summaryrefslogtreecommitdiff
path: root/drivers/clk
diff options
context:
space:
mode:
authorJoel Stanley <joel@jms.id.au>2019-08-25 17:18:48 +0300
committerStephen Boyd <sboyd@kernel.org>2019-09-07 01:22:29 +0300
commitd3d04f6c330a60ce7170a1076b06f31c77ba7873 (patch)
treeee17b487e81c16aa87eec62fe875085ca9c413ad /drivers/clk
parentc1c4942eebdbb80d36d72df6f0ac19f82cf5dd9f (diff)
downloadlinux-d3d04f6c330a60ce7170a1076b06f31c77ba7873.tar.xz
clk: Add support for AST2600 SoC
The ast2600 is a new BMC SoC from ASPEED. It contains many more clocks than the previous iterations, so support is broken out into it's own driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/20190825141848.17346-3-joel@jms.id.au [sboyd@kernel.org: Mark arrays const] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/Makefile1
-rw-r--r--drivers/clk/clk-ast2600.c704
2 files changed, 705 insertions, 0 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0cad76021297..0138fb14e6f8 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
+obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
obj-$(CONFIG_COMMON_CLK_LOCHNAGAR) += clk-lochnagar.o
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
new file mode 100644
index 000000000000..1c1bb39bb04e
--- /dev/null
+++ b/drivers/clk/clk-ast2600.c
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright IBM Corp
+// Copyright ASPEED Technology
+
+#define pr_fmt(fmt) "clk-ast2600: " fmt
+
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/ast2600-clock.h>
+
+#include "clk-aspeed.h"
+
+#define ASPEED_G6_NUM_CLKS 67
+
+#define ASPEED_G6_SILICON_REV 0x004
+
+#define ASPEED_G6_RESET_CTRL 0x040
+#define ASPEED_G6_RESET_CTRL2 0x050
+
+#define ASPEED_G6_CLK_STOP_CTRL 0x080
+#define ASPEED_G6_CLK_STOP_CTRL2 0x090
+
+#define ASPEED_G6_MISC_CTRL 0x0C0
+#define UART_DIV13_EN BIT(12)
+
+#define ASPEED_G6_CLK_SELECTION1 0x300
+#define ASPEED_G6_CLK_SELECTION2 0x304
+#define ASPEED_G6_CLK_SELECTION4 0x310
+
+#define ASPEED_HPLL_PARAM 0x200
+#define ASPEED_APLL_PARAM 0x210
+#define ASPEED_MPLL_PARAM 0x220
+#define ASPEED_EPLL_PARAM 0x240
+#define ASPEED_DPLL_PARAM 0x260
+
+#define ASPEED_G6_STRAP1 0x500
+
+/* Globally visible clocks */
+static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
+
+/* Keeps track of all clocks */
+static struct clk_hw_onecell_data *aspeed_g6_clk_data;
+
+static void __iomem *scu_g6_base;
+
+/*
+ * Clocks marked with CLK_IS_CRITICAL:
+ *
+ * ref0 and ref1 are essential for the SoC to operate
+ * mpll is required if SDRAM is used
+ */
+static const struct aspeed_gate_data aspeed_g6_gates[] = {
+ /* clk rst name parent flags */
+ [ASPEED_CLK_GATE_MCLK] = { 0, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */
+ [ASPEED_CLK_GATE_ECLK] = { 1, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */
+ [ASPEED_CLK_GATE_GCLK] = { 2, 7, "gclk-gate", NULL, 0 }, /* 2D engine */
+ /* vclk parent - dclk/d1clk/hclk/mclk */
+ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */
+ [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */
+ /* From dpll */
+ [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */
+ [ASPEED_CLK_GATE_REF0CLK] = { 6, -1, "ref0clk-gate", "clkin", CLK_IS_CRITICAL },
+ [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */
+ /* Reserved 8 */
+ [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */
+ /* From dpll/epll/40mhz usb p1 phy/gpioc6/dp phy pll */
+ [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", "d1clk", 0 }, /* GFX CRT */
+ /* Reserved 11/12 */
+ [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */
+ [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */
+ [ASPEED_CLK_GATE_UART5CLK] = { 15, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */
+ /* Reserved 16/19 */
+ [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac12", 0 }, /* MAC1 */
+ [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac12", 0 }, /* MAC2 */
+ /* Reserved 22/23 */
+ [ASPEED_CLK_GATE_RSACLK] = { 24, 4, "rsaclk-gate", NULL, 0 }, /* HAC */
+ [ASPEED_CLK_GATE_RVASCLK] = { 25, 9, "rvasclk-gate", NULL, 0 }, /* RVAS */
+ /* Reserved 26 */
+ [ASPEED_CLK_GATE_EMMCCLK] = { 27, 16, "emmcclk-gate", NULL, 0 }, /* For card clk */
+ /* Reserved 28/29/30 */
+ [ASPEED_CLK_GATE_LCLK] = { 32, 32, "lclk-gate", NULL, 0 }, /* LPC */
+ [ASPEED_CLK_GATE_ESPICLK] = { 33, -1, "espiclk-gate", NULL, 0 }, /* eSPI */
+ [ASPEED_CLK_GATE_REF1CLK] = { 34, -1, "ref1clk-gate", "clkin", CLK_IS_CRITICAL },
+ /* Reserved 35 */
+ [ASPEED_CLK_GATE_SDCLK] = { 36, 56, "sdclk-gate", NULL, 0 }, /* SDIO/SD */
+ [ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
+ /* Reserved 38 RSA: no longer used */
+ /* Reserved 39 */
+ [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */
+ [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */
+ [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */
+ [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */
+ [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */
+ [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */
+ [ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */
+ [ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */
+ [ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */
+ [ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */
+ [ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */
+ [ASPEED_CLK_GATE_UART4CLK] = { 51, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */
+ [ASPEED_CLK_GATE_MAC3CLK] = { 52, 52, "mac3clk-gate", "mac34", 0 }, /* MAC3 */
+ [ASPEED_CLK_GATE_MAC4CLK] = { 53, 53, "mac4clk-gate", "mac34", 0 }, /* MAC4 */
+ [ASPEED_CLK_GATE_UART6CLK] = { 54, -1, "uart6clk-gate", "uartx", 0 }, /* UART6 */
+ [ASPEED_CLK_GATE_UART7CLK] = { 55, -1, "uart7clk-gate", "uartx", 0 }, /* UART7 */
+ [ASPEED_CLK_GATE_UART8CLK] = { 56, -1, "uart8clk-gate", "uartx", 0 }, /* UART8 */
