summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/cpufreq-dt.c
diff options
context:
space:
mode:
authorIonela Voinescu <ionela.voinescu@arm.com>2020-09-01 23:55:46 +0300
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2020-09-18 20:10:42 +0300
commit1a0419b0db4647107a9cf4a28b331c343c0378a0 (patch)
tree26c5a3d7dcf1af5a09971bf597c555de33e0002c /drivers/cpufreq/cpufreq-dt.c
parent0a10d3fe3e5c601031676e81b41fb2977650b4d4 (diff)
downloadlinux-1a0419b0db4647107a9cf4a28b331c343c0378a0.tar.xz
cpufreq: move invariance setter calls in cpufreq core
To properly scale its per-entity load-tracking signals, the task scheduler needs to be given a frequency scale factor, i.e. some image of the current frequency the CPU is running at. Currently, this scale can be computed either by using counters (APERF/MPERF on x86, AMU on arm64), or by piggy-backing on the frequency selection done by cpufreq. For the latter, drivers have to explicitly set the scale factor themselves, despite it being purely boiler-plate code: the required information depends entirely on the kind of frequency switch callback implemented by the driver, i.e. either of: target_index(), target(), fast_switch() and setpolicy(). The fitness of those callbacks with regard to driving the Frequency Invariance Engine (FIE) is studied below: target_index() ============== Documentation states that the chosen frequency "must be determined by freq_table[index].frequency". It isn't clear if it *has* to be that frequency, or if it can use that frequency value to do some computation that ultimately leads to a different frequency selection. All drivers go for the former, while the vexpress-spc-cpufreq has an atypical implementation which is handled separately. Therefore, the hook works on the assumption the core can use freq_table[index].frequency. target() ======= This has been flagged as deprecated since: commit 9c0ebcf78fde ("cpufreq: Implement light weight ->target_index() routine") It also doesn't have that many users: gx-suspmod.c:439: .target = cpufreq_gx_target, s3c24xx-cpufreq.c:428: .target = s3c_cpufreq_target, intel_pstate.c:2528: .target = intel_cpufreq_target, cppc_cpufreq.c:401: .target = cppc_cpufreq_set_target, cpufreq-nforce2.c:371: .target = nforce2_target, sh-cpufreq.c:163: .target = sh_cpufreq_target, pcc-cpufreq.c:573: .target = pcc_cpufreq_target, Similarly to the path taken for target_index() calls in the cpufreq core during a frequency change, all of the drivers above will mark the end of a frequency change by a call to cpufreq_freq_transition_end(). Therefore, cpufreq_freq_transition_end() can be used as the location for the arch_set_freq_scale() call to potentially inform the scheduler of the frequency change. This change maintains the previous functionality for the drivers that implement the target_index() callback, while also adding support for the few drivers that implement the deprecated target() callback. fast_switch() ============= This callback *has* to return the frequency that was selected. setpolicy() =========== This callback does not have any designated way of informing what was the end choice. But there are only two drivers using setpolicy(), and none of them have current FIE support: drivers/cpufreq/longrun.c:281: .setpolicy = longrun_set_policy, drivers/cpufreq/intel_pstate.c:2215: .setpolicy = intel_pstate_set_policy, The intel_pstate is known to use counter-driven frequency invariance. Conclusion ========== Given that the significant majority of current FIE enabled drivers use callbacks that lend themselves to triggering the setting of the FIE scale factor in a generic way, move the invariance setter calls to cpufreq core. As a result of setting the frequency scale factor in cpufreq core, after callbacks that lend themselves to trigger it, remove this functionality from the driver side. To be noted that despite marking a successful frequency change, many cpufreq drivers will consider the new frequency as the requested frequency, although this is might not be the one granted by the hardware. Therefore, the call to arch_set_freq_scale() is a "best effort" one, and it is up to the architecture if the new frequency is used in the new frequency scale factor setting (determined by the implementation of arch_set_freq_scale()) or eventually used by the scheduler (determined by the implementation of arch_scale_freq_capacity()). The architecture is in a better position to decide if it has better methods to obtain more accurate information regarding the current frequency and use that information instead (for example, the use of counters). Also, the implementation to arch_set_freq_scale() will now have to handle error conditions (current frequency == 0) in order to prevent the overhead in cpufreq core when the default arch_set_freq_scale() implementation is used. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Suggested-by: Valentin Schneider <valentin.schneider@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq/cpufreq-dt.c')
-rw-r--r--drivers/cpufreq/cpufreq-dt.c10
1 files changed, 1 insertions, 9 deletions
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 944d7b45afe9..9fd4ce774f12 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -40,16 +40,8 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct private_data *priv = policy->driver_data;
unsigned long freq = policy->freq_table[index].frequency;
- int ret;
-
- ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
- if (!ret) {
- arch_set_freq_scale(policy->related_cpus, freq,
- policy->cpuinfo.max_freq);
- }
-
- return ret;
+ return dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
}
/*