summaryrefslogtreecommitdiff
path: root/drivers/firmware
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-08-02 01:36:01 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-08-02 01:36:01 +0300
commit43a0a98aa8da71583f84b84fd72e265c24d4c5f8 (patch)
tree3830aff2b36f48a67be5f485f00f56cf4269729d /drivers/firmware
parent6911a5281430cf6897376487698504620f454791 (diff)
parentf8c6d88b2c874295f49b9ad1ca0826b9a8ef3180 (diff)
downloadlinux-43a0a98aa8da71583f84b84fd72e265c24d4c5f8.tar.xz
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
Diffstat (limited to 'drivers/firmware')
-rw-r--r--drivers/firmware/Kconfig12
-rw-r--r--drivers/firmware/Makefile1
-rw-r--r--drivers/firmware/arm_scpi.c42
-rw-r--r--drivers/firmware/qcom_scm-32.c327
-rw-r--r--drivers/firmware/qcom_scm-64.c307
-rw-r--r--drivers/firmware/qcom_scm.c353
-rw-r--r--drivers/firmware/qcom_scm.h47
-rw-r--r--drivers/firmware/scpi_pm_domain.c163
8 files changed, 1090 insertions, 162 deletions
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6664f1108c7c..0e22f241403b 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -10,7 +10,7 @@ config ARM_PSCI_FW
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
- depends on ARM_MHU
+ depends on MAILBOX
help
System Control and Power Interface (SCPI) Message Protocol is
defined for the purpose of communication between the Application
@@ -27,6 +27,15 @@ config ARM_SCPI_PROTOCOL
This protocol library provides interface for all the client drivers
making use of the features offered by the SCP.
+config ARM_SCPI_POWER_DOMAIN
+ tristate "SCPI power domain driver"
+ depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
+ default y
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the SCPI power domains which can be
+ enabled or disabled via the SCP firmware
+
config EDD
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
depends on X86
@@ -184,6 +193,7 @@ config FW_CFG_SYSFS_CMDLINE
config QCOM_SCM
bool
depends on ARM || ARM64
+ select RESET_CONTROLLER
config QCOM_SCM_32
def_bool y
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 474bada56fcd..44a59dcfc398 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_ARM_PSCI_FW) += psci.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
+obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_DMI) += dmi_scan.o
obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o
obj-$(CONFIG_EDD) += edd.o
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 7e3e595c9f30..438893762076 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -210,10 +210,6 @@ struct dvfs_info {
} opps[MAX_DVFS_OPPS];
} __packed;
-struct dvfs_get {
- u8 index;
-} __packed;
-
struct dvfs_set {
u8 domain;
u8 index;
@@ -235,6 +231,11 @@ struct sensor_value {
__le32 hi_val;
} __packed;
+struct dev_pstate_set {
+ u16 dev_id;
+ u8 pstate;
+} __packed;
+
static struct scpi_drvinfo *scpi_info;
static int scpi_linux_errmap[SCPI_ERR_MAX] = {
@@ -431,11 +432,11 @@ static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
static int scpi_dvfs_get_idx(u8 domain)
{
int ret;
- struct dvfs_get dvfs;
+ u8 dvfs_idx;
ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain),
- &dvfs, sizeof(dvfs));
- return ret ? ret : dvfs.index;
+ &dvfs_idx, sizeof(dvfs_idx));
+ return ret ? ret : dvfs_idx;
}
static int scpi_dvfs_set_idx(u8 domain, u8 index)
@@ -526,7 +527,7 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
return ret;
}
-int scpi_sensor_get_value(u16 sensor, u64 *val)
+static int scpi_sensor_get_value(u16 sensor, u64 *val)
{
__le16 id = cpu_to_le16(sensor);
struct sensor_value buf;
@@ -541,6 +542,29 @@ int scpi_sensor_get_value(u16 sensor, u64 *val)
return ret;
}
+static int scpi_device_get_power_state(u16 dev_id)
