summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-xlp.c
diff options
context:
space:
mode:
authorKamlakant Patel <kamlakant.patel@broadcom.com>2015-04-28 17:40:45 +0300
committerLinus Walleij <linus.walleij@linaro.org>2015-05-06 17:33:56 +0300
commitff71880006795290f371caae13e740491ec76956 (patch)
tree2cab68fcb36b26e208a4fba1f5031ec1597895d1 /drivers/gpio/gpio-xlp.c
parenta605c668cc0c0ed267c014267f04bef29460367d (diff)
downloadlinux-ff71880006795290f371caae13e740491ec76956.tar.xz
gpio: xlp: GPIO controller for Netlogic XLP SoCs
Add GPIO controller driver for Netlogic XLP MIPS64 SOCs. This driver is instantiated by device tree and supports interrupts for GPIOs. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio/gpio-xlp.c')
-rw-r--r--drivers/gpio/gpio-xlp.c425
1 files changed, 425 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-xlp.c b/drivers/gpio/gpio-xlp.c
new file mode 100644
index 000000000000..8532697768f6
--- /dev/null
+++ b/drivers/gpio/gpio-xlp.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright (C) 2003-2015 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+/*
+ * XLP GPIO has multiple 32 bit registers for each feature where each register
+ * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
+ * require 3 32-bit registers for each feature.
+ * Here we only define offset of the first register for each feature. Offset of
+ * the registers for pins greater than 32 can be calculated as following(Use
+ * GPIO_INT_STAT as example):
+ *
+ * offset = (gpio / XLP_GPIO_REGSZ) * 4;
+ * reg_addr = addr + offset;
+ *
+ * where addr is base address of the that feature register and gpio is the pin.
+ */
+#define GPIO_OUTPUT_EN 0x00
+#define GPIO_PADDRV 0x08
+#define GPIO_INT_EN00 0x18
+#define GPIO_INT_EN10 0x20
+#define GPIO_INT_EN20 0x28
+#define GPIO_INT_EN30 0x30
+#define GPIO_INT_POL 0x38
+#define GPIO_INT_TYPE 0x40
+#define GPIO_INT_STAT 0x48
+
+#define GPIO_9XX_BYTESWAP 0X00
+#define GPIO_9XX_CTRL 0X04
+#define GPIO_9XX_OUTPUT_EN 0x14
+#define GPIO_9XX_PADDRV 0x24
+/*
+ * Only for 4 interrupt enable reg are defined for now,
+ * total reg available are 12.
+ */
+#define GPIO_9XX_INT_EN00 0x44
+#define GPIO_9XX_INT_EN10 0x54
+#define GPIO_9XX_INT_EN20 0x64
+#define GPIO_9XX_INT_EN30 0x74
+#define GPIO_9XX_INT_POL 0x104
+#define GPIO_9XX_INT_TYPE 0x114
+#define GPIO_9XX_INT_STAT 0x124
+
+#define GPIO_3XX_INT_EN00 0x18
+#define GPIO_3XX_INT_EN10 0x20
+#define GPIO_3XX_INT_EN20 0x28
+#define GPIO_3XX_INT_EN30 0x30
+#define GPIO_3XX_INT_POL 0x78
+#define GPIO_3XX_INT_TYPE 0x80
+#define GPIO_3XX_INT_STAT 0x88
+
+/* Interrupt type register mask */
+#define XLP_GPIO_IRQ_TYPE_LVL 0x0
+#define XLP_GPIO_IRQ_TYPE_EDGE 0x1
+
+/* Interrupt polarity register mask */
+#define XLP_GPIO_IRQ_POL_HIGH 0x0
+#define XLP_GPIO_IRQ_POL_LOW 0x1
+
+#define XLP_GPIO_REGSZ 32
+#define XLP_GPIO_IRQ_BASE 768
+#define XLP_MAX_NR_GPIO 96
+
+/* XLP variants supported by this driver */
+enum {
+ XLP_GPIO_VARIANT_XLP832 = 1,
+ XLP_GPIO_VARIANT_XLP316,
+ XLP_GPIO_VARIANT_XLP208,
+ XLP_GPIO_VARIANT_XLP980,
+ XLP_GPIO_VARIANT_XLP532
+};
+
+struct xlp_gpio_priv {
+ struct gpio_chip chip;
+ DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
+ void __iomem *gpio_intr_en; /* pointer to first intr enable reg */
+ void __iomem *gpio_intr_stat; /* pointer to first intr status reg */
+ void __iomem *gpio_intr_type; /* pointer to first intr type reg */
+ void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */
+ void __iomem *gpio_out_en; /* pointer to first output enable reg */
+ void __iomem *gpio_paddrv; /* pointer to first pad drive reg */
+ spinlock_t lock;
+};
+
+static struct xlp_gpio_priv *gpio_chip_to_xlp_priv(struct gpio_chip *gc)
+{
+ return container_of(gc, struct xlp_gpio_priv, chip);
+}
+
+static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
+{
+ u32 pos, regset;
+
+ pos = gpio % XLP_GPIO_REGSZ;
+ regset = (gpio / XLP_GPIO_REGSZ) * 4;
+ return !!(readl(addr + regset) & BIT(pos));
+}
+
+static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
+{
+ u32 value, pos, regset;
+
+ pos = gpio % XLP_GPIO_REGSZ;
+ regset = (gpio / XLP_GPIO_REGSZ) * 4;
+ value = readl(addr + regset);
+
+ if (state)
+ value |= BIT(pos);
+ else
+ value &= ~BIT(pos);
+
+ writel(value, addr + regset);
+}
+
+static void xlp_gpio_irq_disable(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+ __clear_bit(d->hwirq, priv->gpio_enabled_mask);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_mask_ack(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+ xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
+ __clear_bit(d->hwirq, priv->gpio_enabled_mask);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_unmask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
+ __set_bit(d->hwirq, priv->gpio_enabled_mask);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+ int pol, irq_type;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+ pol = XLP_GPIO_IRQ_POL_HIGH;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+ pol = XLP_GPIO_IRQ_POL_LOW;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+ pol = XLP_GPIO_IRQ_POL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+ pol = XLP_GPIO_IRQ_POL_LOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
+ xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
+
+ return 0;
+}
+
+static struct irq_chip xlp_gpio_irq_chip = {
+ .name = "XLP-GPIO",
+ .irq_mask_ack = xlp_gpio_irq_mask_ack,
