summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorRafael J. Wysocki <rafael.j.wysocki@intel.com>2017-12-21 03:56:49 +0300
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2017-12-21 03:56:49 +0300
commit6b3429449ef7874d069703345570e3ca980a7c20 (patch)
tree3c7a6876fc73bfc88453397e1764083bd9ee92d2 /drivers/cpufreq
parent56026645e2b6f11ede34a5e6ab69d3eb56f9c8fc (diff)
parent9a835fa6e47f27b1ae71390b6f12efce7335aaac (diff)
downloadlinux-6b3429449ef7874d069703345570e3ca980a7c20.tar.xz
Merge back cpufreq material for v4.16.
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig.arm88
-rw-r--r--drivers/cpufreq/Makefile9
-rw-r--r--drivers/cpufreq/armada-37xx-cpufreq.c241
-rw-r--r--drivers/cpufreq/cpufreq-dt-platdev.c8
-rw-r--r--drivers/cpufreq/cpufreq.c55
-rw-r--r--drivers/cpufreq/longhaul.c2
-rw-r--r--drivers/cpufreq/mediatek-cpufreq.c1
-rw-r--r--drivers/cpufreq/mvebu-cpufreq.c16
-rw-r--r--drivers/cpufreq/ti-cpufreq.c51
9 files changed, 387 insertions, 84 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index bdce4488ded1..3a88e33b0cfe 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,29 @@
# ARM CPU Frequency scaling drivers
#
+config ACPI_CPPC_CPUFREQ
+ tristate "CPUFreq driver based on the ACPI CPPC spec"
+ depends on ACPI_PROCESSOR
+ select ACPI_CPPC_LIB
+ help
+ This adds a CPUFreq driver which uses CPPC methods
+ as described in the ACPIv5.1 spec. CPPC stands for
+ Collaborative Processor Performance Controls. It
+ is based on an abstract continuous scale of CPU
+ performance values which allows the remote power
+ processor to flexibly optimize for power and
+ performance. CPPC relies on power management firmware
+ support for its operation.
+
+ If in doubt, say N.
+
+config ARM_ARMADA_37XX_CPUFREQ
+ tristate "Armada 37xx CPUFreq support"
+ depends on ARCH_MVEBU
+ help
+ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
+ The Armada 37xx PMU supports 4 frequency and VDD levels.
+
# big LITTLE core layer and glue drivers
config ARM_BIG_LITTLE_CPUFREQ
tristate "Generic ARM big LITTLE CPUfreq driver"
@@ -12,6 +35,30 @@ config ARM_BIG_LITTLE_CPUFREQ
help
This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
+config ARM_DT_BL_CPUFREQ
+ tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && OF
+ help
+ This enables probing via DT for Generic CPUfreq driver for ARM
+ big.LITTLE platform. This gets frequency tables from DT.
+
+config ARM_SCPI_CPUFREQ
+ tristate "SCPI based CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
+ help
+ This adds the CPUfreq driver support for ARM big.LITTLE platforms
+ using SCPI protocol for CPU power management.
+
+ This driver uses SCPI Message Protocol driver to interact with the
+ firmware providing the CPU DVFS functionality.
+
+config ARM_VEXPRESS_SPC_CPUFREQ
+ tristate "Versatile Express SPC based CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
+ help
+ This add the CPUfreq driver support for Versatile Express
+ big.LITTLE platforms using SPC for power management.
+
config ARM_BRCMSTB_AVS_CPUFREQ
tristate "Broadcom STB AVS CPUfreq driver"
depends on ARCH_BRCMSTB || COMPILE_TEST
@@ -33,20 +80,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
If in doubt, say N.
-config ARM_DT_BL_CPUFREQ
- tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
- depends on ARM_BIG_LITTLE_CPUFREQ && OF
- help
- This enables probing via DT for Generic CPUfreq driver for ARM
- big.LITTLE platform. This gets frequency tables from DT.
-
-config ARM_VEXPRESS_SPC_CPUFREQ
- tristate "Versatile Express SPC based CPUfreq driver"
- depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
- help
- This add the CPUfreq driver support for Versatile Express
- big.LITTLE platforms using SPC for power management.
