summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorRafael J. Wysocki <rafael.j.wysocki@intel.com>2014-10-03 17:41:16 +0400
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2014-10-03 17:41:16 +0400
commit6f1293ff747ddcb696d546e3efcd31f7cc42b9a5 (patch)
treea11d54bb4493dbd40925bf4b2f4dcdf9de64b4d3 /drivers/cpufreq
parentb1b12babe3b72cfb08b875245e5a5d7c2747c772 (diff)
parentf9739d27059d8fd7b64096ea7251608628b5bd30 (diff)
downloadlinux-6f1293ff747ddcb696d546e3efcd31f7cc42b9a5.tar.xz
Merge back cpufreq material for v3.18.
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig8
-rw-r--r--drivers/cpufreq/Kconfig.arm2
-rw-r--r--drivers/cpufreq/Makefile2
-rw-r--r--drivers/cpufreq/cpufreq-cpu0.c248
-rw-r--r--drivers/cpufreq/cpufreq-dt.c364
-rw-r--r--drivers/cpufreq/cpufreq.c8
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c2
-rw-r--r--drivers/cpufreq/exynos4x12-cpufreq.c2
-rw-r--r--drivers/cpufreq/exynos5250-cpufreq.c2
-rw-r--r--drivers/cpufreq/highbank-cpufreq.c6
-rw-r--r--drivers/cpufreq/powernv-cpufreq.c44
-rw-r--r--drivers/cpufreq/ppc-corenet-cpufreq.c1
-rw-r--r--drivers/cpufreq/s5pv210-cpufreq.c2
13 files changed, 425 insertions, 266 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index ffe350f86bca..3489f8f5fada 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -183,14 +183,14 @@ config CPU_FREQ_GOV_CONSERVATIVE
If in doubt, say N.
-config GENERIC_CPUFREQ_CPU0
- tristate "Generic CPU0 cpufreq driver"
+config CPUFREQ_DT
+ tristate "Generic DT based cpufreq driver"
depends on HAVE_CLK && OF
- # if CPU_THERMAL is on and THERMAL=m, CPU0 cannot be =y:
+ # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
depends on !CPU_THERMAL || THERMAL
select PM_OPP
help
- This adds a generic cpufreq driver for CPU0 frequency management.
+ This adds a generic DT based cpufreq driver for frequency management.
It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
systems which share clock and voltage across all CPUs.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 7364a538e056..48ed28b789f7 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -92,7 +92,7 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
- depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR
+ depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
default m
help
This adds the CPUFreq driver for Calxeda Highbank SoC
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index db6d9a2fea4d..40c53dc1937e 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
-obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o
+obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
##################################################################################
# x86 drivers.
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
deleted file mode 100644
index 0d2172b07765..000000000000
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- *
- * The OPP code in function cpu0_set_target() is reused from
- * drivers/cpufreq/omap-cpufreq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/clk.h>
-#include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
-#include <linux/cpumask.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/pm_opp.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <linux/thermal.h>
-
-static unsigned int transition_latency;
-static unsigned int voltage_tolerance; /* in percentage */
-
-static struct device *cpu_dev;
-static struct clk *cpu_clk;
-static struct regulator *cpu_reg;
-static struct cpufreq_frequency_table *freq_table;
-static struct thermal_cooling_device *cdev;
-
-static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
-{
- struct dev_pm_opp *opp;
- unsigned long volt = 0, volt_old = 0, tol = 0;
- unsigned int old_freq, new_freq;
- long freq_Hz, freq_exact;
- int ret;
-
- freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
- if (freq_Hz <= 0)
- freq_Hz = freq_table[index].frequency * 1000;
-
- freq_exact = freq_Hz;
- new_freq = freq_Hz / 1000;
- old_freq = clk_get_rate(cpu_clk) / 1000;
