summaryrefslogtreecommitdiff
path: root/drivers/acpi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-06-11 00:04:39 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-06-11 00:04:39 +0300
commit0c67f6b29715ff888cb967cc98336221a8a23916 (patch)
treeb5d29ea64f7ff74c841d20fe74187429d1753f00 /drivers/acpi
parent49f13b0921aaef0d5519358fd9fcc237c1c9124a (diff)
parent50dd154ed7b17a8b3a1983fc32a8e41d4cc4211a (diff)
downloadlinux-0c67f6b29715ff888cb967cc98336221a8a23916.tar.xz
Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/device_pm.c2
-rw-r--r--drivers/acpi/scan.c28
2 files changed, 20 insertions, 10 deletions
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index b44b12a931e7..94d91c67aeae 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -186,7 +186,7 @@ int acpi_device_set_power(struct acpi_device *device, int state)
* possibly drop references to the power resources in use.
*/
state = ACPI_STATE_D3_HOT;
- /* If _PR3 is not available, use D3hot as the target state. */
+ /* If D3cold is not supported, use D3hot as the target state. */
if (!device->power.states[ACPI_STATE_D3_COLD].flags.valid)
target_state = state;
} else if (!device->power.states[state].flags.valid) {
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 4da23e751bce..8777faced51a 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -918,12 +918,9 @@ static void acpi_bus_init_power_state(struct acpi_device *device, int state)
if (buffer.length && package
&& package->type == ACPI_TYPE_PACKAGE
- && package->package.count) {
- int err = acpi_extract_power_resources(package, 0,
- &ps->resources);
- if (!err)
- device->power.flags.power_resources = 1;
- }
+ && package->package.count)
+ acpi_extract_power_resources(package, 0, &ps->resources);
+
ACPI_FREE(buffer.pointer);
}
@@ -970,14 +967,27 @@ static void acpi_bus_get_power_flags(struct acpi_device *device)
acpi_bus_init_power_state(device, i);
INIT_LIST_HEAD(&device->power.states[ACPI_STATE_D3_COLD].resources);
- if (!list_empty(&device->power.states[ACPI_STATE_D3_HOT].resources))
- device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
- /* Set defaults for D0 and D3hot states (always valid) */
+ /* Set the defaults for D0 and D3hot (always supported). */
device->power.states[ACPI_STATE_D0].flags.valid = 1;
device->power.states[ACPI_STATE_D0].power = 100;
device->power.states[ACPI_STATE_D3_HOT].flags.valid = 1;
+ /*
+ * Use power resources only if the D0 list of them is populated, because
+ * some platforms may provide _PR3 only to indicate D3cold support and
+ * in those cases the power resources list returned by it may be bogus.
+ */
+ if (!list_empty(&device->power.states[ACPI_STATE_D0].resources)) {
+ device->power.flags.power_resources = 1;
+ /*
+ * D3cold is supported if the D3hot list of power resources is
+ * not empty.
+ */
+ if (!list_empty(&device->power.states[ACPI_STATE_D3_HOT].resources))
+ device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
+ }
+
if (acpi_bus_init_power(device))
device->flags.power_manageable = 0;
}