summaryrefslogtreecommitdiff
path: root/drivers/bus
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-02-21 05:42:28 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-02-21 05:42:28 +0300
commite767b3530acbf651593e3d357fe1168a024d8061 (patch)
tree0f549bbb4cf187661416f672dd0329c59b7a8fee /drivers/bus
parent82851fce6107d5a3e66d95aee2ae68860a732703 (diff)
parent4f79a8b06fccec3dd68935db5a4662435c472abf (diff)
downloadlinux-e767b3530acbf651593e3d357fe1168a024d8061.tar.xz
Merge tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: SCMI firmware: - add support for a completion interrupt Reset controllers: - new driver for BCM4908 - new devm_reset_control_get_optional_exclusive_released() function Memory controllers: - Renesas RZ/G2 support - Tegra124 interconnect support - Allow more drivers to be loadable modules TEE/optee firmware: - minor code cleanup The other half of this is SoC specific drivers that do not belong into any other subsystem, most of them living in drivers/soc: - Allwinner/sunxi power management work - Allwinner H616 support - ASpeed AST2600 system identification support - AT91 SAMA7G5 SoC ID driver - AT91 SoC driver cleanups - Broadcom BCM4908 power management bus support - Marvell mbus cleanups - Mediatek MT8167 power domain support - Qualcomm socinfo driver support for PMIC - Qualcomm SoC identification for many more products - TI Keystone driver cleanups for PRUSS and elsewhere" * tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits) soc: aspeed: socinfo: Add new systems soc: aspeed: snoop: Add clock control logic memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE memory: samsung: exynos5422-dmc: Correct function names in kerneldoc memory: ti-emif-pm: Drop of_match_ptr from of_device_id table optee: simplify i2c access drivers: soc: atmel: fix type for same7 tee: optee: remove need_resched() before cond_resched() soc: qcom: ocmem: don't return NULL in of_get_ocmem optee: sync OP-TEE headers tee: optee: fix 'physical' typos drivers: optee: use flexible-array member instead of zero-length array tee: fix some comment typos in header files soc: ti: k3-ringacc: Use of_device_get_match_data() soc: ti: pruss: Refactor the CFG sub-module init soc: mediatek: pm-domains: Don't print an error if child domain is deferred soc: mediatek: pm-domains: Add domain regulator supply dt-bindings: power: Add domain regulator supply soc: mediatek: cmdq: Remove cmdq_pkt_flush() soc: mediatek: pm-domains: Add support for mt8167 ...
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/mvebu-mbus.c2
-rw-r--r--drivers/bus/sunxi-rsb.c215
2 files changed, 154 insertions, 63 deletions
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 2519ceede64b..dd9e7343a5e3 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -1111,7 +1111,7 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size);
if (!mbus->sdramwins_base) {
- iounmap(mbus_state.mbuswins_base);
+ iounmap(mbus->mbuswins_base);
return -ENOMEM;
}
diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 1bb00a959c67..d46db132d085 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -45,6 +45,8 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -126,6 +128,7 @@ struct sunxi_rsb {
struct completion complete;
struct mutex lock;
unsigned int status;
+ u32 clk_freq;
};
/* bus / slave device related functions */
@@ -170,7 +173,9 @@ static int sunxi_rsb_device_remove(struct device *dev)
{
const struct sunxi_rsb_driver *drv = to_sunxi_rsb_driver(dev->driver);
- return drv->remove(to_sunxi_rsb_device(dev));
+ drv->remove(to_sunxi_rsb_device(dev));
+
+ return 0;
}
static struct bus_type sunxi_rsb_bus = {
@@ -335,6 +340,10 @@ static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
return -EINVAL;
}
+ ret = pm_runtime_resume_and_get(rsb->dev);
+ if (ret)
+ return ret;
+
mutex_lock(&rsb->lock);
writel(addr, rsb->regs + RSB_ADDR);
@@ -350,6 +359,9 @@ static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
unlock:
mutex_unlock(&rsb->lock);
+ pm_runtime_mark_last_busy(rsb->dev);
+ pm_runtime_put_autosuspend(rsb->dev);
+
return ret;
}
@@ -377,6 +389,10 @@ static int sunxi_rsb_write(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
return -EINVAL;
}
+ ret = pm_runtime_resume_and_get(rsb->dev);
+ if (ret)
+ return ret;
+
mutex_lock(&rsb->lock);
writel(addr, rsb->regs + RSB_ADDR);
