summaryrefslogtreecommitdiff
path: root/drivers/base/regmap
diff options
context:
space:
mode:
authorAkinobu Mita <akinobu.mita@gmail.com>2018-07-16 18:47:48 +0300
committerMark Brown <broonie@kernel.org>2018-07-18 17:45:23 +0300
commitbcf7eac3d97f49d8400ba52c71bee5934bf20093 (patch)
treebfcce867a916da1d43c9c2cbbb78ed76ce226bc4 /drivers/base/regmap
parentce397d215ccd07b8ae3f71db689aedb85d56ab40 (diff)
downloadlinux-bcf7eac3d97f49d8400ba52c71bee5934bf20093.tar.xz
regmap: add SCCB support
This adds Serial Camera Control Bus (SCCB) support for regmap API that is intended to be used by some of Omnivision sensor drivers. The ov772x and ov9650 drivers are going to use this SCCB regmap API. The ov772x driver was previously only worked with the i2c controller drivers that support I2C_FUNC_PROTOCOL_MANGLING, because the ov772x device doesn't support repeated starts. After commit 0b964d183cbf ("media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING"), reading ov772x register is replaced with issuing two separated i2c messages in order to avoid repeated start. Using this SCCB regmap hides the implementation detail. The ov9650 driver also issues two separated i2c messages to read the registers as the device doesn't support repeated start. So it can make use of this SCCB regmap. Cc: Mark Brown <broonie@kernel.org> Cc: Peter Rosin <peda@axentia.se> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/base/regmap')
-rw-r--r--drivers/base/regmap/Kconfig4
-rw-r--r--drivers/base/regmap/Makefile1
-rw-r--r--drivers/base/regmap/regmap-sccb.c128
3 files changed, 133 insertions, 0 deletions
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index aff34c0c2a3e..6ad5ef48b61e 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -45,3 +45,7 @@ config REGMAP_IRQ
config REGMAP_SOUNDWIRE
tristate
depends on SOUNDWIRE_BUS
+
+config REGMAP_SCCB
+ tristate
+ depends on I2C
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index 5ed0023fabda..f5b4e8851d00 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_REGMAP_MMIO) += regmap-mmio.o
obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o
obj-$(CONFIG_REGMAP_W1) += regmap-w1.o
obj-$(CONFIG_REGMAP_SOUNDWIRE) += regmap-sdw.o
+obj-$(CONFIG_REGMAP_SCCB) += regmap-sccb.o
diff --git a/drivers/base/regmap/regmap-sccb.c b/drivers/base/regmap/regmap-sccb.c
new file mode 100644
index 000000000000..b6eb876ea819
--- /dev/null
+++ b/drivers/base/regmap/regmap-sccb.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+// Register map access API - SCCB support
+
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include "internal.h"
+
+/**
+ * sccb_is_available - Check if the adapter supports SCCB protocol
+ * @adap: I2C adapter
+ *
+ * Return true if the I2C adapter is capable of using SCCB helper functions,
+ * false otherwise.
+ */
+static bool sccb_is_available(struct i2c_adapter *adap)
+{
+ u32 needed_funcs = I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+
+ /*
+ * If we ever want support for hardware doing SCCB natively, we will
+ * introduce a sccb_xfer() callback to struct i2c_algorithm and check
+ * for it here.
+ */
+
+ return (i2c_get_functionality(adap) & needed_funcs) == needed_funcs;
+}
+
+/**
+ * regmap_sccb_read - Read data from SCCB slave device
+ * @context: Device that will be interacted wit
+ * @reg: Register to be read from
+ * @val: Pointer to store read value
+ *
+ * This executes the 2-phase write transmission cycle that is followed by a
+ * 2-phase read transmission cycle, returning negative errno else zero on
+ * success.
+ */
+static int regmap_sccb_read(void *context, unsigned int reg, unsigned int *val)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+ int ret;
+ union i2c_smbus_data data;
+
+ i2c_lock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
+
+ ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
+ I2C_SMBUS_WRITE, reg, I2C_SMBUS_BYTE, NULL);
+ if (ret < 0)
+ goto out;
+
+ ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
+ I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &data);
+ if (ret < 0)
+ goto out;
+
+ *val = data.byte;
+out:
+ i2c_unlock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
+
+ return ret;
+}
+
+/**
+ * regmap_sccb_write - Write data to SCCB slave device
+ * @context: Device that will be interacted wit
+ * @reg: Register to write to
+ * @val: Value to be written
+ *
+ * This executes the SCCB 3-phase write transmission cycle, returning negative
+ * errno else zero on success.
+ */
+static int regmap_sccb_write(void *context, unsigned int reg, unsigned int val)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ return i2c_smbus_write_byte_data(i2c, reg, val);
+}
+
+static struct regmap_bus regmap_sccb_bus = {
+ .reg_write = regmap_sccb_write,
+ .reg_read = regmap_sccb_read,
+};
+
+static const struct regmap_bus *regmap_get_sccb_bus(struct i2c_client *i2c,
+ const struct regmap_config *config)
+{
+ if (config->val_bits == 8 && config->reg_bits == 8 &&
+ sccb_is_available(i2c->adapter))
+ return &regmap_sccb_bus;
+
+ return ERR_PTR(-ENOTSUPP);
+}
+
+struct regmap *__regmap_init_sccb(struct i2c_client *i2c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ const struct regmap_bus *bus = regmap_get_sccb_bus(i2c, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __regmap_init(&i2c->dev, bus, &i2c->dev, config,
+ lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__regmap_init_sccb);
+
+struct regmap *__devm_regmap_init_sccb(struct i2c_client *i2c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ const struct regmap_bus *bus = regmap_get_sccb_bus(i2c, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __devm_regmap_init(&i2c->dev, bus, &i2c->dev, config,
+ lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_sccb);
+
+MODULE_LICENSE("GPL v2");