Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This release is almost all drivers, there's some small improvements in
  the core but otherwise everything is updates to drivers, mostly the
  addition of new ones.

  There's also a bunch of changes pulled in from the MFD subsystem as
  dependencies, Rockchip and TI core MFD code that the regulator drivers
  depend on.

  I've also yet again managed to put a SPI commit in the regulator tree,
  I don't know what it is about those two trees (this for
  spi-geni-qcom).

  Summary:

   - Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
     TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"

* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
  regulator: Add Renesas PMIC RAA215300 driver
  regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
  regulator: ltc3676: Use maple tree register cache
  regulator: ltc3589: Use maple tree register cache
  regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
  regulator: mt6358: Use linear voltage helpers for single range regulators
  regulator: mt6358: Const-ify mt6358_regulator_info data structures
  regulator: mt6358: Drop *_SSHUB regulators
  regulator: mt6358: Merge VCN33_* regulators
  regulator: dt-bindings: mt6358: Drop *_sshub regulators
  regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
  regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
  regulator: Switch two more i2c drivers back to use .probe()
  spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
  soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
  regulator: axp20x: Add AXP15060 support
  regulator: axp20x: Add support for AXP313a variant
  dt-bindings: pfuze100.yaml: Add an entry for interrupts
  regulator: stm32-pwr: Fix regulator disabling
  ...

2 files changed, 17 insertions, 19 deletions

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 016814e15536..c0c8e526a1e9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -82,7 +82,7 @@ config COMMON_CLK_MAX9485
 
 config COMMON_CLK_RK808
 	tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
 	  These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
index 32f833d732ed..f7412b137e5e 100644
--- a/drivers/clk/clk-rk808.c
+++ b/drivers/clk/clk-rk808.c
@@ -12,10 +12,9 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/rk808.h>
-#include <linux/i2c.h>
 
 struct rk808_clkout {
-	struct rk808 *rk808;
+	struct regmap		*regmap;
 	struct clk_hw		clkout1_hw;
 	struct clk_hw		clkout2_hw;
 };
@@ -31,9 +30,8 @@ static int rk808_clkout2_enable(struct clk_hw *hw, bool enable)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 
-	return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
+	return regmap_update_bits(rk808_clkout->regmap, RK808_CLK32OUT_REG,
 				  CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
 }
 
@@ -52,10 +50,9 @@ static int rk808_clkout2_is_prepared(struct clk_hw *hw)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 	uint32_t val;
 
-	int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
+	int ret = regmap_read(rk808_clkout->regmap, RK808_CLK32OUT_REG, &val);
 
 	if (ret < 0)
 		return ret;
@@ -93,9 +90,8 @@ static int rk817_clkout2_enable(struct clk_hw *hw, bool enable)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 
-	return regmap_update_bits(rk808->regmap, RK817_SYS_CFG(1),
+	return regmap_update_bits(rk808_clkout->regmap, RK817_SYS_CFG(1),
 				  RK817_CLK32KOUT2_EN,
 				  enable ? RK817_CLK32KOUT2_EN : 0);
 }
@@ -115,10 +111,9 @@ static int rk817_clkout2_is_prepared(struct clk_hw *hw)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 	unsigned int val;
 
-	int ret = regmap_read(rk808->regmap, RK817_SYS_CFG(1), &val);
+	int ret = regmap_read(rk808_clkout->regmap, RK817_SYS_CFG(1), &val);
 
 	if (ret < 0)
 		return 0;
@@ -153,18 +148,21 @@ static const struct clk_ops *rkpmic_get_ops(long variant)
 static int rk808_clkout_probe(struct platform_device *pdev)
 {
 	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
-	struct i2c_client *client = rk808->i2c;
-	struct device_node *node = client->dev.of_node;
+	struct device *dev = &pdev->dev;
 	struct clk_init_data init = {};
 	struct rk808_clkout *rk808_clkout;
 	int ret;
 
-	rk808_clkout = devm_kzalloc(&client->dev,
+	dev->of_node = pdev->dev.parent->of_node;
+
+	rk808_clkout = devm_kzalloc(dev,
 				    sizeof(*rk808_clkout), GFP_KERNEL);
 	if (!rk808_clkout)
 		return -ENOMEM;
 
-	rk808_clkout->rk808 = rk808;
+	rk808_clkout->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!rk808_clkout->regmap)
+		return -ENODEV;
 
 	init.parent_names = NULL;
 	init.num_parents = 0;
@@ -173,10 +171,10 @@ static int rk808_clkout_probe(struct platform_device *pdev)
 	rk808_clkout->clkout1_hw.init = &init;
 
 	/* optional override of the clockname */
-	of_property_read_string_index(node, "clock-output-names",
+	of_property_read_string_index(dev->of_node, "clock-output-names",
 				      0, &init.name);
 
-	ret = devm_clk_hw_register(&client->dev, &rk808_clkout->clkout1_hw);
+	ret = devm_clk_hw_register(dev, &rk808_clkout->clkout1_hw);
 	if (ret)
 		return ret;
 
@@ -185,10 +183,10 @@ static int rk808_clkout_probe(struct platform_device *pdev)
 	rk808_clkout->clkout2_hw.init = &init;
 
 	/* optional override of the clockname */
-	of_property_read_string_index(node, "clock-output-names",
+	of_property_read_string_index(dev->of_node, "clock-output-names",
 				      1, &init.name);
 
-	ret = devm_clk_hw_register(&client->dev, &rk808_clkout->clkout2_hw);
+	ret = devm_clk_hw_register(dev, &rk808_clkout->clkout2_hw);
 	if (ret)
 		return ret;