+{
+ int ret;
+ u8 pstate;
+ __le16 id = cpu_to_le16(dev_id);
+
+ ret = scpi_send_message(SCPI_CMD_GET_DEVICE_PWR_STATE, &id,
+ sizeof(id), &pstate, sizeof(pstate));
+ return ret ? ret : pstate;
+}
+
+static int scpi_device_set_power_state(u16 dev_id, u8 pstate)
+{
+ int stat;
+ struct dev_pstate_set dev_set = {
+ .dev_id = cpu_to_le16(dev_id),
+ .pstate = pstate,
+ };
+
+ return scpi_send_message(SCPI_CMD_SET_DEVICE_PWR_STATE, &dev_set,
+ sizeof(dev_set), &stat, sizeof(stat));
+}
+
static struct scpi_ops scpi_ops = {
.get_version = scpi_get_version,
.clk_get_range = scpi_clk_get_range,
@@ -552,6 +576,8 @@ static struct scpi_ops scpi_ops = {
.sensor_get_capability = scpi_sensor_get_capability,
.sensor_get_info = scpi_sensor_get_info,
.sensor_get_value = scpi_sensor_get_value,
+ .device_get_power_state = scpi_device_get_power_state,
+ .device_set_power_state = scpi_device_set_power_state,
};
struct scpi_ops *get_scpi_ops(void)
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 0883292f640f..c6aeedbdcbb0 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -23,8 +23,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/qcom_scm.h>
-
-#include <asm/cacheflush.h>
+#include <linux/dma-mapping.h>
#include "qcom_scm.h"
@@ -97,44 +96,6 @@ struct qcom_scm_response {
};
/**
- * alloc_qcom_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
- */
-static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct qcom_scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
- resp_size;
- u32 offset;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = cpu_to_le32(len);
- offset = offsetof(struct qcom_scm_command, buf);
- cmd->buf_offset = cpu_to_le32(offset);
- cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
- }
- return cmd;
-}
-
-/**
- * free_qcom_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
* qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
* @cmd: command
*
@@ -168,23 +129,6 @@ static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response
return (void *)rsp + le32_to_cpu(rsp->buf_offset);
}
-static int qcom_scm_remap_error(int err)
-{
- pr_err("qcom_scm_call failed with error code %d\n", err);
- switch (err) {
- case QCOM_SCM_ERROR:
- return -EIO;
- case QCOM_SCM_EINVAL_ADDR:
- case QCOM_SCM_EINVAL_ARG:
- return -EINVAL;
- case QCOM_SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case QCOM_SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
static u32 smc(u32 cmd_addr)
{
int context_id;
@@ -209,45 +153,9 @@ static u32 smc(u32 cmd_addr)
return r0;
}
-static int __qcom_scm_call(const struct qcom_scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the command buffer so that the secure world sees
- * the correct data.
- */
- secure_flush_area(cmd, cmd->len);
-
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = qcom_scm_remap_error(ret);
-
- return ret;
-}
-
-static void qcom_scm_inv_range(unsigned long start, unsigned long end)
-{
- u32 cacheline_size, ctr;
-
- asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
- cacheline_size = 4 << ((ctr >> 16) & 0xf);
-
- start = round_down(start, cacheline_size);
- end = round_up(end, cacheline_size);
- outer_inv_range(start, end);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += cacheline_size;
- }
- dsb();
- isb();
-}
-
/**
* qcom_scm_call() - Send an SCM command
+ * @dev: struct device
* @svc_id: service identifier
* @cmd_id: command identifier
* @cmd_buf: command buffer
@@ -264,42 +172,59 @@ static void qcom_scm_inv_range(unsigned long start, unsigned long end)
* and response buffers is taken care of by qcom_scm_call; however, callers are
* responsible for any other cached buffers passed over to the secure world.