+ [ASPEED_CLK_GATE_UART9CLK] = { 57, -1, "uart9clk-gate", "uartx", 0 }, /* UART9 */
+ [ASPEED_CLK_GATE_UART10CLK] = { 58, -1, "uart10clk-gate", "uartx", 0 }, /* UART10 */
+ [ASPEED_CLK_GATE_UART11CLK] = { 59, -1, "uart11clk-gate", "uartx", 0 }, /* UART11 */
+ [ASPEED_CLK_GATE_UART12CLK] = { 60, -1, "uart12clk-gate", "uartx", 0 }, /* UART12 */
+ [ASPEED_CLK_GATE_UART13CLK] = { 61, -1, "uart13clk-gate", "uartx", 0 }, /* UART13 */
+ [ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", NULL, 0 }, /* FSI */
+};
+
+static const char * const eclk_parent_names[] = { "mpll", "hpll", "dpll" };
+
+static const struct clk_div_table ast2600_eclk_div_table[] = {
+ { 0x0, 2 },
+ { 0x1, 2 },
+ { 0x2, 3 },
+ { 0x3, 4 },
+ { 0x4, 5 },
+ { 0x5, 6 },
+ { 0x6, 7 },
+ { 0x7, 8 },
+ { 0 }
+};
+
+static const struct clk_div_table ast2600_mac_div_table[] = {
+ { 0x0, 4 },
+ { 0x1, 4 },
+ { 0x2, 6 },
+ { 0x3, 8 },
+ { 0x4, 10 },
+ { 0x5, 12 },
+ { 0x6, 14 },
+ { 0x7, 16 },
+ { 0 }
+};
+
+static const struct clk_div_table ast2600_div_table[] = {
+ { 0x0, 4 },
+ { 0x1, 8 },
+ { 0x2, 12 },
+ { 0x3, 16 },
+ { 0x4, 20 },
+ { 0x5, 24 },
+ { 0x6, 28 },
+ { 0x7, 32 },
+ { 0 }
+};
+
+/* For hpll/dpll/epll/mpll */
+static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
+{
+ unsigned int mult, div;
+
+ if (val & BIT(24)) {
+ /* Pass through mode */
+ mult = div = 1;
+ } else {
+ /* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1) */
+ u32 m = val & 0x1fff;
+ u32 n = (val >> 13) & 0x3f;
+ u32 p = (val >> 19) & 0xf;
+ mult = (m + 1) / (n + 1);
+ div = (p + 1);
+ }
+ return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
+ mult, div);
+};
+
+static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
+{
+ unsigned int mult, div;
+
+ if (val & BIT(20)) {
+ /* Pass through mode */
+ mult = div = 1;
+ } else {
+ /* F = 25Mhz * (2-od) * [(m + 2) / (n + 1)] */
+ u32 m = (val >> 5) & 0x3f;
+ u32 od = (val >> 4) & 0x1;
+ u32 n = val & 0xf;
+
+ mult = (2 - od) * (m + 2);
+ div = n + 1;
+ }
+ return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
+ mult, div);
+};
+
+static u32 get_bit(u8 idx)
+{
+ return BIT(idx % 32);
+}
+
+static u32 get_reset_reg(struct aspeed_clk_gate *gate)
+{
+ if (gate->reset_idx < 32)
+ return ASPEED_G6_RESET_CTRL;
+
+ return ASPEED_G6_RESET_CTRL2;
+}
+
+static u32 get_clock_reg(struct aspeed_clk_gate *gate)
+{
+ if (gate->clock_idx < 32)
+ return ASPEED_G6_CLK_STOP_CTRL;
+
+ return ASPEED_G6_CLK_STOP_CTRL2;
+}
+
+static int aspeed_g6_clk_is_enabled(struct clk_hw *hw)
+{
+ struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+ u32 clk = get_bit(gate->clock_idx);
+ u32 rst = get_bit(gate->reset_idx);
+ u32 reg;
+ u32 enval;
+
+ /*
+ * If the IP is in reset, treat the clock as not enabled,
+ * this happens with some clocks such as the USB one when
+ * coming from cold reset. Without this, aspeed_clk_enable()
+ * will fail to lift the reset.
