summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-12-12 21:14:52 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2022-12-12 21:14:52 +0300
commit69700db4212ac784130f63a350b1ede3b7184494 (patch)
tree84faf9aa8448a721d91136b1ccc217703837efc5 /arch
parent5910b842c489ec40866182d1b2acf7d20c2bc83f (diff)
parent8b7f4dd73879598ac6876753732e158055d8b671 (diff)
downloadlinux-69700db4212ac784130f63a350b1ede3b7184494.tar.xz
Merge tag 'soc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC code updates from Arnd Bergmann: "This time there are only fairly minor cleanups across the i.MX, ixp4xx, ux500 and renesas platforms. The only notable update is a change to the keystone2 platform to switch switch it over to standard PSCI SMP bringup, which apparently was present in the shipped firmware almost from the start" * tag 'soc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: ixp4xx: Remove unused debug iomap MAINTAINERS: Add DHCOR to the DH electronic i.MX6 board support ARM: ixp4xx: Remove unused static map MAINTAINERS: adjust ARM/INTEL IXP4XX ARM ARCHITECTURE to ixp4xx clean-up ARM: imx3: Remove unneeded #include <linux/pinctrl/machine.h> ARM: mxs: Remove unneeded #include <linux/pinctrl/consumer.h> riscv: Kconfig.socs: Add ARCH_RENESAS kconfig option ARM: ux500: Drop unused register file ARM: ux500: do not directly dereference __iomem arm/mach-ux500: fix repeated words in comments arm64: renesas: Drop selecting GPIOLIB and PINCTRL ARM: shmobile: Drop selecting GPIOLIB and PINCTRL ARM: keystone: Replace platform SMP with PSCI soc: renesas: Kconfig: Explicitly select GPIOLIB and PINCTRL config under SOC_RENESAS
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-imx/mm-imx3.c1
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx-of.c42
-rw-r--r--arch/arm/mach-keystone/Makefile4
-rw-r--r--arch/arm/mach-keystone/keystone.c2
-rw-r--r--arch/arm/mach-keystone/keystone.h5
-rw-r--r--arch/arm/mach-keystone/platsmp.c41
-rw-r--r--arch/arm/mach-keystone/smc.S26
-rw-r--r--arch/arm/mach-mxs/mach-mxs.c1
-rw-r--r--arch/arm/mach-shmobile/Kconfig2
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c1
-rw-r--r--arch/arm/mach-ux500/db8500-regs.h195
-rw-r--r--arch/arm/mach-ux500/platsmp.c2
-rw-r--r--arch/arm/mach-ux500/pm.c4
-rw-r--r--arch/arm64/Kconfig.platforms2
-rw-r--r--arch/riscv/Kconfig.socs5
15 files changed, 7 insertions, 326 deletions
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 28db97289ee8..0788c5cc7f9e 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -12,7 +12,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of_address.h>
-#include <linux/pinctrl/machine.h>
#include <asm/system_misc.h>
#include <asm/hardware/cache-l2x0.h>
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index f543e2adae0c..1b4d84a5b02f 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -2,48 +2,7 @@
/*
* IXP4xx Device Tree boot support
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-/*
- * These are the only fixed phys to virt mappings we ever need
- * we put it right after the UART mapping at 0xffc80000-0xffc81fff
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000
-
-static struct map_desc ixp4xx_of_io_desc[] __initdata = {
- /*
- * This is needed for runtime system configuration checks,
- * such as reading if hardware so-and-so is present. This
- * could eventually be converted into a syscon once all boards
- * are converted to device tree.
- */
- {
- .virtual = IXP4XX_EXP_CFG_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-#ifdef CONFIG_DEBUG_UART_8250
- /* This is needed for LL-debug/earlyprintk/debug-macro.S */
- {
- .virtual = CONFIG_DEBUG_UART_VIRT,
- .pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-#endif
-};
-
-static void __init ixp4xx_of_map_io(void)
-{
- iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
-}
/*
* We handle 4 different SoC families. These compatible strings are enough
@@ -59,6 +18,5 @@ static const char *ixp4xx_of_board_compat[] = {
};
DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
- .map_io = ixp4xx_of_map_io,
.dt_compat = ixp4xx_of_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index 739b38be5696..0c1d54aec60f 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -1,7 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-y := keystone.o smc.o
-
-obj-$(CONFIG_SMP) += platsmp.o
+obj-y := keystone.o
# PM domain driver for Keystone SOCs
obj-$(CONFIG_ARCH_KEYSTONE) += pm_domain.o
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 2c647bdf8d25..aa352c2de313 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -18,7 +18,6 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/smp_plat.h>
#include <asm/memory.h>
#include "memory.h"
@@ -103,7 +102,6 @@ DT_MACHINE_START(KEYSTONE, "Keystone")
#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
.dma_zone_size = SZ_2G,
#endif
- .smp = smp_ops(keystone_smp_ops),
.init_machine = keystone_init,
.dt_compat = keystone_match,
.pv_fixup = keystone_pv_fixup,
diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h
index 438e531cc007..71ff8cd2ee4a 100644
--- a/arch/arm/mach-keystone/keystone.h
+++ b/arch/arm/mach-keystone/keystone.h
@@ -8,13 +8,8 @@
#ifndef __KEYSTONE_H__
#define __KEYSTONE_H__
-#define KEYSTONE_MON_CPU_UP_IDX 0x00
-
#ifndef __ASSEMBLER__
-extern const struct smp_operations keystone_smp_ops;
-extern void secondary_startup(void);
-extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
extern int keystone_pm_runtime_init(void);
#endif /* __ASSEMBLER__ */
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
deleted file mode 100644
index 673fcf3b34b1..000000000000
--- a/arch/arm/mach-keystone/platsmp.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Keystone SOC SMP platform code
- *
- * Copyright 2013 Texas Instruments, Inc.
