Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 492 deletions

diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
deleted file mode 100644
index 5c221bc90210..000000000000
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ /dev/null
@@ -1,492 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * S3C2416/2450 CPUfreq Support
- *
- * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * based on s3c64xx_cpufreq.c
- *
- * Copyright 2009 Wolfson Microelectronics plc
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-#include <linux/reboot.h>
-#include <linux/module.h>
-
-static DEFINE_MUTEX(cpufreq_lock);
-
-struct s3c2416_data {
-	struct clk *armdiv;
-	struct clk *armclk;
-	struct clk *hclk;
-
-	unsigned long regulator_latency;
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-	struct regulator *vddarm;
-#endif
-
-	struct cpufreq_frequency_table *freq_table;
-
-	bool is_dvs;
-	bool disable_dvs;
-};
-
-static struct s3c2416_data s3c2416_cpufreq;
-
-struct s3c2416_dvfs {
-	unsigned int vddarm_min;
-	unsigned int vddarm_max;
-};
-
-/* pseudo-frequency for dvs mode */
-#define FREQ_DVS	132333
-
-/* frequency to sleep and reboot in
- * it's essential to leave dvs, as some boards do not reconfigure the
- * regulator on reboot
- */
-#define FREQ_SLEEP	133333
-
-/* Sources for the ARMCLK */
-#define SOURCE_HCLK	0
-#define SOURCE_ARMDIV	1
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-/* S3C2416 only supports changing the voltage in the dvs-mode.
- * Voltages down to 1.0V seem to work, so we take what the regulator
- * can get us.
- */
-static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
-	[SOURCE_HCLK] = {  950000, 1250000 },
-	[SOURCE_ARMDIV] = { 1250000, 1350000 },
-};
-#endif
-
-static struct cpufreq_frequency_table s3c2416_freq_table[] = {
-	{ 0, SOURCE_HCLK, FREQ_DVS },
-	{ 0, SOURCE_ARMDIV, 133333 },
-	{ 0, SOURCE_ARMDIV, 266666 },
-	{ 0, SOURCE_ARMDIV, 400000 },
-	{ 0, 0, CPUFREQ_TABLE_END },
-};
-
-static struct cpufreq_frequency_table s3c2450_freq_table[] = {
-	{ 0, SOURCE_HCLK, FREQ_DVS },
-	{ 0, SOURCE_ARMDIV, 133500 },
-	{ 0, SOURCE_ARMDIV, 267000 },
-	{ 0, SOURCE_ARMDIV, 534000 },
-	{ 0, 0, CPUFREQ_TABLE_END },
-};
-
-static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
-{
-	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
-
-	if (cpu != 0)
-		return 0;
-
-	/* return our pseudo-frequency when in dvs mode */
-	if (s3c_freq->is_dvs)
-		return FREQ_DVS;
-
-	return clk_get_rate(s3c_freq->armclk) / 1000;
-}
-
-static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
-				      unsigned int freq)
-{
-	int ret;
-
-	if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
-		ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
-		if (ret < 0) {
-			pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
-			       freq, ret);
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
-{
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-	struct s3c2416_dvfs *dvfs;
-#endif
-	int ret;
-
-	if (s3c_freq->is_dvs) {
-		pr_debug("cpufreq: already in dvs mode, nothing to do\n");
-		return 0;
-	}
-
-	pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
-		 clk_get_rate(s3c_freq->hclk) / 1000);
-	ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
-	if (ret < 0) {
-		pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
-		return ret;
-	}
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-	/* changing the core voltage is only allowed when in dvs mode */
-	if (s3c_freq->vddarm) {
-		dvfs = &s3c2416_dvfs_table[idx];
-
-		pr_debug("cpufreq: setting regulator to %d-%d\n",
-			 dvfs->vddarm_min, dvfs->vddarm_max);
-		ret = regulator_set_voltage(s3c_freq->vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-
-		/* when lowering the voltage failed, there is nothing to do */
-		if (ret != 0)
-			pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
-	}
-#endif
-
-	s3c_freq->is_dvs = 1;
-
-	return 0;
-}
-
-static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
-{
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-	struct s3c2416_dvfs *dvfs;
