diff options
author | Davide Ciminaghi <ciminaghi@gnudd.com> | 2022-09-02 15:42:01 +0300 |
---|---|---|
committer | Bartosz Golaszewski <bartosz.golaszewski@linaro.org> | 2022-10-17 12:02:25 +0300 |
commit | 317627a4a19e2a6f8d60e3e2eefe6dfd87059d79 (patch) | |
tree | 945c2011f53fd3e46271f40af2a87d9a46a4a4b4 /drivers/gpio/gpio-sta2x11.c | |
parent | bf08ce132cd069afc45635e1ffeb6adb0523cc60 (diff) | |
download | linux-317627a4a19e2a6f8d60e3e2eefe6dfd87059d79.tar.xz |
gpio: Remove sta2x11 GPIO driver
The Connext chip has 4 gpio cells looking very similar to those of the
Nomadik, whose gpio/pinctrl driver (already featuring devicetree support)
will be used instead of the sta2x11 specific one.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Diffstat (limited to 'drivers/gpio/gpio-sta2x11.c')
-rw-r--r-- | drivers/gpio/gpio-sta2x11.c | 411 |
1 files changed, 0 insertions, 411 deletions
diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c deleted file mode 100644 index e07cca0f8d35..000000000000 --- a/drivers/gpio/gpio-sta2x11.c +++ /dev/null @@ -1,411 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * STMicroelectronics ConneXt (STA2X11) GPIO driver - * - * Copyright 2012 ST Microelectronics (Alessandro Rubini) - * Based on gpio-ml-ioh.c, Copyright 2010 OKI Semiconductors Ltd. - * Also based on previous sta2x11 work, Copyright 2011 Wind River Systems, Inc. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/gpio/driver.h> -#include <linux/bitops.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/mfd/sta2x11-mfd.h> - -struct gsta_regs { - u32 dat; /* 0x00 */ - u32 dats; - u32 datc; - u32 pdis; - u32 dir; /* 0x10 */ - u32 dirs; - u32 dirc; - u32 unused_1c; - u32 afsela; /* 0x20 */ - u32 unused_24[7]; - u32 rimsc; /* 0x40 */ - u32 fimsc; - u32 is; - u32 ic; -}; - -struct gsta_gpio { - spinlock_t lock; - struct device *dev; - void __iomem *reg_base; - struct gsta_regs __iomem *regs[GSTA_NR_BLOCKS]; - struct gpio_chip gpio; - int irq_base; - /* FIXME: save the whole config here (AF, ...) */ - unsigned irq_type[GSTA_NR_GPIO]; -}; - -/* - * gpio methods - */ - -static void gsta_gpio_set(struct gpio_chip *gpio, unsigned nr, int val) -{ - struct gsta_gpio *chip = gpiochip_get_data(gpio); - struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; - u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); - - if (val) - writel(bit, ®s->dats); - else - writel(bit, ®s->datc); -} - -static int gsta_gpio_get(struct gpio_chip *gpio, unsigned nr) -{ - struct gsta_gpio *chip = gpiochip_get_data(gpio); - struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; - u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); - - return !!(readl(®s->dat) & bit); -} - -static int gsta_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, - int val) -{ - struct gsta_gpio *chip = gpiochip_get_data(gpio); - struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; - u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); - - writel(bit, ®s->dirs); - /* Data register after direction, otherwise pullup/down is selected */ - if (val) - writel(bit, ®s->dats); - else - writel(bit, ®s->datc); - return 0; -} - -static int gsta_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) -{ - struct gsta_gpio *chip = gpiochip_get_data(gpio); - struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; - u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); - - writel(bit, ®s->dirc); - return 0; -} - -static int gsta_gpio_to_irq(struct gpio_chip *gpio, unsigned offset) -{ - struct gsta_gpio *chip = gpiochip_get_data(gpio); - return chip->irq_base + offset; -} - -static void gsta_gpio_setup(struct gsta_gpio *chip) /* called from probe */ -{ - struct gpio_chip *gpio = &chip->gpio; - - /* - * ARCH_NR_GPIOS is currently 256 and dynamic allocation starts - * from the end. However, for compatibility, we need the first - * ConneXt device to start from gpio 0: it's the main