summaryrefslogtreecommitdiff
path: root/drivers/bus
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-07-05 00:47:47 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-07-05 00:47:47 +0300
commite8547112910540afb71589ee807ae6a4259f9755 (patch)
tree7d3d7eb17be4e6d2b181bffc4d471e93063674b4 /drivers/bus
parent9ce32ac8f83729aca9f45ce9598dbc5451d1044b (diff)
parentffe3744a591fdce695da6b891378261e2caedc69 (diff)
downloadlinux-e8547112910540afb71589ee807ae6a4259f9755.tar.xz
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/Kconfig2
-rw-r--r--drivers/bus/brcmstb_gisb.c121
2 files changed, 73 insertions, 50 deletions
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0a52da439abf..d2a5f1184022 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -57,7 +57,7 @@ config ARM_CCN
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
- depends on ARM || MIPS
+ depends on ARM || ARM64 || MIPS
default ARCH_BRCMSTB || BMIPS_GENERIC
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index 72fe0a5a8bf3..68ac3e93b600 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -24,11 +24,9 @@
#include <linux/of.h>
#include <linux/bitops.h>
#include <linux/pm.h>
-
-#ifdef CONFIG_ARM
-#include <asm/bug.h>
-#include <asm/signal.h>
-#endif
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
#ifdef CONFIG_MIPS
#include <asm/traps.h>
@@ -37,8 +35,6 @@
#define ARB_ERR_CAP_CLEAR (1 << 0)
#define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12)
#define ARB_ERR_CAP_STATUS_TEA (1 << 11)
-#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2)
-#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
@@ -47,7 +43,6 @@ enum {
ARB_ERR_CAP_CLR,
ARB_ERR_CAP_HI_ADDR,
ARB_ERR_CAP_ADDR,
- ARB_ERR_CAP_DATA,
ARB_ERR_CAP_STATUS,
ARB_ERR_CAP_MASTER,
};
@@ -57,17 +52,24 @@ static const int gisb_offsets_bcm7038[] = {
[ARB_ERR_CAP_CLR] = 0x0c4,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0c8,
- [ARB_ERR_CAP_DATA] = 0x0cc,
[ARB_ERR_CAP_STATUS] = 0x0d0,
[ARB_ERR_CAP_MASTER] = -1,
};
+static const int gisb_offsets_bcm7278[] = {
+ [ARB_TIMER] = 0x008,
+ [ARB_ERR_CAP_CLR] = 0x7f8,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x7e0,
+ [ARB_ERR_CAP_STATUS] = 0x7f0,
+ [ARB_ERR_CAP_MASTER] = 0x7f4,
+};
+
static const int gisb_offsets_bcm7400[] = {
[ARB_TIMER] = 0x00c,
[ARB_ERR_CAP_CLR] = 0x0c8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0cc,
- [ARB_ERR_CAP_DATA] = 0x0d0,
[ARB_ERR_CAP_STATUS] = 0x0d4,
[ARB_ERR_CAP_MASTER] = 0x0d8,
};
@@ -77,7 +79,6 @@ static const int gisb_offsets_bcm7435[] = {
[ARB_ERR_CAP_CLR] = 0x168,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x16c,
- [ARB_ERR_CAP_DATA] = 0x170,
[ARB_ERR_CAP_STATUS] = 0x174,
[ARB_ERR_CAP_MASTER] = 0x178,
};
@@ -87,7 +88,6 @@ static const int gisb_offsets_bcm7445[] = {
[ARB_ERR_CAP_CLR] = 0x7e4,
[ARB_ERR_CAP_HI_ADDR] = 0x7e8,
[ARB_ERR_CAP_ADDR] = 0x7ec,
- [ARB_ERR_CAP_DATA] = 0x7f0,
[ARB_ERR_CAP_STATUS] = 0x7f4,
[ARB_ERR_CAP_MASTER] = 0x7f8,
};
@@ -109,9 +109,13 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
{
int offset = gdev->gisb_offsets[reg];
- /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
- if (offset == -1)
- return 1;
+ if (offset < 0) {
+ /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+ if (reg == ARB_ERR_CAP_MASTER)
+ return 1;
+ else
+ return 0;
+ }
if (gdev->big_endian)
return ioread32be(gdev->base + offset);
@@ -119,6 +123,16 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
return ioread32(gdev->base + offset);
}
+static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
+{
+ u64 value;
+
+ value = gisb_read(gdev, ARB_ERR_CAP_ADDR);
+ value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
+
+ return value;
+}
+
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
{
int offset = gdev->gisb_offsets[reg];
@@ -127,9 +141,9 @@ static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
return;
if (gdev->big_endian)
- iowrite32be(val, gdev->base + reg);
+ iowrite32be(val, gdev->base + offset);
else
- iowrite32(val, gdev->base + reg);
+ iowrite32(val, gdev->base + offset);
}
static ssize_t gisb_arb_get_timeout(struct device *dev,
@@ -185,7 +199,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
const char *reason)
{
u32 cap_status;
- unsigned long arb_addr;
+ u64 arb_addr;
u32 master;
const char *m_name;
char m_fmt[11];
@@ -197,10 +211,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 1;
/* Read the address and master */
- arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
-#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
- arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
-#endif
+ arb_addr = gisb_read_address(gdev);
master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
m_name = brcmstb_gisb_master_to_str(gdev, master);
@@ -209,7 +220,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
m_name = m_fmt;
}
- pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+ pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
__func__, reason, arb_addr,
cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
@@ -221,27 +232,6 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 0;
}
-#ifdef CONFIG_ARM
-static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- int ret = 0;
- struct brcmstb_gisb_arb_device *gdev;
-
- /* iterate over each GISB arb registered handlers */
- list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
- ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return ret;
-}
-#endif
-
#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
{
@@ -279,6 +269,36 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/*
+ * Dump out gisb errors on die or panic.
+ */
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+ void *p);
+
+static struct notifier_block gisb_die_notifier = {
+ .notifier_call = dump_gisb_error,
+};
+
+static struct notifier_block gisb_panic_notifier = {
+ .notifier_call = dump_gisb_error,
+};
+
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+ void *p)
+{
+ struct brcmstb_gisb_arb_device *gdev;
+ const char *reason = "panic";
+
+ if (self == &gisb_die_notifier)
+ reason = "die";
+
+ /* iterate over each GISB arb registered handlers */
+ list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
+ brcmstb_gisb_arb_decode_addr(gdev, reason);
+
+ return NOTIFY_DONE;
+}
+
static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO,
gisb_arb_get_timeout, gisb_arb_set_timeout);
@@ -296,6 +316,7 @@ static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
{ .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
{ .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
+ { .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
{ },
};
@@ -378,14 +399,16 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list);
-#ifdef CONFIG_ARM
- hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
- "imprecise external abort");
-#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
+ if (list_is_singular(&brcmstb_gisb_arb_device_list)) {
+ register_die_notifier(&gisb_die_notifier);
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &gisb_panic_notifier);
+ }
+
dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
gdev->base, timeout_irq, tea_irq);