-#endif
-	int ret;
-
-	if (!s3c_freq->is_dvs) {
-		pr_debug("cpufreq: not in dvs mode, so can't leave\n");
-		return 0;
-	}
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-	if (s3c_freq->vddarm) {
-		dvfs = &s3c2416_dvfs_table[idx];
-
-		pr_debug("cpufreq: setting regulator to %d-%d\n",
-			 dvfs->vddarm_min, dvfs->vddarm_max);
-		ret = regulator_set_voltage(s3c_freq->vddarm,
-					    dvfs->vddarm_min,
-					    dvfs->vddarm_max);
-		if (ret != 0) {
-			pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
-			return ret;
-		}
-	}
-#endif
-
-	/* force armdiv to hclk frequency for transition from dvs*/
-	if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
-		pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
-			 clk_get_rate(s3c_freq->hclk) / 1000);
-		ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
-					clk_get_rate(s3c_freq->hclk) / 1000);
-		if (ret < 0) {
-			pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n",
-			       clk_get_rate(s3c_freq->hclk) / 1000, ret);
-			return ret;
-		}
-	}
-
-	pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
-			clk_get_rate(s3c_freq->armdiv) / 1000);
-
-	ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
-	if (ret < 0) {
-		pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
-		       ret);
-		return ret;
-	}
-
-	s3c_freq->is_dvs = 0;
-
-	return 0;
-}
-
-static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
-				      unsigned int index)
-{
-	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
-	unsigned int new_freq;
-	int idx, ret, to_dvs = 0;
-
-	mutex_lock(&cpufreq_lock);
-
-	idx = s3c_freq->freq_table[index].driver_data;
-
-	if (idx == SOURCE_HCLK)
-		to_dvs = 1;
-
-	/* switching to dvs when it's not allowed */
-	if (to_dvs && s3c_freq->disable_dvs) {
-		pr_debug("cpufreq: entering dvs mode not allowed\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* When leavin dvs mode, always switch the armdiv to the hclk rate
-	 * The S3C2416 has stability issues when switching directly to
-	 * higher frequencies.
-	 */
-	new_freq = (s3c_freq->is_dvs && !to_dvs)
-				? clk_get_rate(s3c_freq->hclk) / 1000
-				: s3c_freq->freq_table[index].frequency;
-
-	if (to_dvs) {
-		pr_debug("cpufreq: enter dvs\n");
-		ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
-	} else if (s3c_freq->is_dvs) {
-		pr_debug("cpufreq: leave dvs\n");
-		ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
-	} else {
-		pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq);
-		ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq);
-	}
-
-out:
-	mutex_unlock(&cpufreq_lock);
-
-	return ret;
-}
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
-{
-	int count, v, i, found;
-	struct cpufreq_frequency_table *pos;
-	struct s3c2416_dvfs *dvfs;
-
-	count = regulator_count_voltages(s3c_freq->vddarm);
-	if (count < 0) {
-		pr_err("cpufreq: Unable to check supported voltages\n");
-		return;
-	}
-
-	if (!count)
-		goto out;
-
-	cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
-		dvfs = &s3c2416_dvfs_table[pos->driver_data];
-		found = 0;
-
-		/* Check only the min-voltage, more is always ok on S3C2416 */
-		for (i = 0; i < count; i++) {
-			v = regulator_list_voltage(s3c_freq->vddarm, i);
-			if (v >= dvfs->vddarm_min)
-				found = 1;
-		}
-
-		if (!found) {
-			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
-				 pos->frequency);
-			pos->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-	}
-
-out:
-	/* Guessed */
-	s3c_freq->regulator_latency = 1 * 1000 * 1000;
-}
-#endif
-
-static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
-					       unsigned long event, void *ptr)
-{
-	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
-	int ret;
-	struct cpufreq_policy *policy;
-
-	mutex_lock(&cpufreq_lock);
-
-	/* disable further changes */
-	s3c_freq->disable_dvs = 1;
-
-	mutex_unlock(&cpufreq_lock);
-
-	/* some boards don't reconfigure the regulator on reboot, which
-	 * could lead to undervolting the cpu when the clock is reset.
-	 * Therefore we always leave the DVS mode on reboot.
