Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A number of fixes have accumulated, but they are largely for harmless
  issues:

   - Several OF node leak fixes

   - A fix to the Exynos7885 UART clock description

   - DTS fixes to prevent boot failures on TI AM64 and J721s2

   - Bus probe error handling fixes for Baikal-T1

   - A fixup to the way STM32 SoCs use separate dts files for different
     firmware stacks

   - Multiple code fixes for Arm SCMI firmware, all dealing with
     robustness of the implementation

   - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
     nodes

   - Three updates to the MAINTAINERS file, including Florian Fainelli
     taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
     Julienne"

* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
  arm: mach-spear: Add missing of_node_put() in time.c
  ARM: cns3xxx: Fix refcount leak in cns3xxx_init
  MAINTAINERS: Update email address
  arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
  arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
  ARM: dts: bcm2711-rpi-400: Fix GPIO line names
  bus: bt1-axi: Don't print error on -EPROBE_DEFER
  bus: bt1-apb: Don't print error on -EPROBE_DEFER
  ARM: Fix refcount leak in axxia_boot_secondary
  ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
  ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
  ARM: dts: imx6qdl: correct PU regulator ramp delay
  firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
  firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
  firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
  ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
  soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
  MAINTAINERS: Update BCM2711/BCM2835 maintainer
  ...

8 files changed, 80 insertions, 46 deletions

diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c
index 20fba7370f4e..a52f084a6a87 100644
--- a/drivers/firmware/arm_scmi/base.c
+++ b/drivers/firmware/arm_scmi/base.c
@@ -36,7 +36,7 @@ struct scmi_msg_resp_base_attributes {
 
 struct scmi_msg_resp_base_discover_agent {
 	__le32 agent_id;
-	u8 name[SCMI_MAX_STR_SIZE];
+	u8 name[SCMI_SHORT_NAME_MAX_SIZE];
 };
 
 
@@ -119,7 +119,7 @@ scmi_base_vendor_id_get(const struct scmi_protocol_handle *ph, bool sub_vendor)
 
 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret)
-		memcpy(vendor_id, t->rx.buf, size);
+		strscpy(vendor_id, t->rx.buf, size);
 
 	ph->xops->xfer_put(ph, t);
 
@@ -221,11 +221,17 @@ scmi_base_implementation_list_get(const struct scmi_protocol_handle *ph,
 		calc_list_sz = (1 + (loop_num_ret - 1) / sizeof(u32)) *
 				sizeof(u32);
 		if (calc_list_sz != real_list_sz) {
-			dev_err(dev,
-				"Malformed reply - real_sz:%zd  calc_sz:%u\n",
-				real_list_sz, calc_list_sz);
-			ret = -EPROTO;
-			break;
+			dev_warn(dev,
+				 "Malformed reply - real_sz:%zd  calc_sz:%u  (loop_num_ret:%d)\n",
+				 real_list_sz, calc_list_sz, loop_num_ret);
+			/*
+			 * Bail out if the expected list size is bigger than the
+			 * total payload size of the received reply.
+			 */
+			if (calc_list_sz > real_list_sz) {
+				ret = -EPROTO;
+				break;
+			}
 		}
 
 		for (loop = 0; loop < loop_num_ret; loop++)
@@ -270,7 +276,7 @@ static int scmi_base_discover_agent_get(const struct scmi_protocol_handle *ph,
 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret) {
 		agent_info = t->rx.buf;
-		strlcpy(name, agent_info->name, SCMI_MAX_STR_SIZE);
+		strscpy(name, agent_info->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}
 
 	ph->xops->xfer_put(ph, t);
@@ -369,7 +375,7 @@ static int scmi_base_protocol_init(const struct scmi_protocol_handle *ph)
 	int id, ret;
 	u8 *prot_imp;
 	u32 version;
-	char name[SCMI_MAX_STR_SIZE];
+	char name[SCMI_SHORT_NAME_MAX_SIZE];
 	struct device *dev = ph->dev;
 	struct scmi_revision_info *rev = scmi_revision_area_get(ph);
 
