summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_macio.c
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-12-01 17:36:29 +0300
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-12-09 09:09:28 +0300
commit88358ab08944da726e948d216977ad499dfc15c6 (patch)
tree76486614e50bea58e1bbd0f8bd61d9ba4a6721fb /drivers/ata/pata_macio.c
parentf0353813afe784330622596ff141e7525ccd99de (diff)
downloadlinux-88358ab08944da726e948d216977ad499dfc15c6.tar.xz
libata/drivers: Add driver for Apple "MacIO" IDE controller
This is a libata driver for the "macio" IDE controller used on most Apple PowerMac and PowerBooks. It's a libata equivalent of drivers/ide/ppc/pmac.c It supports all the features of its predecessor, including mediabay hotplug and suspend/resume. It should also support module load/unload. The timing calculations have been simplified to use pre-calculated tables compared to drivers/ide/pmac.c and it uses the new mediabay interface provided by a previous patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/pata_macio.c')
-rw-r--r--drivers/ata/pata_macio.c1427
1 files changed, 1427 insertions, 0 deletions
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
new file mode 100644
index 000000000000..4cc7bbd10ec2
--- /dev/null
+++ b/drivers/ata/pata_macio.c
@@ -0,0 +1,1427 @@
+/*
+ * Libata based driver for Apple "macio" family of PATA controllers
+ *
+ * Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ *
+ * Some bits and pieces from drivers/ide/ppc/pmac.c
+ *
+ */
+
+#undef DEBUG
+#undef DEBUG_DMA
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/scatterlist.h>
+#include <linux/of.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+
+#include <asm/macio.h>
+#include <asm/io.h>
+#include <asm/dbdma.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/mediabay.h>
+
+#ifdef DEBUG_DMA
+#define dev_dbgdma(dev, format, arg...) \
+ dev_printk(KERN_DEBUG , dev , format , ## arg)
+#else
+#define dev_dbgdma(dev, format, arg...) \
+ ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; })
+#endif
+
+#define DRV_NAME "pata_macio"
+#define DRV_VERSION "0.9"
+
+/* Models of macio ATA controller */
+enum {
+ controller_ohare, /* OHare based */
+ controller_heathrow, /* Heathrow/Paddington */
+ controller_kl_ata3, /* KeyLargo ATA-3 */
+ controller_kl_ata4, /* KeyLargo ATA-4 */
+ controller_un_ata6, /* UniNorth2 ATA-6 */
+ controller_k2_ata6, /* K2 ATA-6 */
+ controller_sh_ata6, /* Shasta ATA-6 */
+};
+
+static const char* macio_ata_names[] = {
+ "OHare ATA", /* OHare based */
+ "Heathrow ATA", /* Heathrow/Paddington */
+ "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
+ "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
+ "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
+ "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
+ "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
+};
+
+/*
+ * Extra registers, both 32-bit little-endian
+ */
+#define IDE_TIMING_CONFIG 0x200
+#define IDE_INTERRUPT 0x300
+
+/* Kauai (U2) ATA has different register setup */
+#define IDE_KAUAI_PIO_CONFIG 0x200
+#define IDE_KAUAI_ULTRA_CONFIG 0x210
+#define IDE_KAUAI_POLL_CONFIG 0x220
+
+/*
+ * Timing configuration register definitions
+ */
+
+/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
+#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
+#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
+#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
+#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
+
+/* 133Mhz cell, found in shasta.
+ * See comments about 100 Mhz Uninorth 2...
+ * Note that PIO_MASK and MDMA_MASK seem to overlap, that's just
+ * weird and I don't now why .. at this stage
+ */
+#define TR_133_PIOREG_PIO_MASK 0xff000fff
+#define TR_133_PIOREG_MDMA_MASK 0x00fff800
+#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
+#define TR_133_UDMAREG_UDMA_EN 0x00000001
+
+/* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device
+ * (106b/0033) on uninorth or K2 internal PCI bus and it's clock is
+ * controlled like gem or fw. It appears to be an evolution of keylargo
+ * ATA4 with a timing register extended to 2x32bits registers (one
+ * for PIO & MWDMA and one for UDMA, and a similar DBDMA channel.
+ * It has it's own local feature control register as well.
+ *
+ * After scratching my mind over the timing values, at least for PIO
+ * and MDMA, I think I've figured the format of the timing register,
+ * though I use pre-calculated tables for UDMA as usual...
+ */
+#define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */
+#define TR_100_PIO_ADDRSETUP_SHIFT 24
+#define TR_100_MDMA_MASK 0x00fff000
+#define TR_100_MDMA_RECOVERY_MASK 0x00fc0000
+#define TR_100_MDMA_RECOVERY_SHIFT 18
+#define TR_100_MDMA_ACCESS_MASK 0x0003f000
+#define TR_100_MDMA_ACCESS_SHIFT 12
+#define TR_100_PIO_MASK 0xff000fff
+#define TR_100_PIO_RECOVERY_MASK 0x00000fc0
+#define TR_100_PIO_RECOVERY_SHIFT 6
+#define TR_100_PIO_ACCESS_MASK 0x0000003f
+#define TR_100_PIO_ACCESS_SHIFT 0
+
+#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
+#define TR_100_UDMAREG_UDMA_EN 0x00000001
+
+
+/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
+ * 40 connector cable and to 4 on 80 connector one.
+ * Clock unit is 15ns (66Mhz)
+ *
+ * 3 Values can be programmed:
+ * - Write data setup, which appears to match the cycle time. They
+ * also call it DIOW setup.
