diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-08-10 15:31:37 +0400 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-08-10 15:31:37 +0400 |
commit | c6fd280766a050b13360d7c2d59a3d6bd3a27d9a (patch) | |
tree | fdbeab639bc3dec29267bbf4b32cff7c8dd03593 /drivers/ata/ata_piix.c | |
parent | 79ed35a9f139ad2b2653dfdd5f45a8f1453e2cbb (diff) | |
download | linux-c6fd280766a050b13360d7c2d59a3d6bd3a27d9a.tar.xz |
Move libata to drivers/ata.
Diffstat (limited to 'drivers/ata/ata_piix.c')
-rw-r--r-- | drivers/ata/ata_piix.c | 960 |
1 files changed, 960 insertions, 0 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c new file mode 100644 index 000000000000..46c34fd5af8f --- /dev/null +++ b/drivers/ata/ata_piix.c @@ -0,0 +1,960 @@ +/* + * ata_piix.c - Intel PATA/SATA controllers + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * + * Copyright 2003-2005 Red Hat Inc + * Copyright 2003-2005 Jeff Garzik + * + * + * Copyright header from piix.c: + * + * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer + * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available at http://developer.intel.com/ + * + * Documentation + * Publically available from Intel web site. Errata documentation + * is also publically available. As an aide to anyone hacking on this + * driver the list of errata that are relevant is below.going back to + * PIIX4. Older device documentation is now a bit tricky to find. + * + * The chipsets all follow very much the same design. The orginal Triton + * series chipsets do _not_ support independant device timings, but this + * is fixed in Triton II. With the odd mobile exception the chips then + * change little except in gaining more modes until SATA arrives. This + * driver supports only the chips with independant timing (that is those + * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix + * for the early chip drivers. + * + * Errata of note: + * + * Unfixable + * PIIX4 errata #9 - Only on ultra obscure hw + * ICH3 errata #13 - Not observed to affect real hw + * by Intel + * + * Things we must deal with + * PIIX4 errata #10 - BM IDE hang with non UDMA + * (must stop/start dma to recover) + * 440MX errata #15 - As PIIX4 errata #10 + * PIIX4 errata #15 - Must not read control registers + * during a PIO transfer + * 440MX errata #13 - As PIIX4 errata #15 + * ICH2 errata #21 - DMA mode 0 doesn't work right + * ICH0/1 errata #55 - As ICH2 errata #21 + * ICH2 spec c #9 - Extra operations needed to handle + * drive hotswap [NOT YET SUPPORTED] + * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary + * and must be dword aligned + * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * + * Should have been BIOS fixed: + * 450NX: errata #19 - DMA hangs on old 450NX + * 450NX: errata #20 - DMA hangs on old 450NX + * 450NX: errata #25 - Corruption with DMA on old 450NX + * ICH3 errata #15 - IDE deadlock under high load + * (BIOS must set dev 31 fn 0 bit 23) + * ICH3 errata #18 - Don't use native mode + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "ata_piix" +#define DRV_VERSION "2.00" + +enum { + PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ + ICH5_PMR = 0x90, /* port mapping register */ + ICH5_PCS = 0x92, /* port control and status */ + PIIX_SCC = 0x0A, /* sub-class code register */ + + PIIX_FLAG_IGNORE_PCS = (1 << 25), /* ignore PCS present bits */ + PIIX_FLAG_SCR = (1 << 26), /* SCR available */ + PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ + PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ + + /* combined mode. if set, PATA is channel 0. + * if clear, PATA is channel 1. + */ + PIIX_PORT_ENABLED = (1 << 0), + PIIX_PORT_PRESENT = (1 << 4), + + PIIX_80C_PRI = (1 << 5) | (1 << 4), + PIIX_80C_SEC = (1 << 7) | (1 << 6), + + /* controller IDs */ + piix4_pata = 0, + ich5_pata = 1, + ich5_sata = 2, + esb_sata = 3, + ich6_sata = 4, + ich6_sata_ahci = 5, + ich6m_sata_ahci = 6, + ich8_sata_ahci = 7, + + /* constants for mapping table */ + P0 = 0, /* port 0 */ + P1 = 1, /* port 1 */ + P2 = 2, /* port 2 */ + P3 = 3, /* port 3 */ + IDE = -1, /* IDE */ + NA = -2, /* not avaliable */ + RV = -3, /* reserved */ + + PIIX_AHCI_DEVICE = 6, +}; + +struct piix_map_db { + const u32 mask; + const u16 port_enable; + const int present_shift; + const int map[][4]; +}; + +struct piix_host_priv { + const int *map; + const struct piix_map_db *map_db; +}; + +static int piix_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); +static void piix_host_stop(struct ata_host_set *host_set); +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void piix_pata_error_handler(struct ata_port *ap); +static void piix_sata_error_handler(struct ata_port *ap); + +static unsigned int in_module_init = 1; + +static const struct pci_device_id piix_pci_tbl[] = { +#ifdef ATA_ENABLE_PATA + { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, + { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, +#endif + + /* NOTE: The following