chipset - * on most boards so documents and drivers assume gpio0..gpio127 - */ - static int gpio_base; - - gpio->label = dev_name(chip->dev); - gpio->owner = THIS_MODULE; - gpio->direction_input = gsta_gpio_direction_input; - gpio->get = gsta_gpio_get; - gpio->direction_output = gsta_gpio_direction_output; - gpio->set = gsta_gpio_set; - gpio->dbg_show = NULL; - gpio->base = gpio_base; - gpio->ngpio = GSTA_NR_GPIO; - gpio->can_sleep = false; - gpio->to_irq = gsta_gpio_to_irq; - - /* - * After the first device, turn to dynamic gpio numbers. - * For example, with ARCH_NR_GPIOS = 256 we can fit two cards - */ - if (!gpio_base) - gpio_base = -1; -} - -/* - * Special method: alternate functions and pullup/pulldown. This is only - * invoked on startup to configure gpio's according to platform data. - * FIXME : this functionality shall be managed (and exported to other drivers) - * via the pin control subsystem. - */ -static void gsta_set_config(struct gsta_gpio *chip, int nr, unsigned cfg) -{ - struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; - unsigned long flags; - u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); - u32 val; - int err = 0; - - pr_info("%s: %p %i %i\n", __func__, chip, nr, cfg); - - if (cfg == PINMUX_TYPE_NONE) - return; - - /* Alternate function or not? */ - spin_lock_irqsave(&chip->lock, flags); - val = readl(®s->afsela); - if (cfg == PINMUX_TYPE_FUNCTION) - val |= bit; - else - val &= ~bit; - writel(val | bit, ®s->afsela); - if (cfg == PINMUX_TYPE_FUNCTION) { - spin_unlock_irqrestore(&chip->lock, flags); - return; - } - - /* not alternate function: set details */ - switch (cfg) { - case PINMUX_TYPE_OUTPUT_LOW: - writel(bit, ®s->dirs); - writel(bit, ®s->datc); - break; - case PINMUX_TYPE_OUTPUT_HIGH: - writel(bit, ®s->dirs); - writel(bit, ®s->dats); - break; - case PINMUX_TYPE_INPUT: - writel(bit, ®s->dirc); - val = readl(®s->pdis) | bit; - writel(val, ®s->pdis); - break; - case PINMUX_TYPE_INPUT_PULLUP: - writel(bit, ®s->dirc); - val = readl(®s->pdis) & ~bit; - writel(val, ®s->pdis); - writel(bit, ®s->dats); - break; - case PINMUX_TYPE_INPUT_PULLDOWN: - writel(bit, ®s->dirc); - val = readl(®s->pdis) & ~bit; - writel(val, ®s->pdis); - writel(bit, ®s->datc); - break; - default: - err = 1; - } - spin_unlock_irqrestore(&chip->lock, flags); - if (err) - pr_err("%s: chip %p, pin %i, cfg %i is invalid\n", - __func__, chip, nr, cfg); -} - -/* - * Irq methods - */ - -static void gsta_irq_disable(struct irq_data *data) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); - struct gsta_gpio *chip = gc->private; - int nr = data->irq - chip->irq_base; - struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; - u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); - u32 val; - unsigned long flags; - - spin_lock_irqsave(&chip->lock, flags); - if (chip->irq_type[nr] & IRQ_TYPE_EDGE_RISING) { - val = readl(®s->rimsc) & ~bit; - writel(val, ®s->rimsc); - } - if (chip->irq_type[nr] & IRQ_TYPE_EDGE_FALLING) { - val = readl(®s->fimsc) & ~bit; - writel(val, ®s->fimsc); - } - spin_unlock_irqrestore(&chip->lock, flags); - return; -} - -static void gsta_irq_enable(struct irq_data *data) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); - struct gsta_gpio *chip = gc->private; - int nr = data->irq - chip->irq_base; - struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK]; - u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK); - u32 val; - int type; - unsigned long flags; - - type = chip->irq_type[nr]; - - spin_lock_irqsave(&chip->lock, flags); - val = readl(®s->rimsc); - if (type & IRQ_TYPE_EDGE_RISING) - writel(val | bit, ®s->rimsc); - else - writel(val & ~bit, ®s->rimsc); - val = readl(®s->rimsc); - if (type & IRQ_TYPE_EDGE_FALLING) - writel(val | bit, ®s->fimsc); - else - writel(val & ~bit, ®s->fimsc); - spin_unlock_irqrestore(&chip->lock, flags); - return; -} - -static int gsta_irq_type(struct irq_data *d, unsigned int type) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - struct gsta_gpio *chip = gc->private; - int nr = d->irq - chip->irq_base; - - /* We only support edge interrupts */ - if (!