-
- if (!IS_ERR(cpu_reg)) {
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- pr_err("failed to find OPP for %ld\n", freq_Hz);
- return PTR_ERR(opp);
- }
- volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
- tol = volt * voltage_tolerance / 100;
- volt_old = regulator_get_voltage(cpu_reg);
- }
-
- pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
- old_freq / 1000, volt_old ? volt_old / 1000 : -1,
- new_freq / 1000, volt ? volt / 1000 : -1);
-
- /* scaling up? scale voltage before frequency */
- if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
- ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
- if (ret) {
- pr_err("failed to scale voltage up: %d\n", ret);
- return ret;
- }
- }
-
- ret = clk_set_rate(cpu_clk, freq_exact);
- if (ret) {
- pr_err("failed to set clock rate: %d\n", ret);
- if (!IS_ERR(cpu_reg))
- regulator_set_voltage_tol(cpu_reg, volt_old, tol);
- return ret;
- }
-
- /* scaling down? scale voltage after frequency */
- if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
- ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
- if (ret) {
- pr_err("failed to scale voltage down: %d\n", ret);
- clk_set_rate(cpu_clk, old_freq * 1000);
- }
- }
-
- return ret;
-}
-
-static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
-{
- policy->clk = cpu_clk;
- return cpufreq_generic_init(policy, freq_table, transition_latency);
-}
-
-static struct cpufreq_driver cpu0_cpufreq_driver = {
- .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = cpu0_set_target,
- .get = cpufreq_generic_get,
- .init = cpu0_cpufreq_init,
- .name = "generic_cpu0",
- .attr = cpufreq_generic_attr,
-};
-
-static int cpu0_cpufreq_probe(struct platform_device *pdev)
-{
- struct device_node *np;
- int ret;
-
- cpu_dev = get_cpu_device(0);
- if (!cpu_dev) {
- pr_err("failed to get cpu0 device\n");
- return -ENODEV;
- }
-
- np = of_node_get(cpu_dev->of_node);
- if (!np) {
- pr_err("failed to find cpu0 node\n");
- return -ENOENT;
- }
-
- cpu_reg = regulator_get_optional(cpu_dev, "cpu0");
- if (IS_ERR(cpu_reg)) {
- /*
- * If cpu0 regulator supply node is present, but regulator is
- * not yet registered, we should try defering probe.
- */
- if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
- dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
- ret = -EPROBE_DEFER;
- goto out_put_node;
- }
- pr_warn("failed to get cpu0 regulator: %ld\n",
- PTR_ERR(cpu_reg));
- }
-
- cpu_clk = clk_get(cpu_dev, NULL);
- if (IS_ERR(cpu_clk)) {
- ret = PTR_ERR(cpu_clk);
- pr_err("failed to get cpu0 clock: %d\n", ret);
- goto out_put_reg;
- }
-
- /* OPPs might be populated at runtime, don't check for error here */
- of_init_opp_table(cpu_dev);
-
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
- if (ret) {
- pr_err("failed to init cpufreq table: %d\n", ret);
- goto out_put_clk;
- }
-
- of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance);
-
- if (of_property_read_u32(np, "clock-latency", &transition_latency))
- transition_latency = CPUFREQ_ETERNAL;
-
- if (!IS_ERR(cpu_reg)) {
- struct dev_pm_opp *opp;
- unsigned long min_uV, max_uV;
- int i;
-
- /*
- * OPP is maintained in order of increasing frequency, and
- * freq_table initialised from OPP is therefore sorted in the
- * same order.
- */
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
- ;
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_exact(cpu_dev,
- freq_table[0].frequency * 1000, true);
- min_uV = dev_pm_opp_get_voltage(opp);
- opp = dev_pm_opp_find_freq_exact(cpu_dev,
- freq_table[i-1].frequency * 1000, true);
- max_uV = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
- ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
- if (ret > 0)
- transition_latency += ret * 1000;
- }
-
- ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
- if (ret) {
- pr_err("failed register driver: %d\n", ret);
- goto out_free_table;
- }
-
- /*
- * For now, just loading the cooling device;
- * thermal DT code takes care of matching them.