-
config ARM_EXYNOS5440_CPUFREQ
tristate "SAMSUNG EXYNOS5440"
depends on SOC_EXYNOS5440
@@ -205,16 +238,6 @@ config ARM_SA1100_CPUFREQ
config ARM_SA1110_CPUFREQ
bool
-config ARM_SCPI_CPUFREQ
- tristate "SCPI based CPUfreq driver"
- depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
- help
- This adds the CPUfreq driver support for ARM big.LITTLE platforms
- using SCPI protocol for CPU power management.
-
- This driver uses SCPI Message Protocol driver to interact with the
- firmware providing the CPU DVFS functionality.
-
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
@@ -275,20 +298,3 @@ config ARM_PXA2xx_CPUFREQ
This add the CPUFreq driver support for Intel PXA2xx SOCs.
If in doubt, say N.
-
-config ACPI_CPPC_CPUFREQ
- tristate "CPUFreq driver based on the ACPI CPPC spec"
- depends on ACPI_PROCESSOR
- select ACPI_CPPC_LIB
- default n
- help
- This adds a CPUFreq driver which uses CPPC methods
- as described in the ACPIv5.1 spec. CPPC stands for
- Collaborative Processor Performance Controls. It
- is based on an abstract continuous scale of CPU
- performance values which allows the remote power
- processor to flexibly optimize for power and
- performance. CPPC relies on power management firmware
- support for its operation.
-
- If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 812f9e0d01a3..e07715ce8844 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -52,23 +52,26 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o
# LITTLE drivers, so that it is probed last.
obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
+obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
+obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
@@ -81,8 +84,6 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o
obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
-obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
-obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
##################################################################################
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
new file mode 100644
index 000000000000..c6ebc88a7d8d
--- /dev/null
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CPU frequency scaling support for Armada 37xx platform.
+ *
+ * Copyright (C) 2017 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* Power management in North Bridge register set */
+#define ARMADA_37XX_NB_L0L1 0x18
+#define ARMADA_37XX_NB_L2L3 0x1C
+#define ARMADA_37XX_NB_TBG_DIV_OFF 13
+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
+#define ARMADA_37XX_NB_CLK_SEL_OFF 11
+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
+#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1
+#define ARMADA_37XX_NB_TBG_SEL_OFF 9
+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
+#define ARMADA_37XX_NB_VDD_SEL_OFF 6
+#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3
+#define ARMADA_37XX_NB_CONFIG_SHIFT 16
+#define ARMADA_37XX_NB_DYN_MOD 0x24
+#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26)
+#define ARMADA_37XX_NB_TBG_EN BIT(28)
+#define ARMADA_37XX_NB_DIV_EN BIT(29)
+#define ARMADA_37XX_NB_VDD_EN BIT(30)
+#define ARMADA_37XX_NB_DFS_EN BIT(31)
+#define ARMADA_37XX_NB_CPU_LOAD 0x30
+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
+#define ARMADA_37XX_DVFS_LOAD_0 0
+#define ARMADA_37XX_DVFS_LOAD_1 1
+#define ARMADA_37XX_DVFS_LOAD_2 2
+#define ARMADA_37XX_DVFS_LOAD_3 3
+
+/*
+ * On Armada 37xx the Power management manages 4 level of CPU load,
+ * each level can be associated with a CPU clock source, a CPU
+ * divider, a VDD level, etc...
+ */
+#define LOAD_LEVEL_NR 4
+
+struct armada_37xx_dvfs {
+ u32 cpu_freq_max;
+ u8 divider[LOAD_LEVEL_NR];
+};
+
+static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
+ {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
+ {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
+ {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} },
+ {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} },
+};
+
+static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
+ if (freq == armada_37xx_dvfs[i].cpu_freq_max)
+ return &armada_37xx_dvfs[i];
+ }
+
+ pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
+ return NULL;
+}
+
+/*
+ * Setup the four level managed by the hardware. Once the four level
+ * will be configured then the DVFS will be enabled.