@@ -387,6 +403,9 @@ static int sunxi_rsb_write(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
mutex_unlock(&rsb->lock);
+ pm_runtime_mark_last_busy(rsb->dev);
+ pm_runtime_put_autosuspend(rsb->dev);
+
return ret;
}
@@ -614,11 +633,100 @@ static int of_rsb_register_devices(struct sunxi_rsb *rsb)
return 0;
}
-static const struct of_device_id sunxi_rsb_of_match_table[] = {
- { .compatible = "allwinner,sun8i-a23-rsb" },
- {}
-};
-MODULE_DEVICE_TABLE(of, sunxi_rsb_of_match_table);
+static int sunxi_rsb_hw_init(struct sunxi_rsb *rsb)
+{
+ struct device *dev = rsb->dev;
+ unsigned long p_clk_freq;
+ u32 clk_delay, reg;
+ int clk_div, ret;
+
+ ret = clk_prepare_enable(rsb->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clk: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_control_deassert(rsb->rstc);
+ if (ret) {
+ dev_err(dev, "failed to deassert reset line: %d\n", ret);
+ goto err_clk_disable;
+ }
+
+ /* reset the controller */
+ writel(RSB_CTRL_SOFT_RST, rsb->regs + RSB_CTRL);
+ readl_poll_timeout(rsb->regs + RSB_CTRL, reg,
+ !(reg & RSB_CTRL_SOFT_RST), 1000, 100000);
+
+ /*
+ * Clock frequency and delay calculation code is from
+ * Allwinner U-boot sources.
+ *
+ * From A83 user manual:
+ * bus clock frequency = parent clock frequency / (2 * (divider + 1))
+ */
+ p_clk_freq = clk_get_rate(rsb->clk);
+ clk_div = p_clk_freq / rsb->clk_freq / 2;
+ if (!clk_div)
+ clk_div = 1;
+ else if (clk_div > RSB_CCR_MAX_CLK_DIV + 1)
+ clk_div = RSB_CCR_MAX_CLK_DIV + 1;
+
+ clk_delay = clk_div >> 1;
+ if (!clk_delay)
+ clk_delay = 1;
+
+ dev_info(dev, "RSB running at %lu Hz\n", p_clk_freq / clk_div / 2);
+ writel(RSB_CCR_SDA_OUT_DELAY(clk_delay) | RSB_CCR_CLK_DIV(clk_div - 1),
+ rsb->regs + RSB_CCR);
+
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(rsb->clk);
+
+ return ret;
+}
+
+static void sunxi_rsb_hw_exit(struct sunxi_rsb *rsb)
+{
+ /* Keep the clock and PM reference counts consistent. */
+ if (pm_runtime_status_suspended(rsb->dev))
+ pm_runtime_resume(rsb->dev);
+ reset_control_assert(rsb->rstc);
+ clk_disable_unprepare(rsb->clk);
+}
+
+static int __maybe_unused sunxi_rsb_runtime_suspend(struct device *dev)
+{
+ struct sunxi_rsb *rsb = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(rsb->clk);
+
+ return 0;
+}
+
+static int __maybe_unused sunxi_rsb_runtime_resume(struct device *dev)
+{
+ struct sunxi_rsb *rsb = dev_get_drvdata(dev);
+
+ return clk_prepare_enable(rsb->clk);
+}
+
+static int __maybe_unused sunxi_rsb_suspend(struct device *dev)
+{
+ struct sunxi_rsb *rsb = dev_get_drvdata(dev);
+
+ sunxi_rsb_hw_exit(rsb);
+
+ return 0;
+}
+
+static int __maybe_unused sunxi_rsb_resume(struct device *dev)
+{
+ struct sunxi_rsb *rsb = dev_get_drvdata(dev);
+
+ return sunxi_rsb_hw_init(rsb);
+}
static int sunxi_rsb_probe(struct platform_device *pdev)
{
@@ -626,10 +734,8 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
struct device_node *np = dev->of_node;
struct resource *r;
struct sunxi_rsb *rsb;
- unsigned long p_clk_freq;
- u32 clk_delay, clk_freq = 3000000;
- int clk_div, irq, ret;
- u32 reg;
+ u32 clk_freq = 3000000;
+ int irq, ret;
of_property_read_u32(np, "clock-frequency", &clk_freq);
if (clk_freq > RSB_MAX_FREQ) {
@@ -644,6 +750,7 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
return -ENOMEM;
rsb->dev = dev;
+ rsb->clk_freq = clk_freq;
platform_set_drvdata(pdev, rsb);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rsb->regs = devm_ioremap_resource(dev, r);
@@ -661,79 +768,41 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
return ret;
}
- ret = clk_prepare_enable(rsb->clk);
- if (ret) {
- dev_err(dev, "failed to enable clk: %d\n", ret);
- return ret;
- }
-
- p_clk_freq = clk_get_rate(rsb->clk);
-
rsb->rstc = devm_reset_control_get(dev, NULL);
if (IS_ERR(rsb->rstc)) {
ret = PTR_ERR(rsb->rstc);
dev_err(dev, "failed to retrieve reset controller: %d\n", ret);
- goto err_clk_disable;
- }
-
- ret = reset_control_deassert(rsb->rstc);
- if (ret) {
- dev_err(dev, "failed to deassert reset line: %d\n", ret);
- goto err_clk_disable;
+ return ret;
}
init_completion(&rsb->complete);
mutex_init(&rsb->lock);
- /* reset the controller */
- writel(RSB_CTRL_SOFT_RST, rsb->regs + RSB_CTRL);
- readl_poll_timeout(rsb->regs + RSB_CTRL, reg,
- !(reg & RSB_CTRL_SOFT_RST), 1000, 100000);
-
- /*
- * Clock frequency and delay calculation code is from
- * Allwinner U-boot sources.