*/
-static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
- size_t cmd_len, void *resp_buf, size_t resp_len)
+static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
+ const void *cmd_buf, size_t cmd_len, void *resp_buf,
+ size_t resp_len)
{
int ret;
struct qcom_scm_command *cmd;
struct qcom_scm_response *rsp;
- unsigned long start, end;
+ size_t alloc_len = sizeof(*cmd) + cmd_len + sizeof(*rsp) + resp_len;
+ dma_addr_t cmd_phys;
- cmd = alloc_qcom_scm_command(cmd_len, resp_len);
+ cmd = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
+ cmd->len = cpu_to_le32(alloc_len);
+ cmd->buf_offset = cpu_to_le32(sizeof(*cmd));
+ cmd->resp_hdr_offset = cpu_to_le32(sizeof(*cmd) + cmd_len);
+
cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
if (cmd_buf)
memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+ rsp = qcom_scm_command_to_response(cmd);
+
+ cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, cmd_phys)) {
+ kfree(cmd);
+ return -ENOMEM;
+ }
+
mutex_lock(&qcom_scm_lock);
- ret = __qcom_scm_call(cmd);
+ ret = smc(cmd_phys);
+ if (ret < 0)
+ ret = qcom_scm_remap_error(ret);
mutex_unlock(&qcom_scm_lock);
if (ret)
goto out;
- rsp = qcom_scm_command_to_response(cmd);
- start = (unsigned long)rsp;
-
do {
- qcom_scm_inv_range(start, start + sizeof(*rsp));
+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len,
+ sizeof(*rsp), DMA_FROM_DEVICE);
} while (!rsp->is_complete);
- end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
- qcom_scm_inv_range(start, end);
-
- if (resp_buf)
- memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
+ if (resp_buf) {
+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len +
+ le32_to_cpu(rsp->buf_offset),
+ resp_len, DMA_FROM_DEVICE);
+ memcpy(resp_buf, qcom_scm_get_response_buffer(rsp),
+ resp_len);
+ }
out:
- free_qcom_scm_command(cmd);
+ dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE);
+ kfree(cmd);
return ret;
}
@@ -342,6 +267,41 @@ static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
return r0;
}
+/**
+ * qcom_scm_call_atomic2() - Send an atomic SCM command with two arguments
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @arg1: first argument
+ * @arg2: second argument
+ *
+ * This shall only be used with commands that are guaranteed to be
+ * uninterruptable, atomic and SMP safe.
+ */
+static s32 qcom_scm_call_atomic2(u32 svc, u32 cmd, u32 arg1, u32 arg2)
+{
+ int context_id;
+
+ register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 2);
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = arg1;
+ register u32 r3 asm("r3") = arg2;
+
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+ __asmeq("%4", "r3")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2), "r" (r3)
+ );
+ return r0;
+}
+
u32 qcom_scm_get_version(void)
{
int context_id;
@@ -378,22 +338,6 @@ u32 qcom_scm_get_version(void)
}
EXPORT_SYMBOL(qcom_scm_get_version);
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-static int qcom_scm_set_boot_addr(u32 addr, int flags)
-{
- struct {
- __le32 flags;
- __le32 addr;
- } cmd;
-
- cmd.addr = cpu_to_le32(addr);
- cmd.flags = cpu_to_le32(flags);
- return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
-
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
@@ -423,7 +367,8 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
set_cpu_present(cpu, false);
}
- return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ flags, virt_to_phys(entry));
}
/**
@@ -434,11 +379,16 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
-int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+ const cpumask_t *cpus)
{
int ret;
int flags = 0;
int cpu;
+ struct {
+ __le32 flags;
+ __le32 addr;
+ } cmd;
/*
* Reassign only if we are switching from hotplug entry point
@@ -454,7 +404,10 @@ int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
if (!flags)
return 0;
- ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ cmd.addr = cpu_to_le32(virt_to_phys(entry));
+ cmd.flags = cpu_to_le32(flags);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
if (!ret) {
for_each_cpu(cpu, cpus)
qcom_scm_wb[cpu].entry = entry;
@@ -477,25 +430,133 @@ void __qcom_scm_cpu_power_down(u32 flags)
flags & QCOM_SCM_FLUSH_FLAG_MASK);
}
-int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
int ret;
__le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id);
__le32 ret_val = 0;
- ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
- sizeof(svc_cmd), &ret_val, sizeof(ret_val));
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ &svc_cmd, sizeof(svc_cmd), &ret_val,
+ sizeof(ret_val));
if (ret)
return ret;
return le32_to_cpu(ret_val);
}
-int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
+ u32 req_cnt, u32 *resp)
{
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
return -ERANGE;
- return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}
+
+void __qcom_scm_init(void)
+{
+}
+
+bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? false : !!out;
+}
+
+int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+ dma_addr_t metadata_phys)
+{
+ __le32 scm_ret;
+ int ret;
