summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-02-22 03:38:49 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-22 03:38:49 +0400
commita8f3740feb12928be1aad19659bf3527ea8d6d96 (patch)
treef455479d5b9edd38ed2ca2ab878d2217025960db /arch
parent6c5096e5538b455bc3bea2b02588c380f070d8c6 (diff)
parent89dfe564b5926297ee29b973fe75e25c83c5e615 (diff)
downloadlinux-a8f3740feb12928be1aad19659bf3527ea8d6d96.tar.xz
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions from Arnd Bergmann: "These are device tree conversions for a number of platforms, with the intention of turning code from board files into device tree descriptions. Notable changes are: - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c - nomadik bindings for all devices, removing the board files - bcm2835 bindings for mmc and i2c - tegra bindings for hdmi, keyboard, audio, as well as some updates - at91 bindings for hardware ecc and for devices on RM9200 - mxs bindings for cfa100xx - sunxi support for Miniand Hackberry board" * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits) Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" Revert "sunxi: a13-olinuxino: Add user LED to the device tree" clk: tegra: initialise parent of uart clocks ARM: tegra: remove clock-frequency properties from serial nodes clk: tegra: fix driver to match DT binding clk: tegra: local arrays should be static clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: Implement locking for super clock clk: tegra: fix wrong clock index between se to sata_cold sunxi: a13-olinuxino: Add user LED to the device tree ARM: davinci: da850 DT: add support for machine reboot ARM: davinci: da850: add wdt DT node ARM: davinci: da850: add DT node for I2C0 ARM: at91: at91sam9n12: add DT parameters to enable PMECC ARM: at91: at91sam9x5: add DT parameters to enable PMECC ARM: at91: add EMAC bindings to RM9200 DT ARM: at91: add SSC bindings to RM9200 DT ARM: at91: add MMC bindings to RM9200 DT ARM: at91: Animeo IP: enable watchdog support ARM: nomadik: fix OF compilation regression ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/dts/Makefile5
-rw-r--r--arch/arm/boot/dts/animeo_ip.dts4
-rw-r--r--arch/arm/boot/dts/at91rm9200.dtsi158
-rw-r--r--arch/arm/boot/dts/at91rm9200ek.dts5
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi3
-rw-r--r--arch/arm/boot/dts/at91sam9n12ek.dts5
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9x5cm.dtsi5
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b.dts16
-rw-r--r--arch/arm/boot/dts/bcm2835.dtsi44
-rw-r--r--arch/arm/boot/dts/da850-evm.dts20
-rw-r--r--arch/arm/boot/dts/da850.dtsi70
-rw-r--r--arch/arm/boot/dts/imx28-cfa10037.dts77
-rw-r--r--arch/arm/boot/dts/imx28-cfa10049.dts214
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts1
-rw-r--r--arch/arm/boot/dts/imx28.dtsi10
-rw-r--r--arch/arm/boot/dts/ste-nomadik-s8815.dts30
-rw-r--r--arch/arm/boot/dts/ste-nomadik-stn8815.dtsi256
-rw-r--r--arch/arm/boot/dts/sun4i-a10-hackberry.dts30
-rw-r--r--arch/arm/boot/dts/tegra20-colibri-512.dtsi491
-rw-r--r--arch/arm/boot/dts/tegra20-harmony.dts120
-rw-r--r--arch/arm/boot/dts/tegra20-iris-512.dts89
-rw-r--r--arch/arm/boot/dts/tegra20-paz00.dts22
-rw-r--r--arch/arm/boot/dts/tegra20-seaboard.dts158
-rw-r--r--arch/arm/boot/dts/tegra20-tamonten.dtsi1
-rw-r--r--arch/arm/boot/dts/tegra20-trimslice.dts11
-rw-r--r--arch/arm/boot/dts/tegra20-ventana.dts23
-rw-r--r--arch/arm/boot/dts/tegra20-whistler.dts15
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi67
-rw-r--r--arch/arm/boot/dts/tegra30-beaver.dts373
-rw-r--r--arch/arm/boot/dts/tegra30-cardhu.dtsi15
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi61
-rw-r--r--arch/arm/configs/da8xx_omapl_defconfig1
-rw-r--r--arch/arm/mach-at91/at91rm9200.c2
-rw-r--r--arch/arm/mach-davinci/Kconfig1
-rw-r--r--arch/arm/mach-davinci/da8xx-dt.c9
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c12
-rw-r--r--arch/arm/mach-davinci/include/mach/da8xx.h1
-rw-r--r--arch/arm/mach-mxs/mach-mxs.c30
-rw-r--r--arch/arm/mach-nomadik/Kconfig10
-rw-r--r--arch/arm/mach-nomadik/Makefile6
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c353
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c358
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.h4
-rw-r--r--arch/arm/mach-nomadik/i2c-8815nhk.c88
-rw-r--r--arch/arm/mach-nomadik/include/mach/hardware.h90
-rw-r--r--arch/arm/mach-nomadik/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-nomadik/include/mach/uncompress.h1
49 files changed, 2631 insertions, 742 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c370c869beb..2cb9c35b14e7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -896,10 +896,12 @@ config ARCH_NOMADIK
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
+ select CLKSRC_NOMADIK_MTU
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
+ select USE_OF
select PINCTRL
select PINCTRL_STN8815
select SPARSE_IRQ
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 042f2111485b..411ab1614a0e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -96,11 +96,13 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-apf28dev.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
+ imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \
@@ -135,8 +137,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+ sun4i-a10-hackberry.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
@@ -145,6 +149,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
+ tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 74d92cd29d87..5160210f74da 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -78,6 +78,10 @@
bus-width = <4>;
};
};
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 222047f1ece9..b0268a5f4b4e 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -29,6 +29,9 @@
gpio3 = &pioD;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ ssc2 = &ssc2;
};
cpus {
cpu@0 {
@@ -88,6 +91,52 @@
interrupts = <20 4 0 21 4 0 22 4 0>;
};
+ mmc0: mmc@fffb4000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffb4000 0x4000>;
+ interrupts = <10 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssc0: ssc@fffd0000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffd0000 0x4000>;
+ interrupts = <14 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disable";
+ };
+
+ ssc1: ssc@fffd4000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffd4000 0x4000>;
+ interrupts = <15 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ status = "disable";
+ };
+
+ ssc2: ssc@fffd8000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffd8000 0x4000>;
+ interrupts = <16 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+ status = "disable";
+ };
+
+ macb0: ethernet@fffbc000 {
+ compatible = "cdns,at91rm9200-emac", "cdns,emac";
+ reg = <0xfffbc000 0x4000>;
+ interrupts = <24 4 3>;
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
+ status = "disabled";
+ };
+
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
@@ -207,6 +256,115 @@
};
};
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 7 0x1 0x0 /* PA7 periph A */
+ 0 8 0x1 0x0 /* PA8 periph A */
+ 0 9 0x1 0x0 /* PA9 periph A */
+ 0 10 0x1 0x0 /* PA10 periph A */
+ 0 11 0x1 0x0 /* PA11 periph A */
+ 0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0>; /* PA16 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <1 12 0x2 0x0 /* PB12 periph B */
+ 1 13 0x2 0x0 /* PB13 periph B */
+ 1 14 0x2 0x0 /* PB14 periph B */
+ 1 15 0x2 0x0 /* PB15 periph B */
+ 1 16 0x2 0x0 /* PB16 periph B */
+ 1 17 0x2 0x0 /* PB17 periph B */
+ 1 18 0x2 0x0 /* PB18 periph B */
+ 1 19 0x2 0x0>; /* PB19 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <0 27 0x1 0x0>; /* PA27 periph A */
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 28 0x1 0x1 /* PA28 periph A with pullup */
+ 0 29 0x1 0x1>; /* PA29 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <1 3 0x2 0x1 /* PB3 periph B with pullup */
+ 1 4 0x2 0x1 /* PB4 periph B with pullup */
+ 1 5 0x2 0x1>; /* PB5 periph B with pullup */
+ };
+
+ pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 8 0x2 0x1 /* PA8 periph B with pullup */
+ 0 9 0x2 0x1>; /* PA9 periph B with pullup */
+ };
+
+ pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 10 0x2 0x1 /* PA10 periph B with pullup */
+ 0 11 0x2 0x1 /* PA11 periph B with pullup */
+ 0 12 0x2 0x1>; /* PA12 periph B with pullup */
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A */
+ 1 1 0x1 0x0 /* PB1 periph A */
+ 1 2 0x1 0x0>; /* PB2 periph A */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <1 3 0x1 0x0 /* PB3 periph A */
+ 1 4 0x1 0x0 /* PB4 periph A */
+ 1 5 0x1 0x0>; /* PB5 periph A */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <1 6 0x1 0x0 /* PB6 periph A */
+ 1 7 0x1 0x0 /* PB7 periph A */
+ 1 8 0x1 0x0>; /* PB8 periph A */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <1 9 0x1 0x0 /* PB9 periph A */
+ 1 10 0x1 0x0 /* PB10 periph A */
+ 1 11 0x1 0x0>; /* PB11 periph A */
+ };
+ };
+
+ ssc2 {
+ pinctrl_ssc2_tx: ssc2_tx-0 {
+ atmel,pins =
+ <1 12 0x1 0x0 /* PB12 periph A */
+ 1 13 0x1 0x0 /* PB13 periph A */
+ 1 14 0x1 0x0>; /* PB14 periph A */