PCI ids must be kept in sync with the + * list in drivers/pci/quirks.c. + */ + + /* 82801EB (ICH5) */ + { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 82801EB (ICH5) */ + { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 6300ESB (ICH5 variant with broken PCS present bits) */ + { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 6300ESB pretending RAID */ + { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 82801FB/FW (ICH6/ICH6W) */ + { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* 82801FR/FRW (ICH6R/ICH6RW) */ + { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */ + { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* 82801GB/GR/GH (ICH7, identical to ICH6) */ + { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* Enterprise Southbridge 2 (where's the datasheet?) */ + { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ + { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* SATA Controller 2 IDE (ICH8, ditto) */ + { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* Mobile SATA Controller IDE (ICH8M, ditto) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + + { } /* terminate list */ +}; + +static struct pci_driver piix_pci_driver = { + .name = DRV_NAME, + .id_table = piix_pci_tbl, + .probe = piix_init_one, + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +}; + +static struct scsi_host_template piix_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, +}; + +static const struct ata_port_operations piix_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = piix_set_piomode, + .set_dmamode = piix_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = piix_host_stop, +}; + +static const struct ata_port_operations piix_sata_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_sata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = piix_host_stop, +}; + +static const struct piix_map_db ich5_map_db = { + .mask = 0x7, + .port_enable = 0x3, + .present_shift = 4, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 000b */ + { P1, NA, P0, NA }, /* 001b */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, + { P0, P1, IDE, IDE }, /* 100b */ + { P1, P0, IDE, IDE }, /* 101b */ + { IDE, IDE, P0, P1 }, /* 110b */ + { IDE, IDE, P1, P0 }, /* 111b */ + }, +}; + +static const struct piix_map_db ich6_map_db = { + .mask = 0x3, + .port_enable = 0xf, + .present_shift = 4, + .map = { + /* PM PS SM SS MAP */ + { P0, P2, P1, P3 }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich6m_map_db = { + .mask = 0x3, + .port_enable = 0x5, + .present_shift = 4, + .map = { + /* PM PS SM SS MAP */ + { P0, P2, RV, RV }, /* 00b */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich8_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .present_shift = 8, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b (hardwired) */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, /* 10b (never) */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db *piix_map_db_table[] = { + [ich5_sata] = &ich5_map_db, + [esb_sata] = &ich5_map_db, + [ich6_sata] = &ich6_map_db, + [ich6_sata_ahci] = &ich6_map_db, + [ich6m_sata_ahci] = &ich6m_map_db, + [ich8_sata_ahci] = &ich8_map_db, +}; + +static struct ata_port_info piix_port_info[] = { + /* piix4_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = ATA_UDMA_MASK_40C, + .port_ops = &piix_pata_ops, + }, + + /* ich5_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &piix_pata_ops, + }, + + /* ich5_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* i6300esb_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich6_sata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich6_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich6m_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich8_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, +}; + +static struct pci_bits piix_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ +}; + +MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik"); +MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, piix_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +/** + * piix_pata_cbl_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from ATA PCI device's PCI config + * register. This register is normally set by firmware (BIOS). + * + * LOCKING: + * None (inherited from caller). + */ +static void piix_pata_cbl_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 tmp, mask; + + /* no 80c support in host controller? */ + if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0) + goto cbl40; + + /* check BIOS cable detect results */ + mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; + pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); + if ((tmp & mask) == 0) + goto cbl40; + + ap->cbl = ATA_CBL_PATA80; + return; + +cbl40: + ap->cbl = ATA_CBL_PATA40; + ap->udma_mask &= ATA_UDMA_MASK_40C; +} + +/** + * piix_pata_prereset - prereset for PATA host controller + * @ap: Target port + * + * Prereset including cable