- */
- if (of_find_property(np, "#cooling-cells", NULL)) {
- cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
- if (IS_ERR(cdev))
- pr_err("running cpufreq without cooling device: %ld\n",
- PTR_ERR(cdev));
- }
-
- of_node_put(np);
- return 0;
-
-out_free_table:
- dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-out_put_clk:
- if (!IS_ERR(cpu_clk))
- clk_put(cpu_clk);
-out_put_reg:
- if (!IS_ERR(cpu_reg))
- regulator_put(cpu_reg);
-out_put_node:
- of_node_put(np);
- return ret;
-}
-
-static int cpu0_cpufreq_remove(struct platform_device *pdev)
-{
- cpufreq_cooling_unregister(cdev);
- cpufreq_unregister_driver(&cpu0_cpufreq_driver);
- dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-
- return 0;
-}
-
-static struct platform_driver cpu0_cpufreq_platdrv = {
- .driver = {
- .name = "cpufreq-cpu0",
- .owner = THIS_MODULE,
- },
- .probe = cpu0_cpufreq_probe,
- .remove = cpu0_cpufreq_remove,
-};
-module_platform_driver(cpu0_cpufreq_platdrv);
-
-MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
-MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
new file mode 100644
index 000000000000..6bbb8b913446
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2014 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * The OPP code in function set_target() is reused from
+ * drivers/cpufreq/omap-cpufreq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpu_cooling.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+struct private_data {
+ struct device *cpu_dev;
+ struct regulator *cpu_reg;
+ struct thermal_cooling_device *cdev;
+ unsigned int voltage_tolerance; /* in percentage */
+};
+
+static int set_target(struct cpufreq_policy *policy, unsigned int index)
+{
+ struct dev_pm_opp *opp;
+ struct cpufreq_frequency_table *freq_table = policy->freq_table;
+ struct clk *cpu_clk = policy->clk;
+ struct private_data *priv = policy->driver_data;
+ struct device *cpu_dev = priv->cpu_dev;
+ struct regulator *cpu_reg = priv->cpu_reg;
+ unsigned long volt = 0, volt_old = 0, tol = 0;
+ unsigned int old_freq, new_freq;
+ long freq_Hz, freq_exact;
+ int ret;
+
+ freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
+ if (freq_Hz <= 0)
+ freq_Hz = freq_table[index].frequency * 1000;
+
+ freq_exact = freq_Hz;
+ new_freq = freq_Hz / 1000;
+ old_freq = clk_get_rate(cpu_clk) / 1000;
+
+ if (!IS_ERR(cpu_reg)) {
+ rcu_read_lock();
+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ dev_err(cpu_dev, "failed to find OPP for %ld\n",
+ freq_Hz);
+ return PTR_ERR(opp);
+ }
+ volt = dev_pm_opp_get_voltage(opp);
+ rcu_read_unlock();
+ tol = volt * priv->voltage_tolerance / 100;
+ volt_old = regulator_get_voltage(cpu_reg);
+ }
+
+ dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
+ old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+ new_freq / 1000, volt ? volt / 1000 : -1);
+
+ /* scaling up? scale voltage before frequency */
+ if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
+ ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
+ if (ret) {
+ dev_err(cpu_dev, "failed to scale voltage up: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ ret = clk_set_rate(cpu_clk, freq_exact);
+ if (ret) {
+ dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
+ if (!IS_ERR(cpu_reg))
+ regulator_set_voltage_tol(cpu_reg, volt_old, tol);
+ return ret;
+ }
+
+ /* scaling down? scale voltage after frequency */
+ if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
+ ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
+ if (ret) {
+ dev_err(cpu_dev, "failed to scale voltage down: %d\n",
+ ret);
+ clk_set_rate(cpu_clk, old_freq * 1000);
+ }
+ }
+
+ return ret;
+}
+
+static int allocate_resources(int cpu, struct device **cdev,
+ struct regulator **creg, struct clk **cclk)
+{
+ struct device *cpu_dev;
+ struct regulator *cpu_reg;
+ struct clk *cpu_clk;
+ int ret = 0;
+ char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg;
+
+ cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev) {
+ pr_err("failed to get cpu%d device\n", cpu);
+ return -ENODEV;
+ }
+
+ /* Try "cpu0" for older DTs */
+ if (!cpu)
+ reg = reg_cpu0;
+ else
+ reg = reg_cpu;
+
+try_again:
+ cpu_reg = regulator_get_optional(cpu_dev, reg);
+ if (IS_ERR(cpu_reg)) {
+ /*
+ * If cpu's regulator supply node is present, but regulator is
+ * not yet registered, we should try defering probe.