+ struct {
+ __le32 proc;
+ __le32 image_addr;
+ } request;
+
+ request.proc = cpu_to_le32(peripheral);
+ request.image_addr = cpu_to_le32(metadata_phys);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ &request, sizeof(request),
+ &scm_ret, sizeof(scm_ret));
+
+ return ret ? : le32_to_cpu(scm_ret);
+}
+
+int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+ phys_addr_t addr, phys_addr_t size)
+{
+ __le32 scm_ret;
+ int ret;
+ struct {
+ __le32 proc;
+ __le32 addr;
+ __le32 len;
+ } request;
+
+ request.proc = cpu_to_le32(peripheral);
+ request.addr = cpu_to_le32(addr);
+ request.len = cpu_to_le32(size);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_MEM_SETUP_CMD,
+ &request, sizeof(request),
+ &scm_ret, sizeof(scm_ret));
+
+ return ret ? : le32_to_cpu(scm_ret);
+}
+
+int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
+
+int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
+{
+ __le32 out;
+ __le32 in;
+ int ret;
+
+ in = cpu_to_le32(peripheral);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_SHUTDOWN_CMD,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
+
+int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+ __le32 out;
+ __le32 in = cpu_to_le32(reset);
+ int ret;
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET,
+ &in, sizeof(in),
+ &out, sizeof(out));
+
+ return ret ? : le32_to_cpu(out);
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index bb6555f6d63b..4a0f5ead4fb5 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -12,7 +12,150 @@
#include <linux/io.h>
#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
#include <linux/qcom_scm.h>
+#include <linux/arm-smccc.h>
+#include <linux/dma-mapping.h>
+
+#include "qcom_scm.h"
+
+#define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
+
+#define MAX_QCOM_SCM_ARGS 10
+#define MAX_QCOM_SCM_RETS 3
+
+enum qcom_scm_arg_types {
+ QCOM_SCM_VAL,
+ QCOM_SCM_RO,
+ QCOM_SCM_RW,
+ QCOM_SCM_BUFVAL,
+};
+
+#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
+ (((a) & 0x3) << 4) | \
+ (((b) & 0x3) << 6) | \
+ (((c) & 0x3) << 8) | \
+ (((d) & 0x3) << 10) | \
+ (((e) & 0x3) << 12) | \
+ (((f) & 0x3) << 14) | \
+ (((g) & 0x3) << 16) | \
+ (((h) & 0x3) << 18) | \
+ (((i) & 0x3) << 20) | \
+ (((j) & 0x3) << 22) | \
+ ((num) & 0xf))
+
+#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+
+/**
+ * struct qcom_scm_desc
+ * @arginfo: Metadata describing the arguments in args[]
+ * @args: The array of arguments for the secure syscall
+ * @res: The values returned by the secure syscall
+ */
+struct qcom_scm_desc {
+ u32 arginfo;
+ u64 args[MAX_QCOM_SCM_ARGS];
+};
+
+static u64 qcom_smccc_convention = -1;
+static DEFINE_MUTEX(qcom_scm_lock);
+
+#define QCOM_SCM_EBUSY_WAIT_MS 30
+#define QCOM_SCM_EBUSY_MAX_RETRY 20
+
+#define N_EXT_QCOM_SCM_ARGS 7
+#define FIRST_EXT_ARG_IDX 3
+#define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1)
+
+/**
+ * qcom_scm_call() - Invoke a syscall in the secure world
+ * @dev: device
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @desc: Descriptor structure containing arguments and return values
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ * This should *only* be called in pre-emptible context.
+*/
+static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
+ const struct qcom_scm_desc *desc,
+ struct arm_smccc_res *res)
+{
+ int arglen = desc->arginfo & 0xf;
+ int retry_count = 0, i;
+ u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id);
+ u64 cmd, x5 = desc->args[FIRST_EXT_ARG_IDX];
+ dma_addr_t args_phys = 0;
+ void *args_virt = NULL;
+ size_t alloc_len;
+
+ if (unlikely(arglen > N_REGISTER_ARGS)) {
+ alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
+ args_virt = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
+
+ if (!args_virt)
+ return -ENOMEM;
+
+ if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
+ __le32 *args = args_virt;
+
+ for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+ args[i] = cpu_to_le32(desc->args[i +
+ FIRST_EXT_ARG_IDX]);
+ } else {
+ __le64 *args = args_virt;
+
+ for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+ args[i] = cpu_to_le64(desc->args[i +
+ FIRST_EXT_ARG_IDX]);
+ }
+
+ args_phys = dma_map_single(dev, args_virt, alloc_len,
+ DMA_TO_DEVICE);
+
+ if (dma_mapping_error(dev, args_phys)) {
+ kfree(args_virt);
+ return -ENOMEM;
+ }
+
+ x5 = args_phys;
+ }
+
+ do {
+ mutex_lock(&qcom_scm_lock);
+
+ cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
+ qcom_smccc_convention,
+ ARM_SMCCC_OWNER_SIP, fn_id);
+
+ do {
+ arm_smccc_smc(cmd, desc->arginfo, desc->args[0],
+ desc->args[1], desc->args[2], x5, 0, 0,
+ res);
+ } while (res->a0 == QCOM_SCM_INTERRUPTED);
+
+ mutex_unlock(&qcom_scm_lock);
+
+ if (res->a0 == QCOM_SCM_V2_EBUSY) {
+ if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
+ break;
+ msleep(QCOM_SCM_EBUSY_WAIT_MS);
+ }
+ } while (res->a0 == QCOM_SCM_V2_EBUSY);
+
+ if (args_virt) {
+ dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
+ kfree(args_virt);
+ }
+
+ if (res->a0 < 0)
+ return qcom_scm_remap_error(res->a0);
+
+ return 0;
+}