+ */
+ if (gate->reset_idx >= 0) {
+ regmap_read(gate->map, get_reset_reg(gate), &reg);
+
+ if (reg & rst)
+ return 0;
+ }
+
+ regmap_read(gate->map, get_clock_reg(gate), &reg);
+
+ enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
+
+ return ((reg & clk) == enval) ? 1 : 0;
+}
+
+static int aspeed_g6_clk_enable(struct clk_hw *hw)
+{
+ struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+ unsigned long flags;
+ u32 clk = get_bit(gate->clock_idx);
+ u32 rst = get_bit(gate->reset_idx);
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (aspeed_g6_clk_is_enabled(hw)) {
+ spin_unlock_irqrestore(gate->lock, flags);
+ return 0;
+ }
+
+ if (gate->reset_idx >= 0) {
+ /* Put IP in reset */
+ regmap_write(gate->map, get_reset_reg(gate), rst);
+ /* Delay 100us */
+ udelay(100);
+ }
+
+ /* Enable clock */
+ if (gate->flags & CLK_GATE_SET_TO_DISABLE) {
+ regmap_write(gate->map, get_clock_reg(gate), clk);
+ } else {
+ /* Use set to clear register */
+ regmap_write(gate->map, get_clock_reg(gate) + 0x04, clk);
+ }
+
+ if (gate->reset_idx >= 0) {
+ /* A delay of 10ms is specified by the ASPEED docs */
+ mdelay(10);
+ /* Take IP out of reset */
+ regmap_write(gate->map, get_reset_reg(gate) + 0x4, rst);
+ }
+
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return 0;
+}
+
+static void aspeed_g6_clk_disable(struct clk_hw *hw)
+{
+ struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+ unsigned long flags;
+ u32 clk = get_bit(gate->clock_idx);
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->flags & CLK_GATE_SET_TO_DISABLE) {
+ regmap_write(gate->map, get_clock_reg(gate), clk);
+ } else {
+ /* Use set to clear register */
+ regmap_write(gate->map, get_clock_reg(gate) + 0x4, clk);
+ }
+
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static const struct clk_ops aspeed_g6_clk_gate_ops = {
+ .enable = aspeed_g6_clk_enable,
+ .disable = aspeed_g6_clk_disable,
+ .is_enabled = aspeed_g6_clk_is_enabled,
+};
+
+static int aspeed_g6_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 rst = get_bit(id);
+ u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;
+
+ /* Use set to clear register */
+ return regmap_write(ar->map, reg + 0x04, rst);
+}
+
+static int aspeed_g6_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 rst = get_bit(id);
+ u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;
+
+ return regmap_write(ar->map, reg, rst);
+}
+
+static int aspeed_g6_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ int ret;
+ u32 val;
+ u32 rst = get_bit(id);
+ u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;
+
+ ret = regmap_read(ar->map, reg, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & rst);
+}
+
+static const struct reset_control_ops aspeed_g6_reset_ops = {
+ .assert = aspeed_g6_reset_assert,
+ .deassert = aspeed_g6_reset_deassert,
+ .status = aspeed_g6_reset_status,
+};
+
+static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ struct regmap *map, u8 clock_idx, u8 reset_idx,
+ u8 clk_gate_flags, spinlock_t *lock)
+{
+ struct aspeed_clk_gate *gate;
+ struct clk_init_data init;
+ struct clk_hw *hw;
+ int ret;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &aspeed_g6_clk_gate_ops;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ gate->map = map;
+ gate->clock_idx = clock_idx;
+ gate->reset_idx = reset_idx;
+ gate->flags = clk_gate_flags;
+ gate->lock = lock;
+ gate->hw.init = &init;
+
+ hw = &gate->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(gate);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+
+static const char * const vclk_parent_names[] = {
+ "dpll",
+ "d1pll",
+ "hclk",
+ "mclk",
+};
+
+static const char * const d1clk_parent_names[] = {
+ "dpll",
+ "epll",
+ "usb-phy-40m",
+ "gpioc6_clkin",
+ "dp_phy_pll",
+};
+
+static int aspeed_g6_clk_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct aspeed_reset *ar;