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index 4d36a9a133d1..c7a83f6e38e5 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -153,7 +153,7 @@ static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph,
 	if (!ret) {
 		u32 latency = 0;
 		attributes = le32_to_cpu(attr->attributes);
-		strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(clk->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 		/* clock_enable_latency field is present only since SCMI v3.1 */
 		if (PROTOCOL_REV_MAJOR(version) >= 0x2)
 			latency = le32_to_cpu(attr->clock_enable_latency);
@@ -266,9 +266,7 @@ scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id,
 			      struct scmi_clock_info *clk)
 {
 	int ret;
-
 	void *iter;
-	struct scmi_msg_clock_describe_rates *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_clk_describe_prepare_message,
 		.update_state = iter_clk_describe_update_state,
@@ -281,7 +279,8 @@ scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id,
 
 	iter = ph->hops->iter_response_init(ph, &ops, SCMI_MAX_NUM_RATES,
 					    CLOCK_DESCRIBE_RATES,
-					    sizeof(*msg), &cpriv);
+					    sizeof(struct scmi_msg_clock_describe_rates),
+					    &cpriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 8f4051aca220..bbb0331801ff 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -252,7 +252,7 @@ scmi_perf_domain_attributes_get(const struct scmi_protocol_handle *ph,
 			dom_info->mult_factor =
 					(dom_info->sustained_freq_khz * 1000) /
 					dom_info->sustained_perf_level;
-		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}
 
 	ph->xops->xfer_put(ph, t);
@@ -332,7 +332,6 @@ scmi_perf_describe_levels_get(const struct scmi_protocol_handle *ph, u32 domain,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_perf_describe_levels *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_perf_levels_prepare_message,
 		.update_state = iter_perf_levels_update_state,
@@ -345,7 +344,8 @@ scmi_perf_describe_levels_get(const struct scmi_protocol_handle *ph, u32 domain,
 
 	iter = ph->hops->iter_response_init(ph, &ops, MAX_OPPS,
 					    PERF_DESCRIBE_LEVELS,
-					    sizeof(*msg), &ppriv);
+					    sizeof(struct scmi_msg_perf_describe_levels),
+					    &ppriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
index 964882cc8747..356e83631664 100644
--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@@ -122,7 +122,7 @@ scmi_power_domain_attributes_get(const struct scmi_protocol_handle *ph,
 		dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
 		dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
 		dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
-		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}
 	ph->xops->xfer_put(ph, t);
 
diff --git a/drivers/firmware/arm_scmi/protocols.h b/drivers/firmware/arm_scmi/protocols.h
index 73304af5ec4a..c679f3fb8718 100644
--- a/drivers/firmware/arm_scmi/protocols.h
+++ b/drivers/firmware/arm_scmi/protocols.h
@@ -24,8 +24,6 @@
 
 #include <asm/unaligned.h>
 
-#define SCMI_SHORT_NAME_MAX_SIZE	16
-
 #define PROTOCOL_REV_MINOR_MASK	GENMASK(15, 0)
 #define PROTOCOL_REV_MAJOR_MASK	GENMASK(31, 16)
 #define PROTOCOL_REV_MAJOR(x)	((u16)(FIELD_GET(PROTOCOL_REV_MAJOR_MASK, (x))))
diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c
index a420a9102094..673f3eb498f4 100644
--- a/drivers/firmware/arm_scmi/reset.c
+++ b/drivers/firmware/arm_scmi/reset.c
@@ -116,7 +116,7 @@ scmi_reset_domain_attributes_get(const struct scmi_protocol_handle *ph,
 		dom_info->latency_us = le32_to_cpu(attr->latency);
 		if (dom_info->latency_us == U32_MAX)
 			dom_info->latency_us = 0;
-		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}
 
 	ph->xops->xfer_put(ph, t);
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 21e0ce89b153..7288c6117838 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -338,7 +338,6 @@ static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,
 					struct scmi_sensor_info *s)
 {
 	void *iter;
-	struct scmi_msg_sensor_list_update_intervals *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_intervals_prepare_message,
 		.update_state = iter_intervals_update_state,
@@ -351,22 +350,28 @@ static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,
 
 	iter = ph->hops->iter_response_init(ph, &ops, s->intervals.count,
 					    SENSOR_LIST_UPDATE_INTERVALS,
-					    sizeof(*msg), &upriv);
+					    sizeof(struct scmi_msg_sensor_list_update_intervals),
+					    &upriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
 	return ph->hops->iter_response_run(iter);
 }
 