+ * - Ready to pause time (from spec)
+ * - Address setup. That one is weird. I don't see where exactly
+ * it fits in UDMA cycles, I got it's name from an obscure piece
+ * of commented out code in Darwin. They leave it to 0, we do as
+ * well, despite a comment that would lead to think it has a
+ * min value of 45ns.
+ * Apple also add 60ns to the write data setup (or cycle time ?) on
+ * reads.
+ */
+#define TR_66_UDMA_MASK 0xfff00000
+#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
+#define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */
+#define TR_66_PIO_ADDRSETUP_SHIFT 29
+#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
+#define TR_66_UDMA_RDY2PAUS_SHIFT 25
+#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
+#define TR_66_UDMA_WRDATASETUP_SHIFT 21
+#define TR_66_MDMA_MASK 0x000ffc00
+#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
+#define TR_66_MDMA_RECOVERY_SHIFT 15
+#define TR_66_MDMA_ACCESS_MASK 0x00007c00
+#define TR_66_MDMA_ACCESS_SHIFT 10
+#define TR_66_PIO_MASK 0xe00003ff
+#define TR_66_PIO_RECOVERY_MASK 0x000003e0
+#define TR_66_PIO_RECOVERY_SHIFT 5
+#define TR_66_PIO_ACCESS_MASK 0x0000001f
+#define TR_66_PIO_ACCESS_SHIFT 0
+
+/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
+ * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
+ *
+ * The access time and recovery time can be programmed. Some older
+ * Darwin code base limit OHare to 150ns cycle time. I decided to do
+ * the same here fore safety against broken old hardware ;)
+ * The HalfTick bit, when set, adds half a clock (15ns) to the access
+ * time and removes one from recovery. It's not supported on KeyLargo
+ * implementation afaik. The E bit appears to be set for PIO mode 0 and
+ * is used to reach long timings used in this mode.
+ */
+#define TR_33_MDMA_MASK 0x003ff800
+#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
+#define TR_33_MDMA_RECOVERY_SHIFT 16
+#define TR_33_MDMA_ACCESS_MASK 0x0000f800
+#define TR_33_MDMA_ACCESS_SHIFT 11
+#define TR_33_MDMA_HALFTICK 0x00200000
+#define TR_33_PIO_MASK 0x000007ff
+#define TR_33_PIO_E 0x00000400
+#define TR_33_PIO_RECOVERY_MASK 0x000003e0
+#define TR_33_PIO_RECOVERY_SHIFT 5
+#define TR_33_PIO_ACCESS_MASK 0x0000001f
+#define TR_33_PIO_ACCESS_SHIFT 0
+
+/*
+ * Interrupt register definitions. Only present on newer cells
+ * (Keylargo and later afaik) so we don't use it.
+ */
+#define IDE_INTR_DMA 0x80000000
+#define IDE_INTR_DEVICE 0x40000000
+
+/*
+ * FCR Register on Kauai. Not sure what bit 0x4 is ...
+ */
+#define KAUAI_FCR_UATA_MAGIC 0x00000004
+#define KAUAI_FCR_UATA_RESET_N 0x00000002
+#define KAUAI_FCR_UATA_ENABLE 0x00000001
+
+
+/* Allow up to 256 DBDMA commands per xfer */
+#define MAX_DCMDS 256
+
+/* Don't let a DMA segment go all the way to 64K */
+#define MAX_DBDMA_SEG 0xff00
+
+
+/*
+ * Wait 1s for disk to answer on IDE bus after a hard reset
+ * of the device (via GPIO/FCR).
+ *
+ * Some devices seem to "pollute" the bus even after dropping
+ * the BSY bit (typically some combo drives slave on the UDMA
+ * bus) after a hard reset. Since we hard reset all drives on
+ * KeyLargo ATA66, we have to keep that delay around. I may end
+ * up not hard resetting anymore on these and keep the delay only
+ * for older interfaces instead (we have to reset when coming
+ * from MacOS...) --BenH.
+ */
+#define IDE_WAKEUP_DELAY_MS 1000
+
+struct pata_macio_timing;
+
+struct pata_macio_priv {
+ int kind;
+ int aapl_bus_id;
+ int mediabay : 1;
+ struct device_node *node;
+ struct macio_dev *mdev;
+ struct pci_dev *pdev;
+ struct device *dev;
+ int irq;
+ u32 treg[2][2];
+ void __iomem *tfregs;
+ void __iomem *kauai_fcr;
+ struct dbdma_cmd * dma_table_cpu;
+ dma_addr_t dma_table_dma;
+ struct ata_host *host;
+ const struct pata_macio_timing *timings;
+};
+
+/* Previous variants of this driver used to calculate timings
+ * for various variants of the chip and use tables for others.
+ *
+ * Not only was this confusing, but in addition, it isn't clear
+ * whether our calculation code was correct. It didn't entirely
+ * match the darwin code and whatever documentation I could find
+ * on these cells
+ *
+ * I decided to entirely rely on a table instead for this version
+ * of the driver. Also, because I don't really care about derated
+ * modes and really old HW other than making it work, I'm not going
+ * to calculate / snoop timing values for something else than the
+ * standard modes.
+ */
+struct pata_macio_timing {
+ int mode;
+ u32 reg1; /* Bits to set in first timing reg */
+ u32 reg2; /* Bits to set in second timing reg */
+};
+
+static const struct pata_macio_timing pata_macio_ohare_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00074000, 0, },
+ { XFER_MW_DMA_1, 0x00221000, 0, },
+ { XFER_MW_DMA_2, 0x00211000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_heathrow_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00074000, 0, },
+ { XFER_MW_DMA_1, 0x00221000, 0, },
+ { XFER_MW_DMA_2, 0x00211000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kl33_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00084000, 0, },
+ { XFER_MW_DMA_1, 0x00021800, 0, },
+ { XFER_MW_DMA_2, 0x00011800, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kl66_timings[] = {
+ { XFER_PIO_0, 0x0000038c, 0, },
+ { XFER_PIO_1, 0x0000020a, 0, },
+ { XFER_PIO_2, 0x00000127, 0, },
+ { XFER_PIO_3, 0x000000c6, 0, },
+ { XFER_PIO_4, 0x00000065, 0, },
+ { XFER_MW_DMA_0, 0x00084000, 0, },
+ { XFER_MW_DMA_1, 0x00029800, 0, },
+ { XFER_MW_DMA_2, 0x00019400, 0, },
+ { XFER_UDMA_0, 0x19100000, 0, },
+ { XFER_UDMA_1, 0x14d00000, 0, },
+ { XFER_UDMA_2, 0x10900000, 0, },
+ { XFER_UDMA_3, 0x0c700000, 0, },
+ { XFER_UDMA_4, 0x0c500000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kauai_timings[] = {
+ { XFER_PIO_0, 0x08000a92, 0, },
+ { XFER_PIO_1, 0x0800060f, 0, },
+ { XFER_PIO_2, 0x0800038b, 0, },
+ { XFER_PIO_3, 0x05000249, 0, },
+ { XFER_PIO_4, 0x04000148, 0, },
+ { XFER_MW_DMA_0, 0x00618000, 0, },
+ { XFER_MW_DMA_1, 0x00209000, 0, },
+ { XFER_MW_DMA_2, 0x00148000, 0, },
+ { XFER_UDMA_0, 0, 0x000070c1, },
+ { XFER_UDMA_1, 0, 0x00005d81, },
+ { XFER_UDMA_2, 0, 0x00004a61, },
+ { XFER_UDMA_3, 0, 0x00003a51, },
+ { XFER_UDMA_4, 0, 0x00002a31, },
+ { XFER_UDMA_5, 0, 0x00002921, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_shasta_timings[] = {
+ { XFER_PIO_0, 0x0a000c97, 0, },
+ { XFER_PIO_1, 0x07000712, 0, },
+ { XFER_PIO_2, 0x040003cd, 0, },
+ { XFER_PIO_3, 0x0500028b, 0, },
+ { XFER_PIO_4, 0x0400010a, 0, },
+ { XFER_MW_DMA_0, 0x00820800, 0, },
+ { XFER_MW_DMA_1, 0x0028b000, 0, },
+ { XFER_MW_DMA_2, 0x001ca000, 0, },
+ { XFER_UDMA_0, 0, 0x00035901, },
+ { XFER_UDMA_1, 0, 0x000348b1, },
+ { XFER_UDMA_2, 0, 0x00033881, },
+ { XFER_UDMA_3, 0, 0x00033861, },
+ { XFER_UDMA_4, 0, 0x00033841, },
+ { XFER_UDMA_5, 0, 0x00033031, },
+ { XFER_UDMA_6, 0, 0x00033021, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing *pata_macio_find_timing(
+ struct pata_macio_priv *priv,
+ int mode)
+{
+ int i;
+
+ for (i = 0; priv->timings[i].mode > 0; i++) {
+ if (priv->timings[i].mode == mode)
+ return &priv->timings[i];
+ }
+ return NULL;
+}
+
+
+static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ void __iomem *rbase = ap->ioaddr.cmd_addr;
+
+ if (priv->kind == controller_sh_ata6 ||
+ priv->kind == controller_un_ata6 ||
+ priv->kind == controller_k2_ata6) {
+ writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG);
+ writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG);
+ } else
+ writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG);
+}
+
+static void pata_macio_dev_select(struct ata_port *ap, unsigned int device)
+{
+ ata_sff_dev_select(ap, device);
+
+ /* Apply timings */
+ pata_macio_apply_timings(ap, device);
+}
+
+static void pata_macio_set_timings(struct ata_port *ap,
+ struct ata_device *adev)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ const struct pata_macio_timing *t;
+
+ dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n",
+ adev->devno,
+ adev->pio_mode,
+ ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)),
+ adev->dma_mode,
+ ata_mode_string(ata_xfer_mode2mask(adev->dma_mode)));
+
+ /* First clear timings */
+ priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0;
+
+ /* Now get the PIO timings */
+ t = pata_macio_find_timing(priv, adev->pio_mode);
+ if (t == NULL) {
+ dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n",
+ adev->pio_mode);
+ t = pata_macio_find_timing(priv, XFER_PIO_0);
+ }
+ BUG_ON(t == NULL);
+
+ /* PIO timings only ever use the first treg */
+ priv->treg[adev->devno][0] |= t->reg1;
+
+ /* Now get DMA timings */
+ t = pata_macio_find_timing(priv, adev->dma_mode);
+ if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) {
+ dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n");
+ t = pata_macio_find_timing(priv, XFER_MW_DMA_0);
+ }
+ BUG_ON(t == NULL);
+
+ /* DMA timings can use both tregs */
+ priv->treg[adev->devno][0] |= t->reg1;
+ priv->treg[adev->devno][1] |= t->reg2;
+
+ dev_dbg(priv->dev, " -> %08x %08x\n",
+ priv->treg[adev->devno][0],
+ priv->treg[adev->devno][1]);
+
+ /* Apply to hardware */
+ pata_macio_apply_timings(ap, adev->devno);
+}
+
+/*
+ * Blast some well known "safe" values to the timing registers at init or
+ * wakeup from sleep time, before we do real calculation
+ */
+static void pata_macio_default_timings(struct pata_macio_priv *priv)
+{
+ unsigned int value, value2 = 0;
+
+ switch(priv->kind) {
+ case controller_sh_ata6:
+ value = 0x0a820c97;
+ value2 = 0x00033031;
+ break;
+ case controller_un_ata6:
+ case controller_k2_ata6:
+ value = 0x08618a92;
+ value2 = 0x00002921;
+ break;
+ case controller_kl_ata4:
+ value = 0x0008438c;
+ break;
+ case controller_kl_ata3:
+ value = 0x00084526;
+ break;
+ case controller_heathrow:
+ case controller_ohare:
+ default:
+ value = 0x00074526;
+ break;
+ }
+ priv->treg[0][0] = priv->treg[1][0] = value;
+ priv->treg[0][1] = priv->treg[1][1] = value2;
+}
+
+static int pata_macio_cable_detect(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ /* Get cable type from device-tree */
+ if (priv->kind == controller_kl_ata4 ||
+ priv->kind == controller_un_ata6 ||
+ priv->kind == controller_k2_ata6 ||
+ priv->kind == controller_sh_ata6) {
+ const char* cable = of_get_property(priv->node, "cable-type",
+ NULL);
+ struct device_node *root = of_find_node_by_path("/");
+ const char *model = of_get_property(root, "model", NULL);
+
+ if (cable && !strncmp(cable, "80-", 3)) {
+ /* Some drives fail to detect 80c cable in PowerBook
+ * These machine use proprietary short IDE cable
+ * anyway
+ */
+ if (!strncmp(model, "PowerBook", 9))
+ return ATA_CBL_PATA40_SHORT;
+ else
+ return ATA_CBL_PATA80;
+ }
+ }
+
+ /* G5's seem to have incorrect cable type in device-tree.
