summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-eh.c
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2017-09-14 13:35:36 +0300
committerTejun Heo <tj@kernel.org>2017-09-19 06:22:04 +0300
commitf4ac6476945ff62939420bcf8266e39f8d5d54bd (patch)
tree3428a2c2eeff5f7e8f63949914246add64721a90 /drivers/ata/libata-eh.c
parent23e4c67ae13da7549a54f4e8c0014f48b2ef5204 (diff)
downloadlinux-f4ac6476945ff62939420bcf8266e39f8d5d54bd.tar.xz
libata: Add new med_power_with_dipm link_power_management_policy setting
As described by Matthew Garret quite a while back: https://mjg59.dreamwidth.org/34868.html Intel CPUs starting with the Haswell generation need SATA links to power down for the "package" part of the CPU to reach low power-states like PC7 / P8 which bring a significant power-saving with them. The default max_performance lpm policy does not allow for these high PC states, both the medium_power and min_power policies do allow this. The min_power policy saves significantly more power, but there are some reports of some disks / SSDs not liking min_power leading to system crashes and in some cases even data corruption has been reported. Matthew has found a document documenting the default settings of Intel's IRST Windows driver with which most laptops ship: https://www-ssl.intel.com/content/dam/doc/reference-guide/sata-devices-implementation-recommendations.pdf Matthew wrote a patch changing med_power to match those defaults, but that never got anywhere as some people where reporting issues with the patch-set that patch was a part of. This commit is another attempt to make the default IRST driver settings available under Linux, but instead of changing medium_power and potentially introducing regressions, this commit adds a new med_power_with_dipm setting which is identical to the existing medium_power accept that it enables dipm on top, which makes it match the Windows IRST driver settings, which should hopefully be safe to use on most devices. The med_power_with_dipm setting is close to min_power, except that: a) It does not use host-initiated slumber mode (ASP not set), but it does allow device-initiated slumber b) It does not enable DevSlp mode On my T440s test laptop I get the following power savings when idle: medium_power 0.9W med_power_with_dipm 1.2W min_power 1.2W Suggested-by: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/libata-eh.c')
-rw-r--r--drivers/ata/libata-eh.c10
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index e4effef0c83f..49b3745d2c1f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3454,9 +3454,9 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev)
* @r_failed_dev: out parameter for failed device
*
* Enable SATA Interface power management. This will enable
- * Device Interface Power Management (DIPM) for min_power
- * policy, and then call driver specific callbacks for
- * enabling Host Initiated Power management.
+ * Device Interface Power Management (DIPM) for min_power and
+ * medium_power_with_dipm policies, and then call driver specific
+ * callbacks for enabling Host Initiated Power management.
*
* LOCKING:
* EH context.
@@ -3502,7 +3502,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
hints &= ~ATA_LPM_HIPM;
/* disable DIPM before changing link config */
- if (policy != ATA_LPM_MIN_POWER && dipm) {
+ if (policy < ATA_LPM_MED_POWER_WITH_DIPM && dipm) {
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_DISABLE, SATA_DIPM);
if (err_mask && err_mask != AC_ERR_DEV) {
@@ -3545,7 +3545,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
/* host config updated, enable DIPM if transitioning to MIN_POWER */
ata_for_each_dev(dev, link, ENABLED) {
- if (policy == ATA_LPM_MIN_POWER && !no_dipm &&
+ if (policy >= ATA_LPM_MED_POWER_WITH_DIPM && !no_dipm &&
ata_id_has_dipm(dev->id)) {
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_ENABLE, SATA_DIPM);