+struct scmi_apriv {
+	bool any_axes_support_extended_names;
+	struct scmi_sensor_info *s;
+};
+
 static void iter_axes_desc_prepare_message(void *message,
 					   const unsigned int desc_index,
 					   const void *priv)
 {
 	struct scmi_msg_sensor_axis_description_get *msg = message;
-	const struct scmi_sensor_info *s = priv;
+	const struct scmi_apriv *apriv = priv;
 
 	/* Set the number of sensors to be skipped/already read */
-	msg->id = cpu_to_le32(s->id);
+	msg->id = cpu_to_le32(apriv->s->id);
 	msg->axis_desc_index = cpu_to_le32(desc_index);
 }
 
@@ -393,19 +398,21 @@ iter_axes_desc_process_response(const struct scmi_protocol_handle *ph,
 	u32 attrh, attrl;
 	struct scmi_sensor_axis_info *a;
 	size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ;
-	struct scmi_sensor_info *s = priv;
+	struct scmi_apriv *apriv = priv;
 	const struct scmi_axis_descriptor *adesc = st->priv;
 
 	attrl = le32_to_cpu(adesc->attributes_low);
+	if (SUPPORTS_EXTENDED_AXIS_NAMES(attrl))
+		apriv->any_axes_support_extended_names = true;
 
-	a = &s->axis[st->desc_index + st->loop_idx];
+	a = &apriv->s->axis[st->desc_index + st->loop_idx];
 	a->id = le32_to_cpu(adesc->id);
 	a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl);
 
 	attrh = le32_to_cpu(adesc->attributes_high);
 	a->scale = S32_EXT(SENSOR_SCALE(attrh));
 	a->type = SENSOR_TYPE(attrh);
-	strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
+	strscpy(a->name, adesc->name, SCMI_SHORT_NAME_MAX_SIZE);
 
 	if (a->extended_attrs) {
 		unsigned int ares = le32_to_cpu(adesc->resolution);
@@ -444,10 +451,19 @@ iter_axes_extended_name_process_response(const struct scmi_protocol_handle *ph,
 					 void *priv)
 {
 	struct scmi_sensor_axis_info *a;
-	const struct scmi_sensor_info *s = priv;
+	const struct scmi_apriv *apriv = priv;
 	struct scmi_sensor_axis_name_descriptor *adesc = st->priv;
+	u32 axis_id = le32_to_cpu(adesc->axis_id);
 
-	a = &s->axis[st->desc_index + st->loop_idx];
+	if (axis_id >= st->max_resources)
+		return -EPROTO;
+
+	/*
+	 * Pick the corresponding descriptor based on the axis_id embedded
+	 * in the reply since the list of axes supporting extended names
+	 * can be a subset of all the axes.
+	 */
+	a = &apriv->s->axis[axis_id];
 	strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
 	st->priv = ++adesc;
 
@@ -458,21 +474,36 @@ static int
 scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph,
 				    struct scmi_sensor_info *s)
 {
+	int ret;
 	void *iter;
-	struct scmi_msg_sensor_axis_description_get *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_axes_desc_prepare_message,
 		.update_state = iter_axes_extended_name_update_state,
 		.process_response = iter_axes_extended_name_process_response,
 	};
+	struct scmi_apriv apriv = {
+		.any_axes_support_extended_names = false,
+		.s = s,
+	};
 
