habanalabs/gaudi2: update f/w files

Update gaudi2 firmware files with the latest version.
There is no functional change.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

2 files changed, 23 insertions, 16 deletions

diff --git a/drivers/accel/habanalabs/include/gaudi2/gaudi2_fw_if.h b/drivers/accel/habanalabs/include/gaudi2/gaudi2_fw_if.h
index e4a7d5725096..82f3ca2a3966 100644
--- a/drivers/accel/habanalabs/include/gaudi2/gaudi2_fw_if.h
+++ b/drivers/accel/habanalabs/include/gaudi2/gaudi2_fw_if.h
@@ -20,22 +20,25 @@
 
 #define GAUDI2_NUM_MME			4
 
+#define NUM_OF_GPIOS_PER_PORT		16
+#define GAUDI2_WD_GPIO			(62 % NUM_OF_GPIOS_PER_PORT)
+
 #define GAUDI2_ARCPID_TX_MB_SIZE	0x1000
 #define GAUDI2_ARCPID_RX_MB_SIZE	0x400
 #define GAUDI2_ARM_TX_MB_SIZE		0x400
 #define GAUDI2_ARM_RX_MB_SIZE		0x1800
 
 #define GAUDI2_DCCM_BASE_ADDR		0x27020000
-#define GAUDI2_ARCPID_TX_MB_ADDR	GAUDI2_DCCM_BASE_ADDR
-
-#define GAUDI2_ARCPID_RX_MB_ADDR	(GAUDI2_ARCPID_TX_MB_ADDR +	\
-					GAUDI2_ARCPID_TX_MB_SIZE)
 
 #define GAUDI2_ARM_TX_MB_ADDR		GAUDI2_MAILBOX_BASE_ADDR
 
 #define GAUDI2_ARM_RX_MB_ADDR		(GAUDI2_ARM_TX_MB_ADDR + \
 					GAUDI2_ARM_TX_MB_SIZE)
 
+#define GAUDI2_ARCPID_TX_MB_ADDR	(GAUDI2_ARM_RX_MB_ADDR + GAUDI2_ARM_RX_MB_SIZE)
+
+#define GAUDI2_ARCPID_RX_MB_ADDR	(GAUDI2_ARCPID_TX_MB_ADDR + GAUDI2_ARCPID_TX_MB_SIZE)
+
 #define GAUDI2_ARM_TX_MB_OFFSET		(GAUDI2_ARM_TX_MB_ADDR - \
 					GAUDI2_SP_SRAM_BASE_ADDR)
 
@@ -58,7 +61,9 @@ struct gaudi2_cold_rst_data {
 			u32 spsram_init_done : 1;
 			u32 fake_security_enable : 1;
 			u32 fake_sig_validation_en : 1;
-			u32 reserved : 26;
+			u32 bist_skip_enable : 1;
+			u32 bist_need_iatu_config : 1;
+			u32 reserved : 24;
 		};
 		__le32 data;
 	};
@@ -77,10 +82,10 @@ enum gaudi2_rst_src {
 };
 