+ };
+
+ pinctrl_ssc2_rx: ssc2_rx-0 {
+ atmel,pins =
+ <1 15 0x1 0x0 /* PB15 periph A */
+ 1 16 0x1 0x0 /* PB16 periph A */
+ 1 17 0x1 0x0>; /* PB17 periph A */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 8aa48931e0a2..e586d85f8e23 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -44,6 +44,11 @@
status = "okay";
};
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
usb1: gadget@fffb0000 {
atmel,vbus-gpio = <&pioD 4 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 4801717566dd..7750f98dd764 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -382,8 +382,9 @@
reg = < 0x40000000 0x10000000
0xffffe000 0x00000600
0xffffe600 0x00000200
- 0x00100000 0x00100000
+ 0x00108000 0x00018000
>;
+ atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 0376bf4fd66b..d400f8de4387 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -71,7 +71,10 @@
nand0: nand@40000000 {
nand-bus-width = <8>;
- nand-ecc-mode = "soft";
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <2>;
+ atmel,pmecc-sector-size = <512>;
nand-on-flash-bbt;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index d112c3af8ce2..aa98e641931f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -512,7 +512,11 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000
+ 0xffffe000 0x600 /* PMECC Registers */
+ 0xffffe600 0x200 /* PMECC Error Location Registers */
+ 0x00108000 0x18000 /* PMECC looup table in ROM code */
>;
+ atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 31e7be23703d..4027ac7e4502 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -26,7 +26,10 @@
ahb {
nand0: nand@40000000 {
nand-bus-width = <8>;
- nand-ecc-mode = "soft";
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc; /* Enable PMECC */
+ atmel,pmecc-cap = <2>;
+ atmel,pmecc-sector-size = <512>;
nand-on-flash-bbt;
status = "okay";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 9b72054a0bc0..aafda174a605 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -1,5 +1,4 @@
/dts-v1/;
-/memreserve/ 0x0c000000 0x04000000;
/include/ "bcm2835.dtsi"
/ {
@@ -25,3 +24,18 @@
brcm,function = <7>; /* alt3 */
};
};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&sdhci {
+ status = "okay";
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 8917550fd1bb..4bf2a8774aa7 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -63,5 +63,49 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ i2c0: i2c@20205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20804000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e804000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ status = "disabled";
+ };
+
+ sdhci: sdhci {
+ compatible = "brcm,bcm2835-sdhci";
+ reg = <0x7e300000 0x100>;
+ interrupts = <2 30>;
+ clocks = <&clk_mmc>;
+ status = "disabled";
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk_mmc: mmc {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ clk_i2c: i2c {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <150000000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 37dc5a3243b8..f712fb607a42 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,6 +15,9 @@
model = "DA850/AM1808/OMAP-L138 EVM";
soc {
+ pmx_core: pinmux@1c14120 {
+ status = "okay";
+ };
serial0: serial@1c42000 {
status = "okay";
};
@@ -24,5 +27,22 @@
serial2: serial@1d0d000 {
status = "okay";
};
+ rtc0: rtc@1c23000 {
+ status = "okay";
+ };
+ i2c0: i2c@1c22000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ };
+ wdt: wdt@1c21000 {
+ status = "okay";
+ };
+ };
+ nand_cs3@62000000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_cs3_pins>;
};
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 640ab75c20db..3ec1bda64356 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -28,14 +28,47 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x01c00000 0x400000>;
+ interrupt-parent = <&intc>;
+ pmx_core: pinmux@1c14120 {
+ compatible = "pinctrl-single";
+ reg = <0x14120 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ status = "disabled";
+
+ nand_cs3_pins: pinmux_nand_pins {
+ pinctrl-single,bits = <
+ /* EMA_OE, EMA_WE */
+ 0x1c 0x00110000 0x00ff0000
+ /* EMA_CS[4],EMA_CS[3]*/
+ 0x1c 0x00000110 0x00000ff0
+ /*
+ * EMA_D[0], EMA_D[1], EMA_D[2],
+ * EMA_D[3], EMA_D[4], EMA_D[5],
+ * EMA_D[6], EMA_D[7]
+ */
+ 0x24 0x11111111 0xffffffff
+ /* EMA_A[1], EMA_A[2] */
+ 0x30 0x01100000 0x0ff00000
+ >;
+ };
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,bits = <
+ /* I2C0_SDA,I2C0_SCL */
+ 0x10 0x00002200 0x0000ff00
+ >;
+ };
+ };
serial0: serial@1c42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <25>;
- interrupt-parent = <&intc>;
status = "disabled";
};
serial1: serial@1d0c000 {
@@ -44,7 +77,6 @@
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <53>;
- interrupt-parent = <&intc>;
status = "disabled";
};
serial2: serial@1d0d000 {
@@ -53,8 +85,40 @@
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <61>;
- interrupt-parent = <&intc>;
status = "disabled";
};
+ rtc0: rtc@1c23000 {
+ compatible = "ti,da830-rtc";
+ reg = <0x23000 0x1000>;
+ interrupts = <19
+ 19>;
+ status = "disabled";
+ };
+ i2c0: i2c@1c22000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x22000 0x1000>;
+ interrupts = <15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ wdt: wdt@1c21000 {
+ compatible = "ti,davinci-wdt";
+ reg = <0x21000 0x1000>;
+ status = "disabled";
+ };
+ };
+ nand_cs3@62000000 {
+ compatible = "ti,davinci-nand";
+ reg = <0x62000000 0x807ff
+ 0x68000000 0x8000>;
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+ ti,davinci-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ ti,davinci-nand-use-bbt;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
new file mode 100644
index 000000000000..c2ef3a3d655e
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10037 Board";
+ compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10037>;
+
+ hog_pins_cfa10037: hog-10037@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb1: usb@80090000 {
+ vbus-supply = <&reg_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index bdc80a4453dd..a0d3e9f1738e 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -23,69 +23,120 @@
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10049>;
+ pinctrl-1 = <&hog_pins_cfa10049
+ &hog_pins_cfa10049_pullup>;
hog_pins_cfa10049: hog-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+ 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
- spi3_pins_cfa10049: spi3-cfa10049@0 {
+ hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
- 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
- 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
- 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
- 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
- 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */
+ 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+ 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
+ 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+ 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
- fsl,drive-strength = <1>;
+ fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
- };
- ssp3: ssp@80016000 {
- compatible = "fsl,imx28-spi";
- pinctrl-names = "default";
- pinctrl-0 = <&spi3_pins_cfa10049>;
- status = "okay";
+ spi2_pins_cfa10049: spi2-cfa10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
- gpio5: gpio5@0 {
- compatible = "fairchild,74hc595";
- gpio-controller;
- #gpio-cells = <2>;
+ spi3_pins_cfa10049: spi3-cfa10049@0 {
reg = <0>;
- registers-number = <2>;
- spi-max-frequency = <100000>;
+ fsl,pinmux-ids = <
+ 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
+ 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
+ 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
+ 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
+ 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
};
- gpio6: gpio6@1 {
- compatible = "fairchild,74hc595";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <1>;
- registers-number = <4>;
- spi-max-frequency = <100000>;
+ lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
};
- dac0: dh2228@2 {
- compatible = "rohm,dh2228fv";
- reg = <2>;
- spi-max-frequency = <100000>;
+ lcdif_pins_cfa10049: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
};
};
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+ &lcdif_pins_cfa10049>;
+ status = "okay";
+ };
};
apbx@80040000 {
+ pwm: pwm@80064000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&pwm3_pins_b>;
+ status = "okay";
+ };
+
i2c1: i2c@8005a000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
@@ -113,6 +164,19 @@
i2c@3 {
reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 0x2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x20>;
+ };
};
};
@@ -153,4 +217,92 @@
status = "okay";
};
};
+
+ spi2 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_cfa10049>;
+ status = "okay";
+ gpio-sck = <&gpio2 16 0>;
+ gpio-mosi = <&gpio2 17 0>;
+ gpio-miso = <&gpio2 18 0>;
+ cs-gpios = <&gpio3 23 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hx8357: hx8357@0 {