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
@@ -29,13 +172,15 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
/**
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @dev: Device pointer
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
-int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+ const cpumask_t *cpus)
{
return -ENOTSUPP;
}
@@ -52,12 +197,164 @@ void __qcom_scm_cpu_power_down(u32 flags)
{
}
-int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
- return -ENOTSUPP;
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.arginfo = QCOM_SCM_ARGS(1);
+ desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) |
+ (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
}
-int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
+ u32 req_cnt, u32 *resp)
{
- return -ENOTSUPP;
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ desc.args[0] = req[0].addr;
+ desc.args[1] = req[0].val;
+ desc.args[2] = req[1].addr;
+ desc.args[3] = req[1].val;
+ desc.args[4] = req[2].addr;
+ desc.args[5] = req[2].val;
+ desc.args[6] = req[3].addr;
+ desc.args[7] = req[3].val;
+ desc.args[8] = req[4].addr;
+ desc.args[9] = req[4].val;
+ desc.arginfo = QCOM_SCM_ARGS(10);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
+ &res);
+ *resp = res.a1;
+
+ return ret;
+}
+
+void __qcom_scm_init(void)
+{
+ u64 cmd;
+ struct arm_smccc_res res;
+ u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
+
+ /* First try a SMC64 call */
+ cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
+ ARM_SMCCC_OWNER_SIP, function);
+
+ arm_smccc_smc(cmd, QCOM_SCM_ARGS(1), cmd & (~BIT(ARM_SMCCC_TYPE_SHIFT)),
+ 0, 0, 0, 0, 0, &res);
+
+ if (!res.a0 && res.a1)
+ qcom_smccc_convention = ARM_SMCCC_SMC_64;
+ else
+ qcom_smccc_convention = ARM_SMCCC_SMC_32;
+}
+
+bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ &desc, &res);
+
+ return ret ? false : !!res.a1;
+}
+
+int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+ dma_addr_t metadata_phys)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.args[1] = metadata_phys;
+ desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+ phys_addr_t addr, phys_addr_t size)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.args[1] = addr;
+ desc.args[2] = size;
+ desc.arginfo = QCOM_SCM_ARGS(3);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+
+ desc.args[0] = peripheral;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+ int ret;
+
+ desc.args[0] = reset;
+ desc.args[1] = 0;
+ desc.arginfo = QCOM_SCM_ARGS(2);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
+ &res);
+
+ return ret ? : res.a1;
}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 45c008d68891..e64a501adbf4 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -10,19 +10,64 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
*/
-
+#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/export.h>
+#include <linux/dma-mapping.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/reset-controller.h>
#include "qcom_scm.h"
+struct qcom_scm {
+ struct device *dev;
+ struct clk *core_clk;
+ struct clk *iface_clk;
+ struct clk *bus_clk;
+ struct reset_controller_dev reset;
+};
+
+static struct qcom_scm *__scm;
+
+static int qcom_scm_clk_enable(void)
+{
+ int ret;
+
+ ret = clk_prepare_enable(__scm->core_clk);
+ if (ret)
+ goto bail;
+
+ ret = clk_prepare_enable(__scm->iface_clk);
+ if (ret)
+ goto disable_core;
+
+ ret = clk_prepare_enable(__scm->bus_clk);
+ if (ret)
+ goto disable_iface;
+
+ return 0;
+
+disable_iface:
+ clk_disable_unprepare(__scm->iface_clk);
+disable_core:
+ clk_disable_unprepare(__scm->core_clk);
+bail:
+ return ret;
+}
+
+static void qcom_scm_clk_disable(void)
+{
+ clk_disable_unprepare(__scm->core_clk);
+ clk_disable_unprepare(__scm->iface_clk);
+ clk_disable_unprepare(__scm->bus_clk);
+}
+
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
@@ -47,7 +92,7 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_warm_boot_addr(entry, cpus);
+ return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
@@ -72,12 +117,17 @@ EXPORT_SYMBOL(qcom_scm_cpu_power_down);
*/
bool qcom_scm_hdcp_available(void)
{
- int ret;
+ int ret = qcom_scm_clk_enable();
- ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
- QCOM_SCM_CMD_HDCP);
+ if (ret)
+ return ret;
- return (ret > 0) ? true : false;
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
+ QCOM_SCM_CMD_HDCP);
+
+ qcom_scm_clk_disable();
+
+ return ret > 0 ? true : false;
}
EXPORT_SYMBOL(qcom_scm_hdcp_available);
@@ -91,6 +141,287 @@ EXPORT_SYMBOL(qcom_scm_hdcp_available);
*/
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
- return __qcom_scm_hdcp_req(req, req_cnt, resp);
+ int ret = qcom_scm_clk_enable();
+
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
+ qcom_scm_clk_disable();
+ return ret;
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);
+
+/**
+ * qcom_scm_pas_supported() - Check if the peripheral authentication service is
+ * available for the given peripherial
+ * @peripheral: peripheral id
+ *
+ * Returns true if PAS is supported for this peripheral, otherwise false.