+ */
+ if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
+ dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n",
+ cpu);
+ return -EPROBE_DEFER;
+ }
+
+ /* Try with "cpu-supply" */
+ if (reg == reg_cpu0) {
+ reg = reg_cpu;
+ goto try_again;
+ }
+
+ dev_warn(cpu_dev, "failed to get cpu%d regulator: %ld\n",
+ cpu, PTR_ERR(cpu_reg));
+ }
+
+ cpu_clk = clk_get(cpu_dev, NULL);
+ if (IS_ERR(cpu_clk)) {
+ /* put regulator */
+ if (!IS_ERR(cpu_reg))
+ regulator_put(cpu_reg);
+
+ ret = PTR_ERR(cpu_clk);
+
+ /*
+ * If cpu's clk node is present, but clock is not yet
+ * registered, we should try defering probe.
+ */
+ if (ret == -EPROBE_DEFER)
+ dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
+ else
+ dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret,
+ cpu);
+ } else {
+ *cdev = cpu_dev;
+ *creg = cpu_reg;
+ *cclk = cpu_clk;
+ }
+
+ return ret;
+}
+
+static int cpufreq_init(struct cpufreq_policy *policy)
+{
+ struct cpufreq_frequency_table *freq_table;
+ struct thermal_cooling_device *cdev;
+ struct device_node *np;
+ struct private_data *priv;
+ struct device *cpu_dev;
+ struct regulator *cpu_reg;
+ struct clk *cpu_clk;
+ unsigned int transition_latency;
+ int ret;
+
+ ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
+ if (ret) {
+ pr_err("%s: Failed to allocate resources\n: %d", __func__, ret);
+ return ret;
+ }
+
+ np = of_node_get(cpu_dev->of_node);
+ if (!np) {
+ dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu);
+ ret = -ENOENT;
+ goto out_put_reg_clk;
+ }
+
+ /* OPPs might be populated at runtime, don't check for error here */
+ of_init_opp_table(cpu_dev);
+
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+ goto out_put_node;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out_free_table;
+ }
+
+ of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
+
+ if (of_property_read_u32(np, "clock-latency", &transition_latency))
+ transition_latency = CPUFREQ_ETERNAL;
+
+ if (!IS_ERR(cpu_reg)) {
+ struct dev_pm_opp *opp;
+ unsigned long min_uV, max_uV;
+ int i;
+
+ /*
+ * OPP is maintained in order of increasing frequency, and
+ * freq_table initialised from OPP is therefore sorted in the
+ * same order.
+ */
+ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
+ ;
+ rcu_read_lock();
+ opp = dev_pm_opp_find_freq_exact(cpu_dev,
+ freq_table[0].frequency * 1000, true);
+ min_uV = dev_pm_opp_get_voltage(opp);
+ opp = dev_pm_opp_find_freq_exact(cpu_dev,
+ freq_table[i-1].frequency * 1000, true);
+ max_uV = dev_pm_opp_get_voltage(opp);
+ rcu_read_unlock();
+ ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
+ if (ret > 0)
+ transition_latency += ret * 1000;
+ }
+
+ /*
+ * For now, just loading the cooling device;
+ * thermal DT code takes care of matching them.
+ */
+ if (of_find_property(np, "#cooling-cells", NULL)) {
+ cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
+ if (IS_ERR(cdev))
+ dev_err(cpu_dev,
+ "running cpufreq without cooling device: %ld\n",
+ PTR_ERR(cdev));
+ else
+ priv->cdev = cdev;
+ }
+
+ priv->cpu_dev = cpu_dev;
+ priv->cpu_reg = cpu_reg;
+ policy->driver_data = priv;
+
+ policy->clk = cpu_clk;
+ ret = cpufreq_generic_init(policy, freq_table, transition_latency);
+ if (ret)
+ goto out_cooling_unregister;
+
+ of_node_put(np);
+
+ return 0;
+
+out_cooling_unregister:
+ cpufreq_cooling_unregister(priv->cdev);
+ kfree(priv);
+out_free_table:
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_put_node:
+ of_node_put(np);
+out_put_reg_clk:
+ clk_put(cpu_clk);
+ if (!IS_ERR(cpu_reg))
+ regulator_put(cpu_reg);
+
+ return ret;
+}
+
+static int cpufreq_exit(struct cpufreq_policy *policy)
+{
+ struct private_data *priv = policy->driver_data;
+
+ cpufreq_cooling_unregister(priv->cdev);
+ dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
+ clk_put(policy->clk);
+ if (!IS_ERR(priv->cpu_reg))
+ regulator_put(priv->cpu_reg);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct cpufreq_driver dt_cpufreq_driver = {
+ .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = set_target,
+ .get = cpufreq_generic_get,
+ .init = cpufreq_init,
+ .exit = cpufreq_exit,
+ .name = "cpufreq-dt",
+ .attr = cpufreq_generic_attr,
+};
+
+static int dt_cpufreq_probe(struct platform_device *pdev)
+{
+ struct device *cpu_dev;
+ struct regulator *cpu_reg;
+ struct clk *cpu_clk;
+ int ret;
+
+ /*
+ * All per-cluster (CPUs sharing clock/voltages) initialization is done
+ * from ->init(). In probe(), we just need to make sure that clk and
+ * regulators are available. Else defer probe and retry.