+ struct regmap *map;
+ struct clk_hw *hw;
+ u32 val, rate;
+ int i, ret;
+
+ map = syscon_node_to_regmap(dev->of_node);
+ if (IS_ERR(map)) {
+ dev_err(dev, "no syscon regmap\n");
+ return PTR_ERR(map);
+ }
+
+ ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
+ if (!ar)
+ return -ENOMEM;
+
+ ar->map = map;
+
+ ar->rcdev.owner = THIS_MODULE;
+ ar->rcdev.nr_resets = 64;
+ ar->rcdev.ops = &aspeed_g6_reset_ops;
+ ar->rcdev.of_node = dev->of_node;
+
+ ret = devm_reset_controller_register(dev, &ar->rcdev);
+ if (ret) {
+ dev_err(dev, "could not register reset controller\n");
+ return ret;
+ }
+
+ /* UART clock div13 setting */
+ regmap_read(map, ASPEED_G6_MISC_CTRL, &val);
+ if (val & UART_DIV13_EN)
+ rate = 24000000 / 13;
+ else
+ rate = 24000000;
+ hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_UART] = hw;
+
+ /* UART6~13 clock div13 setting */
+ regmap_read(map, 0x80, &val);
+ if (val & BIT(31))
+ rate = 24000000 / 13;
+ else
+ rate = 24000000;
+ hw = clk_hw_register_fixed_rate(dev, "uartx", NULL, 0, rate);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw;
+
+ /* EMMC ext clock divider */
+ hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "hpll", 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 15, 0,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ hw = clk_hw_register_divider_table(dev, "emmc_extclk", "emmc_extclk_gate", 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 12, 3, 0,
+ ast2600_div_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;
+
+ /* SD/SDIO clock divider and gate */
+ hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION4, 31, 0,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate",
+ 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
+ ast2600_div_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;
+
+ /* MAC1/2 AHB bus clock divider */
+ hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0,
+ ast2600_mac_div_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw;
+
+ /* MAC3/4 AHB bus clock divider */
+ hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0,
+ scu_g6_base + 0x310, 24, 3, 0,
+ ast2600_mac_div_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw;
+
+ /* LPC Host (LHCLK) clock divider */
+ hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
+ ast2600_div_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_LHCLK] = hw;
+
+ /* gfx d1clk : use dp clk */
+ regmap_update_bits(map, ASPEED_G6_CLK_SELECTION1, GENMASK(10, 8), BIT(10));
+ /* SoC Display clock selection */
+ hw = clk_hw_register_mux(dev, "d1clk", d1clk_parent_names,
+ ARRAY_SIZE(d1clk_parent_names), 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 8, 3, 0,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_D1CLK] = hw;
+
+ /* d1 clk div 0x308[17:15] x [14:12] - 8,7,6,5,4,3,2,1 */
+ regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */
+
+ /* P-Bus (BCLK) clock divider */
+ hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
+ ast2600_div_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_BCLK] = hw;
+
+ /* Video Capture clock selection */
+ hw = clk_hw_register_mux(dev, "vclk", vclk_parent_names,
+ ARRAY_SIZE(vclk_parent_names), 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION2, 12, 3, 0,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_VCLK] = hw;
+
+ /* Video Engine clock divider */
+ hw = clk_hw_register_divider_table(dev, "eclk", NULL, 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 28, 3, 0,
+ ast2600_eclk_div_table,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_ECLK] = hw;
+
+ for (i = 0; i < ARRAY_SIZE(aspeed_g6_gates); i++) {
+ const struct aspeed_gate_data *gd = &aspeed_g6_gates[i];
+ u32 gate_flags;
+
+ /*
+ * Special case: the USB port 1 clock (bit 14) is always
+ * working the opposite way from the other ones.
