summaryrefslogtreecommitdiff
path: root/drivers/firmware
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-14 02:55:21 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-14 02:55:21 +0400
commit8ceafbfa91ffbdbb2afaea5c24ccb519ffb8b587 (patch)
tree98c9ea93362536f1ddd73175b13b7847583350df /drivers/firmware
parent42a2d923cc349583ebf6fdd52a7d35e1c2f7e6bd (diff)
parent26ba47b18318abe7dadbe9294a611c0e932651d8 (diff)
downloadlinux-8ceafbfa91ffbdbb2afaea5c24ccb519ffb8b587.tar.xz
Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
Diffstat (limited to 'drivers/firmware')
-rw-r--r--drivers/firmware/dcdbas.c32
-rw-r--r--drivers/firmware/google/gsmi.c13
2 files changed, 27 insertions, 18 deletions
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index ff080ee20197..1b5e8e46226d 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -545,12 +545,15 @@ static int dcdbas_probe(struct platform_device *dev)
host_control_action = HC_ACTION_NONE;
host_control_smi_type = HC_SMITYPE_NONE;
+ dcdbas_pdev = dev;
+
/*
* BIOS SMI calls require buffer addresses be in 32-bit address space.
* This is done by setting the DMA mask below.
*/
- dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
+ error = dma_set_coherent_mask(&dcdbas_pdev->dev, DMA_BIT_MASK(32));
+ if (error)
+ return error;
error = sysfs_create_group(&dev->dev.kobj, &dcdbas_attr_group);
if (error)
@@ -581,6 +584,14 @@ static struct platform_driver dcdbas_driver = {
.remove = dcdbas_remove,
};
+static const struct platform_device_info dcdbas_dev_info __initdata = {
+ .name = DRIVER_NAME,
+ .id = -1,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
+static struct platform_device *dcdbas_pdev_reg;
+
/**
* dcdbas_init: initialize driver
*/
@@ -592,20 +603,14 @@ static int __init dcdbas_init(void)
if (error)
return error;
- dcdbas_pdev = platform_device_alloc(DRIVER_NAME, -1);
- if (!dcdbas_pdev) {
- error = -ENOMEM;
+ dcdbas_pdev_reg = platform_device_register_full(&dcdbas_dev_info);
+ if (IS_ERR(dcdbas_pdev_reg)) {
+ error = PTR_ERR(dcdbas_pdev_reg);
goto err_unregister_driver;
}
- error = platform_device_add(dcdbas_pdev);
- if (error)
- goto err_free_device;
-
return 0;
- err_free_device:
- platform_device_put(dcdbas_pdev);
err_unregister_driver:
platform_driver_unregister(&dcdbas_driver);
return error;
@@ -628,8 +633,9 @@ static void __exit dcdbas_exit(void)
* all sysfs attributes belonging to this module have been
* released.
*/
- smi_data_buf_free();
- platform_device_unregister(dcdbas_pdev);
+ if (dcdbas_pdev)
+ smi_data_buf_free();
+ platform_device_unregister(dcdbas_pdev_reg);
platform_driver_unregister(&dcdbas_driver);
}
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index 6eb535ffeddc..e5a67b24587a 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -764,6 +764,13 @@ static __init int gsmi_system_valid(void)
static struct kobject *gsmi_kobj;
static struct efivars efivars;
+static const struct platform_device_info gsmi_dev_info = {
+ .name = "gsmi",
+ .id = -1,
+ /* SMI callbacks require 32bit addresses */
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
static __init int gsmi_init(void)
{
unsigned long flags;
@@ -776,7 +783,7 @@ static __init int gsmi_init(void)
gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
/* register device */
- gsmi_dev.pdev = platform_device_register_simple("gsmi", -1, NULL, 0);
+ gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info);
if (IS_ERR(gsmi_dev.pdev)) {
printk(KERN_ERR "gsmi: unable to register platform device\n");
return PTR_ERR(gsmi_dev.pdev);
@@ -785,10 +792,6 @@ static __init int gsmi_init(void)
/* SMI access needs to be serialized */
spin_lock_init(&gsmi_dev.lock);
- /* SMI callbacks require 32bit addresses */
- gsmi_dev.pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- gsmi_dev.pdev->dev.dma_mask =
- &gsmi_dev.pdev->dev.coherent_dma_mask;
ret = -ENOMEM;
gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);