+ compatible = "himax,hx8357b", "himax,hx8357";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+ gpios-reset = <&gpio3 30 0>;
+ im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
+ };
+ };
+
+ spi3 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins_cfa10049>;
+ status = "okay";
+ gpio-sck = <&gpio0 24 0>;
+ gpio-mosi = <&gpio0 28 0>;
+ cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
+ num-chipselects = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio5: gpio5@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+ };
+
+ gpio6: gpio6@1 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <1>;
+ registers-number = <4>;
+ spi-max-frequency = <100000>;
+ };
+
+ dac0: dh2228@2 {
+ compatible = "rohm,dh2228fv";
+ reg = <2>;
+ spi-max-frequency = <100000>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rotary_button {
+ label = "rotary_button";
+ gpios = <&gpio3 26 1>;
+ debounce-interval = <10>;
+ linux,code = <28>;
+ };
+ };
+
+ rotary {
+ compatible = "rotary-encoder";
+ gpios = <&gpio3 24 1>, <&gpio3 25 1>;
+ linux,axis = <1>; /* REL_Y */
+ rotary-encoder,relative-axis;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 3bab6b00c52d..6ce3d17c3a29 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -177,6 +177,7 @@
lradc@80050000 {
status = "okay";
+ fsl,lradc-touchscreen-wires = <4>;
};
duart: serial@80074000 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 13b7053d799e..7ba49662b9bc 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -502,6 +502,16 @@
fsl,pull-up = <0>;
};
+ pwm3_pins_b: pwm3@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
pwm4_pins_a: pwm4@0 {
reg = <0>;
fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
new file mode 100644
index 000000000000..b28fbf3408e3
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -0,0 +1,30 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+
+/dts-v1/;
+/include/ "ste-nomadik-stn8815.dtsi"
+
+/ {
+ model = "Calao Systems USB-S8815";
+ compatible = "calaosystems,usb-s8815";
+
+ chosen {
+ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+ };
+
+ /* Custom board node with GPIO pins to active etc */
+ usb-s8815 {
+ /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
+ ethernet-gpio {
+ gpios = <&gpio3 19 0x1>;
+ interrupts = <19 0x1>;
+ interrupt-parent = <&gpio3>;
+ };
+ /* This will bias the MMC/SD card detect line */
+ mmcsd-gpio {
+ gpios = <&gpio3 16 0x1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
new file mode 100644
index 000000000000..4a4aab395141
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -0,0 +1,256 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0x00000000 0x04000000>,
+ <0x08000000 0x04000000>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l210-cache";
+ reg = <0x10210000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <30>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ mtu0 {
+ /* Nomadik system timer */
+ reg = <0x101e2000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <4>;
+ };
+
+ mtu1 {
+ /* Secondary timer */
+ reg = <0x101e3000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <5>;
+ };
+
+ gpio0: gpio@101e4000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e4000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
+ };
+
+ gpio1: gpio@101e5000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e5000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
+ };
+
+ gpio2: gpio@101e6000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e6000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
+ };
+
+ gpio3: gpio@101e7000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e7000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <9>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
+ };
+
+ pinctrl {
+ compatible = "stericsson,nmk-pinctrl-stn8815";
+ };
+
+ /* A NAND flash of 128 MiB */
+ fsmc: flash@40000000 {
+ compatible = "stericsson,fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10100000 0x1000>, /* FSMC Register*/
+ <0x40000000 0x2000>, /* NAND Base DATA */
+ <0x41000000 0x2000>, /* NAND Base ADDR */
+ <0x40800000 0x2000>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+ status = "okay";
+
+ partition@0 {
+ label = "X-Loader(NAND)";
+ reg = <0x0 0x40000>;
+ };
+ partition@40000 {
+ label = "MemInit(NAND)";
+ reg = <0x40000 0x40000>;
+ };
+ partition@80000 {
+ label = "BootLoader(NAND)";
+ reg = <0x80000 0x200000>;
+ };
+ partition@280000 {
+ label = "Kernel zImage(NAND)";
+ reg = <0x280000 0x300000>;
+ };
+ partition@580000 {
+ label = "Root Filesystem(NAND)";
+ reg = <0x580000 0x1600000>;
+ };
+ partition@1b80000 {
+ label = "User Filesystem(NAND)";
+ reg = <0x1b80000 0x6480000>;
+ };
+ };
+
+ external-bus@34000000 {
+ compatible = "simple-bus";
+ reg = <0x34000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x34000000 0x1000000>;
+ ethernet@300 {
+ compatible = "smsc,lan91c111";
+ reg = <0x300 0x0fd00>;
+ };
+ };
+
+ /* I2C0 connected to the STw4811 power management chip */
+ i2c0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpio1 31 0>, /* sda */
+ <&gpio1 30 0>; /* scl */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ stw4811@2d {
+ compatible = "st,stw4811";
+ reg = <0x2d>;
+ };
+ };
+
+ /* I2C1 connected to various sensors */
+ i2c1 {
+ compatible = "i2c-gpio";
+ gpios = <&gpio1 22 0>, /* sda */
+ <&gpio1 21 0>; /* scl */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@2d {
+ compatible = "st,camera";
+ reg = <0x10>;
+ };
+ stw5095@1a {
+ compatible = "st,stw5095";
+ reg = <0x1a>;
+ };
+ lis3lv02dl@1d {
+ compatible = "st,lis3lv02dl";
+ reg = <0x1d>;
+ };
+ };
+
+ /* I2C2 connected to the USB portions of the STw4811 only */
+ i2c2 {
+ compatible = "i2c-gpio";
+ gpios = <&gpio2 10 0>, /* sda */
+ <&gpio2 9 0>; /* scl */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ stw4811@2d {
+ compatible = "st,stw4811-usb";
+ reg = <0x2d>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vica: intc@0x10140000 {
+ compatible = "arm,versatile-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10140000 0x20>;
+ };
+
+ vicb: intc@0x10140020 {
+ compatible = "arm,versatile-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10140020 0x20>;
+ };
+
+ uart0: uart@101fd000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101fd000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <12>;
+ };
+
+ uart1: uart@101fb000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101fb000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <17>;
+ };
+
+ uart2: uart@101f2000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x101f2000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <28>;
+ status = "disabled";
+ };
+
+ rng: rng@101b0000 {
+ compatible = "arm,primecell";
+ reg = <0x101b0000 0x1000>;
+ };
+
+ rtc: rtc@101e8000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x101e8000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <10>;
+ };
+
+ mmcsd: sdi@101f6000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x101f6000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <22>;
+ max-frequency = <48000000>;
+ bus-width = <4>;
+ mmc-cap-mmc-highspeed;
+ mmc-cap-sd-highspeed;
+ cd-gpios = <&gpio3 15 0x1>;
+ cd-inverted;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
new file mode 100644
index 000000000000..f84549ad791e
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+ model = "Miniand Hackberry";
+ compatible = "miniand,hackberry", "allwinner,sun4i-a10";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc {
+ uart0: uart@01c28000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
new file mode 100644
index 000000000000..444162090042
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -0,0 +1,491 @@
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "Toradex Colibri T20 512MB";
+ compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ host1x {
+ hdmi {
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&i2c_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ audio_refclk {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ crt {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ displaya {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+ "ld4", "ld5", "ld6", "ld7", "ld8",
+ "ld9", "ld10", "ld11", "ld12", "ld13",
+ "ld14", "ld15", "ld16", "ld17",
+ "lhs", "lpw0", "lpw2", "lsc0",
+ "lsc1", "lsck", "lsda", "lspi", "lvs";
+ nvidia,function = "displaya";
+ nvidia,tristate = <1>;
+ };
+ gpio_dte {
+ nvidia,pins = "dte";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ gpio_gmi {
+ nvidia,pins = "ata", "atc", "atd", "ate",
+ "dap1", "dap2", "dap4", "gpu", "irrx",
+ "irtx", "spia", "spib", "spic";
+ nvidia,function = "gmi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ gpio_pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ gpio_uac {
+ nvidia,pins = "uac";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ hdint {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <1>;
+ };
+ i2c1 {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ i2c3 {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ i2cddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ };
