Merge tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We have a new GPIO multiplexer driver, bunch of driver updates and
  refactoring in the core GPIO library.

  GPIO core:
   - teach gpiolib to work with software nodes for HW description
   - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
     the number of GPIOS since the allocation became entirely dynamic
   - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
     controller, Freescale PCIe and Ethernet controller, Himax LCDs and
     Mediatek mt2701
   - refactor OF quirk code
   - some general refactoring of the OF and ACPI code, adding new
     helpers, minor tweaks and fixes, making fwnode usage consistent
     etc.

  GPIO uAPI:
   - fix an issue where the user-space can trigger a NULL-pointer
     dereference in the kernel by opening a device file, forcing a
     driver unbind and then calling one of the syscalls on the
     associated file descriptor

  New drivers:
   - add gpio-latch: a new GPIO multiplexer based on latches connected
     to other GPIOs

  Driver updates:
   - convert i2c GPIO expanders to using .probe_new()
   - drop the gpio-sta2x11 driver
   - factor out common code for the ACCES IDIO-16 family of controllers
     and use this new library wherever applicable in drivers
   - add DT support to gpio-hisi
   - allow building gpio-davinci as a module and increase its maxItems
     property
   - add support for a new model to gpio-pca9570
   - other minor changes to various drivers"

* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
  gpio: sim: set a limit on the number of GPIOs
  gpiolib: protect the GPIO device against being dropped while in use by user-space
  gpiolib: cdev: fix NULL-pointer dereferences
  gpiolib: Provide to_gpio_device() helper
  gpiolib: Unify access to the device properties
  gpio: Do not include <linux/kernel.h> when not really needed.
  gpio: pcf857x: Convert to i2c's .probe_new()
  gpio: pca953x: Convert to i2c's .probe_new()
  gpio: max732x: Convert to i2c's .probe_new()
  dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
  gpiolib: ensure that fwnode is properly set
  gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
  gpiolib: of: Use correct fwnode for DT-probed chips
  gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
  gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
  gpiolib: add support for software nodes
  gpiolib: consolidate GPIO lookups
  gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
  gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
  gpiolib: acpi: change acpi_find_gpio() to accept firmware node
  ...