+ *
+ * FIXME: Is checking this only for CPU0 sufficient ?
+ */
+ ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk);
+ if (ret)
+ return ret;
+
+ clk_put(cpu_clk);
+ if (!IS_ERR(cpu_reg))
+ regulator_put(cpu_reg);
+
+ ret = cpufreq_register_driver(&dt_cpufreq_driver);
+ if (ret)
+ dev_err(cpu_dev, "failed register driver: %d\n", ret);
+
+ return ret;
+}
+
+static int dt_cpufreq_remove(struct platform_device *pdev)
+{
+ cpufreq_unregister_driver(&dt_cpufreq_driver);
+ return 0;
+}
+
+static struct platform_driver dt_cpufreq_platdrv = {
+ .driver = {
+ .name = "cpufreq-dt",
+ .owner = THIS_MODULE,
+ },
+ .probe = dt_cpufreq_probe,
+ .remove = dt_cpufreq_remove,
+};
+module_platform_driver(dt_cpufreq_platdrv);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Generic cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 61190f6b4829..24bf76fba141 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -437,7 +437,7 @@ static struct cpufreq_governor *__find_governor(const char *str_governor)
struct cpufreq_governor *t;
list_for_each_entry(t, &cpufreq_governor_list, governor_list)
- if (!strnicmp(str_governor, t->name, CPUFREQ_NAME_LEN))
+ if (!strncasecmp(str_governor, t->name, CPUFREQ_NAME_LEN))
return t;
return NULL;
@@ -455,10 +455,10 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
goto out;
if (cpufreq_driver->setpolicy) {
- if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
+ if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_PERFORMANCE;
err = 0;
- } else if (!strnicmp(str_governor, "powersave",
+ } else if (!strncasecmp(str_governor, "powersave",
CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_POWERSAVE;
err = 0;
@@ -1382,7 +1382,7 @@ static int __cpufreq_remove_dev_prepare(struct device *dev,
if (!cpufreq_suspended)
pr_debug("%s: policy Kobject moved to cpu: %d from: %d\n",
__func__, new_cpu, cpu);
- } else if (cpufreq_driver->stop_cpu && cpufreq_driver->setpolicy) {
+ } else if (cpufreq_driver->stop_cpu) {
cpufreq_driver->stop_cpu(policy);
}
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index 61a54310a1b9..843ec824fd91 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -127,7 +127,7 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
if (!np) {
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 351a2074cfea..9e78a850e29f 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -174,7 +174,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
if (!np) {
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index c91ce69dc631..3eafdc7ba787 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -153,7 +153,7 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
if (!np) {
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
index bf8902a0866d..ec399ad2f059 100644
--- a/drivers/cpufreq/highbank-cpufreq.c
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -6,7 +6,7 @@
* published by the Free Software Foundation.
*
* This driver provides the clk notifier callbacks that are used when
- * the cpufreq-cpu0 driver changes to frequency to alert the highbank
+ * the cpufreq-dt driver changes to frequency to alert the highbank
* EnergyCore Management Engine (ECME) about the need to change
* voltage. The ECME interfaces with the actual voltage regulators.