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ irda {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ nand {
+ nvidia,pins = "kbca", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "nand";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ owc {
+ nvidia,pins = "owc";
+ nvidia,function = "owr";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ nvidia,tristate = <0>;
+ };
+ pwm {
+ nvidia,pins = "sdb", "sdc", "sdd";
+ nvidia,function = "pwm";
+ nvidia,tristate = <1>;
+ };
+ sdio4 {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ spi1 {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ spi4 {
+ nvidia,pins = "slxa", "slxc", "slxd", "slxk";
+ nvidia,function = "spi4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ uarta {
+ nvidia,pins = "sdio1";
+ nvidia,function = "uarta";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ uartd {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ ulpi {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ ulpi_refclk {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ usb_gpio {
+ nvidia,pins = "spig", "spih";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ vi {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd";
+ nvidia,function = "vi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ vi_sc {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ };
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ };
+
+ i2c_ddc: i2c@7000c400 {
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ clock-frequency = <400000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1275000>;
+ regulator-max-microvolt = <1275000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ hdmi_vdd_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ hdmi_pll_reg: regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ temperature-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+ };
+
+ memory-controller@7000f400 {
+ emc-table@83250 {
+ reg = <83250>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <83250>;
+ nvidia,emc-registers = <0x00000005 0x00000011
+ 0x00000004 0x00000002 0x00000004 0x00000004
+ 0x00000001 0x0000000a 0x00000002 0x00000002
+ 0x00000001 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x0000025f
+ 0x00000000 0x00000003 0x00000003 0x00000002
+ 0x00000002 0x00000001 0x00000008 0x000000c8
+ 0x00000003 0x00000005 0x00000003 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x00520006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ emc-table@133200 {
+ reg = <133200>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <133200>;
+ nvidia,emc-registers = <0x00000008 0x00000019
+ 0x00000006 0x00000002 0x00000004 0x00000004
+ 0x00000001 0x0000000a 0x00000002 0x00000002
+ 0x00000002 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x0000039f
+ 0x00000000 0x00000003 0x00000003 0x00000002
+ 0x00000002 0x00000001 0x00000008 0x000000c8
+ 0x00000003 0x00000007 0x00000003 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x00510006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ emc-table@166500 {
+ reg = <166500>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <166500>;
+ nvidia,emc-registers = <0x0000000a 0x00000021
+ 0x00000008 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000a 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x000004df
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x00000009 0x000000c8
+ 0x00000003 0x00000009 0x00000004 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x004f0006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ emc-table@333000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <333000>;
+ nvidia,emc-registers = <0x00000014 0x00000041
+ 0x0000000f 0x00000005 0x00000004 0x00000005
+ 0x00000003 0x0000000a 0x00000005 0x00000005
+ 0x00000004 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x000009ff
+ 0x00000000 0x00000003 0x00000003 0x00000005
+ 0x00000005 0x00000001 0x0000000e 0x000000c8
+ 0x00000003 0x00000011 0x00000006 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x00380006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ };
+
+ ac97: ac97 {
+ status = "okay";
+ nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+ nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */
+ };
+
+ usb@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ };
+
+ sdhci@c8000600 {
+ cd-gpios = <&gpio 23 0>; /* gpio PC7 */
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+ "nvidia,tegra-audio-wm9712";
+ nvidia,model = "Colibri T20 AC97 Audio";
+
+ nvidia,audio-routing =
+ "Headphone", "HPOUTL",
+ "Headphone", "HPOUTR",
+ "LineIn", "LINEINL",
+ "LineIn", "LINEINR",
+ "Mic", "MIC1";
+
+ nvidia,ac97-controller = <&ac97>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "internal_usb";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio 217 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 2b4169702c8d..61d027f03617 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -3,7 +3,7 @@
/include/ "tegra20.dtsi"
/ {
- model = "NVIDIA Tegra2 Harmony evaluation board";
+ model = "NVIDIA Tegra20 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
memory {
@@ -252,7 +252,6 @@
serial@70006300 {
status = "okay";
- clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -452,6 +451,123 @@
bus-width = <8>;
};
+ kbc {
+ status = "okay";
+ nvidia,debounce-delay-ms = <2>;
+ nvidia,repeat-delay-ms = <160>;
+ nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+ nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+ linux,keymap = <0x00020011 /* KEY_W */
+ 0x0003001F /* KEY_S */
+ 0x0004001E /* KEY_A */
+ 0x0005002C /* KEY_Z */
+ 0x000701D0 /* KEY_FN */
+ 0x0107008B /* KEY_MENU */
+ 0x02060038 /* KEY_LEFTALT */
+ 0x02070064 /* KEY_RIGHTALT */
+ 0x03000006 /* KEY_5 */
+ 0x03010005 /* KEY_4 */
+ 0x03020013 /* KEY_R */
+ 0x03030012 /* KEY_E */
+ 0x03040021 /* KEY_F */
+ 0x03050020 /* KEY_D */
+ 0x0306002D /* KEY_X */
+ 0x04000008 /* KEY_7 */
+ 0x04010007 /* KEY_6 */
+ 0x04020014 /* KEY_T */
+ 0x04030023 /* KEY_H */
+ 0x04040022 /* KEY_G */
+ 0x0405002F /* KEY_V */
+ 0x0406002E /* KEY_C */
+ 0x04070039 /* KEY_SPACE */
+ 0x0500000A /* KEY_9 */
+ 0x05010009 /* KEY_8 */
+ 0x05020016 /* KEY_U */
+ 0x05030015 /* KEY_Y */
+ 0x05040024 /* KEY_J */
+ 0x05050031 /* KEY_N */
+ 0x05060030 /* KEY_B */
+ 0x0507002B /* KEY_BACKSLASH */
+ 0x0600000C /* KEY_MINUS */
+ 0x0601000B /* KEY_0 */
+ 0x06020018 /* KEY_O */
+ 0x06030017 /* KEY_I */
+ 0x06040026 /* KEY_L */
+ 0x06050025 /* KEY_K */
+ 0x06060033 /* KEY_COMMA */
+ 0x06070032 /* KEY_M */
+ 0x0701000D /* KEY_EQUAL */
+ 0x0702001B /* KEY_RIGHTBRACE */
+ 0x0703001C /* KEY_ENTER */
+ 0x0707008B /* KEY_MENU */
+ 0x0804002A /* KEY_LEFTSHIFT */
+ 0x08050036 /* KEY_RIGHTSHIFT */
+ 0x0905001D /* KEY_LEFTCTRL */
+ 0x09070061 /* KEY_RIGHTCTRL */
+ 0x0B00001A /* KEY_LEFTBRACE */
+ 0x0B010019 /* KEY_P */
+ 0x0B020028 /* KEY_APOSTROPHE */
+ 0x0B030027 /* KEY_SEMICOLON */
+ 0x0B040035 /* KEY_SLASH */
+ 0x0B050034 /* KEY_DOT */
+ 0x0C000044 /* KEY_F10 */
+ 0x0C010043 /* KEY_F9 */
+ 0x0C02000E /* KEY_BACKSPACE */
+ 0x0C030004 /* KEY_3 */
+ 0x0C040003 /* KEY_2 */
+ 0x0C050067 /* KEY_UP */
+ 0x0C0600D2 /* KEY_PRINT */
+ 0x0C070077 /* KEY_PAUSE */
+ 0x0D00006E /* KEY_INSERT */
+ 0x0D01006F /* KEY_DELETE */
+ 0x0D030068 /* KEY_PAGEUP */
+ 0x0D04006D /* KEY_PAGEDOWN */
+ 0x0D05006A /* KEY_RIGHT */
+ 0x0D06006C /* KEY_DOWN */
+ 0x0D070069 /* KEY_LEFT */
+ 0x0E000057 /* KEY_F11 */
+ 0x0E010058 /* KEY_F12 */
+ 0x0E020042 /* KEY_F8 */
+ 0x0E030010 /* KEY_Q */
+ 0x0E04003E /* KEY_F4 */
+ 0x0E05003D /* KEY_F3 */
+ 0x0E060002 /* KEY_1 */
+ 0x0E070041 /* KEY_F7 */
+ 0x0F000001 /* KEY_ESC */
+ 0x0F010029 /* KEY_GRAVE */
+ 0x0F02003F /* KEY_F5 */
+ 0x0F03000F /* KEY_TAB */
+ 0x0F04003B /* KEY_F1 */
+ 0x0F05003C /* KEY_F2 */
+ 0x0F06003A /* KEY_CAPSLOCK */
+ 0x0F070040 /* KEY_F6 */
+ 0x14000047 /* KEY_KP7 */
+ 0x15000049 /* KEY_KP9 */
+ 0x15010048 /* KEY_KP8 */
+ 0x1502004B /* KEY_KP4 */
+ 0x1504004F /* KEY_KP1 */
+ 0x1601004E /* KEY_KPSLASH */
+ 0x1602004D /* KEY_KP6 */
+ 0x1603004C /* KEY_KP5 */
+ 0x16040051 /* KEY_KP3 */
+ 0x16050050 /* KEY_KP2 */
+ 0x16070052 /* KEY_KP0 */
+ 0x1B010037 /* KEY_KPASTERISK */
+ 0x1B03004A /* KEY_KPMINUS */
+ 0x1B04004E /* KEY_KPPLUS */
+ 0x1B050053 /* KEY_KPDOT */
+ 0x1C050073 /* KEY_VOLUMEUP */
+ 0x1D030066 /* KEY_HOME */
+ 0x1D04006B /* KEY_END */
+ 0x1D0500E1 /* KEY_BRIGHTNESSUP */
+ 0x1D060072 /* KEY_VOLUMEDOWN */
+ 0x1D0700E0 /* KEY_BRIGHTNESSDOWN */
+ 0x1E000045 /* KEY_NUMLOCK */
+ 0x1E010046 /* KEY_SCROLLLOCK */
+ 0x1E020071 /* KEY_MUTE */
+ 0x1F0400D6>; /* KEY_QUESTION */
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts
new file mode 100644
index 000000000000..52f1103907d7
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-iris-512.dts
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+/include/ "tegra20-colibri-512.dtsi"
+
+/ {
+ model = "Toradex Colibri T20 512MB on Iris";
+ compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
+
+ host1x {
+ hdmi {
+ status = "okay";
+ };
+ };
+
+ pinmux {
+ state_default: pinmux {
+ hdint {
+ nvidia,tristate = <0>;
+ };
+
