Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "There are a bunch of changes all over in the usual places.

  Highlights:

   - habanalabs moves from misc to accel

   - first accel driver for Intel VPU (Versatile Processing Unit)
     inference engine

   - dropped all the ancient legacy DRI1 drivers. I think it's been at
     least 10 years since anyone has heard about these.

   - Intel DG2 updates and prelim Meteorlake enablement

   - etnaviv adds support for Versilicon NPU device (a GPU like engine
     with inference accelerators)

  Detailed summary:

  Removals:
   - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via

  New driver:
   - intel VPU accelerator driver
   - habanalabs comes via drm tree now

  drm/core:
   - use drm_dbg_ helpers in several places
   - Document defaults for CRTC backgrounds
   - Document use of drm_minor

  edid:
   - improve mode parsing and refactoring

  connector:
   - support analog TV mode property

  media:
   - add some common formats

  udmabuf:
   - add vmap/vunmap methods

  fourcc:
   - add XRGB1555 and RGB565 formats
   - document open source user waiver

  firmware:
   - fix color-format selection for system framebuffer

  format-helper:
   - Add conversion from XRGB8888 to various sysfb formats
   - Make XRGB8888 the only driver-emulated legacy format
   - Add conversion from XRGB8888 to XBGR8888 and ABGR8888

  fb-helper:
   - fix preferred depth and bpp values across drivers
   - Avoid blank consoles from selecting an incorrect color format

  probe-helper:
   - Enable/disable HPD on connectors

  scheduler:
   - Fix lockup in drm_sched_entity_kill()
   - Deprecate drm_sched_resubmit_jobs()

  bridge:
   - remove unused functions
   - implement i2c probe_new in various drivers
   - ite-it6505: Locking fixes, Cache EDID data
   - ite-it66121: Support IT6610 chip
   - lontium-tl9611: Fix HDMI on DragonBoard 845c
   - parade-ps8640: Use atomic bridge functions
   - Support i.MX93 LDB plus DT bindings

  debugfs:
   - add per device helpers and convert drivers

  displayport:
   - mst fixes
   - add DP adaptive sync DPCD definitions

  fbdev:
   - always pick 32bpp as default
   - remove some unused code

  simpledrm:
   - support system memory framebuffers

  panel:
   - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
   - Use ktime_get_boottime() to measure power-down delay
   - Fix auto-suspend delay
   - Visionox VTDR6130 AMOLED DSI
   - Support Himax HX8394
   - Convert many drivers to common generic DSI write-sequence helper
   - AUO A030JTN01

  ttm:
   - drop bo wait wrapper
   - fix MIPS build

  habanalabs:
   - moved driver to accel subsystem
   - gaudi2 decoder error improvement
   - more trace events
   - Gaudi2 abrupt reset by firmware support
   - add uAPI to flush memory transactions
   - add uAPI to pass through userspace reqs to fw
   - remove dma-buf export by handle

  amdgpu:
   - add new INFO queries for peak and min sclk/mclk for profile modes
   - Add PCIe info to the INFO IOCTL
   - secure display support for multiple displays
   - DML optimizations
   - DCN 3.2 updates
   - PSR updates
   - DP 2.1 updates
   - SR-IOV RAS updates
   - VCN RAS support
   - SMU 13.x updates
   - Switch 1 element arrays to flexible arrays
   - Add RAS support for DF 4.3
   - Stack size improvements
   - S0ix rework
   - Allow 0 as a vram limit on APUs
   - Handle profiling modes for SMU13.x
   - Fix possible segfault in failure case
   - Rework FW requests to happen in early_init for all IPs so that we
     don't lose the sbios console if FW is missing
   - Fix power reporting on certain firmwares for CZN/RN
   - Allow S0ix without BIOS support
   - Enable freesync over PCon
   - Re-enable the AGP aperture on GMC 11.x

  amdkfd:
   - Error handling fixes
   - PASID fixes
   - Fix for cleared VRAM BOs
   - Fix cleanup if GPUVM creation fails
   - Memory accounting fix
   - Use resource_size rather than open codeing it
   - GC11 mGPU fix

