_getsockopt
543 x32 io_setup compat_sys_io_setup
544 x32 io_submit compat_sys_io_submit
-545 x32 execveat stub_x32_execveat
+545 x32 execveat compat_sys_execveat/ptregs
diff --git a/arch/x86/entry/syscalls/syscalltbl.sh b/arch/x86/entry/syscalls/syscalltbl.sh
index 0e7f8ec071e7..cd3d3015d7df 100644
--- a/arch/x86/entry/syscalls/syscalltbl.sh
+++ b/arch/x86/entry/syscalls/syscalltbl.sh
@@ -3,13 +3,63 @@
in="$1"
out="$2"
+syscall_macro() {
+ abi="$1"
+ nr="$2"
+ entry="$3"
+
+ # Entry can be either just a function name or "function/qualifier"
+ real_entry="${entry%%/*}"
+ qualifier="${entry:${#real_entry}}" # Strip the function name
+ qualifier="${qualifier:1}" # Strip the slash, if any
+
+ echo "__SYSCALL_${abi}($nr, $real_entry, $qualifier)"
+}
+
+emit() {
+ abi="$1"
+ nr="$2"
+ entry="$3"
+ compat="$4"
+
+ if [ "$abi" == "64" -a -n "$compat" ]; then
+ echo "a compat entry for a 64-bit syscall makes no sense" >&2
+ exit 1
+ fi
+
+ if [ -z "$compat" ]; then
+ if [ -n "$entry" ]; then
+ syscall_macro "$abi" "$nr" "$entry"
+ fi
+ else
+ echo "#ifdef CONFIG_X86_32"
+ if [ -n "$entry" ]; then
+ syscall_macro "$abi" "$nr" "$entry"
+ fi
+ echo "#else"
+ syscall_macro "$abi" "$nr" "$compat"
+ echo "#endif"
+ fi
+}
+
grep '^[0-9]' "$in" | sort -n | (
while read nr abi name entry compat; do
abi=`echo "$abi" | tr '[a-z]' '[A-Z]'`
- if [ -n "$compat" ]; then
- echo "__SYSCALL_${abi}($nr, $entry, $compat)"
- elif [ -n "$entry" ]; then
- echo "__SYSCALL_${abi}($nr, $entry, $entry)"
+ if [ "$abi" == "COMMON" -o "$abi" == "64" ]; then
+ # COMMON is the same as 64, except that we don't expect X32
+ # programs to use it. Our expectation has nothing to do with
+ # any generated code, so treat them the same.
+ emit 64 "$nr" "$entry" "$compat"
+ elif [ "$abi" == "X32" ]; then
+ # X32 is equivalent to 64 on an X32-compatible kernel.
+ echo "#ifdef CONFIG_X86_X32_ABI"
+ emit 64 "$nr" "$entry" "$compat"
+ echo "#endif"
+ elif [ "$abi" == "I386" ]; then
+ emit "$abi" "$nr" "$entry" "$compat"
+ else
+ echo "Unknown abi $abi" >&2
+ exit 1
fi
done
) > "$out"
diff --git a/arch/x86/entry/vdso/vdso2c.h b/arch/x86/entry/vdso/vdso2c.h
index 3f69326ed545..63a03bb91497 100644
--- a/arch/x86/entry/vdso/vdso2c.h
+++ b/arch/x86/entry/vdso/vdso2c.h
@@ -150,16 +150,9 @@ static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
}
fprintf(outfile, "\n};\n\n");
- fprintf(outfile, "static struct page *pages[%lu];\n\n",
- mapping_size / 4096);
-
fprintf(outfile, "const struct vdso_image %s = {\n", name);
fprintf(outfile, "\t.data = raw_data,\n");
fprintf(outfile, "\t.size = %lu,\n", mapping_size);
- fprintf(outfile, "\t.text_mapping = {\n");
- fprintf(outfile, "\t\t.name = \"[vdso]\",\n");
- fprintf(outfile, "\t\t.pages = pages,\n");
- fprintf(outfile, "\t},\n");
if (alt_sec) {