- * Cyril Chemparathy <cyril@ti.com>
- * Santosh Shilimkar <santosh.shillimkar@ti.com>
- *
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/pgtable.h>
-
-#include <asm/smp_plat.h>
-#include <asm/prom.h>
-#include <asm/tlbflush.h>
-
-#include "keystone.h"
-
-static int keystone_smp_boot_secondary(unsigned int cpu,
- struct task_struct *idle)
-{
- unsigned long start = virt_to_idmap(&secondary_startup);
- int error;
-
- pr_debug("keystone-smp: booting cpu %d, vector %08lx\n",
- cpu, start);
-
- error = keystone_cpu_smc(KEYSTONE_MON_CPU_UP_IDX, cpu, start);
- if (error)
- pr_err("CPU %d bringup failed with %d\n", cpu, error);
-
- return error;
-}
-
-const struct smp_operations keystone_smp_ops __initconst = {
- .smp_boot_secondary = keystone_smp_boot_secondary,
-};
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
deleted file mode 100644
index 21ef75cf5370..000000000000
--- a/arch/arm/mach-keystone/smc.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Keystone Secure APIs
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- */
-
-#include <linux/linkage.h>
-
-/**
- * u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr)
- *
- * Low level CPU monitor API
- * @command: Monitor command.
- * @cpu: CPU Number
- * @addr: Kernel jump address for boot CPU
- *
- * Return: Non zero value on failure
- */
- .arch_extension sec
-ENTRY(keystone_cpu_smc)
- stmfd sp!, {r4-r11, lr}
- smc #0
- ldmfd sp!, {r4-r11, pc}
-ENDPROC(keystone_cpu_smc)
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 1c57ac401649..0129b7c514d7 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -17,7 +17,6 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
-#include <linux/pinctrl/consumer.h>
#include <linux/sys_soc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 37f862f13c8d..8d64cc7edccd 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -3,7 +3,5 @@ menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
depends on ARCH_MULTI_V7
select ARM_GIC
- select GPIOLIB
select NO_IOPORT_MAP
- select PINCTRL
select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index e929aaa744c0..7cc0dd8ed991 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
-#include "db8500-regs.h"
#include "pm_domains.h"
static int __init ux500_l2x0_unlock(void)
diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h
deleted file mode 100644
index 0d47d7171d9b..000000000000
--- a/arch/arm/mach-ux500/db8500-regs.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2010
- */
-
-#ifndef __MACH_DB8500_REGS_H
-#define __MACH_DB8500_REGS_H
-
-/* Base address and bank offsets for ESRAM */
-#define U8500_ESRAM_BASE 0x40000000
-#define U8500_ESRAM_BANK_SIZE 0x00020000
-#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE
-#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/*
- * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
- * reserved for security
- */
-#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000
-
-#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
-
-/* This address fulfills the 256k alignment requirement of the lcla base */
-#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
-
-#define U8500_PER3_BASE 0x80000000
-#define U8500_STM_BASE 0x80100000
-#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000)
-#define U8500_PER2_BASE 0x80110000
-#define U8500_PER1_BASE 0x80120000
-#define U8500_B2R2_BASE 0x80130000
-#define U8500_HSEM_BASE 0x80140000
-#define U8500_PER4_BASE 0x80150000
-#define U8500_TPIU_BASE 0x80190000
-#define U8500_ICN_BASE 0x81000000
-
-#define U8500_BOOT_ROM_BASE 0x90000000
-/* ASIC ID is at 0xbf4 offset within this region */
-#define U8500_ASIC_ID_BASE 0x9001D000
-
-#define U8500_PER6_BASE 0xa03c0000
-#define U8500_PER7_BASE 0xa03d0000
-#define U8500_PER5_BASE 0xa03e0000
-
-#define U8500_SVA_BASE 0xa0100000
-#define U8500_SIA_BASE 0xa0200000
-
-#define U8500_SGA_BASE 0xa0300000
-#define U8500_MCDE_BASE 0xa0350000
-#define U8500_DMA_BASE 0x801C0000 /* v1 */
-
-#define U8500_SBAG_BASE 0xa0390000
-
-#define U8500_SCU_BASE 0xa0410000
-#define U8500_GIC_CPU_BASE 0xa0410100
-#define U8500_TWD_BASE 0xa0410600
-#define U8500_GIC_DIST_BASE 0xa0411000
-#define U8500_L2CC_BASE 0xa0412000
-
-#define U8500_MODEM_I2C 0xb7e02000
-
-#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000)
-#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000)
-#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000)
-#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)
-
-#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
-
-/* per6 base addresses */
-#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
-#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000)
-#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000)
-#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000)
-#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100)
-#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */
-#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */
-#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */
-#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000)
-#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
-
-/* per5 base addresses */