+ i2cddc {
+ nvidia,tristate = <0>;
+ };
+
+ sdio4 {
+ nvidia,tristate = <0>;
+ };
+
+ uarta {
+ nvidia,tristate = <0>;
+ };
+
+ uartd {
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+
+ usb@c5000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ serial@70006000 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ status = "okay";
+ };
+
+ i2c_ddc: i2c@7000c400 {
+ status = "okay";
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <4>;
+ vmmc-supply = <&vcc_sd_reg>;
+ vqmmc-supply = <&vcc_sd_reg>;
+ };
+
+ regulators {
+ regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_host_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio 178 0>;
+ };
+
+ vcc_sd_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 11b30db63ff2..54d6fce00a59 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x20000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -232,12 +244,10 @@
serial@70006000 {
status = "okay";
- clock-frequency = <216000000>;
};
serial@70006200 {
status = "okay";
- clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -252,9 +262,9 @@
};
};
- i2c@7000c400 {
+ hdmi_ddc: i2c@7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
nvec {
@@ -369,13 +379,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "+3.3vs_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 607bf0c6bf9c..37b3a57ec0f1 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -291,7 +303,6 @@
serial@70006300 {
status = "okay";
- clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -345,7 +356,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
- i2c@0 {
+ hdmi_ddc: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -463,13 +474,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -604,6 +615,145 @@
};
};
+ kbc {
+ status = "okay";
+ nvidia,debounce-delay-ms = <32>;
+ nvidia,repeat-delay-ms = <160>;
+ nvidia,ghost-filter;
+ nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+ nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+ linux,keymap = <0x00020011 /* KEY_W */
+ 0x0003001F /* KEY_S */
+ 0x0004001E /* KEY_A */
+ 0x0005002C /* KEY_Z */
+ 0x000701d0 /* KEY_FN */
+
+ 0x0107007D /* KEY_LEFTMETA */
+ 0x02060064 /* KEY_RIGHTALT */
+ 0x02070038 /* KEY_LEFTALT */
+
+ 0x03000006 /* KEY_5 */
+ 0x03010005 /* KEY_4 */
+ 0x03020013 /* KEY_R */
+ 0x03030012 /* KEY_E */
+ 0x03040021 /* KEY_F */
+ 0x03050020 /* KEY_D */
+ 0x0306002D /* KEY_X */
+
+ 0x04000008 /* KEY_7 */
+ 0x04010007 /* KEY_6 */
+ 0x04020014 /* KEY_T */
+ 0x04030023 /* KEY_H */
+ 0x04040022 /* KEY_G */
+ 0x0405002F /* KEY_V */
+ 0x0406002E /* KEY_C */
+ 0x04070039 /* KEY_SPACE */
+
+ 0x0500000A /* KEY_9 */
+ 0x05010009 /* KEY_8 */
+ 0x05020016 /* KEY_U */
+ 0x05030015 /* KEY_Y */
+ 0x05040024 /* KEY_J */
+ 0x05050031 /* KEY_N */
+ 0x05060030 /* KEY_B */
+ 0x0507002B /* KEY_BACKSLASH */
+
+ 0x0600000C /* KEY_MINUS */
+ 0x0601000B /* KEY_0 */
+ 0x06020018 /* KEY_O */
+ 0x06030017 /* KEY_I */
+ 0x06040026 /* KEY_L */
+ 0x06050025 /* KEY_K */
+ 0x06060033 /* KEY_COMMA */
+ 0x06070032 /* KEY_M */
+
+ 0x0701000D /* KEY_EQUAL */
+ 0x0702001B /* KEY_RIGHTBRACE */
+ 0x0703001C /* KEY_ENTER */
+ 0x0707008B /* KEY_MENU */
+
+ 0x08040036 /* KEY_RIGHTSHIFT */
+ 0x0805002A /* KEY_LEFTSHIFT */
+
+ 0x09050061 /* KEY_RIGHTCTRL */
+ 0x0907001D /* KEY_LEFTCTRL */
+
+ 0x0B00001A /* KEY_LEFTBRACE */
+ 0x0B010019 /* KEY_P */
+ 0x0B020028 /* KEY_APOSTROPHE */
+ 0x0B030027 /* KEY_SEMICOLON */
+ 0x0B040035 /* KEY_SLASH */
+ 0x0B050034 /* KEY_DOT */
+
+ 0x0C000044 /* KEY_F10 */
+ 0x0C010043 /* KEY_F9 */
+ 0x0C02000E /* KEY_BACKSPACE */
+ 0x0C030004 /* KEY_3 */
+ 0x0C040003 /* KEY_2 */
+ 0x0C050067 /* KEY_UP */
+ 0x0C0600D2 /* KEY_PRINT */
+ 0x0C070077 /* KEY_PAUSE */
+
+ 0x0D00006E /* KEY_INSERT */
+ 0x0D01006F /* KEY_DELETE */
+ 0x0D030068 /* KEY_PAGEUP */
+ 0x0D04006D /* KEY_PAGEDOWN */
+ 0x0D05006A /* KEY_RIGHT */
+ 0x0D06006C /* KEY_DOWN */
+ 0x0D070069 /* KEY_LEFT */
+
+ 0x0E000057 /* KEY_F11 */
+ 0x0E010058 /* KEY_F12 */
+ 0x0E020042 /* KEY_F8 */
+ 0x0E030010 /* KEY_Q */
+ 0x0E04003E /* KEY_F4 */
+ 0x0E05003D /* KEY_F3 */
+ 0x0E060002 /* KEY_1 */
+ 0x0E070041 /* KEY_F7 */
+
+ 0x0F000001 /* KEY_ESC */
+ 0x0F010029 /* KEY_GRAVE */
+ 0x0F02003F /* KEY_F5 */
+ 0x0F03000F /* KEY_TAB */
+ 0x0F04003B /* KEY_F1 */
+ 0x0F05003C /* KEY_F2 */
+ 0x0F06003A /* KEY_CAPSLOCK */
+ 0x0F070040 /* KEY_F6 */
+
+ /* Software Handled Function Keys */
+ 0x14000047 /* KEY_KP7 */
+
+ 0x15000049 /* KEY_KP9 */
+ 0x15010048 /* KEY_KP8 */
+ 0x1502004B /* KEY_KP4 */
+ 0x1504004F /* KEY_KP1 */
+
+ 0x1601004E /* KEY_KPSLASH */
+ 0x1602004D /* KEY_KP6 */
+ 0x1603004C /* KEY_KP5 */
+ 0x16040051 /* KEY_KP3 */
+ 0x16050050 /* KEY_KP2 */
+ 0x16070052 /* KEY_KP0 */
+
+ 0x1B010037 /* KEY_KPASTERISK */
+ 0x1B03004A /* KEY_KPMINUS */
+ 0x1B04004E /* KEY_KPPLUS */
+ 0x1B050053 /* KEY_KPDOT */
+
+ 0x1C050073 /* KEY_VOLUMEUP */
+
+ 0x1D030066 /* KEY_HOME */
+ 0x1D04006B /* KEY_END */
+ 0x1D0500E0 /* KEY_BRIGHTNESSDOWN */
+ 0x1D060072 /* KEY_VOLUMEDOWN */
+ 0x1D0700E1 /* KEY_BRIGHTNESSUP */
+
+ 0x1E000045 /* KEY_NUMLOCK */
+ 0x1E010046 /* KEY_SCROLLLOCK */
+ 0x1E020071 /* KEY_MUTE */
+
+ 0x1F04008A>; /* KEY_HELP */
+ };
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index a239ccdfaa52..4766abae7a72 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -276,7 +276,6 @@
};
serial@70006300 {
- clock-frequency = <216000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index e47cf6a58b6f..5d79e4fc49a6 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -249,6 +249,11 @@
"ld23_22";
nvidia,pull = <1>;
};
+ conf_spif {
+ nvidia,pins = "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ };
};
};
@@ -258,7 +263,6 @@
serial@70006000 {
status = "okay";
- clock-frequency = <216000000>;
};
dvi_ddc: i2c@7000c000 {
@@ -326,6 +330,11 @@
bus-width = <4>;
};
+ poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 191 1>; /* gpio PX7, active low */
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index f6c61d10fd27..425c89000c20 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -3,13 +3,25 @@
/include/ "tegra20.dtsi"
/ {
- model = "NVIDIA Tegra2 Ventana evaluation board";
+ model = "NVIDIA Tegra20 Ventana evaluation board";
compatible = "nvidia,ventana", "nvidia,tegra20";
memory {
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -288,7 +300,6 @@
serial@70006300 {
status = "okay";
- clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -320,7 +331,7 @@
i2c@7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
i2cmux {
@@ -335,7 +346,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
- i2c@0 {
+ hdmi_ddc: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -446,13 +457,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 20d576ecd555..ea57c0f6dcce 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -3,7 +3,7 @@
/include/ "tegra20.dtsi"
/ {
- model = "NVIDIA Tegra2 Whistler evaluation board";
+ model = "NVIDIA Tegra20 Whistler evaluation board";
compatible = "nvidia,whistler", "nvidia,tegra20";
memory {
@@ -255,7 +255,6 @@
serial@70006000 {
status = "okay";
- clock-frequency = <216000000>;
};
hdmi_ddc: i2c@7000c400 {
@@ -520,6 +519,18 @@
bus-width = <8>;
};
+ kbc {
+ status = "okay";
+ nvidia,debounce-delay-ms = <20>;
+ nvidia,repeat-delay-ms = <160>;
+ nvidia,kbc-row-pins = <0 1 2>;
+ nvidia,kbc-col-pins = <16 17>;
+ linux,keymap = <0x00000074 /* KEY_POWER */
+ 0x01000066 /* KEY_HOME */
+ 0x0101009E /* KEY_BACK */
+ 0x0201008B>; /* KEY_MENU */
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 2e7c83c7253b..9a428931d042 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,14 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ serial4 = &uarte;
+ };
+
host1x {
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -112,15 +120,6 @@
interrupts = <1 13 0x304>;
};
- cache-controller@50043000 {
- compatible = "arm,pl310-cache";
- reg = <0x50043000 0x1000>;
- arm,data-latency = <5 5 2>;
- arm,tag-latency = <4 4 2>;
- cache-unified;
- cache-level = <2>;
- };
-
intc: interrupt-controller {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
@@ -129,6 +128,15 @@
#interrupt-cells = <3>;
};
+ cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x50043000 0x1000>;
+ arm,data-latency = <5 5 2>;
+ arm,tag-latency = <4 4 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
timer@60005000 {
compatible = "nvidia,tegra20-timer";
reg = <0x60005000 0x60>;
@@ -199,6 +207,15 @@
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
+
+ tegra_ac97: ac97 {
+ compatible = "nvidia,tegra20-ac97";
+ reg = <0x70002000 0x200>;
+ interrupts = <0 81 0x04>;
+ nvidia,dma-request-selector = <&apbdma 12>;
+ clocks = <&tegra_car 3>;
+ status = "disabled";
+ };
tegra_i2s1: i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
@@ -218,47 +235,59 @@
status = "disabled";
};
- serial@70006000 {
+ /*
+ * There are two serial driver i.e. 8250 based simple serial
+ * driver and APB DMA based serial driver for higher baudrate
+ * and performace. To enable the 8250 based driver, the compatible
+ * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+ * driver, the comptible is "nvidia,tegra20-hsuart".