(type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))) { - pr_debug("%s: unsupported type 0x%x\n", __func__, type); - return -EINVAL; - } - - chip->irq_type[nr] = type; /* used for enable/disable */ - - gsta_irq_enable(d); - return 0; -} - -static irqreturn_t gsta_gpio_handler(int irq, void *dev_id) -{ - struct gsta_gpio *chip = dev_id; - struct gsta_regs __iomem *regs; - u32 is; - int i, nr, base; - irqreturn_t ret = IRQ_NONE; - - for (i = 0; i < GSTA_NR_BLOCKS; i++) { - regs = chip->regs[i]; - base = chip->irq_base + i * GSTA_GPIO_PER_BLOCK; - while ((is = readl(®s->is))) { - nr = __ffs(is); - irq = base + nr; - generic_handle_irq(irq); - writel(1 << nr, ®s->ic); - ret = IRQ_HANDLED; - } - } - return ret; -} - -static int gsta_alloc_irq_chip(struct gsta_gpio *chip) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - int rv; - - gc = devm_irq_alloc_generic_chip(chip->dev, KBUILD_MODNAME, 1, - chip->irq_base, - chip->reg_base, handle_simple_irq); - if (!gc) - return -ENOMEM; - - gc->private = chip; - ct = gc->chip_types; - - ct->chip.irq_set_type = gsta_irq_type; - ct->chip.irq_disable = gsta_irq_disable; - ct->chip.irq_enable = gsta_irq_enable; - - /* FIXME: this makes at most 32 interrupts. Request 0 by now */ - rv = devm_irq_setup_generic_chip(chip->dev, gc, - 0 /* IRQ_MSK(GSTA_GPIO_PER_BLOCK) */, - 0, IRQ_NOREQUEST | IRQ_NOPROBE, 0); - if (rv) - return rv; - - /* Set up all 128 interrupts: code from setup_generic_chip */ - { - struct irq_chip_type *ct = gc->chip_types; - int i, j; - for (j = 0; j < GSTA_NR_GPIO; j++) { - i = chip->irq_base + j; - irq_set_chip_and_handler(i, &ct->chip, ct->handler); - irq_set_chip_data(i, gc); - irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE); - } - gc->irq_cnt = i - gc->irq_base; - } - - return 0; -} - -/* The platform device used here is instantiated by the MFD device */ -static int gsta_probe(struct platform_device *dev) -{ - int i, err; - struct pci_dev *pdev; - struct sta2x11_gpio_pdata *gpio_pdata; - struct gsta_gpio *chip; - - pdev = *(struct pci_dev **)dev_get_platdata(&dev->dev); - gpio_pdata = dev_get_platdata(&pdev->dev); - - if (gpio_pdata == NULL) - dev_err(&dev->dev, "no gpio config\n"); - pr_debug("gpio config: %p\n", gpio_pdata); - - chip = devm_kzalloc(&dev->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - chip->dev = &dev->dev; - chip->reg_base = devm_platform_ioremap_resource(dev, 0); - if (IS_ERR(chip->reg_base)) - return PTR_ERR(chip->reg_base); - - for (i = 0; i < GSTA_NR_BLOCKS; i++) { - chip->regs[i] = chip->reg_base + i * 4096; - /* disable all irqs */ - writel(0, &chip->regs[i]->rimsc); - writel(0, &chip->regs[i]->fimsc); - writel(~0, &chip->regs[i]->ic); - } - spin_lock_init(&chip->lock); - gsta_gpio_setup(chip); - if (gpio_pdata) - for (i = 0; i < GSTA_NR_GPIO; i++) - gsta_set_config(chip, i, gpio_pdata->pinconfig[i]); - - /* 384 was used in previous code: be compatible for other drivers */ - err = devm_irq_alloc_descs(&dev->dev, -1, 384, - GSTA_NR_GPIO, NUMA_NO_NODE); - if (err < 0) { - dev_warn(&dev->dev, "sta2x11 gpio: Can't get irq base (%i)\n", - -err); - return err; - } - chip->irq_base = err; - - err = gsta_alloc_irq_chip(chip); - if (err) - return err; - - err = devm_request_irq(&dev->dev, pdev->irq, gsta_gpio_handler, - IRQF_SHARED, KBUILD_MODNAME, chip); - if (err < 0) { - dev_err(&dev->dev, "sta2x11 gpio: Can't request irq (%i)\n", - -err); - return err; - } - - return devm_gpiochip_add_data(&dev->dev, &chip->gpio, chip); -} - -static struct platform_driver sta2x11_gpio_platform_driver = { - .driver = { - .name = "sta2x11-gpio", - .suppress_bind_attrs = true, - }, - .probe = gsta_probe, -}; -builtin_platform_driver(sta2x11_gpio_platform_driver); |