+ */
+static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
+ struct clk *clk, u8 *divider)
+{
+ int load_lvl;
+ struct clk *parent;
+
+ for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
+ unsigned int reg, mask, val, offset = 0;
+
+ if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
+ reg = ARMADA_37XX_NB_L0L1;
+ else
+ reg = ARMADA_37XX_NB_L2L3;
+
+ if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
+ load_lvl == ARMADA_37XX_DVFS_LOAD_2)
+ offset += ARMADA_37XX_NB_CONFIG_SHIFT;
+
+ /* Set cpu clock source, for all the level we use TBG */
+ val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
+ mask = (ARMADA_37XX_NB_CLK_SEL_MASK
+ << ARMADA_37XX_NB_CLK_SEL_OFF);
+
+ /*
+ * Set cpu divider based on the pre-computed array in
+ * order to have balanced step.
+ */
+ val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
+ mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
+ << ARMADA_37XX_NB_TBG_DIV_OFF);
+
+ /* Set VDD divider which is actually the load level. */
+ val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
+ mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
+ << ARMADA_37XX_NB_VDD_SEL_OFF);
+
+ val <<= offset;
+ mask <<= offset;
+
+ regmap_update_bits(base, reg, mask, val);
+ }
+
+ /*
+ * Set cpu clock source, for all the level we keep the same
+ * clock source that the one already configured. For this one
+ * we need to use the clock framework
+ */
+ parent = clk_get_parent(clk);
+ clk_set_parent(clk, parent);
+}
+
+static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
+{
+ unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
+ mask = ARMADA_37XX_NB_DFS_EN;
+
+ regmap_update_bits(base, reg, mask, 0);
+}
+
+static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
+{
+ unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
+
+ /* Start with the highest load (0) */
+ val = ARMADA_37XX_DVFS_LOAD_0;
+ regmap_update_bits(base, reg, mask, val);
+
+ /* Now enable DVFS for the CPUs */
+ reg = ARMADA_37XX_NB_DYN_MOD;
+ mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
+ ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
+ ARMADA_37XX_NB_DFS_EN;
+
+ regmap_update_bits(base, reg, mask, mask);
+}
+
+static int __init armada37xx_cpufreq_driver_init(void)
+{
+ struct armada_37xx_dvfs *dvfs;
+ struct platform_device *pdev;
+ unsigned int cur_frequency;
+ struct regmap *nb_pm_base;
+ struct device *cpu_dev;
+ int load_lvl, ret;
+ struct clk *clk;
+
+ nb_pm_base =
+ syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
+
+ if (IS_ERR(nb_pm_base))
+ return -ENODEV;
+
+ /* Before doing any configuration on the DVFS first, disable it */
+ armada37xx_cpufreq_disable_dvfs(nb_pm_base);
+
+ /*
+ * On CPU 0 register the operating points supported (which are
+ * the nominal CPU frequency and full integer divisions of
+ * it).
+ */
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ dev_err(cpu_dev, "Cannot get CPU\n");
+ return -ENODEV;
+ }
+
+ clk = clk_get(cpu_dev, 0);
+ if (IS_ERR(clk)) {
+ dev_err(cpu_dev, "Cannot get clock for CPU0\n");
+ return PTR_ERR(clk);
+ }
+
+ /* Get nominal (current) CPU frequency */
+ cur_frequency = clk_get_rate(clk);
+ if (!cur_frequency) {
+ dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
+ return -EINVAL;
+ }
+
+ dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
+ if (!dvfs)
+ return -EINVAL;
+
+ armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
+
+ for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
+ load_lvl++) {
+ unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
+
+ ret = dev_pm_opp_add(cpu_dev, freq, 0);
+ if (ret) {
+ /* clean-up the already added opp before leaving */
+ while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
+ freq = cur_frequency / dvfs->divider[load_lvl];
+ dev_pm_opp_remove(cpu_dev, freq);
+ }
+ return ret;
+ }
+ }
+
+ /* Now that everything is setup, enable the DVFS at hardware level */
+ armada37xx_cpufreq_enable_dvfs(nb_pm_base);
+
+ pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+
+ return PTR_ERR_OR_ZERO(pdev);
+}
+/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
+late_initcall(armada37xx_cpufreq_driver_init);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index ecc56e26f8f6..3b585e4bfac5 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -108,6 +108,14 @@ static const struct of_device_id blacklist[] __initconst = {
