summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2021-01-28 15:52:45 +0300
committerArnd Bergmann <arnd@arndb.de>2021-01-28 15:52:47 +0300
commit2a3e487a3e538b3a87d0a4ea71f185437c38e55e (patch)
tree94e83d6bb551179b8c984b4167eb5afdb77f4a6b /arch
parent082153866e6600e37a98d6fa21fbc347fa22f6a1 (diff)
parent177d8f1f7f47fe7c18ceb1d87893890d7e9c95a7 (diff)
downloadlinux-2a3e487a3e538b3a87d0a4ea71f185437c38e55e.tar.xz
Merge tag 'omap-for-v5.11/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.11-rc cycle The recent changes to switch SoCs to boot with ti-sysc interconnect target module driver and genpd caused few regressions: - The omap_prm reset driver needs to clear any reset bits deasserted by the bootloader or kexec boot for the three reset bit cases. Otherwise we can have an oops with accelerators starting to boot with potentially unconfigured MMU for example - Custom kernel configs are not automatically selecting simple-pm-bus driver that we now need to probe interconnects so we need to select it always - We are not passing legacy platform data in auxdata with simple-pm-bus like we do for simple-bus. We need to pass auxdata to simple-pm-bus so it can pass it to of_platform_populate() Then recent RCU changes started causing splats for cpuidle44xx that now need RCU_NONIDLE added to the calls in several places And then we have few device specific fixes: - We need to remove legacy spi-cs-hig for gta04 display to work, and set the gpio to active low - Omap1 specific ohci-omap needs to call gpio_free() - Droid4 needs to use padconf interrupt for the slider as the edge gpio interrupts may be lost for deeper idle states * tag 'omap-for-v5.11/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4 drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled ARM: dts; gta04: SPI panel chip select is active low soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1 ARM: OMAP1: OSK: fix ohci-omap breakage DTS: ARM: gta04: remove legacy spi-cs-high to make display work again Link: https://lore.kernel.org/r/pull-1611818709-243493@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi3
-rw-r--r--arch/arm/boot/dts/omap4-droid4-xt894.dts5
-rw-r--r--arch/arm/mach-omap1/board-osk.c2
-rw-r--r--arch/arm/mach-omap2/Kconfig28
-rw-r--r--arch/arm/mach-omap2/cpuidle44xx.c16
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c1
6 files changed, 31 insertions, 24 deletions
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index c8745bc800f7..7b8c18e6605e 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -114,7 +114,7 @@
gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
/* lcd panel */
@@ -124,7 +124,6 @@
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
- spi-cs-high;
backlight= <&backlight>;
label = "lcd";
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 3ea4c5b9fd31..e833c21f1c01 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -16,8 +16,13 @@
debounce-interval = <10>;
};
+ /*
+ * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead
+ * of the gpio interrupt to avoid lost events in deeper idle states.
+ */
slider {
label = "Keypad Slide";
+ interrupts-extended = <&omap4_pmx_core 0xd6>;
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
linux,input-type = <EV_SW>;
linux,code = <SW_KEYPAD_SLIDE>;
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a720259099ed..0a4c9b0b13b0 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -203,6 +203,8 @@ static int osk_tps_setup(struct i2c_client *client, void *context)
*/
gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+ /* Free the GPIO again as the driver will request it */
+ gpio_free(OSK_TPS_GPIO_USB_PWR_EN);
/* Set GPIO 2 high so LED D3 is off by default */
tps65010_set_gpio_out_value(GPIO2, HIGH);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4a59c169a113..4178c0ee46eb 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,11 +17,10 @@ config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARM_CPU_SUSPEND if PM
+ select ARM_CPU_SUSPEND
select OMAP_HWMOD
select OMAP_INTERCONNECT
- select PM_OPP if PM
- select PM if CPU_IDLE
+ select PM_OPP
select SOC_HAS_OMAP2_SDRC
select ARM_ERRATA_430973
@@ -30,7 +29,7 @@ config ARCH_OMAP4
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
- select ARM_CPU_SUSPEND if PM
+ select ARM_CPU_SUSPEND
select ARM_ERRATA_720789
select ARM_GIC
select HAVE_ARM_SCU if SMP
@@ -40,7 +39,7 @@ config ARCH_OMAP4
select OMAP_INTERCONNECT_BARRIER
select PL310_ERRATA_588369 if CACHE_L2X0
select PL310_ERRATA_727915 if CACHE_L2X0
- select PM_OPP if PM
+ select PM_OPP
select PM if CPU_IDLE
select ARM_ERRATA_754322
select ARM_ERRATA_775420
@@ -50,7 +49,7 @@ config SOC_OMAP5
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARM_CPU_SUSPEND if PM
+ select ARM_CPU_SUSPEND
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
@@ -58,14 +57,14 @@ config SOC_OMAP5
select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
- select PM_OPP if PM
+ select PM_OPP
select ZONE_DMA if ARM_LPAE
config SOC_AM33XX
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARM_CPU_SUSPEND if PM
+ select ARM_CPU_SUSPEND
config SOC_AM43XX
bool "TI AM43x"
@@ -79,13 +78,13 @@ config SOC_AM43XX
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select OMAP_INTERCONNECT
- select ARM_CPU_SUSPEND if PM
+ select ARM_CPU_SUSPEND
config SOC_DRA7XX
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARM_CPU_SUSPEND if PM
+ select ARM_CPU_SUSPEND
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
@@ -94,7 +93,7 @@ config SOC_DRA7XX
select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
- select PM_OPP if PM
+ select PM_OPP
select ZONE_DMA if ARM_LPAE
select PINCTRL_TI_IODELAY if OF && PINCTRL
@@ -112,9 +111,11 @@ config ARCH_OMAP2PLUS
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
- select PM_GENERIC_DOMAINS if PM
- select PM_GENERIC_DOMAINS_OF if PM
+ select PM
+ select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS_OF
select RESET_CONTROLLER
+ select SIMPLE_PM_BUS
select SOC_BUS
select TI_SYSC
select OMAP_IRQCHIP
@@ -140,7 +141,6 @@ config ARCH_OMAP2PLUS_TYPICAL
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if CPU_V7
- select PM
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index c8d317fafe2e..de37027ad758 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
(cx->mpu_logic_state == PWRDM_POWER_OFF);
/* Enter broadcast mode for periodic timers */
- tick_broadcast_enable();
+ RCU_NONIDLE(tick_broadcast_enable());
/* Enter broadcast mode for one-shot timers */
- tick_broadcast_enter();
+ RCU_NONIDLE(tick_broadcast_enter());
/*
* Call idle CPU PM enter notifier chain so that
@@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
if (dev->cpu == 0) {
pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
- omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+ RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
/*
* Call idle CPU cluster PM enter notifier chain
@@ -178,7 +178,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
index = 0;
cx = state_ptr + index;
pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
- omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+ RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
mpuss_can_lose_context = 0;
}
}
@@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
mpuss_can_lose_context)
gic_dist_disable();
- clkdm_deny_idle(cpu_clkdm[1]);
- omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
- clkdm_allow_idle(cpu_clkdm[1]);
+ RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
+ RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
+ RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
mpuss_can_lose_context) {
@@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
cpu_pm_exit();
cpu_pm_out:
- tick_broadcast_exit();
+ RCU_NONIDLE(tick_broadcast_exit());
fail:
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index cd38bf07c094..2e3a10914c40 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -522,6 +522,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
&dra7_ipu1_dsp_iommu_pdata),
#endif
/* Common auxdata */
+ OF_DEV_AUXDATA("simple-pm-bus", 0, NULL, omap_auxdata_lookup),
OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata),