summaryrefslogtreecommitdiff
path: root/drivers/dma
diff options
context:
space:
mode:
authorSamuel Holland <samuel@sholland.org>2022-06-21 06:13:50 +0300
committerVinod Koul <vkoul@kernel.org>2022-07-05 16:04:26 +0300
commita94a098a21c678c07c8a742e4a65e8aa2bebdf08 (patch)
treeb20698645fb1366a620bf7324775567b088d668f /drivers/dma
parent9bef4929fa21477d44b4934d02296c4d0126dd40 (diff)
downloadlinux-a94a098a21c678c07c8a742e4a65e8aa2bebdf08.tar.xz
dmaengine: sun4i: Set the maximum segment size
The sun4i DMA engine supports transfer sizes up to 128k for normal DMA and 16M for dedicated DMA, as documented in the A10 and A20 manuals. Since this is larger than the default segment size limit (64k), exposing the real limit reduces the number of transfers needed for a transaction. However, because the device can only report one segment size limit, we have to expose the smaller limit from normal DMA. One complication is that the driver combines pairs of periodic transfers to reduce programming overhead. This only works when the period size is at most half of the maximum transfer size. With the default 64k segment size limit, this was always the case, but for normal DMA it is no longer guaranteed. Skip the optimization if the period is too long; even without it, the overhead is less than before. Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220621031350.36187-1-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/dma')
-rw-r--r--drivers/dma/sun4i-dma.c32
1 files changed, 27 insertions, 5 deletions
diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index 93f1645ae928..f291b1b4db32 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -7,6 +7,7 @@
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/clk.h>
+#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/dmapool.h>
#include <linux/interrupt.h>
@@ -122,6 +123,15 @@
SUN4I_DDMA_PARA_DST_WAIT_CYCLES(2) | \
SUN4I_DDMA_PARA_SRC_WAIT_CYCLES(2))
+/*
+ * Normal DMA supports individual transfers (segments) up to 128k.
+ * Dedicated DMA supports transfers up to 16M. We can only report
+ * one size limit, so we have to use the smaller value.
+ */
+#define SUN4I_NDMA_MAX_SEG_SIZE SZ_128K
+#define SUN4I_DDMA_MAX_SEG_SIZE SZ_16M
+#define SUN4I_DMA_MAX_SEG_SIZE SUN4I_NDMA_MAX_SEG_SIZE
+
struct sun4i_dma_pchan {
/* Register base of channel */
void __iomem *base;
@@ -155,7 +165,8 @@ struct sun4i_dma_contract {
struct virt_dma_desc vd;
struct list_head demands;
struct list_head completed_demands;
- int is_cyclic;
+ bool is_cyclic : 1;
+ bool use_half_int : 1;
};
struct sun4i_dma_dev {
@@ -372,7 +383,7 @@ static int __execute_vchan_pending(struct sun4i_dma_dev *priv,
if (promise) {
vchan->contract = contract;
vchan->pchan = pchan;
- set_pchan_interrupt(priv, pchan, contract->is_cyclic, 1);
+ set_pchan_interrupt(priv, pchan, contract->use_half_int, 1);
configure_pchan(pchan, promise);
}
@@ -735,12 +746,21 @@ sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len,
*
* Which requires half the engine programming for the same
* functionality.
+ *
+ * This only works if two periods fit in a single promise. That will
+ * always be the case for dedicated DMA, where the hardware has a much
+ * larger maximum transfer size than advertised to clients.
*/
- nr_periods = DIV_ROUND_UP(len / period_len, 2);
+ if (vchan->is_dedicated || period_len <= SUN4I_NDMA_MAX_SEG_SIZE / 2) {
+ period_len *= 2;
+ contract->use_half_int = 1;
+ }
+
+ nr_periods = DIV_ROUND_UP(len, period_len);
for (i = 0; i < nr_periods; i++) {
/* Calculate the offset in the buffer and the length needed */
- offset = i * period_len * 2;
- plength = min((len - offset), (period_len * 2));
+ offset = i * period_len;
+ plength = min((len - offset), period_len);
if (dir == DMA_MEM_TO_DEV)
src = buf + offset;
else
@@ -1149,6 +1169,8 @@ static int sun4i_dma_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
spin_lock_init(&priv->lock);
+ dma_set_max_seg_size(&pdev->dev, SUN4I_DMA_MAX_SEG_SIZE);
+
dma_cap_zero(priv->slave.cap_mask);
dma_cap_set(DMA_PRIVATE, priv->slave.cap_mask);
dma_cap_set(DMA_MEMCPY, priv->slave.cap_mask);