summaryrefslogtreecommitdiff
path: root/drivers/ata/sata_via.c
diff options
context:
space:
mode:
authorOndrej Zary <linux@rainbow-software.org>2016-02-25 19:22:25 +0300
committerTejun Heo <tj@kernel.org>2016-02-25 21:22:16 +0300
commit57e5568fda276d47fe9b9499ba487066d299e0e7 (patch)
tree5dc31a7c3dbeb8ae7941cc5dbcc2b28963326490 /drivers/ata/sata_via.c
parent44a9b494f20b37dc9c9f94577ff98c856f594b96 (diff)
downloadlinux-57e5568fda276d47fe9b9499ba487066d299e0e7.tar.xz
sata_via: Implement hotplug for VT6421
Enable IRQ on hotplug and add an interrupt handler to handle it. This allows hotplug to work: ata5: exception Emask 0x10 SAct 0x0 SErr 0x70000 action 0xe frozen ata5: SError: { PHYRdyChg PHYInt CommWake } ata5: hard resetting link ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata5.00: LPM support broken, forcing max_power ata5.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133 ata5.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 0/32) ata5.00: LPM support broken, forcing max_power ata5.00: configured for UDMA/133 ata5: EH complete scsi 4:0:0:0: Direct-Access ATA WDC WD800JD-75MS 1E04 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: [sdb] Attached SCSI disk And also hot unplug: ata5: exception Emask 0x10 SAct 0x0 SErr 0x1b0000 action 0xe frozen ata5: SError: { PHYRdyChg PHYInt 10B8B Dispar } ata5: hard resetting link ata5: SATA link down (SStatus 0 SControl 310) ata5: hard resetting link ata5: SATA link down (SStatus 0 SControl 310) ata5: hard resetting link ata5: SATA link down (SStatus 0 SControl 310) ata5.00: disabled ata5: EH complete ata5.00: detaching (SCSI 4:0:0:0) sd 4:0:0:0: [sdb] Synchronizing SCSI cache sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 4:0:0:0: [sdb] Stopping disk sd 4:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/sata_via.c')
-rw-r--r--drivers/ata/sata_via.c52
1 files changed, 50 insertions, 2 deletions
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 9804054e22a7..0636d84fbefe 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -61,6 +61,7 @@ enum {
SATA_CHAN_ENAB = 0x40, /* SATA channel enable */
SATA_INT_GATE = 0x41, /* SATA interrupt gating */
SATA_NATIVE_MODE = 0x42, /* Native mode enable */
+ SVIA_MISC_3 = 0x46, /* Miscellaneous Control III */
PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */
PATA_PIO_TIMING = 0xAB, /* PATA timing register */
@@ -71,6 +72,8 @@ enum {
NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */
+
+ SATA_HOTPLUG = (1 << 5), /* enable IRQ on hotplug */
};
struct svia_priv {
@@ -553,6 +556,37 @@ static void svia_wd_fix(struct pci_dev *pdev)
pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2));
}
+static irqreturn_t vt6421_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance);
+
+ /* if the IRQ was not handled, it might be a hotplug IRQ */
+ if (rc != IRQ_HANDLED) {
+ u32 serror;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ /* check for hotplug on port 0 */
+ svia_scr_read(&host->ports[0]->link, SCR_ERROR, &serror);
+ if (serror & SERR_PHYRDY_CHG) {
+ ata_ehi_hotplugged(&host->ports[0]->link.eh_info);
+ ata_port_freeze(host->ports[0]);
+ rc = IRQ_HANDLED;
+ }
+ /* check for hotplug on port 1 */
+ svia_scr_read(&host->ports[1]->link, SCR_ERROR, &serror);
+ if (serror & SERR_PHYRDY_CHG) {
+ ata_ehi_hotplugged(&host->ports[1]->link.eh_info);
+ ata_port_freeze(host->ports[1]);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
+
+ return rc;
+}
+
static void vt6421_error_handler(struct ata_port *ap)
{
struct svia_priv *hpriv = ap->host->private_data;
@@ -610,6 +644,16 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
+ /* enable IRQ on hotplug */
+ pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
+ if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
+ dev_dbg(&pdev->dev,
+ "enabling SATA hotplug (0x%x)\n",
+ (int) tmp8);
+ tmp8 |= SATA_HOTPLUG;
+ pci_write_config_byte(pdev, SVIA_MISC_3, tmp8);
+ }
+
/*
* vt6420/1 has problems talking to some drives. The following
* is the fix from Joseph Chan <JosephChan@via.com.tw>.
@@ -698,8 +742,12 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
svia_configure(pdev, board_id, hpriv);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
- IRQF_SHARED, &svia_sht);
+ if (board_id == vt6421)
+ return ata_host_activate(host, pdev->irq, vt6421_interrupt,
+ IRQF_SHARED, &svia_sht);
+ else
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
+ IRQF_SHARED, &svia_sht);
}
#ifdef CONFIG_PM_SLEEP