*/
@@ -60,7 +60,7 @@ static struct notifier_block hb_cpufreq_clk_nb = {
static int hb_cpufreq_driver_init(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+ struct platform_device_info devinfo = { .name = "cpufreq-dt", };
struct device *cpu_dev;
struct clk *cpu_clk;
struct device_node *np;
@@ -95,7 +95,7 @@ static int hb_cpufreq_driver_init(void)
goto out_put_node;
}
- /* Instantiate cpufreq-cpu0 */
+ /* Instantiate cpufreq-dt */
platform_device_register_full(&devinfo);
out_put_node:
diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index 379c0837f5a9..2dfd4fdb5a52 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -26,6 +26,7 @@
#include <linux/cpufreq.h>
#include <linux/smp.h>
#include <linux/of.h>
+#include <linux/reboot.h>
#include <asm/cputhreads.h>
#include <asm/firmware.h>
@@ -35,6 +36,7 @@
#define POWERNV_MAX_PSTATES 256
static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
+static bool rebooting;
/*
* Note: The set of pstates consists of contiguous integers, the
@@ -284,6 +286,15 @@ static void set_pstate(void *freq_data)
}
/*
+ * get_nominal_index: Returns the index corresponding to the nominal
+ * pstate in the cpufreq table
+ */
+static inline unsigned int get_nominal_index(void)
+{
+ return powernv_pstate_info.max - powernv_pstate_info.nominal;
+}
+
+/*
* powernv_cpufreq_target_index: Sets the frequency corresponding to
* the cpufreq table entry indexed by new_index on the cpus in the
* mask policy->cpus
@@ -293,6 +304,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
{
struct powernv_smp_call_data freq_data;
+ if (unlikely(rebooting) && new_index != get_nominal_index())
+ return 0;
+
freq_data.pstate_id = powernv_freqs[new_index].driver_data;
/*
@@ -317,6 +331,33 @@ static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
return cpufreq_table_validate_and_show(policy, powernv_freqs);
}
+static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ int cpu;
+ struct cpufreq_policy cpu_policy;
+
+ rebooting = true;
+ for_each_online_cpu(cpu) {
+ cpufreq_get_policy(&cpu_policy, cpu);
+ powernv_cpufreq_target_index(&cpu_policy, get_nominal_index());
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block powernv_cpufreq_reboot_nb = {
+ .notifier_call = powernv_cpufreq_reboot_notifier,
+};
+
+static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
+{
+ struct powernv_smp_call_data freq_data;
+
+ freq_data.pstate_id = powernv_pstate_info.min;
+ smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1);
+}
+
static struct cpufreq_driver powernv_cpufreq_driver = {
.name = "powernv-cpufreq",
.flags = CPUFREQ_CONST_LOOPS,
@@ -324,6 +365,7 @@ static struct cpufreq_driver powernv_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
.target_index = powernv_cpufreq_target_index,
.get = powernv_cpufreq_get,
+ .stop_cpu = powernv_cpufreq_stop_cpu,
.attr = powernv_cpu_freq_attr,
};
@@ -342,12 +384,14 @@ static int __init powernv_cpufreq_init(void)
return rc;
}
+ register_reboot_notifier(&powernv_cpufreq_reboot_nb);
return cpufreq_register_driver(&powernv_cpufreq_driver);
}
module_init(powernv_cpufreq_init);
static void __exit powernv_cpufreq_exit(void)
{
+ unregister_reboot_notifier(&powernv_cpufreq_reboot_nb);
cpufreq_unregister_driver(&powernv_cpufreq_driver);
}
module_exit(powernv_cpufreq_exit);
diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c
index 3607070797af..bee5df7794d3 100644
--- a/drivers/cpufreq/ppc-corenet-cpufreq.c
+++ b/drivers/cpufreq/ppc-corenet-cpufreq.c
@@ -199,7 +199,6 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy)
}
data->table = table;
- per_cpu(cpu_data, cpu) = data;
/* update ->cpus if we have cluster, no harm if not */
cpumask_copy(policy->cpus, per_cpu(cpu_mask, cpu));
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 3f9791f07b8e..567caa6313ff 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -597,7 +597,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
* and dependencies on platform headers. It is necessary to enable
* S5PV210 multi-platform support and will be removed together with
* this whole driver as soon as S5PV210 gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock");
if (!np) {