{ .compatible = "marvell,armadaxp", },
+ { .compatible = "mediatek,mt2701", },
+ { .compatible = "mediatek,mt2712", },
+ { .compatible = "mediatek,mt7622", },
+ { .compatible = "mediatek,mt7623", },
+ { .compatible = "mediatek,mt817x", },
+ { .compatible = "mediatek,mt8173", },
+ { .compatible = "mediatek,mt8176", },
+
{ .compatible = "nvidia,tegra124", },
{ .compatible = "st,stih407", },
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 41d148af7748..421f318c0e66 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -601,19 +601,18 @@ static struct cpufreq_governor *find_governor(const char *str_governor)
/**
* cpufreq_parse_governor - parse a governor string
*/
-static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
- struct cpufreq_governor **governor)
+static int cpufreq_parse_governor(char *str_governor,
+ struct cpufreq_policy *policy)
{
- int err = -EINVAL;
-
if (cpufreq_driver->setpolicy) {
if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
- *policy = CPUFREQ_POLICY_PERFORMANCE;
- err = 0;
- } else if (!strncasecmp(str_governor, "powersave",
- CPUFREQ_NAME_LEN)) {
- *policy = CPUFREQ_POLICY_POWERSAVE;
- err = 0;
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+ return 0;
+ }
+
+ if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
+ policy->policy = CPUFREQ_POLICY_POWERSAVE;
+ return 0;
}
} else {
struct cpufreq_governor *t;
@@ -621,26 +620,31 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
mutex_lock(&cpufreq_governor_mutex);
t = find_governor(str_governor);
-
- if (t == NULL) {
+ if (!t) {
int ret;
mutex_unlock(&cpufreq_governor_mutex);
+
ret = request_module("cpufreq_%s", str_governor);
- mutex_lock(&cpufreq_governor_mutex);
+ if (ret)
+ return -EINVAL;
- if (ret == 0)
- t = find_governor(str_governor);
- }
+ mutex_lock(&cpufreq_governor_mutex);
- if (t != NULL) {
- *governor = t;
- err = 0;
+ t = find_governor(str_governor);
}
+ if (t && !try_module_get(t->owner))
+ t = NULL;
mutex_unlock(&cpufreq_governor_mutex);
+
+ if (t) {
+ policy->governor = t;
+ return 0;
+ }
}
- return err;
+
+ return -EINVAL;
}
/**
@@ -760,11 +764,14 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
if (ret != 1)
return -EINVAL;
- if (cpufreq_parse_governor(str_governor, &new_policy.policy,
- &new_policy.governor))
+ if (cpufreq_parse_governor(str_governor, &new_policy))
return -EINVAL;
ret = cpufreq_set_policy(policy, &new_policy);
+
+ if (new_policy.governor)
+ module_put(new_policy.governor->owner);
+
return ret ? ret : count;
}
@@ -1044,8 +1051,7 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy)
if (policy->last_policy)
new_policy.policy = policy->last_policy;
else
- cpufreq_parse_governor(gov->name, &new_policy.policy,
- NULL);
+ cpufreq_parse_governor(gov->name, &new_policy);
}
/* set default policy */
return cpufreq_set_policy(policy, &new_policy);
@@ -2160,7 +2166,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
mutex_lock(&cpufreq_governor_mutex);
list_del(&governor->governor_list);
mutex_unlock(&cpufreq_governor_mutex);
- return;
}
EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index c46a12df40dd..5faa37c5b091 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
longhaul_setup_voltagescaling();
- policy->cpuinfo.transition_latency = 200000; /* nsec */
+ policy->transition_delay_us = 200000; /* usec */
return cpufreq_table_validate_and_show(policy, longhaul_table);
}
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index e0d5090b303d..b783919f063d 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -574,6 +574,7 @@ static struct platform_driver mtk_cpufreq_platdrv = {
/* List of machines supported by this driver */
static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
{ .compatible = "mediatek,mt2701", },
+ { .compatible = "mediatek,mt2712", },
{ .compatible = "mediatek,mt7622", },
{ .compatible = "mediatek,mt7623", },
{ .compatible = "mediatek,mt817x", },
diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c
index ed915ee85dd9..31513bd42705 100644
--- a/drivers/cpufreq/mvebu-cpufreq.c
+++ b/drivers/cpufreq/mvebu-cpufreq.c
@@ -76,12 +76,6 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
return PTR_ERR(clk);
}
- /*
- * In case of a failure of dev_pm_opp_add(), we don't
- * bother with cleaning up the registered OPP (there's
- * no function to do so), and simply cancel the
- * registration of the cpufreq device.
- */
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
if (ret) {
clk_put(clk);
@@ -91,7 +85,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
if (ret) {
clk_put(clk);
- return ret;
+ dev_err(cpu_dev, "Failed to register OPPs\n");
+ goto opp_register_failed;
}
ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
@@ -99,9 +94,16 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
if (ret)
dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
__func__, ret);
+ clk_put(clk);
}
platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
return 0;
+
+opp_register_failed:
+ /* As registering has failed remove all the opp for all cpus */
+ dev_pm_opp_cpumask_remove_table(cpu_possible_mask);
+
+ return ret;
}
device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 923317f03b4b..a099b7bf74cd 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -17,6 +17,7 @@
#include <linux/cpu.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -50,6 +51,7 @@ struct ti_cpufreq_soc_data {
unsigned long efuse_mask;
unsigned long efuse_shift;
unsigned long rev_offset;
+ bool multi_regulator;
};
struct ti_cpufreq_data {
@@ -57,6 +59,7 @@ struct ti_cpufreq_data {
struct device_node *opp_node;
struct regmap *syscon;
const struct ti_cpufreq_soc_data *soc_data;
+ struct opp_table *opp_table;
};
static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data,
@@ -95,6 +98,7 @@ static struct ti_cpufreq_soc_data am3x_soc_data = {
.efuse_offset = 0x07fc,
.efuse_mask = 0x1fff,
.rev_offset = 0x600,
+ .multi_regulator = false,
};
static struct ti_cpufreq_soc_data am4x_soc_data = {
@@ -103,6 +107,7 @@ static struct ti_cpufreq_soc_data am4x_soc_data = {
.efuse_offset = 0x0610,
.efuse_mask = 0x3f,
.rev_offset = 0x600,
+ .multi_regulator = false,
};
static struct ti_cpufreq_soc_data dra7_soc_data = {
@@ -111,6 +116,7 @@ static struct ti_cpufreq_soc_data dra7_soc_data = {
.efuse_mask = 0xf80000,
.efuse_shift = 19,
.rev_offset = 0x204,
+ .multi_regulator = true,
};
/**
@@ -195,12 +201,14 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
{},
};
-static int ti_cpufreq_init(void)
+static int ti_cpufreq_probe(struct platform_device *pdev)
{
u32 version[VERSION_COUNT];
struct device_node *np;
const struct of_device_id *match;
+ struct opp_table *ti_opp_table;
struct ti_cpufreq_data *opp_data;
+ const char * const reg_names[] = {"vdd", "vbb"};
int ret;
np = of_find_node_by_path("/");
@@ -247,16 +255,29 @@ static int ti_cpufreq_init(void)
if (ret)
goto fail_put_node;
- ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
- version, VERSION_COUNT));
- if (ret) {
+ ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
+ version, VERSION_COUNT);
+ if (IS_ERR(ti_opp_table)) {
dev_err(opp_data->cpu_dev,
"Failed to set supported hardware\n");
+ ret = PTR_ERR(ti_opp_table);
goto fail_put_node;
}
- of_node_put(opp_data->opp_node);
+ opp_data->opp_table = ti_opp_table;
+
+ if (opp_data->soc_data->multi_regulator) {
+ ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
+ reg_names,
+ ARRAY_SIZE(reg_names));
+ if (IS_ERR(ti_opp_table)) {
+ dev_pm_opp_put_supported_hw(opp_data->opp_table);
+ ret = PTR_ERR(ti_opp_table);
+ goto fail_put_node;
+ }
+ }
+ of_node_put(opp_data->opp_node);
register_cpufreq_dt:
platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
@@ -269,4 +290,22 @@ free_opp_data:
return ret;
}
-device_initcall(ti_cpufreq_init);
+
+static int ti_cpufreq_init(void)
+{
+ platform_device_register_simple("ti-cpufreq", -1, NULL, 0);
+ return 0;
+}
+module_init(ti_cpufreq_init);
+
+static struct platform_driver ti_cpufreq_driver = {
+ .probe = ti_cpufreq_probe,
+ .driver = {
+ .name = "ti-cpufreq",
+ },
+};
+module_platform_driver(ti_cpufreq_driver);
+
+MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver");
+MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
+MODULE_LICENSE("GPL v2");