  radeon:
   - Switch 1 element arrays to flexible arrays
   - Fix memory leak on shutdown
   - move to new logging

  i915:
   - Meteorlake display/OA/GSC fw/workarounds enabling
   - DP MST DSC support
   - Gamma/degamma readout support for the state checker
   - Enable SDP split support for DP 2.0
   - Add probe blocking support to i915.force_probe parameter
   - Enable Xe HP 4tile support
   - Avoid display direct calls to uncore
   - Fix HuC delayed load memory leaks
   - Add DG2 workarounds Wa_18018764978 and Wa_18019271663
   - Improve suspend / resume times with VT-d scanout workaround active
   - Fix DG2 visual corruption on small BAR systems by not forgetting to
     copy CCS aux state
   - Fix TLB invalidation for Gen12.50 video and compute engines
   - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
     drm_edid
   - Start using unversioned DMC firmware paths for new platforms
   - ELD refactor: Stop using hardware buffer, precompute ELD
   - lots of display code refactoring

  nouveau:
   - drop legacy ioctl support
   - replace 0-sized array

  msm:
   - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
   - Added bindings for SM8150
   - dpu: Partial support for DSC on SM8150 and SM8250
   - dpu: Fixed color transformation matrix being lost on suspend/resume
   - dp: Support SDM845 and SC8280XP platforms
   - dp: Support for limiting DP link rate via DT property
   - dsi: Validate display modes according to the DSI OPP table
   - dsi: DSI PHY support for the SM6375 platform
   - Add MSM_SUBMIT_BO_NO_IMPLICI
   - a2xx: Support to load legacy firmware
   - a6xx: GPU devcore dump updates for a650/a660
   - GPU devfreq tuning and fixes
   - Turn 8960 HDMI PHY into clock provider,
   - Make 8960 HDMI PHY use PXO clock from DT

  etnaviv:
   - experimental versilicon NPU support
   - report GPU load via fdinfo format
   - MMU fault message improvements

  tegra:
   - rework syncpoint interrupt

  mediatek:
   - DSI timing fix
   - fix config deps

  ast:
   - various fixes

  exynos:
   - restore bridge chain order fixes

  gud:
   - convert to shadow plane buffers
   - perform flushing synchronously during atomic update
   - Use new debugfs helpers

  arm/hdlcd:
   - Use new debugfs helper

  ili9486:
   - Support 16-bit pixel data

  imx:
   - Split off IPUv3 driver

  mipi-dbi:
   - convert to DRM shadow-plane helpers
   - rsp driver changes
   - Support separate I/O-voltage supply

  mxsfb:
   - Depend on ARCH_MXS or ARCH_MXC

  sun4i:
   - convert to new TV mode property

  vc4:
   - convert to new TV mode property
   - kunit tests
   - Support RGB565 and RGB666 formats
   - convert dsi driver to bridge
   - Various HVS an CRTC fixes

  v3d:
   - Do not opencode drm_gem_object_lookup()

  virtio:
   - improve tracing

  vkms:
   - support small cursors in IGT tests
   - Fix SEGFAULT from incorrect GEM-buffer mapping

  rcar-du:
   - fixes and improvements"

* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
  msm/fbdev: fix unused variable warning with clang.
  drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
  dma-buf: make kobj_type structure constant
  drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
  drm/amd/display: disable SubVP + DRR to prevent underflow
  drm/amd/display: Fail atomic_check early on normalize_zpos error
  drm/amd/pm: avoid unaligned access warnings
  drm/amd/display: avoid unaligned access warnings
  drm/amd/display: Remove duplicate/repeating expressions
  drm/amd/display: Remove duplicate/repeating expression
  drm/amd/display: Make variables declaration inside ifdef guard
  drm/amd/display: Fix excess arguments on kernel-doc
  drm/amd/display: Add previously missing includes
  drm/amd/amdgpu: Add function prototypes to headers
  drm/amd/display: Add function prototypes to headers
  drm/amd/display: Turn global functions into static
  drm/amd/display: remove unused _calculate_degamma_curve function
  drm/amd/display: remove unused func declaration from resource headers
  drm/amd/display: unset initial value for tf since it's never used
  drm/amd/display: camel case cleanup in color_gamma file
  ...