+ */
+bool qcom_scm_pas_supported(u32 peripheral)
+{
+ int ret;
+
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD);
+ if (ret <= 0)
+ return false;
+
+ return __qcom_scm_pas_supported(__scm->dev, peripheral);
+}
+EXPORT_SYMBOL(qcom_scm_pas_supported);
+
+/**
+ * qcom_scm_pas_init_image() - Initialize peripheral authentication service
+ * state machine for a given peripheral, using the
+ * metadata
+ * @peripheral: peripheral id
+ * @metadata: pointer to memory containing ELF header, program header table
+ * and optional blob of data used for authenticating the metadata
+ * and the rest of the firmware
+ * @size: size of the metadata
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
+{
+ dma_addr_t mdata_phys;
+ void *mdata_buf;
+ int ret;
+
+ /*
+ * During the scm call memory protection will be enabled for the meta
+ * data blob, so make sure it's physically contiguous, 4K aligned and
+ * non-cachable to avoid XPU violations.
+ */
+ mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
+ GFP_KERNEL);
+ if (!mdata_buf) {
+ dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
+ return -ENOMEM;
+ }
+ memcpy(mdata_buf, metadata, size);
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ goto free_metadata;
+
+ ret = __qcom_scm_pas_init_image(__scm->dev, peripheral, mdata_phys);
+
+ qcom_scm_clk_disable();
+
+free_metadata:
+ dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_init_image);
+
+/**
+ * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
+ * for firmware loading
+ * @peripheral: peripheral id
+ * @addr: start address of memory area to prepare
+ * @size: size of the memory area to prepare
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_mem_setup(__scm->dev, peripheral, addr, size);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
+
+/**
+ * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
+ * and reset the remote processor
+ * @peripheral: peripheral id
+ *
+ * Return 0 on success.
+ */
+int qcom_scm_pas_auth_and_reset(u32 peripheral)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_auth_and_reset(__scm->dev, peripheral);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
+
+/**
+ * qcom_scm_pas_shutdown() - Shut down the remote processor
+ * @peripheral: peripheral id
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_shutdown(u32 peripheral)
+{
+ int ret;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_pas_shutdown(__scm->dev, peripheral);
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_pas_shutdown);
+
+static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ if (idx != 0)
+ return -EINVAL;
+
+ return __qcom_scm_pas_mss_reset(__scm->dev, 1);
+}
+
+static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ if (idx != 0)
+ return -EINVAL;
+
+ return __qcom_scm_pas_mss_reset(__scm->dev, 0);
+}
+
+static const struct reset_control_ops qcom_scm_pas_reset_ops = {
+ .assert = qcom_scm_pas_reset_assert,
+ .deassert = qcom_scm_pas_reset_deassert,
+};
+
+/**
+ * qcom_scm_is_available() - Checks if SCM is available
+ */
+bool qcom_scm_is_available(void)
+{
+ return !!__scm;
+}
+EXPORT_SYMBOL(qcom_scm_is_available);
+
+static int qcom_scm_probe(struct platform_device *pdev)
+{
+ struct qcom_scm *scm;
+ int ret;
+
+ scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
+ if (!scm)
+ return -ENOMEM;
+
+ scm->core_clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(scm->core_clk)) {
+ if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
+ return PTR_ERR(scm->core_clk);
+
+ scm->core_clk = NULL;
+ }
+
+ if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) {
+ scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(scm->iface_clk)) {
+ if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to acquire iface clk\n");
+ return PTR_ERR(scm->iface_clk);
+ }
+
+ scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(scm->bus_clk)) {
+ if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to acquire bus clk\n");