fprintf(outfile, "\t.alt = %lu,\n",
(unsigned long)GET_LE(&alt_sec->sh_offset));
diff --git a/arch/x86/entry/vdso/vdso32-setup.c b/arch/x86/entry/vdso/vdso32-setup.c
index 08a317a9ae4b..7853b53959cd 100644
--- a/arch/x86/entry/vdso/vdso32-setup.c
+++ b/arch/x86/entry/vdso/vdso32-setup.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/mm_types.h>
-#include <asm/cpufeature.h>
#include <asm/processor.h>
#include <asm/vdso.h>
diff --git a/arch/x86/entry/vdso/vdso32/system_call.S b/arch/x86/entry/vdso/vdso32/system_call.S
index 3a1d9297074b..0109ac6cb79c 100644
--- a/arch/x86/entry/vdso/vdso32/system_call.S
+++ b/arch/x86/entry/vdso/vdso32/system_call.S
@@ -3,7 +3,7 @@
*/
#include <asm/dwarf2.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
#include <asm/alternative-asm.h>
/*
diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index b8f69e264ac4..10f704584922 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
@@ -20,6 +20,7 @@
#include <asm/page.h>
#include <asm/hpet.h>
#include <asm/desc.h>
+#include <asm/cpufeature.h>
#if defined(CONFIG_X86_64)
unsigned int __read_mostly vdso64_enabled = 1;
@@ -27,13 +28,7 @@ unsigned int __read_mostly vdso64_enabled = 1;
void __init init_vdso_image(const struct vdso_image *image)
{
- int i;
- int npages = (image->size) / PAGE_SIZE;
-
BUG_ON(image->size % PAGE_SIZE != 0);
- for (i = 0; i < npages; i++)
- image->text_mapping.pages[i] =
- virt_to_page(image->data + i*PAGE_SIZE);
apply_alternatives((struct alt_instr *)(image->data + image->alt),
(struct alt_instr *)(image->data + image->alt +
@@ -90,18 +85,87 @@ static unsigned long vdso_addr(unsigned long start, unsigned len)
#endif
}
+static int vdso_fault(const struct vm_special_mapping *sm,
+ struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ const struct vdso_image *image = vma->vm_mm->context.vdso_image;
+
+ if (!image || (vmf->pgoff << PAGE_SHIFT) >= image->size)
+ return VM_FAULT_SIGBUS;
+
+ vmf->page = virt_to_page(image->data + (vmf->pgoff << PAGE_SHIFT));
+ get_page(vmf->page);
+ return 0;
+}
+
+static const struct vm_special_mapping text_mapping = {
+ .name = "[vdso]",
+ .fault = vdso_fault,
+};
+
+static int vvar_fault(const struct vm_special_mapping *sm,
+ struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ const struct vdso_image *image = vma->vm_mm->context.vdso_image;
+ long sym_offset;
+ int ret = -EFAULT;
+
+ if (!image)
+ return VM_FAULT_SIGBUS;
+
+ sym_offset = (long)(vmf->pgoff << PAGE_SHIFT) +
+ image->sym_vvar_start;
+
+ /*
+ * Sanity check: a symbol offset of zero means that the page
+ * does not exist for this vdso image, not that the page is at
+ * offset zero relative to the text mapping. This should be
+ * impossible here, because sym_offset should only be zero for
+ * the page past the end of the vvar mapping.