 	iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
 					    SENSOR_AXIS_NAME_GET,
-					    sizeof(*msg), s);
+					    sizeof(struct scmi_msg_sensor_axis_description_get),
+					    &apriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
-	return ph->hops->iter_response_run(iter);
+	/*
+	 * Do not cause whole protocol initialization failure when failing to
+	 * get extended names for axes.
+	 */
+	ret = ph->hops->iter_response_run(iter);
+	if (ret)
+		dev_warn(ph->dev,
+			 "Failed to get axes extended names for %s (ret:%d).\n",
+			 s->name, ret);
+
+	return 0;
 }
 
 static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
@@ -481,12 +512,15 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_sensor_axis_description_get *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_axes_desc_prepare_message,
 		.update_state = iter_axes_desc_update_state,
 		.process_response = iter_axes_desc_process_response,
 	};
+	struct scmi_apriv apriv = {
+		.any_axes_support_extended_names = false,
+		.s = s,
+	};
 
 	s->axis = devm_kcalloc(ph->dev, s->num_axis,
 			       sizeof(*s->axis), GFP_KERNEL);
@@ -495,7 +529,8 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
 
 	iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
 					    SENSOR_AXIS_DESCRIPTION_GET,
-					    sizeof(*msg), s);
+					    sizeof(struct scmi_msg_sensor_axis_description_get),
+					    &apriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
@@ -503,7 +538,8 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
 	if (ret)
 		return ret;
 
-	if (PROTOCOL_REV_MAJOR(version) >= 0x3)
+	if (PROTOCOL_REV_MAJOR(version) >= 0x3 &&
+	    apriv.any_axes_support_extended_names)
 		ret = scmi_sensor_axis_extended_names_get(ph, s);
 
 	return ret;
@@ -598,7 +634,7 @@ iter_sens_descr_process_response(const struct scmi_protocol_handle *ph,
 			    SUPPORTS_AXIS(attrh) ?
 			    SENSOR_AXIS_NUMBER(attrh) : 0,
 			    SCMI_MAX_NUM_SENSOR_AXIS);
-	strscpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE);
+	strscpy(s->name, sdesc->name, SCMI_SHORT_NAME_MAX_SIZE);
 
 	/*
 	 * If supported overwrite short name with the extended
diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c
index 9d195d8719ab..eaa8d944926a 100644
--- a/drivers/firmware/arm_scmi/voltage.c
+++ b/drivers/firmware/arm_scmi/voltage.c
@@ -180,7 +180,6 @@ static int scmi_voltage_levels_get(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_cmd_describe_levels *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_volt_levels_prepare_message,
 		.update_state = iter_volt_levels_update_state,
@@ -193,7 +192,8 @@ static int scmi_voltage_levels_get(const struct scmi_protocol_handle *ph,
 
 	iter = ph->hops->iter_response_init(ph, &ops, v->num_levels,
 					    VOLTAGE_DESCRIBE_LEVELS,
-					    sizeof(*msg), &vpriv);
+					    sizeof(struct scmi_msg_cmd_describe_levels),
+					    &vpriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
@@ -225,15 +225,14 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
 
 		/* Retrieve domain attributes at first ... */
 		put_unaligned_le32(dom, td->tx.buf);
-		ret = ph->xops->do_xfer(ph, td);
 		/* Skip domain on comms error */
-		if (ret)
+		if (ph->xops->do_xfer(ph, td))
 			continue;
 
 		v = vinfo->domains + dom;
 		v->id = dom;
 		attributes = le32_to_cpu(resp_dom->attr);
-		strlcpy(v->name, resp_dom->name, SCMI_MAX_STR_SIZE);
+		strscpy(v->name, resp_dom->name, SCMI_SHORT_NAME_MAX_SIZE);
 
 		/*
 		 * If supported overwrite short name with the extended one;
@@ -249,12 +248,8 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
 				v->async_level_set = true;
 		}
 
-		ret = scmi_voltage_levels_get(ph, v);
 		/* Skip invalid voltage descriptors */
-		if (ret)
-			continue;
-
-		ph->xops->reset_rx_to_maxsz(ph, td);
+		scmi_voltage_levels_get(ph, v);
 	}
 
 	ph->xops->xfer_put(ph, td);