detection. + * + * LOCKING: + * None (inherited from caller). + */ +static int piix_pata_prereset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + + if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) { + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + return 0; + } + + piix_pata_cbl_detect(ap); + + return ata_std_prereset(ap); +} + +static void piix_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * piix_sata_prereset - prereset for SATA host controller + * @ap: Target port + * + * Reads and configures SATA PCI device's PCI config register + * Port Configuration and Status (PCS) to determine port and + * device availability. Return -ENODEV to skip reset if no + * device is present. + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: + * 0 if device is present, -ENODEV otherwise. + */ +static int piix_sata_prereset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + struct piix_host_priv *hpriv = ap->host_set->private_data; + const unsigned int *map = hpriv->map; + int base = 2 * ap->port_no; + unsigned int present = 0; + int port, i; + u16 pcs; + + pci_read_config_word(pdev, ICH5_PCS, &pcs); + DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); + + for (i = 0; i < 2; i++) { + port = map[base + i]; + if (port < 0) + continue; + if ((ap->flags & PIIX_FLAG_IGNORE_PCS) || + (pcs & 1 << (hpriv->map_db->present_shift + port))) + present = 1; + } + + DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n", + ap->id, pcs, present); + + if (!present) { + ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + return 0; + } + + return ata_std_prereset(ap); +} + +static void piix_sata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, + ata_std_postreset); +} + +/** + * piix_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + unsigned int is_slave = (adev->devno != 0); + unsigned int master_port= ap->port_no ? 0x42 : 0x40; + unsigned int slave_port = 0x44; + u16 master_data; + u8 slave_data; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + master_data |= 0x4000; + /* enable PPE, IE and TIME */ + master_data |= 0x0070; + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + slave_data |= + (timings[pio][0] << 2) | + (timings[pio][1] << (ap->port_no ? 4 : 0)); + } else { + master_data &= 0xccf8; + /* enable PPE, IE and TIME */ + master_data |= 0x0007; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); +} + +/** + * piix_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * @udma: udma mode, 0 - 6 + * + * Set UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ + struct pci_dev *dev = to_pci_dev(ap->host_set->dev); + u8 maslave = ap->port_no ? 0x42 : 0x40; + u8 speed = udma; + unsigned int drive_dn = (ap->port_no ? 2 : 0) + adev->devno; + int a_speed = 3 << (drive_dn * 4); + int u_flag = 1 << drive_dn; + int v_flag = 0x01 << drive_dn; + int w_flag = 0x10 << drive_dn; + int u_speed = 0; + int sitre; + u16 reg4042, reg4a; + u8 reg48, reg54, reg55; + + pci_read_config_word(dev, maslave, ®4042); + DPRINTK("reg4042 = 0x%04x\n", reg4042); + sitre = (reg4042 & 0x4000) ? 1 : 0; + pci_read_config_byte(dev, 0x48, ®48); + pci_read_config_word(dev, 0x4a, ®4a); + pci_read_config_byte(dev, 0x54, ®54); + pci_read_config_byte(dev, 0x55, ®55); + + switch(speed) { + case XFER_UDMA_4: + case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break; + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_3: + case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break; + case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: break; + default: + BUG(); + return; + } + + if (speed >= XFER_UDMA_0) { + if (!(reg48 & u_flag)) + pci_write_config_byte(dev, 0x48, reg48 | u_flag); + if (speed == XFER_UDMA_5) { + pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); + } else { + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } + if ((reg4a & a_speed) != u_speed) + pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); + if (speed > XFER_UDMA_2) { + if (!(reg54 & v_flag)) + pci_write_config_byte(dev, 0x54, reg54 | v_flag); + } else + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + } else { + if (reg48 & u_flag) + pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); + if (reg4a & a_speed) + pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); + if (reg54 & v_flag) + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + if (reg55 & w_flag) + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } +} + +#define AHCI_PCI_BAR 5 +#define AHCI_GLOBAL_CTL 0x04 +#define AHCI_ENABLE (1 << 31) +static int piix_disable_ahci(struct pci_dev *pdev) +{ + void __iomem *mmio; + u32 tmp; + int rc = 0; + + /* BUG: pci_enable_device has not yet been called. This + * works because this device is usually set up by BIOS. + */ + + if (!pci_resource_start(pdev, AHCI_PCI_BAR) || + !pci_resource_len(pdev, AHCI_PCI_BAR)) + return 0; + + mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64); + if (!mmio) + return -ENOMEM; + + tmp = readl(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) { + tmp &= ~AHCI_ENABLE; + writel(tmp, mmio + AHCI_GLOBAL_CTL); + + tmp = readl(mmio + AHCI_GLOBAL_CTL); + if (tmp & AHCI_ENABLE) + rc = -EIO; + } + + pci_iounmap(pdev, mmio); + return rc; +} + +/** + * piix_check_450nx_errata - Check for problem 450NX setup + * @ata_dev: the PCI device to check + * + * Check for the present of 450NX errata #19 and errata #25. If + * they are found return an error code so we can turn off DMA + */ + +static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) +{ + struct pci_dev *pdev = NULL; + u16 cfg; + u8 rev; + int no_piix_dma = 0; + + while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) + { + /* Look for 450NX PXB. Check for problem configurations + A PCI quirk checks bit 6 already */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + pci_read_config_word(pdev, 0x41, &cfg); + /* Only on the original revision: IDE DMA can hang */ + if (rev == 0x00) + no_piix_dma = 1; + /* On all revisions below 5 PXB bus lock must be disabled for IDE */ + else if (cfg & (1<<14) && rev < 5) + no_piix_dma = 2; + } + if (no_piix_dma) + dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); + if (no_piix_dma == 2) + dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); + return no_piix_dma; +} + +static void __devinit piix_init_pcs(struct pci_dev *pdev, + const struct piix_map_db *map_db) +{ + u16 pcs, new_pcs; + + pci_read_config_word(pdev, ICH5_PCS, &pcs); + + new_pcs = pcs | map_db->port_enable; + + if (new_pcs != pcs) { + DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs); + pci_write_config_word(pdev, ICH5_PCS, new_pcs); + msleep(150); + } +} + +static void __devinit piix_init_sata_map(struct pci_dev *pdev, + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) +{ + struct piix_host_priv *hpriv = pinfo[0].private_data; + const unsigned int *map; + int i, invalid_map = 0; + u8 map_value; + + pci_read_config_byte(pdev, ICH5_PMR, &map_value); + + map = map_db->map[map_value & map_db->mask]; + + dev_printk(KERN_INFO, &pdev->dev, "MAP ["); + for (i = 0; i < 4; i++) { + switch (map[i]) { + case RV: + invalid_map = 1; + printk(" XX"); + break; + + case NA: + printk(" --"); + break; + + case IDE: + WARN_ON((i & 1) || map[i + 1] != IDE); + pinfo[i / 2] = piix_port_info[ich5_pata]; + pinfo[i / 2].private_data = hpriv; + i++; + printk(" IDE IDE"); + break; + + default: + printk(" P%d", map[i]); + if (i & 1) + pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; + break; + } + } + printk(" ]\n"); + + if (invalid_map) + dev_printk(KERN_ERR, &pdev->dev, + "invalid MAP value %u\n", map_value); + + hpriv->map = map; + hpriv->map_db = map_db; +} + +/** + * piix_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in piix_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_port_info port_info[2]; + struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; + struct piix_host_priv *hpriv; + unsigned long host_flags; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* no hotplugging support (FIXME) */ + if (!in_module_init) + return -ENODEV; + + hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + + port_info[0] = piix_port_info[ent->driver_data]; + port_info[1] = piix_port_info[ent->driver_data]; + port_info[0].private_data = hpriv; + port_info[1].private_data = hpriv; + + host_flags = port_info[0].host_flags; + + if (host_flags & PIIX_FLAG_AHCI) { + u8 tmp; + pci_read_config_byte(pdev, PIIX_SCC, &tmp); + if (tmp == PIIX_AHCI_DEVICE) { + int rc = piix_disable_ahci(pdev); + if (rc) + return rc; + } + } + + /* Initialize SATA map */ + if (host_flags & ATA_FLAG_SATA) { + piix_init_sata_map(pdev, port_info, + piix_map_db_table[ent->driver_data]); + piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]); + } + + /* On ICH5, some BIOSen disable the interrupt using the + * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. + * On ICH6, this bit has the same effect, but only when + * MSI is disabled (and it is disabled, as we don't use + * message-signalled interrupts currently). + */ + if (host_flags & PIIX_FLAG_CHECKINTR) + pci_intx(pdev, 1); + + if (piix_check_450nx_errata(pdev)) { + /* This writes into the master table but it does not + really matter for this errata as we will apply it to + all the PIIX devices on the board */ + port_info[0].mwdma_mask = 0; + port_info[0].udma_mask = 0; + port_info[1].mwdma_mask = 0; + port_info[1].udma_mask = 0; + } + return ata_pci_init_one(pdev, ppinfo, 2); +} + +static void piix_host_stop(struct ata_host_set *host_set) +{ + ata_host_stop(host_set); +} + +static int __init piix_init(void) +{ + int rc; + + DPRINTK("pci_register_driver\n"); + rc = pci_register_driver(&piix_pci_driver); + if (rc) + return rc; + + in_module_init = 0; + + DPRINTK("done\n"); + return 0; +} + +static void __exit piix_exit(void) +{ + pci_unregister_driver(&piix_pci_driver); +} + +module_init(piix_init); +module_exit(piix_exit); + |