summaryrefslogtreecommitdiff
path: root/drivers/gpio
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2009-07-27 17:46:00 +0400
committerSamuel Ortiz <sameo@linux.intel.com>2009-09-17 11:47:01 +0400
commite4b736f18f338daae141325c818187c4ab3e244c (patch)
treeabe885fbfdf4f9f53165ba4ce8e4e0491e698182 /drivers/gpio
parentb11062b9c558695cd054f16c697e1db0988e2603 (diff)
downloadlinux-e4b736f18f338daae141325c818187c4ab3e244c.tar.xz
gpio: Add WM831X GPIO driver
Add support for the GPIO pins on the WM831x. No direct support is currently supplied for configuring non-gpiolib functionality such as pull configuration and alternate functions, soft configuration of these will be provided in a future patch. Currently use of these pins as interrupts is not supported due to the ongoing issues with generic irq not support interrupt controllers on interrupt driven buses. Users can directly request the interrupts with the wm831x-specific APIs currently provided if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig7
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/wm831x-gpio.c252
3 files changed, 260 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 96dda81c9228..6b4c484a699a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -155,6 +155,13 @@ config GPIO_TWL4030
Say yes here to access the GPIO signals of various multi-function
power management chips from Texas Instruments.
+config GPIO_WM831X
+ tristate "WM831x GPIOs"
+ depends on MFD_WM831X
+ help
+ Say yes here to access the GPIO signals of WM831x power management
+ chips from Wolfson Microelectronics.
+
comment "PCI GPIO expanders:"
config GPIO_BT8XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9244c6fcd8be..ea7c745f26a8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
new file mode 100644
index 000000000000..f9c09a54ec7f
--- /dev/null
+++ b/drivers/gpio/wm831x-gpio.c
@@ -0,0 +1,252 @@
+/*
+ * wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#define WM831X_GPIO_MAX 16
+
+struct wm831x_gpio {
+ struct wm831x *wm831x;
+ struct gpio_chip gpio_chip;
+};
+
+static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct wm831x_gpio, gpio_chip);
+}
+
+static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+ WM831X_GPN_DIR | WM831X_GPN_TRI,
+ WM831X_GPN_DIR);
+}
+
+static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+ if (ret < 0)
+ return ret;
+
+ if (ret & 1 << offset)
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+ WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
+}
+
+static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
+ value << offset);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int i;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ int gpio = i + chip->base;
+ int reg;
+ const char *label, *pull, *powerdomain;
+
+ /* We report the GPIO even if it's not requested since
+ * we're also reporting things like alternate
+ * functions which apply even when the GPIO is not in
+ * use as a GPIO.
+ */
+ label = gpiochip_is_requested(chip, i);
+ if (!label)
+ label = "Unrequested";
+
+ seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
+
+ reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
+ if (reg < 0) {
+ dev_err(wm831x->dev,
+ "GPIO control %d read failed: %d\n",
+ gpio, reg);
+ seq_printf(s, "\n");
+ continue;
+ }
+
+ switch (reg & WM831X_GPN_PULL_MASK) {
+ case WM831X_GPIO_PULL_NONE:
+ pull = "nopull";
+ break;
+ case WM831X_GPIO_PULL_DOWN:
+ pull = "pulldown";
+ break;
+ case WM831X_GPIO_PULL_UP:
+ pull = "pullup";
+ default:
+ pull = "INVALID PULL";
+ break;
+ }
+
+ switch (i + 1) {
+ case 1 ... 3:
+ case 7 ... 9:
+ if (reg & WM831X_GPN_PWR_DOM)
+ powerdomain = "VPMIC";
+ else
+ powerdomain = "DBVDD";
+ break;
+
+ case 4 ... 6:
+ case 10 ... 12:
+ if (reg & WM831X_GPN_PWR_DOM)
+ powerdomain = "SYSVDD";
+ else
+ powerdomain = "DBVDD";
+ break;
+
+ case 13 ... 16:
+ powerdomain = "TPVDD";
+ break;
+
+ default:
+ BUG();
+ break;
+ }
+
+ seq_printf(s, " %s %s %s %s%s\n"
+ " %s%s (0x%4x)\n",
+ reg & WM831X_GPN_DIR ? "in" : "out",
+ wm831x_gpio_get(chip, i) ? "high" : "low",
+ pull,
+ powerdomain,
+ reg & WM831X_GPN_POL ? " inverted" : "",
+ reg & WM831X_GPN_OD ? "open-drain" : "CMOS",
+ reg & WM831X_GPN_TRI ? " tristated" : "",
+ reg);
+ }
+}
+#else
+#define wm831x_gpio_dbg_show NULL
+#endif
+
+static struct gpio_chip template_chip = {
+ .label = "wm831x",
+ .owner = THIS_MODULE,
+ .direction_input = wm831x_gpio_direction_in,
+ .get = wm831x_gpio_get,
+ .direction_output = wm831x_gpio_direction_out,
+ .set = wm831x_gpio_set,
+ .dbg_show = wm831x_gpio_dbg_show,
+ .can_sleep = 1,
+};
+
+static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ struct wm831x_gpio *wm831x_gpio;
+ int ret;
+
+ wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL);
+ if (wm831x_gpio == NULL)
+ return -ENOMEM;
+
+ wm831x_gpio->wm831x = wm831x;
+ wm831x_gpio->gpio_chip = template_chip;
+ wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
+ wm831x_gpio->gpio_chip.dev = &pdev->dev;
+ if (pdata && pdata->gpio_base)
+ wm831x_gpio->gpio_chip.base = pdata->gpio_base;
+ else
+ wm831x_gpio->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&wm831x_gpio->gpio_chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+ ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, wm831x_gpio);
+
+ return ret;
+
+err:
+ kfree(wm831x_gpio);
+ return ret;
+}
+
+static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
+{
+ struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&wm831x_gpio->gpio_chip);
+ if (ret == 0)
+ kfree(wm831x_gpio);
+
+ return ret;
+}
+
+static struct platform_driver wm831x_gpio_driver = {
+ .driver.name = "wm831x-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = wm831x_gpio_probe,
+ .remove = __devexit_p(wm831x_gpio_remove),
+};
+
+static int __init wm831x_gpio_init(void)
+{
+ return platform_driver_register(&wm831x_gpio_driver);
+}
+subsys_initcall(wm831x_gpio_init);
+
+static void __exit wm831x_gpio_exit(void)
+{
+ platform_driver_unregister(&wm831x_gpio_driver);
+}
+module_exit(wm831x_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-gpio");