+ * Let's assume they always have a 80 conductor cable, this seem to
+ * be always the case unless the user mucked around
+ */
+ if (of_device_is_compatible(priv->node, "K2-UATA") ||
+ of_device_is_compatible(priv->node, "shasta-ata"))
+ return ATA_CBL_PATA80;
+
+ /* Anything else is 40 connectors */
+ return ATA_CBL_PATA40;
+}
+
+static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
+{
+ unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct scatterlist *sg;
+ struct dbdma_cmd *table;
+ unsigned int si, pi;
+
+ dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n",
+ __func__, qc, qc->flags, write, qc->dev->devno);
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ table = (struct dbdma_cmd *) priv->dma_table_cpu;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ /* table overflow should never happen */
+ BUG_ON (pi++ >= MAX_DCMDS);
+
+ len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG;
+ st_le16(&table->command, write ? OUTPUT_MORE: INPUT_MORE);
+ st_le16(&table->req_count, len);
+ st_le32(&table->phy_addr, addr);
+ table->cmd_dep = 0;
+ table->xfer_status = 0;
+ table->res_count = 0;
+ addr += len;
+ sg_len -= len;
+ ++table;
+ }
+ }
+
+ /* Should never happen according to Tejun */
+ BUG_ON(!pi);
+
+ /* Convert the last command to an input/output */
+ table--;
+ st_le16(&table->command, write ? OUTPUT_LAST: INPUT_LAST);
+ table++;
+
+ /* Add the stop command to the end of the list */
+ memset(table, 0, sizeof(struct dbdma_cmd));
+ st_le16(&table->command, DBDMA_STOP);
+
+ dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi);
+}
+
+
+static void pata_macio_freeze(struct ata_port *ap)
+{
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+
+ if (dma_regs) {
+ unsigned int timeout = 1000000;
+
+ /* Make sure DMA controller is stopped */
+ writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control);
+ while (--timeout && (readl(&dma_regs->status) & RUN))
+ udelay(1);
+ }
+
+ ata_sff_freeze(ap);
+}
+
+
+static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ int dev = qc->dev->devno;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ /* Make sure DMA commands updates are visible */
+ writel(priv->dma_table_dma, &dma_regs->cmdptr);
+
+ /* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on
+ * UDMA reads
+ */
+ if (priv->kind == controller_kl_ata4 &&
+ (priv->treg[dev][0] & TR_66_UDMA_EN)) {
+ void __iomem *rbase = ap->ioaddr.cmd_addr;
+ u32 reg = priv->treg[dev][0];
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ reg += 0x00800000;
+ writel(reg, rbase + IDE_TIMING_CONFIG);
+ }
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+static void pata_macio_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ writel((RUN << 16) | RUN, &dma_regs->control);
+ /* Make sure it gets to the controller right now */
+ (void)readl(&dma_regs->control);
+}
+
+static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ unsigned int timeout = 1000000;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ /* Stop the DMA engine and wait for it to full halt */
+ writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control);
+ while (--timeout && (readl(&dma_regs->status) & RUN))
+ udelay(1);
+}
+
+static u8 pata_macio_bmdma_status(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ u32 dstat, rstat = ATA_DMA_INTR;
+ unsigned long timeout = 0;
+
+ dstat = readl(&dma_regs->status);
+
+ dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat);
+
+ /* We have two things to deal with here:
+ *
+ * - The dbdma won't stop if the command was started
+ * but completed with an error without transferring all
+ * datas. This happens when bad blocks are met during
+ * a multi-block transfer.
+ *
+ * - The dbdma fifo hasn't yet finished flushing to
+ * to system memory when the disk interrupt occurs.
+ *
+ */
+
+ /* First check for errors */
+ if ((dstat & (RUN|DEAD)) != RUN)
+ rstat |= ATA_DMA_ERR;
+
+ /* If ACTIVE is cleared, the STOP command has been hit and
+ * the transfer is complete. If not, we have to flush the
+ * channel.