+ */
+ uarta: serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
+ nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car 6>;
status = "disabled";
};
- serial@70006040 {
+ uartb: serial@70006040 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
+ nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car 96>;
status = "disabled";
};
- serial@70006200 {
+ uartc: serial@70006200 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
+ nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car 55>;
status = "disabled";
};
- serial@70006300 {
+ uartd: serial@70006300 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
+ nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car 65>;
status = "disabled";
};
- serial@70006400 {
+ uarte: serial@70006400 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
+ nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car 66>;
status = "disabled";
};
@@ -375,6 +404,14 @@
status = "disabled";
};
+ kbc {
+ compatible = "nvidia,tegra20-kbc";
+ reg = <0x7000e200 0x100>;
+ interrupts = <0 85 0x04>;
+ clocks = <&tegra_car 36>;
+ status = "disabled";
+ };
+
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
@@ -387,7 +424,7 @@
interrupts = <0 77 0x04>;
};
- gart {
+ iommu {
compatible = "nvidia,tegra20-gart";
reg = <0x7000f024 0x00000018 /* controller registers */
0x58000000 0x02000000>; /* GART aperture */
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
new file mode 100644
index 000000000000..8ff2ff20e4a3
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -0,0 +1,373 @@
+/dts-v1/;
+
+/include/ "tegra30.dtsi"
+
+/ {
+ model = "NVIDIA Tegra30 Beaver evaluation board";
+ compatible = "nvidia,beaver", "nvidia,tegra30";
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ dap2_fs_pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5";
+ nvidia,function = "i2s1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdio3 {
+ nvidia,pins = "drive_sdio3";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <0>;
+ nvidia,pull-down-strength = <46>;
+ nvidia,pull-up-strength = <42>;
+ nvidia,slew-rate-rising = <1>;
+ nvidia,slew-rate-falling = <1>;
+ };
+ };
+ };
+
+ serial@70006000 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ tps62361 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ };
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <0 86 0x4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_5v_in_reg>;
+ vcc2-supply = <&vdd_5v_in_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&vdd_5v_in_reg>;
+ vcc5-supply = <&vdd_5v_in_reg>;
+ vcc6-supply = <&vdd2_reg>;
+ vcc7-supply = <&vdd_5v_in_reg>;
+ vccio-supply = <&vdd_5v_in_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: vdd2 {
+ regulator-name = "vdd_1v5_gen";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "vdd_pexa,vdd_pexb";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "vdd_sata,avdd_plle";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "vddio_sdmmc,avdd_vdac";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spi-flash@1 {
+ compatible = "winbond,w25q32";
+ reg = <1>;
+ spi-max-frequency = <20000000>;
+ };
+ };
+
+ ahub {
+ i2s@70080400 {
+ status = "okay";
+ };
+ };
+
+ pmc {
+ status = "okay";
+ nvidia,invert-interrupt;
+ };
+
+ sdhci@78000000 {
+ status = "okay";
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ bus-width = <4>;
+ };
+
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v_in_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v_in";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ chargepump_5v_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "chargepump_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+ };
+
+ ddr_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 0>; /* PMIC TPS65911 GPIO7 */
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ vdd_5v_sata_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_5v_sata";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 30 0>; /* gpio PD6 */
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ usb1_vbus_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 68 0>; /* GPIO PI4 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ usb3_vbus_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 63 0>; /* GPIO PH7 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ sys_3v3_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "sys_3v3,vdd_3v3_alw";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 0>; /* PMIC TPS65911 GPIO6 */
+ vin-supply = <&vdd_5v_in_reg>;
+ };
+
+ sys_3v3_pexs_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "sys_3v3_pexs";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 95 0>; /* gpio PL7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index bdb2a660f376..17499272a4ef 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -106,12 +106,25 @@
nvidia,slew-rate-rising = <1>;
nvidia,slew-rate-falling = <1>;
};
+ uart3_txd_pw6 {
+ nvidia,pins = "uart3_txd_pw6",
+ "uart3_cts_n_pa1",
+ "uart3_rts_n_pc0",
+ "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
};
};
serial@70006000 {
status = "okay";
- clock-frequency = <408000000>;
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
};
i2c@7000c000 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 2de8b919d78c..767803e1fd55 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,14 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ serial4 = &uarte;
+ };
+
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -113,15 +121,6 @@
interrupts = <1 13 0xf04>;
};
- cache-controller@50043000 {
- compatible = "arm,pl310-cache";
- reg = <0x50043000 0x1000>;
- arm,data-latency = <6 6 2>;
- arm,tag-latency = <5 5 2>;
- cache-unified;
- cache-level = <2>;
- };
-
intc: interrupt-controller {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
@@ -130,6 +129,15 @@
#interrupt-cells = <3>;
};
+ cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x50043000 0x1000>;
+ arm,data-latency = <6 6 2>;
+ arm,tag-latency = <5 5 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
timer@60005000 {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
@@ -191,7 +199,7 @@
};
gpio: gpio {
- compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
+ compatible = "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
interrupts = <0 32 0x04
0 33 0x04
@@ -213,47 +221,60 @@
0x70003000 0x3e4>; /* Mux registers */
};
- serial@70006000 {
+ /*
+ * There are two serial driver i.e. 8250 based simple serial
+ * driver and APB DMA based serial driver for higher baudrate
+ * and performace. To enable the 8250 based driver, the compatible
+ * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
+ * the APB DMA based serial driver, the comptible is
+ * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+ */
+ uarta: serial@70006000 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
+ nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car 6>;
status = "disabled";
};
- serial@70006040 {
+ uartb: serial@70006040 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
+ nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car 160>;
status = "disabled";
};
- serial@70006200 {
+ uartc: serial@70006200 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
+ nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car 55>;
status = "disabled";
};
- serial@70006300 {
+ uartd: serial@70006300 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
+ nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car 65>;
status = "disabled";
};
- serial@70006400 {
+ uarte: serial@70006400 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
+ nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car 66>;
status = "disabled";
};
@@ -392,6 +413,14 @@
status = "disabled";
};
+ kbc {
+ compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
+ reg = <0x7000e200 0x100>;
+ interrupts = <0 85 0x04>;
+ clocks = <&tegra_car 36>;
+ status = "disabled";
+ };
+
pmc {
compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
@@ -406,7 +435,7 @@
interrupts = <0 77 0x04>;
};
- smmu {
+ iommu {
compatible = "nvidia,tegra30-smmu";
reg = <0x7000f010 0x02c
0x7000f1f0 0x010
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 6b36a5ae03c2..9aaad36a1728 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -84,6 +84,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DAVINCI=y
+CONFIG_PINCTRL_SINGLE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_REGULATOR=y
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 7aeb473ee539..9706c000f294 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -210,6 +210,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk),
CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk),
+ CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", &ether_clk),
CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 0153950f6068..a075b3e0c5c7 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -62,6 +62,7 @@ config MACH_DA8XX_DT
bool "Support DA8XX platforms using device tree"
default y
depends on ARCH_DAVINCI_DA8XX
+ select PINCTRL
help
Say y here to include support for TI DaVinci DA850 based using
Flattened Device Tree. More information at Documentation/devicetree
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 9a7c76efc8f8..6b7a0a27fbd1 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -37,11 +37,18 @@ static void __init da8xx_init_irq(void)
of_irq_init(da8xx_irq_match);
}
+struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+ OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
+ {}
+};
+
#ifdef CONFIG_ARCH_DAVINCI_DA850
static void __init da850_init_machine(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ da850_auxdata_lookup, NULL);
da8xx_uart_clk_enable();
}
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index aa402bc160c8..fc50243b1481 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -359,7 +359,7 @@ static struct resource da8xx_watchdog_resources[] = {
},
};
-struct platform_device da8xx_wdt_device = {
+static struct platform_device da8xx_wdt_device = {
.name = "watchdog",
.id = -1,
.num_resources = ARRAY_SIZE(da8xx_watchdog_resources),
@@ -368,7 +368,15 @@ struct platform_device da8xx_wdt_device = {
void da8xx_restart(char mode, const char *cmd)
{
- davinci_watchdog_reset(&da8xx_wdt_device);
+ struct device *dev;
+
+ dev = bus_find_device_by_name(&platform_bus_type, NULL, "watchdog");
+ if (!dev) {
+ pr_err("%s: failed to find watchdog device\n", __func__);
+ return;
+ }
+
+ davinci_watchdog_reset(to_platform_device(dev));
}
int __init da8xx_register_watchdog(void)
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 1b14aea40310..de439b7b9af1 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -110,7 +110,6 @@ extern struct emac_platform_data da8xx_emac_pdata;
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
-extern struct platform_device da8xx_wdt_device;
extern const short da830_emif25_pins[];
extern const short da830_spi0_pins[];
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 5fad7cefe8aa..052186713347 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -119,6 +119,23 @@ static struct fb_videomode apf28dev_video_modes[] = {
},
};
+static struct fb_videomode cfa10049_video_modes[] = {
+ {
+ .name = "Himax HX8357-B",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 480,
+ .pixclock = 108506, /* picosecond (9.216 MHz) */
+ .left_margin = 2,
+ .right_margin = 2,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 15,
+ .vsync_len = 15,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT
+ },
+};
+
static struct mxsfb_platform_data mxsfb_pdata __initdata;
/*
@@ -387,6 +404,17 @@ static void __init cfa10049_init(void)
update_fec_mac_prop(OUI_CRYSTALFONTZ);
}
+static void __init cfa10037_init(void)
+{
+ enable_clk_enet_out();
+ update_fec_mac_prop(OUI_CRYSTALFONTZ);
+
+ mxsfb_pdata.mode_list = cfa10049_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+}
+
static void __init apf28_init(void)
{
enable_clk_enet_out();
@@ -407,6 +435,8 @@ static void __init mxs_machine_init(void)
m28evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
+ else if (of_machine_is_compatible("crystalfontz,cfa10037"))
+ cfa10037_init();
else if (of_machine_is_compatible("crystalfontz,cfa10049"))
cfa10049_init();
else if (of_machine_is_compatible("armadeus,imx28-apf28"))
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 706dc5727bbe..82226a5d60ef 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -4,19 +4,13 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
- select CLKSRC_NOMADIK_MTU
select NOMADIK_8815
+ select I2C
+ select I2C_ALGOBIT
endmenu
config NOMADIK_8815
bool
-config I2C_BITBANG_8815NHK
- tristate "Driver for bit-bang busses found on the 8815 NHK"
- depends on I2C && MACH_NOMADIK_8815NHK
- depends on PINCTRL_NOMADIK
- default y
- select I2C_ALGOBIT
-
endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index a42c9a33d3bf..1071c3b04d1a 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -9,9 +9,3 @@
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
-
-# Specific board support
-obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
-
-# Nomadik extra devices
-obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
deleted file mode 100644
index aaed48d94374..000000000000
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/board-8815nhk.c
- *
- * Copyright (C) STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- * NHK15 board specifc driver definition
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/fsmc.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-#include <mach/irqs.h>
-
-#include "cpu-8815.h"
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK 0x00007fff
-#define SRC_CR_INIT_VAL 0x2aaa8000
-
-#define ALE_OFF 0x1000000
-#define CLE_OFF 0x800000
-
-/* These addresses span 16MB, so use three individual pages */
-static struct resource nhk8815_nand_resources[] = {
- {
- .name = "nand_data",
- .start = 0x40000000,
- .end = 0x40000000 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "nand_addr",
- .start = 0x40000000 + ALE_OFF,
- .end = 0x40000000 +ALE_OFF + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "nand_cmd",
- .start = 0x40000000 + CLE_OFF,
- .end = 0x40000000 + CLE_OFF + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "fsmc_regs",
- .start = NOMADIK_FSMC_BASE,
- .end = NOMADIK_FSMC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-/*
- * These partitions are the same as those used in the 2.6.20 release
- * shipped by the vendor; the first two partitions are mandated
- * by the boot ROM, and the bootloader area is somehow oversized...