 struct gaudi2_redundancy_ctx {
-	int redundant_hbm;
-	int redundant_edma;
-	int redundant_tpc;
-	int redundant_vdec;
+	__le32 redundant_hbm;
+	__le32 redundant_edma;
+	__le32 redundant_tpc;
+	__le32 redundant_vdec;
 	__le64 hbm_mask;
 	__le64 edma_mask;
 	__le64 tpc_mask;
diff --git a/drivers/accel/habanalabs/include/gaudi2/gaudi2_reg_map.h b/drivers/accel/habanalabs/include/gaudi2/gaudi2_reg_map.h
index ae7feb388f63..f3eaeb6d9b7e 100644
--- a/drivers/accel/habanalabs/include/gaudi2/gaudi2_reg_map.h
+++ b/drivers/accel/habanalabs/include/gaudi2/gaudi2_reg_map.h
@@ -24,14 +24,14 @@
 #define mmGIC_HOST_HALT_IRQ_POLL_REG		mmPSOC_GLOBAL_CONF_SCRATCHPAD_10
 #define mmGIC_HOST_INTS_IRQ_POLL_REG		mmPSOC_GLOBAL_CONF_SCRATCHPAD_11
 #define mmGIC_HOST_SOFT_RST_IRQ_POLL_REG	mmPSOC_GLOBAL_CONF_SCRATCHPAD_12
-#define mmEEPROM_COPY_LOCATION_REG		mmPSOC_GLOBAL_CONF_SCRATCHPAD_13
 #define mmCPU_RST_STATUS_TO_HOST		mmPSOC_GLOBAL_CONF_SCRATCHPAD_14
-#define mmENGINE_ARC_IRQ_CTRL_POLL_REG		mmPSOC_GLOBAL_CONF_SCRATCHPAD_15
-#define mmPID_CFG_REG				mmPSOC_GLOBAL_CONF_SCRATCHPAD_18
 /*
- * TODO: mmGIC_RAZWI_STATUS_REG is temporary
- * macro and to be removed after GAUDI2 PO
+ *  Single scratchpad register used for all ARCs to notify dccm queue full event to FW.
+ *  So a new event would overwrite any unhandled previous event. In other words, incase
+ *  of multiple events before previous ones are handled, last one would be considered.
  */
+#define mmENGINE_ARC_IRQ_CTRL_POLL_REG		mmPSOC_GLOBAL_CONF_SCRATCHPAD_15
+#define mmPID_CFG_REG				mmPSOC_GLOBAL_CONF_SCRATCHPAD_18
 #define mmGIC_RAZWI_STATUS_REG			mmPSOC_GLOBAL_CONF_SCRATCHPAD_19
 #define mmCPU_BOOT_DEV_STS0			mmPSOC_GLOBAL_CONF_SCRATCHPAD_20
 #define mmCPU_BOOT_DEV_STS1			mmPSOC_GLOBAL_CONF_SCRATCHPAD_21
@@ -40,11 +40,10 @@
 #define mmCPU_BOOT_ERR1				mmPSOC_GLOBAL_CONF_SCRATCHPAD_25
 #define mmUPD_STS				mmPSOC_GLOBAL_CONF_SCRATCHPAD_26
 #define mmUPD_CMD				mmPSOC_GLOBAL_CONF_SCRATCHPAD_27
-#define mmUBOOT_VER_OFFSET			mmPSOC_GLOBAL_CONF_SCRATCHPAD_29
+#define mmPPBOOT_VER_OFFSET			mmPSOC_GLOBAL_CONF_SCRATCHPAD_28
 #define mmRDWR_TEST				mmPSOC_GLOBAL_CONF_SCRATCHPAD_30
 #define mmBTL_ID				mmPSOC_GLOBAL_CONF_SCRATCHPAD_31
 #define mmRST_SRC				mmPSOC_GLOBAL_CONF_COLD_RST_FLOPS_0
-#define mmPREBOOT_PCIE_EN			mmPSOC_GLOBAL_CONF_COLD_RST_FLOPS_1
 #define mmCOLD_RST_DATA				mmPSOC_GLOBAL_CONF_COLD_RST_FLOPS_2
 #define mmUPD_PENDING_STS			mmPSOC_GLOBAL_CONF_COLD_RST_FLOPS_3
 #define mmPID_CMD_REQ_REG			mmPSOC_PID_PID_CMD_0
@@ -55,5 +54,8 @@
 #define mmPID_CMD_TELEMETRY_REG_0_HI		mmPSOC_PID_PID_CMD_5
 #define mmPID_CMD_TELEMETRY_REG_1		mmPSOC_PID_PID_CMD_6
 #define mmPID_CMD_TELEMETRY_REG_1_HI		mmPSOC_PID_PID_CMD_7
+#define mmWD_GPIO_OUTSET_REG			mmPSOC_GPIO3_OUTENSET
+#define mmWD_GPIO_DATAOUT_REG			mmPSOC_GPIO3_DATAOUT
+#define mmSTM_PROFILER_SPE_REG			mmPSOC_STM_STMSPER
 
 #endif /* GAUDI2_REG_MAP_H_ */