- *
- * From A83 user manual:
- * bus clock frequency = parent clock frequency / (2 * (divider + 1))
- */
- clk_div = p_clk_freq / clk_freq / 2;
- if (!clk_div)
- clk_div = 1;
- else if (clk_div > RSB_CCR_MAX_CLK_DIV + 1)
- clk_div = RSB_CCR_MAX_CLK_DIV + 1;
-
- clk_delay = clk_div >> 1;
- if (!clk_delay)
- clk_delay = 1;
-
- dev_info(dev, "RSB running at %lu Hz\n", p_clk_freq / clk_div / 2);
- writel(RSB_CCR_SDA_OUT_DELAY(clk_delay) | RSB_CCR_CLK_DIV(clk_div - 1),
- rsb->regs + RSB_CCR);
-
ret = devm_request_irq(dev, irq, sunxi_rsb_irq, 0, RSB_CTRL_NAME, rsb);
if (ret) {
dev_err(dev, "can't register interrupt handler irq %d: %d\n",
irq, ret);
- goto err_reset_assert;
+ return ret;
}
+ ret = sunxi_rsb_hw_init(rsb);
+ if (ret)
+ return ret;
+
/* initialize all devices on the bus into RSB mode */
ret = sunxi_rsb_init_device_mode(rsb);
if (ret)
dev_warn(dev, "Initialize device mode failed: %d\n", ret);
+ pm_suspend_ignore_children(dev, true);
+ pm_runtime_set_active(dev);
+ pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_enable(dev);
+
of_rsb_register_devices(rsb);
return 0;
-
-err_reset_assert:
- reset_control_assert(rsb->rstc);
-
-err_clk_disable:
- clk_disable_unprepare(rsb->clk);
-
- return ret;
}
static int sunxi_rsb_remove(struct platform_device *pdev)
@@ -741,18 +810,40 @@ static int sunxi_rsb_remove(struct platform_device *pdev)
struct sunxi_rsb *rsb = platform_get_drvdata(pdev);
device_for_each_child(rsb->dev, NULL, sunxi_rsb_remove_devices);
- reset_control_assert(rsb->rstc);
- clk_disable_unprepare(rsb->clk);
+ pm_runtime_disable(&pdev->dev);
+ sunxi_rsb_hw_exit(rsb);
return 0;
}
+static void sunxi_rsb_shutdown(struct platform_device *pdev)
+{
+ struct sunxi_rsb *rsb = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ sunxi_rsb_hw_exit(rsb);
+}
+
+static const struct dev_pm_ops sunxi_rsb_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(sunxi_rsb_runtime_suspend,
+ sunxi_rsb_runtime_resume, NULL)
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sunxi_rsb_suspend, sunxi_rsb_resume)
+};
+
+static const struct of_device_id sunxi_rsb_of_match_table[] = {
+ { .compatible = "allwinner,sun8i-a23-rsb" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sunxi_rsb_of_match_table);
+
static struct platform_driver sunxi_rsb_driver = {
.probe = sunxi_rsb_probe,
.remove = sunxi_rsb_remove,
+ .shutdown = sunxi_rsb_shutdown,
.driver = {
.name = RSB_CTRL_NAME,
.of_match_table = sunxi_rsb_of_match_table,
+ .pm = &sunxi_rsb_dev_pm_ops,
},
};