-#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
-#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
-
-/* per4 base addresses */
-#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000)
-#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000)
-#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000)
-#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000)
-#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000)
-#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
-#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
-#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
-#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000)
-#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
-#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
-#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
-#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
-
-/* per3 base addresses */
-#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
-#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
-
-/* per2 base addresses */
-#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
-#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
-
-/* per1 base addresses */
-#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
-#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000)
-#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
-#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000)
-#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000)
-#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
-
-#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040
-
-#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE
-#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80)
-#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE
-#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80)
-#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100)
-#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180)
-#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE
-#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
-#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE
-
-#define U8500_MCDE_SIZE 0x1000
-#define U8500_DSI_LINK_SIZE 0x1000
-#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE)
-#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK_COUNT 0x3
-
-/* Modem and APE physical addresses */
-#define U8500_MODEM_BASE 0xe000000
-#define U8500_APE_BASE 0x6000000
-
-/* SoC identification number information */
-#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0)
-
-/* Offsets to specific addresses in some IP blocks for DMA */
-#define MSP_TX_RX_REG_OFFSET 0
-#define CRYP1_RX_REG_OFFSET 0x10
-#define CRYP1_TX_REG_OFFSET 0x8
-#define HASH1_TX_REG_OFFSET 0x4
-
-/*
- * Macros to get at IO space when running virtually
- * We dont map all the peripherals, let ioremap do
- * this for us. We map only very basic peripherals here.
- */
-#define U8500_IO_VIRTUAL 0xf0000000
-#define U8500_IO_PHYSICAL 0xa0000000
-/* This is where we map in the ROM to check ASIC IDs */
-#define UX500_VIRT_ROM IOMEM(0xf0000000)
-
-/* This macro is used in assembly, so no cast */
-#define IO_ADDRESS(x) \
- (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
-
-/* typesafe io address */
-#define __io_address(n) IOMEM(IO_ADDRESS(n))
-
-/* Used by some plat-nomadik code */
-#define io_p2v(n) __io_address(n)
-
-#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 415d8ad2a3c1..656b58bd296a 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -20,8 +20,6 @@
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include "db8500-regs.h"
-
/* Magic triggers in backup RAM */
#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c
index ff9c375e4277..dc962d006b08 100644
--- a/arch/arm/mach-ux500/pm.c
+++ b/arch/arm/mach-ux500/pm.c
@@ -16,8 +16,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
-#include "db8500-regs.h"
-
/* ARM WFI Standby signal register */
#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130)
#define PRCM_ARM_WFI_STANDBY_WFI0 0x08
@@ -124,7 +122,7 @@ bool prcmu_pending_irq(void)
}
/*
- * This function checks if the specified cpu is in in WFI. It's usage
+ * This function checks if the specified cpu is in WFI. It's usage
* makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
* function. Of course passing smp_processor_id() to this function will
* always return false...
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 76580b932e44..d1970adf80ab 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -252,8 +252,6 @@ config ARCH_REALTEK
config ARCH_RENESAS
bool "Renesas SoC Platforms"
- select GPIOLIB
- select PINCTRL
help
This enables support for the ARMv8 based Renesas SoCs.
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 69774bb362d6..75fb0390d6bd 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -7,6 +7,11 @@ config SOC_MICROCHIP_POLARFIRE
help
This enables support for Microchip PolarFire SoC platforms.
+config ARCH_RENESAS
+ bool "Renesas RISC-V SoCs"
+ help
+ This enables support for the RISC-V based Renesas SoCs.
+
config SOC_SIFIVE
bool "SiFive SoCs"
select SERIAL_SIFIVE if TTY