Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM SoC updates from Arnd Bergmann:
 "These are changes that for some reason ended up not making it into the
  first four branches but that should still make it into 6.9:

   - A rework of the omap clock support that touches both drivers and
     device tree files

   - The reset controller branch changes that had a dependency on late
     bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
     drivers branch

   - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
     changes that got delayed and needed some extra time in linux-next
     for wider testing"

* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  soc: fsl: dpio: fix kcalloc() argument order
  bus: ts-nbus: Improve error reporting
  bus: ts-nbus: Convert to atomic pwm API
  riscv: dts: starfive: jh7110: Add camera subsystem nodes
  ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
  ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
  ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
  clk: ti: Improve clksel clock bit parsing for reg property
  clk: ti: Handle possible address in the node name
  dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
  dt-bindings: riscv: cpus: reg matches hart ID
  reset: Instantiate reset GPIO controller for shared reset-gpios
  reset: gpio: Add GPIO-based reset controller
  cpufreq: do not open-code of_phandle_args_equal()
  of: Add of_phandle_args_equal() helper
  reset: simple: add support for Sophgo SG2042
  dt-bindings: reset: sophgo: support SG2042
  riscv: dts: microchip: add specific compatible for mpfs pdma
  riscv: dts: microchip: add missing CAN bus clocks
  ARM: brcmstb: Add debug UART entry for 74165
  ...

2 files changed, 49 insertions, 47 deletions

diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index b6dfe4340da2..65ae758f3194 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -96,6 +96,20 @@ static const int gisb_offsets_bcm7400[] = {
 	[ARB_ERR_CAP_MASTER]	= 0x0d8,
 };
 
+static const int gisb_offsets_bcm74165[] = {
+	[ARB_TIMER]		= 0x008,
+	[ARB_BP_CAP_CLR]	= 0x044,
+	[ARB_BP_CAP_HI_ADDR]	= -1,
+	[ARB_BP_CAP_ADDR]	= 0x048,
+	[ARB_BP_CAP_STATUS]	= 0x058,
+	[ARB_BP_CAP_MASTER]	= 0x05c,
+	[ARB_ERR_CAP_CLR]	= 0x038,
+	[ARB_ERR_CAP_HI_ADDR]	= -1,
+	[ARB_ERR_CAP_ADDR]	= 0x020,
+	[ARB_ERR_CAP_STATUS]	= 0x030,
+	[ARB_ERR_CAP_MASTER]	= 0x034,
+};
+
 static const int gisb_offsets_bcm7435[] = {
 	[ARB_TIMER]		= 0x00c,
 	[ARB_BP_CAP_CLR]	= 0x014,
@@ -393,6 +407,7 @@ static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
 	{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
 	{ .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
 	{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
+	{ .compatible = "brcm,bcm74165-gisb-arb", .data = gisb_offsets_bcm74165 },
 	{ },
 };
 
diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 4fa932cb0915..baf22a82c47a 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -39,45 +39,39 @@ struct ts_nbus {
 /*
  * request all gpios required by the bus.
  */
-static int ts_nbus_init_pdata(struct platform_device *pdev, struct ts_nbus
-		*ts_nbus)
+static int ts_nbus_init_pdata(struct platform_device *pdev,
+			      struct ts_nbus *ts_nbus)
 {
 	ts_nbus->data = devm_gpiod_get_array(&pdev->dev, "ts,data",
 			GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->data)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,data-gpio from dts\n");
-		return PTR_ERR(ts_nbus->data);
-	}
+	if (IS_ERR(ts_nbus->data))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->data),
+				     "failed to retrieve ts,data-gpio from dts\n");
 
 	ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->csn)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,csn-gpio from dts\n");
-		return PTR_ERR(ts_nbus->csn);
-	}
+	if (IS_ERR(ts_nbus->csn))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->csn),
+			      "failed to retrieve ts,csn-gpio from dts\n");
 
 	ts_nbus->txrx = devm_gpiod_get(&pdev->dev, "ts,txrx", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->txrx)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,txrx-gpio from dts\n");
-		return PTR_ERR(ts_nbus->txrx);
-	}
+	if (IS_ERR(ts_nbus->txrx))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->txrx),
+				     "failed to retrieve ts,txrx-gpio from dts\n");
 
 	ts_nbus->strobe = devm_gpiod_get(&pdev->dev, "ts,strobe", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->strobe)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,strobe-gpio from dts\n");
-		return PTR_ERR(ts_nbus->strobe);
-	}
+	if (IS_ERR(ts_nbus->strobe))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->strobe),
+				     "failed to retrieve ts,strobe-gpio from dts\n");
 
 	ts_nbus->ale = devm_gpiod_get(&pdev->dev, "ts,ale", GPIOD_OUT_HIGH);
-	if (IS_ERR(ts_nbus->ale)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,ale-gpio from dts\n");
-		return PTR_ERR(ts_nbus->ale);
-	}
+	if (IS_ERR(ts_nbus->ale))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->ale),
+				     "failed to retrieve ts,ale-gpio from dts\n");
 
 	ts_nbus->rdy = devm_gpiod_get(&pdev->dev, "ts,rdy", GPIOD_IN);
-	if (IS_ERR(ts_nbus->rdy)) {
-		dev_err(&pdev->dev, "failed to retrieve ts,rdy-gpio from dts\n");
-		return PTR_ERR(ts_nbus->rdy);
-	}
+	if (IS_ERR(ts_nbus->rdy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->rdy),
+				     "failed to retrieve ts,rdy-gpio from dts\n");
 
 	return 0;
 }
@@ -273,7 +267,7 @@ EXPORT_SYMBOL_GPL(ts_nbus_write);
 static int ts_nbus_probe(struct platform_device *pdev)
 {
 	struct pwm_device *pwm;
-	struct pwm_args pargs;
+	struct pwm_state state;
 	struct device *dev = &pdev->dev;
 	struct ts_nbus *ts_nbus;
 	int ret;
@@ -289,32 +283,24 @@ static int ts_nbus_probe(struct platform_device *pdev)
 		return ret;
 
 	pwm = devm_pwm_get(dev, NULL);
-	if (IS_ERR(pwm)) {
-		ret = PTR_ERR(pwm);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "unable to request PWM\n");
-		return ret;
-	}
+	if (IS_ERR(pwm))
+		return dev_err_probe(dev, PTR_ERR(pwm),
+				     "unable to request PWM\n");
 
-	pwm_get_args(pwm, &pargs);
-	if (!pargs.period) {
-		dev_err(&pdev->dev, "invalid PWM period\n");
-		return -EINVAL;
-	}
+	pwm_init_state(pwm, &state);
+	if (!state.period)
+		return dev_err_probe(dev, -EINVAL, "invalid PWM period\n");
 
-	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to
-	 * the atomic PWM API.
-	 */
-	pwm_apply_args(pwm);
-	ret = pwm_config(pwm, pargs.period, pargs.period);
+	state.duty_cycle = state.period;
+	state.enabled = true;
+
+	ret = pwm_apply_state(pwm, &state);
 	if (ret < 0)
-		return ret;
+		return dev_err_probe(dev, ret, "failed to configure PWM\n");
 
 	/*
 	 * we can now start the FPGA and populate the peripherals.
 	 */
-	pwm_enable(pwm);
 	ts_nbus->pwm = pwm;
 
 	/*
@@ -324,7 +310,8 @@ static int ts_nbus_probe(struct platform_device *pdev)
 
 	ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
 	if (ret < 0)
-		return ret;
+		return dev_err_probe(dev, ret,
+				     "failed to populate platform devices on bus\n");
 
 	dev_info(dev, "initialized\n");