+ */
+ gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE;
+ hw = aspeed_g6_clk_hw_register_gate(dev,
+ gd->name,
+ gd->parent_name,
+ gd->flags,
+ map,
+ gd->clock_idx,
+ gd->reset_idx,
+ gate_flags,
+ &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ aspeed_g6_clk_data->hws[i] = hw;
+ }
+
+ return 0;
+};
+
+static const struct of_device_id aspeed_g6_clk_dt_ids[] = {
+ { .compatible = "aspeed,ast2600-scu" },
+ { }
+};
+
+static struct platform_driver aspeed_g6_clk_driver = {
+ .probe = aspeed_g6_clk_probe,
+ .driver = {
+ .name = "ast2600-clk",
+ .of_match_table = aspeed_g6_clk_dt_ids,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(aspeed_g6_clk_driver);
+
+static const u32 ast2600_a0_axi_ahb_div_table[] = {
+ 2, 2, 3, 5,
+};
+
+static const u32 ast2600_a1_axi_ahb_div_table[] = {
+ 4, 6, 2, 4,
+};
+
+static void __init aspeed_g6_cc(struct regmap *map)
+{
+ struct clk_hw *hw;
+ u32 val, div, chip_id, axi_div, ahb_div;
+
+ clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
+
+ /*
+ * High-speed PLL clock derived from the crystal. This the CPU clock,
+ * and we assume that it is enabled
+ */
+ regmap_read(map, ASPEED_HPLL_PARAM, &val);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_HPLL] = ast2600_calc_pll("hpll", val);
+
+ regmap_read(map, ASPEED_MPLL_PARAM, &val);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_MPLL] = ast2600_calc_pll("mpll", val);
+
+ regmap_read(map, ASPEED_DPLL_PARAM, &val);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_DPLL] = ast2600_calc_pll("dpll", val);
+
+ regmap_read(map, ASPEED_EPLL_PARAM, &val);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_EPLL] = ast2600_calc_pll("epll", val);
+
+ regmap_read(map, ASPEED_APLL_PARAM, &val);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_APLL] = ast2600_calc_apll("apll", val);
+
+ /* Strap bits 12:11 define the AXI/AHB clock frequency ratio (aka HCLK)*/
+ regmap_read(map, ASPEED_G6_STRAP1, &val);
+ if (val & BIT(16))
+ axi_div = 1;
+ else
+ axi_div = 2;
+
+ regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
+ if (chip_id & BIT(16))
+ ahb_div = ast2600_a1_axi_ahb_div_table[(val >> 11) & 0x3];
+ else
+ ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3];
+
+ hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw;
+
+ regmap_read(map, ASPEED_G6_CLK_SELECTION1, &val);
+ val = (val >> 23) & 0x7;
+ div = 4 * (val + 1);
+ hw = clk_hw_register_fixed_factor(NULL, "apb1", "hpll", 0, 1, div);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_APB1] = hw;
+
+ regmap_read(map, ASPEED_G6_CLK_SELECTION4, &val);
+ val = (val >> 9) & 0x7;
+ div = 2 * (val + 1);
+ hw = clk_hw_register_fixed_factor(NULL, "apb2", "ahb", 0, 1, div);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_APB2] = hw;
+
+ /* USB 2.0 port1 phy 40MHz clock */
+ hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
+};
+
+static void __init aspeed_g6_cc_init(struct device_node *np)
+{
+ struct regmap *map;
+ int ret;
+ int i;
+
+ scu_g6_base = of_iomap(np, 0);
+ if (!scu_g6_base)
+ return;
+
+ aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws,
+ ASPEED_G6_NUM_CLKS), GFP_KERNEL);
+ if (!aspeed_g6_clk_data)
+ return;
+
+ /*
+ * This way all clocks fetched before the platform device probes,
+ * except those we assign here for early use, will be deferred.
+ */
+ for (i = 0; i < ASPEED_G6_NUM_CLKS; i++)
+ aspeed_g6_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
+
+ /*
+ * We check that the regmap works on this very first access,
+ * but as this is an MMIO-backed regmap, subsequent regmap
+ * access is not going to fail and we skip error checks from
+ * this point.
+ */
+ map = syscon_node_to_regmap(np);
+ if (IS_ERR(map)) {
+ pr_err("no syscon regmap\n");
+ return;
+ }
+
+ aspeed_g6_cc(map);
+ aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS;
+ ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_g6_clk_data);
+ if (ret)
+ pr_err("failed to add DT provider: %d\n", ret);
+};
+CLK_OF_DECLARE_DRIVER(aspeed_cc_g6, "aspeed,ast2600-scu", aspeed_g6_cc_init);