- */
-static struct mtd_partition nhk8815_partitions[] = {
- {
- .name = "X-Loader(NAND)",
- .offset = 0,
- .size = SZ_256K,
- }, {
- .name = "MemInit(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- }, {
- .name = "BootLoader(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- }, {
- .name = "Kernel zImage(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 3 * SZ_1M,
- }, {
- .name = "Root Filesystem(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 22 * SZ_1M,
- }, {
- .name = "User Filesystem(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct fsmc_nand_timings nhk8815_nand_timings = {
- .thiz = 0,
- .thold = 0x10,
- .twait = 0x0A,
- .tset = 0,
-};
-
-static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
- .nand_timings = &nhk8815_nand_timings,
- .partitions = nhk8815_partitions,
- .nr_partitions = ARRAY_SIZE(nhk8815_partitions),
- .width = FSMC_NAND_BW8,
-};
-
-static struct platform_device nhk8815_nand_device = {
- .name = "fsmc-nand",
- .id = -1,
- .resource = nhk8815_nand_resources,
- .num_resources = ARRAY_SIZE(nhk8815_nand_resources),
- .dev = {
- .platform_data = &nhk8815_nand_platform_data,
- },
-};
-
-/* These are the partitions for the OneNand device, different from above */
-static struct mtd_partition nhk8815_onenand_partitions[] = {
- {
- .name = "X-Loader(OneNAND)",
- .offset = 0,
- .size = SZ_256K,
- }, {
- .name = "MemInit(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- }, {
- .name = "BootLoader(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M-SZ_256K,
- }, {
- .name = "SysImage(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * SZ_1M,
- }, {
- .name = "Root Filesystem(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 22 * SZ_1M,
- }, {
- .name = "User Filesystem(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct onenand_platform_data nhk8815_onenand_data = {
- .parts = nhk8815_onenand_partitions,
- .nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions),
-};
-
-static struct resource nhk8815_onenand_resource[] = {
- {
- .start = 0x30000000,
- .end = 0x30000000 + SZ_128K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device nhk8815_onenand_device = {
- .name = "onenand-flash",
- .id = -1,
- .dev = {
- .platform_data = &nhk8815_onenand_data,
- },
- .resource = nhk8815_onenand_resource,
- .num_resources = ARRAY_SIZE(nhk8815_onenand_resource),
-};
-
-/* bus control reg. and bus timing reg. for CS0..CS3 */
-#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
-#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)
-
-static void __init nhk8815_onenand_init(void)
-{
-#ifdef CONFIG_MTD_ONENAND
- /* Set up SMCS0 for OneNand */
- writel(0x000030db, FSMC_BCR(0));
- writel(0x02100551, FSMC_BTR(0));
-#endif
-}
-
-static struct mmci_platform_data mmcsd_plat_data = {
- .ocr_mask = MMC_VDD_29_30,
- .f_max = 48000000,
- .gpio_wp = -1,
- .gpio_cd = 111,
- .cd_invert = true,
- .capabilities = MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
-};
-
-static int __init nhk8815_mmcsd_init(void)
-{
- int ret;
-
- ret = gpio_request(112, "card detect bias");
- if (ret)
- return ret;
- gpio_direction_output(112, 0);
- amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
- return 0;
-}
-module_init(nhk8815_mmcsd_init);
-
-static struct resource nhk8815_eth_resources[] = {
- {
- .name = "smc91x-regs",
- .start = 0x34000000 + 0x300,
- .end = 0x34000000 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = NOMADIK_GPIO_TO_IRQ(115),
- .end = NOMADIK_GPIO_TO_IRQ(115),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
- }
-};
-
-static struct platform_device nhk8815_eth_device = {
- .name = "smc91x",
- .resource = nhk8815_eth_resources,
- .num_resources = ARRAY_SIZE(nhk8815_eth_resources),
-};
-
-static int __init nhk8815_eth_init(void)
-{
- int gpio_nr = 115; /* hardwired in the board */
- int err;
-
- err = gpio_request(gpio_nr, "eth_irq");
- if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
- if (!err) err = gpio_direction_input(gpio_nr);
- if (err)
- pr_err("Error %i in %s\n", err, __func__);
- return err;
-}
-device_initcall(nhk8815_eth_init);
-
-static struct platform_device *nhk8815_platform_devices[] __initdata = {
- &nhk8815_nand_device,
- &nhk8815_onenand_device,
- &nhk8815_eth_device,
- /* will add more devices */
-};
-
-static void __init nomadik_timer_init(void)
-{
- u32 src_cr;
-
- /* Configure timer sources in "system reset controller" ctrl reg */
- src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
- src_cr &= SRC_CR_INIT_MASK;
- src_cr |= SRC_CR_INIT_VAL;
- writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
- nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
-}
-
-static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
- {
- I2C_BOARD_INFO("stw4811", 0x2d),
- },
-};
-
-static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
- {
- I2C_BOARD_INFO("camera", 0x10),
- },
- {
- I2C_BOARD_INFO("stw5095", 0x1a),
- },
- {
- I2C_BOARD_INFO("lis3lv02dl", 0x1d),
- },
-};
-
-static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
- {
- I2C_BOARD_INFO("stw4811-usb", 0x2d),
- },
-};
-
-static unsigned long out_low[] = { PIN_OUTPUT_LOW };
-static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
-static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
-static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
-
-static struct pinctrl_map __initdata nhk8815_pinmap[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
- PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
- /* Hog in MMC/SD card mux */
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
- /* MCCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
- /* MCCMD */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
- /* MCCMDDIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
- /* MCDAT3-0 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
- /* MCDAT0DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
- /* MCDAT31DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
- /* MCMSFBCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
- /* CD input GPIO */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
- /* CD bias drive */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
-};
-
-static void __init nhk8815_platform_init(void)
-{
- pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
- cpu8815_platform_init();
- nhk8815_onenand_init();
- platform_add_devices(nhk8815_platform_devices,
- ARRAY_SIZE(nhk8815_platform_devices));
-
- amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
- amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);
-
- i2c_register_board_info(0, nhk8815_i2c0_devices,
- ARRAY_SIZE(nhk8815_i2c0_devices));
- i2c_register_board_info(1, nhk8815_i2c1_devices,
- ARRAY_SIZE(nhk8815_i2c1_devices));
- i2c_register_board_info(2, nhk8815_i2c2_devices,
- ARRAY_SIZE(nhk8815_i2c2_devices));
-}
-
-MACHINE_START(NOMADIK, "NHK8815")
- /* Maintainer: ST MicroElectronics */
- .atag_offset = 0x100,
- .map_io = cpu8815_map_io,
- .init_irq = cpu8815_init_irq,
- .init_time = nomadik_timer_init,
- .init_machine = nhk8815_platform_init,
- .restart = cpu8815_restart,
-MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 351404673f6c..21c1aa512640 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,138 +25,308 @@
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
-#include <linux/irqchip/arm-vic.h>
+#include <linux/irqchip.h>
#include <linux/platform_data/clk-nomadik.h>
#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/mtd/fsmc.h>
+#include <linux/gpio.h>
+#include <linux/amba/mmci.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
-#include "cpu-8815.h"
+/*
+ * These are the only hard-coded address offsets we still have to use.
+ */
+#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
+#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
+#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
+#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
+#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
+#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
+#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
+#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
+#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
+#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
+#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
+#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
+#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
+#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
+#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
+#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
+#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
+#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
+#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
+#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
+#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
+#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
+#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
+#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
+#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
+#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
+#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
+#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
+#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
+#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
+#define NOMADIK_UART1_VBASE 0xF01FB000
-/* The 8815 has 4 GPIO blocks, let's register them immediately */
-static resource_size_t __initdata cpu8815_gpio_base[] = {
- NOMADIK_GPIO0_BASE,
- NOMADIK_GPIO1_BASE,
- NOMADIK_GPIO2_BASE,
- NOMADIK_GPIO3_BASE,
+static unsigned long out_low[] = { PIN_OUTPUT_LOW };
+static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
+static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
+static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
+
+static struct pinctrl_map __initdata nhk8815_pinmap[] = {
+ PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
+ /* Hog in MMC/SD card mux */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
+ /* MCCLK */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
+ /* MCCMD */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
+ /* MCCMDDIR */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
+ /* MCDAT3-0 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
+ /* MCDAT0DIR */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
+ /* MCDAT31DIR */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
+ /* MCMSFBCLK */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
+ /* CD input GPIO */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
+ /* CD bias drive */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
+ /* I2C0 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup),
+ /* I2C1 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup),
+ /* I2C2 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
};
-static struct platform_device *
-cpu8815_add_gpio(int id, resource_size_t addr, int irq,
- struct nmk_gpio_platform_data *pdata)
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc cpu8815_io_desc[] __initdata = {
+ {
+ .virtual = NOMADIK_UART1_VBASE,
+ .pfn = __phys_to_pfn(NOMADIK_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init cpu8815_map_io(void)
{
- struct resource resources[] = {
- {
- .start = addr,
- .end = addr + 127,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- }
- };
-
- return platform_device_register_resndata(NULL, "gpio", id,
- resources, ARRAY_SIZE(resources),
- pdata, sizeof(*pdata));
+ iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc));
}
-void cpu8815_add_gpios(resource_size_t *base, int num, int irq,
- struct nmk_gpio_platform_data *pdata)
+static void cpu8815_restart(char mode, const char *cmd)
{
- int first = 0;
- int i;
+ void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K);
- for (i = 0; i < num; i++, first += 32, irq++) {
- pdata->first_gpio = first;
- pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
- pdata->num_gpio = 32;
+ /* FIXME: use egpio when implemented */
- cpu8815_add_gpio(i, base[i], irq, pdata);
- }
+ /* Write anything to Reset status register */
+ writel(1, srcbase + 0x18);
}
-static inline void
-cpu8815_add_pinctrl(struct device *parent, const char *name)
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK 0x00007fff
+#define SRC_CR_INIT_VAL 0x2aaa8000
+
+static void __init cpu8815_timer_init_of(void)
{
- struct platform_device_info pdevinfo = {
- .parent = parent,
- .name = name,
- .id = -1,
- };
+ struct device_node *mtu;
+ void __iomem *base;
+ int irq;
+ u32 src_cr;
+
+ /* We need this to be up now */
+ nomadik_clk_init();
+
+ mtu = of_find_node_by_path("/mtu0");
+ if (!mtu)
+ return;
+ base = of_iomap(mtu, 0);
+ if (WARN_ON(!base))
+ return;
+ irq = irq_of_parse_and_map(mtu, 0);
- platform_device_register_full(&pdevinfo);
+ pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
+
+ /* Configure timer sources in "system reset controller" ctrl reg */
+ src_cr = readl(base);
+ src_cr &= SRC_CR_INIT_MASK;
+ src_cr |= SRC_CR_INIT_VAL;
+ writel(src_cr, base);
+
+ nmdk_timer_init(base, irq);
}
-static int __init cpu8815_init(void)
+static struct fsmc_nand_timings cpu8815_nand_timings = {
+ .thiz = 0,
+ .thold = 0x10,
+ .twait = 0x0A,
+ .tset = 0,
+};
+
+static struct fsmc_nand_platform_data cpu8815_nand_data = {
+ .nand_timings = &cpu8815_nand_timings,
+};
+
+/*
+ * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
+ * to simply request an IRQ passed as a resource. So the GPIO pin needs
+ * to be requested by this hog and set as input.