+ */
+ if ((dstat & ACTIVE) == 0)
+ return rstat;
+
+ dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set. We consider that we aren't
+ * sharing interrupts (which is hopefully the case with
+ * those controllers) and so we just try to flush the
+ * channel for pending data in the fifo
+ */
+ udelay(1);
+ writel((FLUSH << 16) | FLUSH, &dma_regs->control);
+ for (;;) {
+ udelay(1);
+ dstat = readl(&dma_regs->status);
+ if ((dstat & FLUSH) == 0)
+ break;
+ if (++timeout > 1000) {
+ dev_warn(priv->dev, "timeout flushing DMA\n");
+ rstat |= ATA_DMA_ERR;
+ break;
+ }
+ }
+ return rstat;
+}
+
+/* port_start is when we allocate the DMA command list */
+static int pata_macio_port_start(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ if (ap->ioaddr.bmdma_addr == NULL)
+ return 0;
+
+ /* Allocate space for the DBDMA commands.
+ *
+ * The +2 is +1 for the stop command and +1 to allow for
+ * aligning the start address to a multiple of 16 bytes.
+ */
+ priv->dma_table_cpu =
+ dmam_alloc_coherent(priv->dev,
+ (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
+ &priv->dma_table_dma, GFP_KERNEL);
+ if (priv->dma_table_cpu == NULL) {
+ dev_err(priv->dev, "Unable to allocate DMA command list\n");
+ ap->ioaddr.bmdma_addr = NULL;
+ }
+ return 0;
+}
+
+static void pata_macio_irq_clear(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ /* Nothing to do here */
+
+ dev_dbgdma(priv->dev, "%s\n", __func__);
+}
+
+static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
+{
+ dev_dbg(priv->dev, "Enabling & resetting... \n");
+
+ if (priv->mediabay)
+ return;
+
+ if (priv->kind == controller_ohare && !resume) {
+ /* The code below is having trouble on some ohare machines
+ * (timing related ?). Until I can put my hand on one of these
+ * units, I keep the old way
+ */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1);
+ } else {
+ int rc;
+
+ /* Reset and enable controller */
+ rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET,
+ priv->node, priv->aapl_bus_id, 1);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE,
+ priv->node, priv->aapl_bus_id, 1);
+ msleep(10);
+ /* Only bother waiting if there's a reset control */
+ if (rc == 0) {
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET,
+ priv->node, priv->aapl_bus_id, 0);
+ msleep(IDE_WAKEUP_DELAY_MS);
+ }
+ }
+
+ /* If resuming a PCI device, restore the config space here */
+ if (priv->pdev && resume) {
+ int rc;
+
+ pci_restore_state(priv->pdev);
+ rc = pcim_enable_device(priv->pdev);
+ if (rc)
+ dev_printk(KERN_ERR, &priv->pdev->dev,
+ "Failed to enable device after resume (%d)\n", rc);
+ else
+ pci_set_master(priv->pdev);
+ }
+
+ /* On Kauai, initialize the FCR. We don't perform a reset, doesn't really
+ * seem necessary and speeds up the boot process
+ */
+ if (priv->kauai_fcr)
+ writel(KAUAI_FCR_UATA_MAGIC |
+ KAUAI_FCR_UATA_RESET_N |
+ KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr);
+}
+
+/* Hook the standard slave config to fixup some HW related alignment
+ * restrictions
+ */
+static int pata_macio_slave_config(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct pata_macio_priv *priv = ap->private_data;
+ struct ata_device *dev;
+ u16 cmd;
+ int rc;
+
+ /* First call original */
+ rc = ata_scsi_slave_config(sdev);
+ if (rc)
+ return rc;
+
+ /* This is lifted from sata_nv */
+ dev = &ap->link.device[sdev->id];
+
+ /* OHare has issues with non cache aligned DMA on some chipsets */
+ if (priv->kind == controller_ohare) {
+ blk_queue_update_dma_alignment(sdev->request_queue, 31);
+ blk_queue_update_dma_pad(sdev->request_queue, 31);
+
+ /* Tell the world about it */
+ ata_dev_printk(dev, KERN_INFO, "OHare alignment limits applied\n");
+ return 0;
+ }
+
+ /* We only have issues with ATAPI */
+ if (dev->class != ATA_DEV_ATAPI)
+ return 0;
+
+ /* Shasta and K2 seem to have "issues" with reads ... */
+ if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
+ /* Allright these are bad, apply restrictions */
+ blk_queue_update_dma_alignment(sdev->request_queue, 15);
+ blk_queue_update_dma_pad(sdev->request_queue, 15);
+
+ /* We enable MWI and hack cache line size directly here, this
+ * is specific to this chipset and not normal values, we happen
+ * to somewhat know what we are doing here (which is basically
+ * to do the same Apple does and pray they did not get it wrong :-)
+ */
+ BUG_ON(!priv->pdev);
+ pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08);
+ pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd);
+ pci_write_config_word(priv->pdev, PCI_COMMAND,
+ cmd | PCI_COMMAND_INVALIDATE);
+
+ /* Tell the world about it */
+ ata_dev_printk(dev, KERN_INFO,
+ "K2/Shasta alignment limits applied\n");
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg)
+{
+ int rc;
+