+ return PTR_ERR(scm->bus_clk);
+ }
+ }
+
+ scm->reset.ops = &qcom_scm_pas_reset_ops;
+ scm->reset.nr_resets = 1;
+ scm->reset.of_node = pdev->dev.of_node;
+ reset_controller_register(&scm->reset);
+
+ /* vote for max clk rate for highest performance */
+ ret = clk_set_rate(scm->core_clk, INT_MAX);
+ if (ret)
+ return ret;
+
+ __scm = scm;
+ __scm->dev = &pdev->dev;
+
+ __qcom_scm_init();
+
+ return 0;
+}
+
+static const struct of_device_id qcom_scm_dt_match[] = {
+ { .compatible = "qcom,scm-apq8064",},
+ { .compatible = "qcom,scm-msm8660",},
+ { .compatible = "qcom,scm-msm8960",},
+ { .compatible = "qcom,scm",},
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
+
+static struct platform_driver qcom_scm_driver = {
+ .driver = {
+ .name = "qcom_scm",
+ .of_match_table = qcom_scm_dt_match,
+ },
+ .probe = qcom_scm_probe,
+};
+
+static int __init qcom_scm_init(void)
+{
+ struct device_node *np, *fw_np;
+ int ret;
+
+ fw_np = of_find_node_by_name(NULL, "firmware");
+
+ if (!fw_np)
+ return -ENODEV;
+
+ np = of_find_matching_node(fw_np, qcom_scm_dt_match);
+
+ if (!np) {
+ of_node_put(fw_np);
+ return -ENODEV;
+ }
+
+ of_node_put(np);
+
+ ret = of_platform_populate(fw_np, qcom_scm_dt_match, NULL, NULL);
+
+ of_node_put(fw_np);
+
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&qcom_scm_driver);
+}
+
+subsys_initcall(qcom_scm_init);
+
+static void __exit qcom_scm_exit(void)
+{
+ platform_driver_unregister(&qcom_scm_driver);
+}
+module_exit(qcom_scm_exit);
+
+MODULE_DESCRIPTION("Qualcomm SCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 2cce75c08b99..3584b00fe7e6 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -19,7 +19,8 @@
#define QCOM_SCM_FLAG_HLOS 0x01
#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
-extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+ const cpumask_t *cpus);
extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
#define QCOM_SCM_CMD_TERMINATE_PC 0x2
@@ -29,14 +30,34 @@ extern void __qcom_scm_cpu_power_down(u32 flags);
#define QCOM_SCM_SVC_INFO 0x6
#define QCOM_IS_CALL_AVAIL_CMD 0x1
-extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
+extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+ u32 cmd_id);
#define QCOM_SCM_SVC_HDCP 0x11
#define QCOM_SCM_CMD_HDCP 0x01
-extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
- u32 *resp);
+extern int __qcom_scm_hdcp_req(struct device *dev,
+ struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
+
+extern void __qcom_scm_init(void);
+
+#define QCOM_SCM_SVC_PIL 0x2
+#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1
+#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2
+#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5
+#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6
+#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
+#define QCOM_SCM_PAS_MSS_RESET 0xa
+extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+ dma_addr_t metadata_phys);
+extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+ phys_addr_t addr, phys_addr_t size);
+extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
/* common error codes */
+#define QCOM_SCM_V2_EBUSY -12
#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
#define QCOM_SCM_EINVAL_ADDR -3
@@ -44,4 +65,22 @@ extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
#define QCOM_SCM_ERROR -1
#define QCOM_SCM_INTERRUPTED 1
+static inline int qcom_scm_remap_error(int err)
+{
+ switch (err) {
+ case QCOM_SCM_ERROR:
+ return -EIO;
+ case QCOM_SCM_EINVAL_ADDR:
+ case QCOM_SCM_EINVAL_ARG:
+ return -EINVAL;
+ case QCOM_SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case QCOM_SCM_ENOMEM:
+ return -ENOMEM;
+ case QCOM_SCM_V2_EBUSY:
+ return -EBUSY;
+ }
+ return -EINVAL;
+}
+
#endif
diff --git a/drivers/firmware/scpi_pm_domain.c b/drivers/firmware/scpi_pm_domain.c
new file mode 100644
index 000000000000..f395dec27113
--- /dev/null
+++ b/drivers/firmware/scpi_pm_domain.c
@@ -0,0 +1,163 @@
+/*
+ * SCPI Generic power domain support.