+ .irq_disable = xlp_gpio_irq_disable,
+ .irq_set_type = xlp_gpio_set_irq_type,
+ .irq_unmask = xlp_gpio_irq_unmask,
+ .flags = IRQCHIP_ONESHOT_SAFE,
+};
+
+static irqreturn_t xlp_gpio_generic_handler(int irq, void *data)
+{
+ struct xlp_gpio_priv *priv = data;
+ int gpio, regoff;
+ u32 gpio_stat;
+
+ regoff = -1;
+ gpio_stat = 0;
+ for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
+ if (regoff != gpio / XLP_GPIO_REGSZ) {
+ regoff = gpio / XLP_GPIO_REGSZ;
+ gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
+ }
+ if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
+ generic_handle_irq(irq_find_mapping(
+ priv->chip.irqdomain, gpio));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
+
+ return 0;
+}
+
+static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
+
+ return 0;
+}
+
+static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
+}
+
+static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
+{
+ struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+ BUG_ON(gpio >= gc->ngpio);
+ xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
+}
+
+static const struct of_device_id xlp_gpio_of_ids[] = {
+ {
+ .compatible = "netlogic,xlp832-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP832,
+ },
+ {
+ .compatible = "netlogic,xlp316-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP316,
+ },
+ {
+ .compatible = "netlogic,xlp208-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP208,
+ },
+ {
+ .compatible = "netlogic,xlp980-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP980,
+ },
+ {
+ .compatible = "netlogic,xlp532-gpio",
+ .data = (void *)XLP_GPIO_VARIANT_XLP532,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
+
+static int xlp_gpio_probe(struct platform_device *pdev)
+{
+ struct gpio_chip *gc;
+ struct resource *iores;
+ struct xlp_gpio_priv *priv;
+ const struct of_device_id *of_id;
+ void __iomem *gpio_base;
+ int irq_base, irq, err;
+ int ngpio;
+ u32 soc_type;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores)
+ return -ENODEV;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ gpio_base = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(gpio_base))
+ return PTR_ERR(gpio_base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ of_id = of_match_device(xlp_gpio_of_ids, &pdev->dev);
+ if (!of_id) {
+ dev_err(&pdev->dev, "Failed to get soc type!\n");
+ return -ENODEV;
+ }
+
+ soc_type = (uintptr_t) of_id->data;
+
+ switch (soc_type) {
+ case XLP_GPIO_VARIANT_XLP832:
+ priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+ priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+ priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
+ priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
+ priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
+ priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
+ ngpio = 41;
+ break;
+ case XLP_GPIO_VARIANT_XLP208:
+ case XLP_GPIO_VARIANT_XLP316:
+ priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+ priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+ priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
+ priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
+ priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
+ priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
+
+ ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
+ break;
+ case XLP_GPIO_VARIANT_XLP980:
+ case XLP_GPIO_VARIANT_XLP532:
+ priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
+ priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
+ priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
+ priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
+ priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
+ priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
+
+ ngpio = (soc_type == XLP_GPIO_VARIANT_XLP980) ? 66 : 67;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown Processor type!\n");
+ return -ENODEV;
+ }
+
+ bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
+
+ gc = &priv->chip;
+
+ gc->base = 0;
+ gc->dev = &pdev->dev;
+ gc->ngpio = ngpio;
+ gc->of_node = pdev->dev.of_node;
+ gc->direction_output = xlp_gpio_dir_output;
+ gc->direction_input = xlp_gpio_dir_input;
+ gc->set = xlp_gpio_set;
+ gc->get = xlp_gpio_get;
+
+ spin_lock_init(&priv->lock);
+
+ err = devm_request_irq(&pdev->dev, irq, xlp_gpio_generic_handler,
+ IRQ_TYPE_NONE, pdev->name, priv);
+ if (err)
+ return err;
+
+ irq_base = irq_alloc_descs(-1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0);
+ if (irq_base < 0) {
+ dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
+ return err;
+ }
+
+ err = gpiochip_add(gc);
+ if (err < 0)
+ goto out_free_desc;
+
+ err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base,
+ handle_level_irq, IRQ_TYPE_NONE);
+ if (err) {
+ dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n");
+ goto out_gpio_remove;
+ }
+
+ dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
+
+ return 0;
+
+out_gpio_remove:
+ gpiochip_remove(gc);
+out_free_desc:
+ irq_free_descs(irq_base, gc->ngpio);
+ return err;
+}
+
+static struct platform_driver xlp_gpio_driver = {
+ .driver = {
+ .name = "xlp-gpio",
+ .of_match_table = xlp_gpio_of_ids,
+ },
+ .probe = xlp_gpio_probe,
+};
+module_platform_driver(xlp_gpio_driver);
+
+MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
+MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
+MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
+MODULE_LICENSE("GPL v2");