Merge tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SocS Device Tree changes
for v5.17, please pull the following:

- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.

- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.

- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging

- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding

- Uwe adds GPIO offset to the gpio names properties for readability

- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML

- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.

* tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: correct RX delay and enable flow control on Asus RT-AC88U
  ARM: dts: NSP: Rename SATA unit name
  ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
  ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
  ARM: dts: Cygnus: Update PCIe PHY node unit name(s)
  ARM: dts: Cygnus: Fixed iProc PCIe controller properties
  dt-bindings: soc: bcm: Convert brcm,bcm2835-vchiq to json-schema
  ARM: dts: bcm2711-rpi-4-b: Add gpio offsets to line name array
  ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
  ARM: dts: BCM5301X: update CRU block description
  ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
  ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
  ARM: dts: BCM5301X: remove unnecessary address & size cells from Asus RT-AC88U
  ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties

8 files changed, 157 insertions, 78 deletions

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 8ecb7861ce10..ad65be871938 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -112,18 +112,18 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@301d0a0 {
+		pcie_phy: pcie_phy@301d0a0 {
 			compatible = "brcm,cygnus-pcie-phy";
 			reg = <0x0301d0a0 0x14>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pcie0_phy: phy@0 {
+			pcie0_phy: pcie-phy@0 {
 				reg = <0>;
 				#phy-cells = <0>;
 			};
 
-			pcie1_phy: phy@1 {
+			pcie1_phy: pcie-phy@1 {
 				reg = <1>;
 				#phy-cells = <0>;
 			};
@@ -274,8 +274,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
 			phys = <&pcie0_phy>;
 			phy-names = "pcie-phy";
@@ -283,7 +283,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi0>;
-			msi0: msi-controller {
+			msi0: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -309,8 +309,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
 			phys = <&pcie1_phy>;
 			phy-names = "pcie-phy";
@@ -318,7 +318,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi1>;
-			msi1: msi-controller {
+			msi1: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 84cda16f68a2..33e6ba63a1ee 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -318,7 +318,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -354,7 +354,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 1c08daa18858..5b1dc58d40ba 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -534,7 +534,7 @@
 			};
 		};
 
-		sata: ahci@41000 {
+		sata: sata@41000 {
 			compatible = "brcm,bcm-nsp-ahci";
 			reg-names = "ahci", "top-ctrl";
 			reg = <0x41000 0x1000>, <0x40020 0x1c>;
@@ -587,7 +587,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -624,7 +624,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -661,7 +661,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi-controller {
+		msi2: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 631dd5baf68d..4432412044de 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -65,12 +65,12 @@
 };
 