+ */
+ if (sym_offset == 0)
+ return VM_FAULT_SIGBUS;
+
+ if (sym_offset == image->sym_vvar_page) {
+ ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address,
+ __pa_symbol(&__vvar_page) >> PAGE_SHIFT);
+ } else if (sym_offset == image->sym_hpet_page) {
+#ifdef CONFIG_HPET_TIMER
+ if (hpet_address && vclock_was_used(VCLOCK_HPET)) {
+ ret = vm_insert_pfn_prot(
+ vma,
+ (unsigned long)vmf->virtual_address,
+ hpet_address >> PAGE_SHIFT,
+ pgprot_noncached(PAGE_READONLY));
+ }
+#endif
+ } else if (sym_offset == image->sym_pvclock_page) {
+ struct pvclock_vsyscall_time_info *pvti =
+ pvclock_pvti_cpu0_va();
+ if (pvti && vclock_was_used(VCLOCK_PVCLOCK)) {
+ ret = vm_insert_pfn(
+ vma,
+ (unsigned long)vmf->virtual_address,
+ __pa(pvti) >> PAGE_SHIFT);
+ }
+ }
+
+ if (ret == 0 || ret == -EBUSY)
+ return VM_FAULT_NOPAGE;
+
+ return VM_FAULT_SIGBUS;
+}
+
static int map_vdso(const struct vdso_image *image, bool calculate_addr)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long addr, text_start;
int ret = 0;
- static struct page *no_pages[] = {NULL};
- static struct vm_special_mapping vvar_mapping = {
+ static const struct vm_special_mapping vvar_mapping = {
.name = "[vvar]",
- .pages = no_pages,
+ .fault = vvar_fault,
};
- struct pvclock_vsyscall_time_info *pvti;
if (calculate_addr) {
addr = vdso_addr(current->mm->start_stack,
@@ -121,6 +185,7 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
text_start = addr - image->sym_vvar_start;
current->mm->context.vdso = (void __user *)text_start;
+ current->mm->context.vdso_image = image;
/*
* MAYWRITE to allow gdb to COW and set breakpoints
@@ -130,7 +195,7 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
image->size,
VM_READ|VM_EXEC|
VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
- &image->text_mapping);
+ &text_mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
@@ -140,7 +205,8 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
vma = _install_special_mapping(mm,
addr,
-image->sym_vvar_start,
- VM_READ|VM_MAYREAD,
+ VM_READ|VM_MAYREAD|VM_IO|VM_DONTDUMP|
+ VM_PFNMAP,
&vvar_mapping);
if (IS_ERR(vma)) {
@@ -148,41 +214,6 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
goto up_fail;
}
- if (image->sym_vvar_page)
- ret = remap_pfn_range(vma,
- text_start + image->sym_vvar_page,
- __pa_symbol(&__vvar_page) >> PAGE_SHIFT,
- PAGE_SIZE,
- PAGE_READONLY);
-
- if (ret)
- goto up_fail;
-
-#ifdef CONFIG_HPET_TIMER
- if (hpet_address && image->sym_hpet_page) {
- ret = io_remap_pfn_range(vma,
- text_start + image->sym_hpet_page,
- hpet_address >> PAGE_SHIFT,
- PAGE_SIZE,
- pgprot_noncached(PAGE_READONLY));
-
- if (ret)
- goto up_fail;
- }
-#endif
-
- pvti = pvclock_pvti_cpu0_va();
- if (pvti && image->sym_pvclock_page) {
- ret = remap_pfn_range(vma,
- text_start + image->sym_pvclock_page,
- __pa(pvti) >> PAGE_SHIFT,
- PAGE_SIZE,
- PAGE_READONLY);
-
- if (ret)
- goto up_fail;
- }
-
up_fail:
if (ret)
current->mm->context.vdso = NULL;
@@ -254,7 +285,7 @@ static void vgetcpu_cpu_init(void *arg)
#ifdef CONFIG_NUMA
node = cpu_to_node(cpu);
#endif
- if (cpu_has(&cpu_data(cpu), X86_FEATURE_RDTSCP))
+ if (static_cpu_has(X86_FEATURE_RDTSCP))
write_rdtscp_aux((node << 12) | cpu);
/*
diff --git a/arch/x86/entry/vsyscall/vsyscall_gtod.c b/arch/x86/entry/vsyscall/vsyscall_gtod.c
index 51e330416995..0fb3a104ac62 100644
--- a/arch/x86/entry/vsyscall/vsyscall_gtod.c
+++ b/arch/x86/entry/vsyscall/vsyscall_gtod.c
@@ -16,6 +16,8 @@
#include <asm/vgtod.h>
#include <asm/vvar.h>
+int vclocks_used __read_mostly;
+
DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data);
void update_vsyscall_tz(void)
@@ -26,12 +28,17 @@ void update_vsyscall_tz(void)
void update_vsyscall(struct timekeeper *tk)
{
+ int vclock_mode = tk->tkr_mono.clock->archdata.vclock_mode;
struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data;
+ /* Mark the new vclock used. */
+ BUILD_BUG_ON(VCLOCK_MAX >= 32);
+ WRITE_ONCE(vclocks_used, READ_ONCE(vclocks_used) | (1 << vclock_mode));
+
gtod_write_begin(vdata);
/* copy vsyscall data */
- vdata->vclock_mode = tk->tkr_mono.clock->archdata.vclock_mode;
+ vdata->vclock_mode = vclock_mode;
vdata->cycle_last = tk->tkr_mono.cycle_last;
vdata->mask = tk->tkr_mono.mask;
vdata->mult = tk->tkr_mono.mult;