+ /* First, core libata suspend to do most of the work */
+ rc = ata_host_suspend(priv->host, mesg);
+ if (rc)
+ return rc;
+
+ /* Restore to default timings */
+ pata_macio_default_timings(priv);
+
+ /* Mask interrupt. Not strictly necessary but old driver did
+ * it and I'd rather not change that here */
+ disable_irq(priv->irq);
+
+ /* The media bay will handle itself just fine */
+ if (priv->mediabay)
+ return 0;
+
+ /* Kauai has bus control FCRs directly here */
+ if (priv->kauai_fcr) {
+ u32 fcr = readl(priv->kauai_fcr);
+ fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
+ writel(fcr, priv->kauai_fcr);
+ }
+
+ /* For PCI, save state and disable DMA. No need to call
+ * pci_set_power_state(), the HW doesn't do D states that
+ * way, the platform code will take care of suspending the
+ * ASIC properly
+ */
+ if (priv->pdev) {
+ pci_save_state(priv->pdev);
+ pci_disable_device(priv->pdev);
+ }
+
+ /* Disable the bus on older machines and the cell on kauai */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node,
+ priv->aapl_bus_id, 0);
+
+ return 0;
+}
+
+static int pata_macio_do_resume(struct pata_macio_priv *priv)
+{
+ /* Reset and re-enable the HW */
+ pata_macio_reset_hw(priv, 1);
+
+ /* Sanitize drive timings */
+ pata_macio_apply_timings(priv->host->ports[0], 0);
+
+ /* We want our IRQ back ! */
+ enable_irq(priv->irq);
+
+ /* Let the libata core take it from there */
+ ata_host_resume(priv->host);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct scsi_host_template pata_macio_sht = {
+ ATA_BASE_SHT(DRV_NAME),
+ .sg_tablesize = MAX_DCMDS,
+ /* We may not need that strict one */
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = pata_macio_slave_config,
+};
+
+static struct ata_port_operations pata_macio_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .freeze = pata_macio_freeze,
+ .set_piomode = pata_macio_set_timings,
+ .set_dmamode = pata_macio_set_timings,
+ .cable_detect = pata_macio_cable_detect,
+ .sff_dev_select = pata_macio_dev_select,
+ .qc_prep = pata_macio_qc_prep,
+ .mode_filter = ata_bmdma_mode_filter,
+ .bmdma_setup = pata_macio_bmdma_setup,
+ .bmdma_start = pata_macio_bmdma_start,
+ .bmdma_stop = pata_macio_bmdma_stop,
+ .bmdma_status = pata_macio_bmdma_status,
+ .port_start = pata_macio_port_start,
+ .sff_irq_clear = pata_macio_irq_clear,
+};
+
+static void __devinit pata_macio_invariants(struct pata_macio_priv *priv)
+{
+ const int *bidp;
+
+ /* Identify the type of controller */
+ if (of_device_is_compatible(priv->node, "shasta-ata")) {
+ priv->kind = controller_sh_ata6;
+ priv->timings = pata_macio_shasta_timings;
+ } else if (of_device_is_compatible(priv->node, "kauai-ata")) {
+ priv->kind = controller_un_ata6;
+ priv->timings = pata_macio_kauai_timings;
+ } else if (of_device_is_compatible(priv->node, "K2-UATA")) {
+ priv->kind = controller_k2_ata6;
+ priv->timings = pata_macio_kauai_timings;
+ } else if (of_device_is_compatible(priv->node, "keylargo-ata")) {
+ if (strcmp(priv->node->name, "ata-4") == 0) {
+ priv->kind = controller_kl_ata4;
+ priv->timings = pata_macio_kl66_timings;
+ } else {
+ priv->kind = controller_kl_ata3;
+ priv->timings = pata_macio_kl33_timings;
+ }
+ } else if (of_device_is_compatible(priv->node, "heathrow-ata")) {
+ priv->kind = controller_heathrow;
+ priv->timings = pata_macio_heathrow_timings;
+ } else {
+ priv->kind = controller_ohare;
+ priv->timings = pata_macio_ohare_timings;
+ }
+
+ /* XXX FIXME --- setup priv->mediabay here */
+
+ /* Get Apple bus ID (for clock and ASIC control) */
+ bidp = of_get_property(priv->node, "AAPL,bus-id", NULL);
+ priv->aapl_bus_id = bidp ? *bidp : 0;
+
+ /* Fixup missing Apple bus ID in case of media-bay */
+ if (priv->mediabay && bidp == 0)
+ priv->aapl_bus_id = 1;
+}
+
+static void __devinit pata_macio_setup_ios(struct ata_ioports *ioaddr,
+ void __iomem * base,
+ void __iomem * dma)
+{
+ /* cmd_addr is the base of regs for that port */
+ ioaddr->cmd_addr = base;
+
+ /* taskfile registers */
+ ioaddr->data_addr = base + (ATA_REG_DATA << 4);
+ ioaddr->error_addr = base + (ATA_REG_ERR << 4);
+ ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4);
+ ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4);
+ ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4);
+ ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4);
+ ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4);
+ ioaddr->device_addr = base + (ATA_REG_DEVICE << 4);
+ ioaddr->status_addr = base + (ATA_REG_STATUS << 4);
+ ioaddr->command_addr = base + (ATA_REG_CMD << 4);
+ ioaddr->altstatus_addr = base + 0x160;
+ ioaddr->ctl_addr = base + 0x160;
+ ioaddr->bmdma_addr = dma;
+}
+
+static void __devinit pmac_macio_calc_timing_masks(struct pata_macio_priv *priv,
+ struct ata_port_info *pinfo)
+{
+ int i = 0;
+