 &expgpio {
-	gpio-line-names = "BT_ON",
+	gpio-line-names = "BT_ON",		/*  0 */
 			  "WL_ON",
 			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "CAM_GPIO",		/*  5 */
 			  "SD_PWR_ON",
 			  "";
 };
@@ -84,66 +84,66 @@
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
-	gpio-line-names = "ID_SDA",
+	gpio-line-names = "ID_SDA",		/*  0 */
 			  "ID_SCL",
 			  "SDA1",
 			  "SCL1",
 			  "GPIO_GCLK",
-			  "GPIO5",
+			  "GPIO5",		/*  5 */
 			  "GPIO6",
 			  "SPI_CE1_N",
 			  "SPI_CE0_N",
 			  "SPI_MISO",
-			  "SPI_MOSI",
+			  "SPI_MOSI",		/* 10 */
 			  "SPI_SCLK",
 			  "GPIO12",
 			  "GPIO13",
 			  /* Serial port */
 			  "TXD1",
-			  "RXD1",
+			  "RXD1",		/* 15 */
 			  "GPIO16",
 			  "GPIO17",
 			  "GPIO18",
 			  "GPIO19",
-			  "GPIO20",
+			  "GPIO20",		/* 20 */
 			  "GPIO21",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
-			  "GPIO25",
+			  "GPIO25",		/* 25 */
 			  "GPIO26",
 			  "GPIO27",
 			  "RGMII_MDIO",
 			  "RGMIO_MDC",
 			  /* Used by BT module */
-			  "CTS0",
+			  "CTS0",		/* 30 */
 			  "RTS0",
 			  "TXD0",
 			  "RXD0",
 			  /* Used by Wifi */
 			  "SD1_CLK",
-			  "SD1_CMD",
+			  "SD1_CMD",		/* 35 */
 			  "SD1_DATA0",
 			  "SD1_DATA1",
 			  "SD1_DATA2",
 			  "SD1_DATA3",
 			  /* Shared with SPI flash */
-			  "PWM0_MISO",
+			  "PWM0_MISO",		/* 40 */
 			  "PWM1_MOSI",
 			  "STATUS_LED_G_CLK",
 			  "SPIFLASH_CE_N",
 			  "SDA0",
-			  "SCL0",
+			  "SCL0",		/* 45 */
 			  "RGMII_RXCLK",
 			  "RGMII_RXCTL",
 			  "RGMII_RXD0",
 			  "RGMII_RXD1",
-			  "RGMII_RXD2",
+			  "RGMII_RXD2",		/* 50 */
 			  "RGMII_RXD3",
 			  "RGMII_TXCLK",
 			  "RGMII_TXCTL",
 			  "RGMII_TXD0",
-			  "RGMII_TXD1",
+			  "RGMII_TXD1",		/* 55 */
 			  "RGMII_TXD2",
 			  "RGMII_TXD3";
 };
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index 448060561cd0..df8199fd4eb4 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -68,8 +68,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		wps {
 			label = "WPS";
@@ -95,6 +93,83 @@
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
 };
 
 &srab {
@@ -138,6 +213,7 @@
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
+				pause;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 64f973e1ef12..66c64a6ec414 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -84,40 +84,6 @@
 			max-brightness = <255>;
 		};
 	};
-
-	i2c {
-		/*
-		 * The platform provided I2C does not budge.
-		 * This is a replacement until I can figure
-		 * out what are the missing bits...
-		 */
-
-		compatible = "i2c-gpio";
-		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		current_sense: ina219@45 {
-			compatible = "ti,ina219";
-			reg = <0x45>;
-			shunt-resistor = <60000>; /* = 60 mOhms */
-		};
-
-		eeprom: eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			pagesize = <32>;
-			read-only;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			mac_address: mac-address@66 {
-				reg = <0x66 0x6>;
-			};
-		};
-	};
 };
 
 &uart0 {
@@ -228,3 +194,31 @@
 		};
 	};
 };
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index d4f355015e3c..588e57db6859 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -148,15 +148,6 @@
 		};
 	};
 
-	usb2_phy: usb2-phy@1800c000 {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -421,14 +412,14 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		cru@100 {
-			compatible = "simple-bus";
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
 			reg = <0x100 0x1a4>;
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			lcpll0: lcpll0@100 {
+			lcpll0: clock-controller@100 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-lcpll0";
 				reg = <0x100 0x14>;
@@ -437,7 +428,7 @@
 						     "sdio", "ddr_phy";
 			};
 
-			genpll: genpll@140 {
+			genpll: clock-controller@140 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-genpll";
 				reg = <0x140 0x24>;
@@ -448,6 +439,20 @@
 						     "sata1", "sata2";
 			};
 
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
 			pinctrl: pin-controller@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index 102acd85fab2..ba01054a76cf 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -118,6 +118,8 @@
 						reg = <0>;
 						ethernet = <&sgmii1>;
 						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
 						fixed-link {
 							speed = <1000>;
 							full-duplex;
@@ -194,6 +196,8 @@
 						reg = <0>;
 						ethernet = <&sgmii0>;
 						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
 						fixed-link {
 							speed = <1000>;
 							full-duplex;