+ *
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pm_domain.h>
+#include <linux/scpi_protocol.h>
+
+struct scpi_pm_domain {
+ struct generic_pm_domain genpd;
+ struct scpi_ops *ops;
+ u32 domain;
+ char name[30];
+};
+
+/*
+ * These device power state values are not well-defined in the specification.
+ * In case, different implementations use different values, we can make these
+ * specific to compatibles rather than getting these values from device tree.
+ */
+enum scpi_power_domain_state {
+ SCPI_PD_STATE_ON = 0,
+ SCPI_PD_STATE_OFF = 3,
+};
+
+#define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd)
+
+static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on)
+{
+ int ret;
+ enum scpi_power_domain_state state;
+
+ if (power_on)
+ state = SCPI_PD_STATE_ON;
+ else
+ state = SCPI_PD_STATE_OFF;
+
+ ret = pd->ops->device_set_power_state(pd->domain, state);
+ if (ret)
+ return ret;
+
+ return !(state == pd->ops->device_get_power_state(pd->domain));
+}
+
+static int scpi_pd_power_on(struct generic_pm_domain *domain)
+{
+ struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+ return scpi_pd_power(pd, true);
+}
+
+static int scpi_pd_power_off(struct generic_pm_domain *domain)
+{
+ struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+ return scpi_pd_power(pd, false);
+}
+
+static int scpi_pm_domain_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct scpi_pm_domain *scpi_pd;
+ struct genpd_onecell_data *scpi_pd_data;
+ struct generic_pm_domain **domains;
+ struct scpi_ops *scpi_ops;
+ int ret, num_domains, i;
+
+ scpi_ops = get_scpi_ops();
+ if (!scpi_ops)
+ return -EPROBE_DEFER;
+
+ if (!np) {
+ dev_err(dev, "device tree node not found\n");
+ return -ENODEV;
+ }
+
+ if (!scpi_ops->device_set_power_state ||
+ !scpi_ops->device_get_power_state) {
+ dev_err(dev, "power domains not supported in the firmware\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(np, "num-domains", &num_domains);
+ if (ret) {
+ dev_err(dev, "number of domains not found\n");
+ return -EINVAL;
+ }
+
+ scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL);
+ if (!scpi_pd)
+ return -ENOMEM;
+
+ scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL);
+ if (!scpi_pd_data)
+ return -ENOMEM;
+
+ domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL);
+ if (!domains)
+ return -ENOMEM;
+
+ for (i = 0; i < num_domains; i++, scpi_pd++) {
+ domains[i] = &scpi_pd->genpd;
+
+ scpi_pd->domain = i;
+ scpi_pd->ops = scpi_ops;
+ sprintf(scpi_pd->name, "%s.%d", np->name, i);
+ scpi_pd->genpd.name = scpi_pd->name;
+ scpi_pd->genpd.power_off = scpi_pd_power_off;
+ scpi_pd->genpd.power_on = scpi_pd_power_on;
+
+ /*
+ * Treat all power domains as off at boot.
+ *
+ * The SCP firmware itself may have switched on some domains,
+ * but for reference counting purpose, keep it this way.
+ */
+ pm_genpd_init(&scpi_pd->genpd, NULL, true);
+ }
+
+ scpi_pd_data->domains = domains;
+ scpi_pd_data->num_domains = num_domains;
+
+ of_genpd_add_provider_onecell(np, scpi_pd_data);
+
+ return 0;
+}
+
+static const struct of_device_id scpi_power_domain_ids[] = {
+ { .compatible = "arm,scpi-power-domains", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, scpi_power_domain_ids);
+
+static struct platform_driver scpi_power_domain_driver = {
+ .driver = {
+ .name = "scpi_power_domain",
+ .of_match_table = scpi_power_domain_ids,
+ },
+ .probe = scpi_pm_domain_probe,
+};
+module_platform_driver(scpi_power_domain_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI power domain driver");
+MODULE_LICENSE("GPL v2");