+ pinfo->pio_mask = 0;
+ pinfo->mwdma_mask = 0;
+ pinfo->udma_mask = 0;
+
+ while (priv->timings[i].mode > 0) {
+ unsigned int mask = 1U << (priv->timings[i].mode & 0x0f);
+ switch(priv->timings[i].mode & 0xf0) {
+ case 0x00: /* PIO */
+ pinfo->pio_mask |= (mask >> 8);
+ break;
+ case 0x20: /* MWDMA */
+ pinfo->mwdma_mask |= mask;
+ break;
+ case 0x40: /* UDMA */
+ pinfo->udma_mask |= mask;
+ break;
+ }
+ i++;
+ }
+ dev_dbg(priv->dev, "Supported masks: PIO=%lx, MWDMA=%lx, UDMA=%lx\n",
+ pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask);
+}
+
+static int __devinit pata_macio_common_init(struct pata_macio_priv *priv,
+ resource_size_t tfregs,
+ resource_size_t dmaregs,
+ resource_size_t fcregs,
+ unsigned long irq)
+{
+ struct ata_port_info pinfo;
+ const struct ata_port_info *ppi[] = { &pinfo, NULL };
+ void __iomem *dma_regs = NULL;
+
+ /* Fill up privates with various invariants collected from the
+ * device-tree
+ */
+ pata_macio_invariants(priv);
+
+ /* Make sure we have sane initial timings in the cache */
+ pata_macio_default_timings(priv);
+
+ /* Not sure what the real max is but we know it's less than 64K, let's
+ * use 64K minus 256
+ */
+ dma_set_max_seg_size(priv->dev, MAX_DBDMA_SEG);
+
+ /* Allocate libata host for 1 port */
+ memset(&pinfo, 0, sizeof(struct ata_port_info));
+ pmac_macio_calc_timing_masks(priv, &pinfo);
+ pinfo.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO |
+ ATA_FLAG_NO_LEGACY;
+ pinfo.port_ops = &pata_macio_ops;
+ pinfo.private_data = priv;
+
+ priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1);
+ if (priv->host == NULL) {
+ dev_err(priv->dev, "Failed to allocate ATA port structure\n");
+ return -ENOMEM;
+ }
+
+ /* Setup the private data in host too */
+ priv->host->private_data = priv;
+
+ /* Map base registers */
+ priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100);
+ if (priv->tfregs == NULL) {
+ dev_err(priv->dev, "Failed to map ATA ports\n");
+ return -ENOMEM;
+ }
+ priv->host->iomap = &priv->tfregs;
+
+ /* Map DMA regs */
+ if (dmaregs != 0) {
+ dma_regs = devm_ioremap(priv->dev, dmaregs,
+ sizeof(struct dbdma_regs));
+ if (dma_regs == NULL)
+ dev_warn(priv->dev, "Failed to map ATA DMA registers\n");
+ }
+
+ /* If chip has local feature control, map those regs too */
+ if (fcregs != 0) {
+ priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4);
+ if (priv->kauai_fcr == NULL) {
+ dev_err(priv->dev, "Failed to map ATA FCR register\n");
+ return -ENOMEM;
+ }
+ }
+
+ /* Setup port data structure */
+ pata_macio_setup_ios(&priv->host->ports[0]->ioaddr,
+ priv->tfregs, dma_regs);
+ priv->host->ports[0]->private_data = priv;
+
+ /* hard-reset the controller */
+ pata_macio_reset_hw(priv, 0);
+ pata_macio_apply_timings(priv->host->ports[0], 0);
+
+ /* Enable bus master if necessary */
+ if (priv->pdev && dma_regs)
+ pci_set_master(priv->pdev);
+
+ dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n",
+ macio_ata_names[priv->kind], priv->aapl_bus_id);
+
+ /* Start it up */
+ priv->irq = irq;
+ return ata_host_activate(priv->host, irq, ata_sff_interrupt, 0,
+ &pata_macio_sht);
+}
+
+static int __devinit pata_macio_attach(struct macio_dev *mdev,
+ const struct of_device_id *match)
+{
+ struct pata_macio_priv *priv;
+ resource_size_t tfregs, dmaregs = 0;
+ unsigned long irq;
+ int rc;
+
+ /* Check for broken device-trees */
+ if (macio_resource_count(mdev) == 0) {
+ dev_err(&mdev->ofdev.dev,
+ "No addresses for controller\n");
+ return -ENXIO;
+ }
+
+ /* Enable managed resources */
+ macio_enable_devres(mdev);
+
+ /* Allocate and init private data structure */
+ priv = devm_kzalloc(&mdev->ofdev.dev,
+ sizeof(struct pata_macio_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&mdev->ofdev.dev,
+ "Failed to allocate private memory\n");
+ return -ENOMEM;
+ }
+ priv->node = of_node_get(mdev->ofdev.node);
+ priv->mdev = mdev;
+ priv->dev = &mdev->ofdev.dev;
+
+ /* Request memory resource for taskfile registers */
+ if (macio_request_resource(mdev, 0, "pata-macio")) {
+ dev_err(&mdev->ofdev.dev,
+ "Cannot obtain taskfile resource\n");
+ return -EBUSY;
+ }
+ tfregs = macio_resource_start(mdev, 0);
+
+ /* Request resources for DMA registers if any */
+ if (macio_resource_count(mdev) >= 2) {
+ if (macio_request_resource(mdev, 1, "pata-macio-dma"))
+ dev_err(&mdev->ofdev.dev,
+ "Cannot obtain DMA resource\n");
+ else
+ dmaregs = macio_resource_start(mdev, 1);
+ }
+
+ /*
+ * Fixup missing IRQ for some old implementations with broken
+ * device-trees.
+ *
+ * This is a bit bogus, it should be fixed in the device-tree itself,
+ * via the existing macio fixups, based on the type of interrupt
+ * controller in the machine. However, I have no test HW for this case,
+ * and this trick works well enough on those old machines...