+ */
+static int __init cpu8815_eth_init(void)
{
- struct nmk_gpio_platform_data pdata = {
- /* No custom data yet */
- };
-
- cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
- IRQ_GPIO0, &pdata);
- cpu8815_add_pinctrl(NULL, "pinctrl-stn8815");
- amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
- amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
+ struct device_node *eth;
+ int gpio, irq, err;
+
+ eth = of_find_node_by_path("/usb-s8815/ethernet-gpio");
+ if (!eth) {
+ pr_info("could not find any ethernet GPIO\n");
+ return 0;
+ }
+ gpio = of_get_gpio(eth, 0);
+ err = gpio_request(gpio, "eth_irq");
+ if (err) {
+ pr_info("failed to request ethernet GPIO\n");
+ return -ENODEV;
+ }
+ err = gpio_direction_input(gpio);
+ if (err) {
+ pr_info("failed to set ethernet GPIO as input\n");
+ return -ENODEV;
+ }
+ irq = gpio_to_irq(gpio);
+ pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq);
return 0;
}
-arch_initcall(cpu8815_init);
+device_initcall(cpu8815_eth_init);
-/* All SoC devices live in the same area (see hardware.h) */
-static struct map_desc nomadik_io_desc[] __initdata = {
- {
- .virtual = NOMADIK_IO_VIRTUAL,
- .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL),
- .length = NOMADIK_IO_SIZE,
- .type = MT_DEVICE,
- }
- /* static ram and secured ram may be added later */
+/*
+ * TODO:
+ * cannot be set from device tree, convert to a proper DT
+ * binding.
+ */
+static struct mmci_platform_data mmcsd_plat_data = {
+ .ocr_mask = MMC_VDD_29_30,
};
-void __init cpu8815_map_io(void)
+/*
+ * This GPIO pin turns on a line that is used to detect card insertion
+ * on this board.
+ */
+static int __init cpu8815_mmcsd_init(void)
{
- iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
-}
+ struct device_node *cdbias;
+ int gpio, err;
-void __init cpu8815_init_irq(void)
-{
- /* This modified VIC cell has two register blocks, at 0 and 0x20 */
- vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
- vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
-
- /*
- * Init clocks here so that they are available for system timer
- * initialization.
- */
- nomadik_clk_init();
+ cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio");
+ if (!cdbias) {
+ pr_info("could not find MMC/SD card detect bias node\n");
+ return 0;
+ }
+ gpio = of_get_gpio(cdbias, 0);
+ if (gpio < 0) {
+ pr_info("could not obtain MMC/SD card detect bias GPIO\n");
+ return 0;
+ }
+ err = gpio_request(gpio, "card detect bias");
+ if (err) {
+ pr_info("failed to request card detect bias GPIO %d\n", gpio);
+ return -ENODEV;
+ }
+ err = gpio_direction_output(gpio, 0);
+ if (err){
+ pr_info("failed to set GPIO %d as output, low\n", gpio);
+ return err;
+ }
+ pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio);
+ return 0;
}
+device_initcall(cpu8815_mmcsd_init);
-/*
- * This function is called from the board init ("init_machine").
- */
- void __init cpu8815_platform_init(void)
+
+/* These are mostly to get the right device names for the clock lookups */
+static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
+ "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
+ "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
+ "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
+ "gpio.3", NULL),
+ OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
+ "pinctrl-stn8815", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
+ "uart0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
+ "uart1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE,
+ "rng", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
+ "rtc-pl031", NULL),
+ OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
+ "fsmc-nand", &cpu8815_nand_data),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
+ "mmci", &mmcsd_plat_data),
+ { /* sentinel */ },
+};
+
+static void __init cpu8815_init_of(void)
{
#ifdef CONFIG_CACHE_L2X0
/* At full speed latency must be >=2, so 0x249 in low bits */
- l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+ l2x0_of_init(0x00730249, 0xfe000fff);
#endif
- return;
+ pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
+ of_platform_populate(NULL, of_default_bus_match_table,
+ cpu8815_auxdata_lookup, NULL);
}
-void cpu8815_restart(char mode, const char *cmd)
-{
- void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
-
- /* FIXME: use egpio when implemented */
+static const char * cpu8815_board_compat[] = {
+ "calaosystems,usb-s8815",
+ NULL,
+};
- /* Write anything to Reset status register */
- writel(1, src_rstsr);
-}
+DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
+ .map_io = cpu8815_map_io,
+ .init_irq = irqchip_init,
+ .init_time = cpu8815_timer_init_of,
+ .init_machine = cpu8815_init_of,
+ .restart = cpu8815_restart,
+ .dt_compat = cpu8815_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h
deleted file mode 100644
index 71c21e8a11dc..000000000000
--- a/arch/arm/mach-nomadik/cpu-8815.h
+++ /dev/null
@@ -1,4 +0,0 @@
-extern void cpu8815_map_io(void);
-extern void cpu8815_platform_init(void);
-extern void cpu8815_init_irq(void);
-extern void cpu8815_restart(char, const char *);
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
deleted file mode 100644
index 0c2f6628299a..000000000000
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ /dev/null
@@ -1,88 +0,0 @@
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-
-/*
- * There are two busses in the 8815NHK.
- * They could, in theory, be driven by the hardware component, but we
- * use bit-bang through GPIO by now, to keep things simple
- */
-
-/* I2C0 connected to the STw4811 power management chip */
-static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
- /* keep defaults for timeouts; pins are push-pull bidirectional */
- .scl_pin = 62,
- .sda_pin = 63,
-};
-
-/* I2C1 connected to various sensors */
-static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
- /* keep defaults for timeouts; pins are push-pull bidirectional */
- .scl_pin = 53,
- .sda_pin = 54,
-};
-
-/* I2C2 connected to the USB portions of the STw4811 only */
-static struct i2c_gpio_platform_data nhk8815_i2c_data2 = {
- /* keep defaults for timeouts; pins are push-pull bidirectional */
- .scl_pin = 73,
- .sda_pin = 74,
-};
-
-static struct platform_device nhk8815_i2c_dev0 = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &nhk8815_i2c_data0,
- },
-};
-
-static struct platform_device nhk8815_i2c_dev1 = {
- .name = "i2c-gpio",
- .id = 1,
- .dev = {
- .platform_data = &nhk8815_i2c_data1,
- },
-};
-
-static struct platform_device nhk8815_i2c_dev2 = {
- .name = "i2c-gpio",
- .id = 2,
- .dev = {
- .platform_data = &nhk8815_i2c_data2,
- },
-};
-
-static pin_cfg_t cpu8815_pins_i2c[] = {
- PIN_CFG_INPUT(62, GPIO, PULLUP),
- PIN_CFG_INPUT(63, GPIO, PULLUP),
- PIN_CFG_INPUT(53, GPIO, PULLUP),
- PIN_CFG_INPUT(54, GPIO, PULLUP),
- PIN_CFG_INPUT(73, GPIO, PULLUP),
- PIN_CFG_INPUT(74, GPIO, PULLUP),
-};
-
-static int __init nhk8815_i2c_init(void)
-{
- nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
- platform_device_register(&nhk8815_i2c_dev0);
- platform_device_register(&nhk8815_i2c_dev1);
- platform_device_register(&nhk8815_i2c_dev2);
-
- return 0;
-}
-
-static void __exit nhk8815_i2c_exit(void)
-{
- platform_device_unregister(&nhk8815_i2c_dev0);
- platform_device_unregister(&nhk8815_i2c_dev1);
- platform_device_unregister(&nhk8815_i2c_dev2);
- return;
-}
-
-module_init(nhk8815_i2c_init);
-module_exit(nhk8815_i2c_exit);
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
deleted file mode 100644
index 02035e459f50..000000000000
--- a/arch/arm/mach-nomadik/include/mach/hardware.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * This file contains the hardware definitions of the Nomadik.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * YOU should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
-#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */
-#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */
-#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */
-
-/* used in C code, so cast to proper type */
-#define io_p2v(x) ((void __iomem *)(x) \
- - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-#define io_v2p(x) ((unsigned long)(x) \
- - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
-
-/* used in asm code, so no casts */
-#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-
-/*
- * Base address defination for Nomadik Onchip Logic Block
- */
-#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
-#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
-#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
-#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
-#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
-#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
-#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
-#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
-#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
-#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
-#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
-#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
-#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
-#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
-#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
-#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
-#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
-#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
-#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
-#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
-#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
-#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
-#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
-#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
-#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
-#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
-#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
-#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
-#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
-#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
-#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
-#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
-#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
-#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
-#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
-#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
-#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
-#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
-#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
-#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
-
-/* Other ranges, not for p2v/v2p */
-#define NOMADIK_BACKUP_RAM 0x80010000
-#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */
-#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */
-#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */
-#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */
-
-#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE)
-#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE)
-#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE)
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index 215f8cdb4004..90ac965a92fe 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -20,8 +20,6 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <mach/hardware.h>
-
#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */
/*
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
index f527af6527c8..106fccca2021 100644
--- a/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -21,7 +21,6 @@
#include <asm/setup.h>
#include <asm/io.h>
-#include <mach/hardware.h>
/* we need the constants in amba/serial.h, but it refers to amba_device */
struct amba_device;