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-latch.c b/drivers/gpio/gpio-latch.c
new file mode 100644
index 000000000000..d7c3b20c8482
--- /dev/null
+++ b/drivers/gpio/gpio-latch.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO latch driver
+ *
+ *  Copyright (C) 2022 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This driver implements a GPIO (or better GPO as there is no input)
+ * multiplexer based on latches like this:
+ *
+ * CLK0 ----------------------.        ,--------.
+ * CLK1 -------------------.  `--------|>    #0 |
+ *                         |           |        |
+ * OUT0 ----------------+--|-----------|D0    Q0|-----|<
+ * OUT1 --------------+-|--|-----------|D1    Q1|-----|<
+ * OUT2 ------------+-|-|--|-----------|D2    Q2|-----|<
+ * OUT3 ----------+-|-|-|--|-----------|D3    Q3|-----|<
+ * OUT4 --------+-|-|-|-|--|-----------|D4    Q4|-----|<
+ * OUT5 ------+-|-|-|-|-|--|-----------|D5    Q5|-----|<
+ * OUT6 ----+-|-|-|-|-|-|--|-----------|D6    Q6|-----|<
+ * OUT7 --+-|-|-|-|-|-|-|--|-----------|D7    Q7|-----|<
+ *        | | | | | | | |  |           `--------'
+ *        | | | | | | | |  |
+ *        | | | | | | | |  |           ,--------.
+ *        | | | | | | | |  `-----------|>    #1 |
+ *        | | | | | | | |              |        |
+ *        | | | | | | | `--------------|D0    Q0|-----|<
+ *        | | | | | | `----------------|D1    Q1|-----|<
+ *        | | | | | `------------------|D2    Q2|-----|<
+ *        | | | | `--------------------|D3    Q3|-----|<
+ *        | | | `----------------------|D4    Q4|-----|<
+ *        | | `------------------------|D5    Q5|-----|<
+ *        | `--------------------------|D6    Q6|-----|<
+ *        `----------------------------|D7    Q7|-----|<
+ *                                     `--------'
+ *
+ * The above is just an example. The actual number of number of latches and
+ * the number of inputs per latch is derived from the number of GPIOs given
+ * in the corresponding device tree properties.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include "gpiolib.h"
+
+struct gpio_latch_priv {
+	struct gpio_chip gc;
+	struct gpio_descs *clk_gpios;
+	struct gpio_descs *latched_gpios;
+	int n_latched_gpios;
+	unsigned int setup_duration_ns;
+	unsigned int clock_duration_ns;
+	unsigned long *shadow;
+	/*
+	 * Depending on whether any of the underlying GPIOs may sleep we either
+	 * use a mutex or a spinlock to protect our shadow map.
+	 */
+	union {
+		struct mutex mutex; /* protects @shadow */
+		spinlock_t spinlock; /* protects @shadow */
+	};
+};
+
+static int gpio_latch_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static void gpio_latch_set_unlocked(struct gpio_latch_priv *priv,
+				    void (*set)(struct gpio_desc *desc, int value),
+				    unsigned int offset, bool val)
+{
+	int latch = offset / priv->n_latched_gpios;
+	int i;
+
+	assign_bit(offset, priv->shadow, val);
+
+	for (i = 0; i < priv->n_latched_gpios; i++)
+		set(priv->latched_gpios->desc[i],
+		    test_bit(latch * priv->n_latched_gpios + i, priv->shadow));
+
+	ndelay(priv->setup_duration_ns);
+	set(priv->clk_gpios->desc[latch], 1);
+	ndelay(priv->clock_duration_ns);
+	set(priv->clk_gpios->desc[latch], 0);
+}
+
+static void gpio_latch_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct gpio_latch_priv *priv = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->spinlock, flags);
+
+	gpio_latch_set_unlocked(priv, gpiod_set_value, offset, val);
+
+	spin_unlock_irqrestore(&priv->spinlock, flags);
+}
+
+static void gpio_latch_set_can_sleep(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct gpio_latch_priv *priv = gpiochip_get_data(gc);
+
+	mutex_lock(&priv->mutex);
+
+	gpio_latch_set_unlocked(priv, gpiod_set_value_cansleep, offset, val);
+
+	mutex_unlock(&priv->mutex);
+}
+
+static bool gpio_latch_can_sleep(struct gpio_latch_priv *priv, unsigned int n_latches)
+{
+	int i;
+
+	for (i = 0; i < n_latches; i++)
+		if (gpiod_cansleep(priv->clk_gpios->desc[i]))
+			return true;
+
+	for (i = 0; i < priv->n_latched_gpios; i++)
+		if (gpiod_cansleep(priv->latched_gpios->desc[i]))
+			return true;
+
+	return false;
+}
+
+/*
+ * Some value which is still acceptable to delay in atomic context.
+ * If we need to go higher we might have to switch to usleep_range(),
+ * but that cannot ne used in atomic context and the driver would have
+ * to be adjusted to support that.
+ */
+#define DURATION_NS_MAX 5000
+
+static int gpio_latch_probe(struct platform_device *pdev)
+{
+	struct gpio_latch_priv *priv;
+	unsigned int n_latches;
+	struct device_node *np = pdev->dev.of_node;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk_gpios = devm_gpiod_get_array(&pdev->dev, "clk", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->clk_gpios))
+		return PTR_ERR(priv->clk_gpios);
+
+	priv->latched_gpios = devm_gpiod_get_array(&pdev->dev, "latched", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->latched_gpios))
+		return PTR_ERR(priv->latched_gpios);
+
+	n_latches = priv->clk_gpios->ndescs;
+	priv->n_latched_gpios = priv->latched_gpios->ndescs;
+
+	priv->shadow = devm_bitmap_zalloc(&pdev->dev, n_latches * priv->n_latched_gpios,
+					  GFP_KERNEL);
+	if (!priv->shadow)
+		return -ENOMEM;
+
+	if (gpio_latch_can_sleep(priv, n_latches)) {
+		priv->gc.can_sleep = true;
+		priv->gc.set = gpio_latch_set_can_sleep;
+		mutex_init(&priv->mutex);
+	} else {
+		priv->gc.can_sleep = false;
+		priv->gc.set = gpio_latch_set;
+		spin_lock_init(&priv->spinlock);
+	}
+
+	of_property_read_u32(np, "setup-duration-ns", &priv->setup_duration_ns);
+	if (priv->setup_duration_ns > DURATION_NS_MAX) {
+		dev_warn(&pdev->dev, "setup-duration-ns too high, limit to %d\n",
+			 DURATION_NS_MAX);
+		priv->setup_duration_ns = DURATION_NS_MAX;
+	}
+
+	of_property_read_u32(np, "clock-duration-ns", &priv->clock_duration_ns);
+	if (priv->clock_duration_ns > DURATION_NS_MAX) {
+		dev_warn(&pdev->dev, "clock-duration-ns too high, limit to %d\n",
+			 DURATION_NS_MAX);
+		priv->clock_duration_ns = DURATION_NS_MAX;
+	}
+
+	priv->gc.get_direction = gpio_latch_get_direction;
+	priv->gc.ngpio = n_latches * priv->n_latched_gpios;
+	priv->gc.owner = THIS_MODULE;
+	priv->gc.base = -1;
+	priv->gc.parent = &pdev->dev;
+
+	platform_set_drvdata(pdev, priv);
+
+	return devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv);
+}
+
+static const struct of_device_id gpio_latch_ids[] = {
+	{
+		.compatible = "gpio-latch",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, gpio_latch_ids);
+
+static struct platform_driver gpio_latch_driver = {
+	.driver	= {
+		.name		= "gpio-latch",
+		.of_match_table	= gpio_latch_ids,
+	},
+	.probe	= gpio_latch_probe,
+};
+module_platform_driver(gpio_latch_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("GPIO latch driver");