+ */
+ if (macio_irq_count(mdev) == 0) {
+ dev_warn(&mdev->ofdev.dev,
+ "No interrupts for controller, using 13\n");
+ irq = irq_create_mapping(NULL, 13);
+ } else
+ irq = macio_irq(mdev, 0);
+
+ /* Prevvent media bay callbacks until fully registered */
+ lock_media_bay(priv->mdev->media_bay);
+
+ /* Get register addresses and call common initialization */
+ rc = pata_macio_common_init(priv,
+ tfregs, /* Taskfile regs */
+ dmaregs, /* DBDMA regs */
+ 0, /* Feature control */
+ irq);
+ unlock_media_bay(priv->mdev->media_bay);
+
+ return rc;
+}
+
+static int __devexit pata_macio_detach(struct macio_dev *mdev)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+ struct pata_macio_priv *priv = host->private_data;
+
+ lock_media_bay(priv->mdev->media_bay);
+
+ /* Make sure the mediabay callback doesn't try to access
+ * dead stuff
+ */
+ priv->host->private_data = NULL;
+
+ ata_host_detach(host);
+
+ unlock_media_bay(priv->mdev->media_bay);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+
+ return pata_macio_do_suspend(host->private_data, mesg);
+}
+
+static int pata_macio_resume(struct macio_dev *mdev)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+
+ return pata_macio_do_resume(host->private_data);
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PMAC_MEDIABAY
+static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+ struct ata_port *ap;
+ struct ata_eh_info *ehi;
+ struct ata_device *dev;
+ unsigned long flags;
+
+ if (!host || !host->private_data)
+ return;
+ ap = host->ports[0];
+ spin_lock_irqsave(ap->lock, flags);
+ ehi = &ap->link.eh_info;
+ if (mb_state == MB_CD) {
+ ata_ehi_push_desc(ehi, "mediabay plug");
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+ } else {
+ ata_ehi_push_desc(ehi, "mediabay unplug");
+ ata_for_each_dev(dev, &ap->link, ALL)
+ dev->flags |= ATA_DFLAG_DETACH;
+ ata_port_abort(ap);
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+}
+#endif /* CONFIG_PMAC_MEDIABAY */
+
+
+static int __devinit pata_macio_pci_attach(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct pata_macio_priv *priv;
+ struct device_node *np;
+ resource_size_t rbase;
+
+ /* We cannot use a MacIO controller without its OF device node */
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL) {
+ dev_err(&pdev->dev,
+ "Cannot find OF device node for controller\n");
+ return -ENODEV;
+ }
+
+ /* Check that it can be enabled */
+ if (pcim_enable_device(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot enable controller PCI device\n");
+ return -ENXIO;
+ }
+
+ /* Allocate and init private data structure */
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof(struct pata_macio_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&pdev->dev,
+ "Failed to allocate private memory\n");
+ return -ENOMEM;
+ }
+ priv->node = of_node_get(np);
+ priv->pdev = pdev;
+ priv->dev = &pdev->dev;
+
+ /* Get MMIO regions */
+ if (pci_request_regions(pdev, "pata-macio")) {
+ dev_err(&pdev->dev,
+ "Cannot obtain PCI resources\n");
+ return -EBUSY;
+ }
+
+ /* Get register addresses and call common initialization */
+ rbase = pci_resource_start(pdev, 0);
+ if (pata_macio_common_init(priv,
+ rbase + 0x2000, /* Taskfile regs */
+ rbase + 0x1000, /* DBDMA regs */
+ rbase, /* Feature control */
+ pdev->irq))
+ return -ENXIO;
+
+ return 0;
+}
+
+static void __devexit pata_macio_pci_detach(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ ata_host_detach(host);
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ return pata_macio_do_suspend(host->private_data, mesg);
+}
+
+static int pata_macio_pci_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ return pata_macio_do_resume(host->private_data);
+}
+
+#endif /* CONFIG_PM */
+
+static struct of_device_id pata_macio_match[] =
+{
+ {
+ .name = "IDE",
+ },
+ {
+ .name = "ATA",
+ },
+ {
+ .type = "ide",
+ },
+ {
+ .type = "ata",
+ },
+ {},
+};
+
+static struct macio_driver pata_macio_driver =
+{
+ .name = "pata-macio",
+ .match_table = pata_macio_match,
+ .probe = pata_macio_attach,
+ .remove = pata_macio_detach,
+#ifdef CONFIG_PM
+ .suspend = pata_macio_suspend,
+ .resume = pata_macio_resume,
+#endif
+#ifdef CONFIG_PMAC_MEDIABAY
+ .mediabay_event = pata_macio_mb_event,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+static const struct pci_device_id pata_macio_pci_match[] = {
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
+ {},
+};
+
+static struct pci_driver pata_macio_pci_driver = {
+ .name = "pata-pci-macio",
+ .id_table = pata_macio_pci_match,
+ .probe = pata_macio_pci_attach,
+ .remove = pata_macio_pci_detach,
+#ifdef CONFIG_PM
+ .suspend = pata_macio_pci_suspend,
+ .resume = pata_macio_pci_resume,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+MODULE_DEVICE_TABLE(pci, pata_macio_pci_match);
+
+
+static int __init pata_macio_init(void)
+{
+ int rc;
+
+ if (!machine_is(powermac))
+ return -ENODEV;
+
+ rc = pci_register_driver(&pata_macio_pci_driver);
+ if (rc)
+ return rc;
+ rc = macio_register_driver(&pata_macio_driver);
+ if (rc) {
+ pci_unregister_driver(&pata_macio_pci_driver);
+ return rc;
+ }
+ return 0;
+}
+
+static void __exit pata_macio_exit(void)
+{
+ macio_unregister_driver(&pata_macio_driver);
+ pci_unregister_driver(&pata_macio_pci_driver);
+}
+
+module_init(pata_macio_init);
+module_exit(pata_macio_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt");
+MODULE_DESCRIPTION("Apple MacIO PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);