1 files changed, 8 insertions, 59 deletions

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 9abfb482b615..dc0f94f02a82 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -12,7 +12,6 @@ menuconfig DRM
 	select HDMI
 	select FB_CMDLINE
 	select I2C
-	select I2C_ALGOBIT
 	select DMA_SHARED_BUFFER
 	select SYNC_FILE
 # gallium uses SYS_kcmp for os_same_file_description() to de-duplicate
@@ -64,6 +63,12 @@ config DRM_USE_DYNAMIC_DEBUG
 	  bytes per callsite, the .data costs can be substantial, and
 	  are therefore configurable.
 
+config DRM_KUNIT_TEST_HELPERS
+	tristate
+	depends on DRM && KUNIT
+	help
+	  KUnit Helpers for KMS drivers.
+
 config DRM_KUNIT_TEST
 	tristate "KUnit tests for DRM" if !KUNIT_ALL_TESTS
 	depends on DRM && KUNIT
@@ -74,6 +79,7 @@ config DRM_KUNIT_TEST
 	select DRM_KMS_HELPER
 	select DRM_BUDDY
 	select DRM_EXPORT_FOR_TESTS if m
+	select DRM_KUNIT_TEST_HELPERS
 	default KUNIT_ALL_TESTS
 	help
 	  This builds unit tests for DRM. This option is not useful for
@@ -392,64 +398,7 @@ menuconfig DRM_LEGACY
 	  Unless you have strong reasons to go rogue, say "N".
 
 if DRM_LEGACY
-
-config DRM_TDFX
-	tristate "3dfx Banshee/Voodoo3+"
-	depends on DRM && PCI
-	help
-	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
-	  graphics card.  If M is selected, the module will be called tdfx.
-
-config DRM_R128
-	tristate "ATI Rage 128"
-	depends on DRM && PCI
-	select FW_LOADER
-	help
-	  Choose this option if you have an ATI Rage 128 graphics card.  If M
-	  is selected, the module will be called r128.  AGP support for
-	  this card is strongly suggested (unless you have a PCI version).
-
-config DRM_I810
-	tristate "Intel I810"
-	# !PREEMPTION because of missing ioctl locking
-	depends on DRM && AGP && AGP_INTEL && (!PREEMPTION || BROKEN)
-	help
-	  Choose this option if you have an Intel I810 graphics card.  If M is
-	  selected, the module will be called i810.  AGP support is required
-	  for this driver to work.
-
-config DRM_MGA
-	tristate "Matrox g200/g400"
-	depends on DRM && PCI
-	select FW_LOADER
-	help
-	  Choose this option if you have a Matrox G200, G400 or G450 graphics
-	  card.  If M is selected, the module will be called mga.  AGP
-	  support is required for this driver to work.
-
-config DRM_SIS
-	tristate "SiS video cards"
-	depends on DRM && AGP
-	depends on FB_SIS || FB_SIS=n
-	help
-	  Choose this option if you have a SiS 630 or compatible video
-	  chipset. If M is selected the module will be called sis. AGP
-	  support is required for this driver to work.
-
-config DRM_VIA
-	tristate "Via unichrome video cards"
-	depends on DRM && PCI
-	help
-	  Choose this option if you have a Via unichrome or compatible video
-	  chipset. If M is selected the module will be called via.
-
-config DRM_SAVAGE
-	tristate "Savage video cards"
-	depends on DRM && PCI
-	help
-	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
-	  chipset. If M is selected the module will be called savage.
-
+# leave here to list legacy drivers
 endif # DRM_LEGACY
 
 config DRM_EXPORT_FOR_TESTS