-	 */
-	if (s3c_freq->is_dvs) {
-		pr_debug("cpufreq: leave dvs on reboot\n");
-
-		policy = cpufreq_cpu_get(0);
-		if (!policy) {
-			pr_debug("cpufreq: get no policy for cpu0\n");
-			return NOTIFY_BAD;
-		}
-
-		ret = cpufreq_driver_target(policy, FREQ_SLEEP, 0);
-		cpufreq_cpu_put(policy);
-
-		if (ret < 0)
-			return NOTIFY_BAD;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
-	.notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
-};
-
-static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
-	struct cpufreq_frequency_table *pos;
-	struct clk *msysclk;
-	unsigned long rate;
-	int ret;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	msysclk = clk_get(NULL, "msysclk");
-	if (IS_ERR(msysclk)) {
-		ret = PTR_ERR(msysclk);
-		pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
-		return ret;
-	}
-
-	/*
-	 * S3C2416 and S3C2450 share the same processor-ID and also provide no
-	 * other means to distinguish them other than through the rate of
-	 * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
-	 */
-	rate = clk_get_rate(msysclk);
-	if (rate == 800 * 1000 * 1000) {
-		pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
-			rate / 1000);
-		s3c_freq->freq_table = s3c2416_freq_table;
-		policy->cpuinfo.max_freq = 400000;
-	} else if (rate / 1000 == 534000) {
-		pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
-			rate / 1000);
-		s3c_freq->freq_table = s3c2450_freq_table;
-		policy->cpuinfo.max_freq = 534000;
-	}
-
-	/* not needed anymore */
-	clk_put(msysclk);
-
-	if (s3c_freq->freq_table == NULL) {
-		pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
-		       rate / 1000);
-		return -ENODEV;
-	}
-
-	s3c_freq->is_dvs = 0;
-
-	s3c_freq->armdiv = clk_get(NULL, "armdiv");
-	if (IS_ERR(s3c_freq->armdiv)) {
-		ret = PTR_ERR(s3c_freq->armdiv);
-		pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
-		return ret;
-	}
-
-	s3c_freq->hclk = clk_get(NULL, "hclk");
-	if (IS_ERR(s3c_freq->hclk)) {
-		ret = PTR_ERR(s3c_freq->hclk);
-		pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
-		goto err_hclk;
-	}
-
-	/* chech hclk rate, we only support the common 133MHz for now
-	 * hclk could also run at 66MHz, but this not often used
-	 */
-	rate = clk_get_rate(s3c_freq->hclk);
-	if (rate < 133 * 1000 * 1000) {
-		pr_err("cpufreq: HCLK not at 133MHz\n");
-		ret = -EINVAL;
-		goto err_armclk;
-	}
-
-	s3c_freq->armclk = clk_get(NULL, "armclk");
-	if (IS_ERR(s3c_freq->armclk)) {
-		ret = PTR_ERR(s3c_freq->armclk);
-		pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
-		goto err_armclk;
-	}
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-	s3c_freq->vddarm = regulator_get(NULL, "vddarm");
-	if (IS_ERR(s3c_freq->vddarm)) {
-		ret = PTR_ERR(s3c_freq->vddarm);
-		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
-		goto err_vddarm;
-	}
-
-	s3c2416_cpufreq_cfg_regulator(s3c_freq);
-#else
-	s3c_freq->regulator_latency = 0;
-#endif
-
-	cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
-		/* special handling for dvs mode */
-		if (pos->driver_data == 0) {
-			if (!s3c_freq->hclk) {
-				pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
-					 pos->frequency);
-				pos->frequency = CPUFREQ_ENTRY_INVALID;
-			} else {
-				continue;
-			}
-		}
-
-		/* Check for frequencies we can generate */
-		rate = clk_round_rate(s3c_freq->armdiv,
-				      pos->frequency * 1000);
-		rate /= 1000;
-		if (rate != pos->frequency) {
-			pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
-				pos->frequency, rate);
-			pos->frequency = CPUFREQ_ENTRY_INVALID;
-		}
-	}
-
-	/* Datasheet says PLL stabalisation time must be at least 300us,
-	 * so but add some fudge. (reference in LOCKCON0 register description)
-	 */
-	cpufreq_generic_init(policy, s3c_freq->freq_table,
-			(500 * 1000) + s3c_freq->regulator_latency);
-	register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
-
-	return 0;
-
-#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-err_vddarm:
-	clk_put(s3c_freq->armclk);
-#endif
-err_armclk:
-	clk_put(s3c_freq->hclk);
-err_hclk:
-	clk_put(s3c_freq->armdiv);
-
-	return ret;
-}
-
-static struct cpufreq_driver s3c2416_cpufreq_driver = {
-	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify		= cpufreq_generic_frequency_table_verify,
-	.target_index	= s3c2416_cpufreq_set_target,
-	.get		= s3c2416_cpufreq_get_speed,
-	.init		= s3c2416_cpufreq_driver_init,
-	.name		= "s3c2416",
-	.attr		= cpufreq_generic_attr,
-};
-
-static int __init s3c2416_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&s3c2416_cpufreq_driver);
-}
-module_init(s3c2416_cpufreq_init);