diff options
author | Biju Das <biju.das.jz@bp.renesas.com> | 2023-03-30 14:16:30 +0300 |
---|---|---|
committer | Lee Jones <lee@kernel.org> | 2023-04-26 13:40:35 +0300 |
commit | 0be8907359df4c62319f5cb2c6981ff0d9ebf35a (patch) | |
tree | 2d03f6a7a0213fe1d98cffd7e8d694d2815ca3b5 /drivers/counter/Kconfig | |
parent | 7bb985ac03c4a91d185c006f68c4fadfb71e1cca (diff) | |
download | linux-0be8907359df4c62319f5cb2c6981ff0d9ebf35a.tar.xz |
counter: Add Renesas RZ/G2L MTU3a counter driver
Add RZ/G2L MTU3a counter driver. This IP supports the following
phase counting modes on MTU1 and MTU2 channels
1) 16-bit phase counting modes on MTU1 and MTU2 channels.
2) 32-bit phase counting mode by cascading MTU1 and MTU2 channels.
This patch adds 3 counter value channels.
count0: 16-bit phase counter value channel on MTU1
count1: 16-bit phase counter value channel on MTU2
count2: 32-bit phase counter value channel by cascading
MTU1 and MTU2 channels.
The external input phase clock pin for the counter value channels
are as follows:
count0: "MTCLKA-MTCLKB"
count1: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
count2: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
Use the sysfs variable "external_input_phase_clock_select" to select the
external input phase clock pin and "cascade_counts_enable" to enable/
disable cascading of channels.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-5-biju.das.jz@bp.renesas.com
Diffstat (limited to 'drivers/counter/Kconfig')
-rw-r--r-- | drivers/counter/Kconfig | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig index b5ba8fb02cf7..4228be917038 100644 --- a/drivers/counter/Kconfig +++ b/drivers/counter/Kconfig @@ -73,6 +73,17 @@ config MICROCHIP_TCB_CAPTURE To compile this driver as a module, choose M here: the module will be called microchip-tcb-capture. +config RZ_MTU3_CNT + tristate "Renesas RZ/G2L MTU3a counter driver" + depends on RZ_MTU3 || COMPILE_TEST + help + Enable support for MTU3a counter driver found on Renesas RZ/G2L alike + SoCs. This IP supports both 16-bit and 32-bit phase counting mode + support. + + To compile this driver as a module, choose M here: the + module will be called rz-mtu3-cnt. + config STM32_LPTIMER_CNT tristate "STM32 LP Timer encoder counter driver" depends on MFD_STM32_LPTIMER || COMPILE_TEST |